Used Crm Electronic Ekko! Plus for sale (11,468)

Condition: ready for operation (used), Festo Electronic E.FEA-88 , serial no. according to photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos Nwodpfx Asi D U Ngeg Dof

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: M08L/8716, Offer Number: M08L/8716 Machinetype: 7 die - 7 blow warm forming header Info: bushing cut-off , PKO , IFO , 2 forma packs , PNP Transfer Make: NATIONAL FORMAX PLUS Type: FXP57S WF Constr. year: 2016 diameter range: 14-22 mm number of dies: 7 number of stations: 8 cutting length: 4-67 mm shaft length under head: 4-75 mm output - pieces/min: 175 press power: 200(126) to Nedpfxjwi Suls Ag Dowf max. outside dia. of round pie: 42 mm stroke: 150 mm Location: In our warehouse

Condition: used, Small Drilling/Milling Machine ISERT ELECTRONIC Njdpfx Ajxu H I Usg Djwf Travel X: 350 mm Travel Y: 300 mm Travel Z: 70 mm Rotation: 8000 / 9500 / 13500 / 20500 / 24000 RPM The machine could be used for drilling printed circuit boards or other use. The machine was controlled through a PC that is no longer present. Possibility to use it in manual Equipped with: 1 Milling Machine KRESS Voltage: 220 V mono Dimensions (L x W x H): 950 x 700 x 700 mm Weight: approx 60 KG

Condition: used, Container ZETA Plus with filter Model: 12 ZPC 2 Material: 316 L Nodob Tfw Njpfx Ag Dewf Max. operating pressure: 5 bar Temperature: 90 C° Weight: 110 kg

Condition: refurbished (used), Year of construction: 1980, functionality: fully functional, For sale is a drilling and milling machine from Alzmetall Nwjdpfexn T S Hex Ag Djf type Plus 3 DG The machine has been completely dismantled and overhauled. Inspection and test run possible at any time. Forklift available for loading

Condition: as good as new (ex-display), Reliable transmission of machine data, process parameters and diagnostic data to the controller For the connection of up to eight IO-Link devices Two Ethernet ports with integrated switch Integrated web server for configuration and diagnostics Simultaneous data exchange with the control and the IT world Technical data: Application area Application I/O modules for use in the control cabinet Electrical data Operating voltage [V] 18...30 DC Nominal voltage DC [V] 24 Max. Power consumption [VA] 2.4 Total current carrying capacity [A] 2 Inputs/outputs Total number of inputs and outputs 20 Number of inputs and outputs Number of digital inputs: 18 Number of digital outputs: 10 Inputs Number of digital inputs 18; (8 x 2 + 2 x 1) Input wiring digital inputs PNP Power supply [V] 24 Max. Current carrying capacity inputs total [mA] 1600 Input current limit [mA] 200 Short circuit protection digital inputs yes Short-circuit protection digital inputs yes Nsdpfoh N U Sujx Ag Dswf Overload resistance digital inputs yes Outputs Number of digital outputs 10 Circuit PNP Current carrying capacity per output [mA] 200 Short circuit protection yes Galvanically decoupled no Actuator supply of the outputs 24 V DC Interfaces Communication interface IO-Link Ethernet Transmission rate 10; 100 Protocol EtherNet/IP; Modbus TCP IO-Link master Transmission type COM1 (4.8 kBaud); COM2 (38.4 kBaud); COM3 (230.4 kBaud) IO-Link revision 1.1 SDCI standard IEC 61131-9 Number of ports Class A 8 Environmental conditions Ambient temperature [°C] 0...70 Storage temperature [°C] -20...70 Max. permissible relative humidity [%] 95 Protection class IP 20 Approvals / tests Shock/vibration stress EN60068-2-6; EN60068-2-27 Mechanical data Weight [g] 404,5 Dimensions [mm] 105.3 x 45.2 x 113.6 Materials Housing: PA Displays / Controls Display Switching status LED, yellow Operation LED, green Error LED, red Function LED, yellow Remarks Packaging unit 1 piece Electrical connection Screw terminals: ; Grid dimension: 20 mm

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Fanuc G-Tech 16i, table length: 500 mm, TECHNICAL DETAILS Nwodey Atwuspfx Ag Def X-axis travel: 600 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Table size: 500 mm x 500 mm MACHINE DETAILS CNC control: Fanuc G-Tech 16i Tool magazine: 120 stations Internal coolant: 70 bar EQUIPMENT 6-fold pallet changer 4th axis Knoll high-pressure system Note: The machine has already been dismantled.

Condition: ready for operation (used), 1 x Stitching unit 380 with Amrys 2 x Stitching headsd HK75 1 x Caliper control with reject 1 x Obluque sheet saddle monitor 1 x Remote control jogger inch 5 x Section feeders 370 with Amrys 1 x Cover folder feeder 554 with Amrys 1 x Three knife trimmer 449 with Amrys Nwsdpfsxya Eqsx Ag Def 1 x Muller Martini Perfetto stacker delivery 450

Condition: ready for operation (used), 1 x stitching unit 380 with Amrys 2 x stitching heads HK75 6 x section feeders 370 with Amrys ASIR3 1 x cover folder feeder 1554 with Amrys 1 x three knife trimmer 449 with Amrys Njdpfx Asvpaubsg Dowf 1 x OMG stacker delivery

Condition: ready for operation (used), 1 x stitching unit - 380 2 x stitching heads HK75Q 1 x remote control jogger inch 1 x oblique sheet saddle monitor 6 x section feeders 370 1 x cover folder feeder 1529 1 x three knife trimmer 449 1 x stacker delivery - Perfetto 450   Optional if needed; Njdexxnlpopfx Ag Dowf Centre cut for double production small size attachment for feeders additional stitching heads 

Condition: defective spare-parts repository (used), Year of construction: 1994, operating hours: 68,921 h, functionality: not functional, spindle bore: 70 mm, turning length: 1,500 mm, turning diameter: 500 mm, swing diameter over cross slide: 290 mm, quill stroke: 180 mm, spindle speed (max.): 2,800 rpm, overall weight: 3,200 kg, Good day, We hereby offer you, without obligation, a used, defective cycle lathe from the manufacturer Gildemeister. Manufacturer: Gildemeister Model: NEF 500 Plus Year of manufacture: 1994 Total operating hours: 68,921 hours Turning diameter: 500 mm Turning length: 1,500 mm Control system: Manual Plus Spindle bore diameter: 70 mm Speed range: 8 – 2,800 rpm Gear stages: 3 Maximum swing diameter over cross slide: 290 mm Spindle nose: DIN 55027 size 8 Tool holder type: C Tailstock quill stroke: 180 mm Machine weight: approx. 3.2 t Dimensions (L x W x H): 3.0 x 1.8 x 1.8 m Note: The above technical data have been taken from the operating manual, manufacturer brochures, or other sources, for the accuracy and completeness of which we cannot accept any liability. Scope of supply: 1 used Gildemeister NEF 500 Plus cycle lathe Condition: The cycle lathe is not operational because the control does not power up. The machine can be inspected under power in our workshop, but cannot be put into operation. We are therefore selling the machine as defective. We would be pleased if this machine is of interest to you. Nedpfoy Hr U Hjx Ag Djwf Your Serviceteam Mertens & Frowein GmbH

Condition: used, mileage: 159,050 km, power: 130 kW (176.75 HP), first registration: 12/2020, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 5, total length: 5,986 mm, total width: 2,040 mm, total height: 2,355 mm, loading space length: 2,850 mm, loading space width: 1,750 mm, loading space height: 1,600 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, soot filter, Internal vehicle number: 8663X ----Why autonext GmbH? One of the largest commercial vehicle exhibitions nationwide. Over 400 vehicles always in stock at all times - Largest selection at the best price. More than 1,000 satisfied customers per year - top customer ratings. WhatsApp Chat: ### Offer: Financing from 4.99% ### Nwedsymvn Nepfx Ag Def ----Good and well-maintained condition 1st owner, German vehicle, non-smoker vehicle Complete service history, maintained exclusively by Volkswagen Next service in 375 days Brakes front and rear as new Summer tires front and rear as new Winter tires rear as new All-wheel drive “4MOTION” Number of seats: 5 Roof rack with integrated rear ladder Reversing camera Audio navigation system Discover Media streaming & internet (touchscreen, USB) Cruise control system Air conditioning “Climatic” Reinforced damping and stabilizers, front and rear 230 V socket Equipped with 8 tires Summer tires on steel rims Winter tires on steel rims On request, we offer retrofitting of a trailer coupling for only 599 euros, and if possible, an upgrade of the towing capacity up to 3.5 t. ---- Special equipment: * Storage package 2 * Storage compartments: 2-DIN slot at the front under the headliner * Interior lighting in the cab: reading light in the front * Audio navigation system Discover Media streaming & internet (touchscreen, USB) * Voice control system * Multimedia interface 2 x USB (type C) in front * Mobile phone interface Bluetooth * Mobile online services App-Connect wired and wireless * Lockable glove compartment * Driver assistance system: environment monitoring system (Front Assist) with city emergency braking function * Driver assistance system: city emergency braking function * Full-size spare wheel including on-board tools and jack * On-board tools and jack * Mud flaps front and rear * Mud flaps front * Mud flaps rear * Winter package * Headlamp cleaning system (SRA) with heated washer nozzles and wash water indicator * Heated windshield washer nozzles and wash water level indicator * Wash water level indicator * Heated windscreen * Additional (air) heater * Driver/passenger airbag, passenger airbag deactivatable * Mounting rails for roof rack * Driver assistance system: fatigue detection sensor * Chassis: reinforced damping and stabilizers, front and rear * 2 remote foldable keys * Vehicle without model designation * Cruise control system incl. speed limiter * Air conditioning Climatic (driver’s cab) * Side marker lights * Emergency call system * Digital radio reception (DAB+) * Smoker package * Rear view camera * Seats in cab: Driver's seat Comfort Plus * 230V socket in driver’s cab * Rear step integrated into bumper Standard equipment: Anti-lock braking system (ABS), Drive type: all-wheel drive, Convex mirrors left and right, LED indicators integrated into exterior mirrors, Cab floor covering: rubber, Underbody drag coefficient paneling, Twin headlights, Grab handle on rear left D-pillar, Grab handle on rear right D-pillar, Electronic Stability Program (ESP), Driver assistance system: hill start assist, Driver assistance system: crosswind assist, Window in cargo/passenger compartment: fixed, front left, Window in cargo/passenger compartment: fixed, front right, Electric windows front, Veh

Condition: used, mileage: 81,050 km, power: 103 kW (140.04 HP), first registration: 12/2020, fuel type: diesel, overall weight: 3,500 kg, gearing type: mechanical, emission class: euro6, number of seats: 5, total length: 5,986 mm, total width: 2,040 mm, total height: 2,355 mm, Equipment: ABS, all wheel drive, central locking, electronic stability program (ESP), parking heater, soot filter, Internal vehicle number: 6616DX ----Why autonext GmbH? One of the largest commercial vehicle exhibitions nationwide. Over 400 vehicles immediately available at all times. Largest selection – Best prices. More than 1,000 satisfied customers per year – Top customer ratings. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Good and well-maintained condition Single owner, German vehicle, non-smoker vehicle Full service history maintained exclusively at Volkswagen As-new brakes front and rear All-wheel drive “4MOTION” Number of seats: 5 Tow bar, increased towing capacity 3,000 kg Reversing camera Nedpfxsymvpao Ag Djwf Auxiliary heater Audio system Composition Audio (radio, SD card slot, MP3 playback) Reinforced suspension and damping Exterior mirrors electrically adjustable and heated ---- Special equipment: * Storage Package 2 * Storage: 2 DIN compartments front under roof lining * Interior lights in driver's cab: front reading light * Tow bar: fixed ball head * Trailer stabilization program * Audio system Composition Audio (radio, SD card slot, MP3 playback) * Mobile phone interface Bluetooth * Spare wheel (matching drive tires) incl. on-board tools and jack * On-board tools and jack * Mud flaps front and rear * Mud flaps front * Mud flaps rear * Exterior mirrors electrically adjustable and heated * Chassis: reinforced suspension and damping * Remote keys (2) foldable * Side marker lights * Upholstery/trim: artificial leather * Entry step rear right * Exterior warning marking film * Additional heating (hot water) with stationary heating function and remote control Standard equipment: Driver’s airbag, anti-lock braking system (ABS), drive type: all-wheel drive, exterior mirror convex left, exterior mirror convex right, LED indicators integrated in exterior mirrors, cab floor covering: rubber, drag coefficient underbody cover, double headlights, entry handle at rear left D-pillar, entry handle at rear right D-pillar, electronic stability program (ESP), driver assistance system: hill start assist, driver assistance system: crosswind assist, fixed window front left cargo/passenger compartment, fixed window front right cargo/passenger compartment, electric front windows, laminated front windshield, vehicle without cargo area partition, 6-speed gearbox, A-pillar grab handles, rear wing doors without glazing, cab interior lights: LED, body/build: box van double cab standard, body variant: standard roof, child lock in cargo/passenger compartment, fuel tank: 75 L, radiator grille with upper chrome strip, cargo area partition behind 2nd row, adjustable steering column (steering wheel), headlight range adjustment, truck registration, engine 2.0 L - 103 kW TDI, multifunction display Plus, rear fog lamp, wheelbase 3,640 mm, tire repair kit, diesel particulate filter, low emission according to Euro 6d-TEMP, right sliding door with intermediate lock for opening limitation, SCR system (AdBlue technology), electromechanical power steering, driver cab seats: passenger seat adjustable, driver cab seats: driver seat adjustable, cargo/passenger compartment seats: 1st row, 3-seat bench, engine start/stop system, 12V sockets in driver's cab (2 units), front bumper in gray, daytime running lights, lashing eyes in cargo area, driver seatbelt warning system, immobilizer (electronic), heat-insulating glazing, central locking with remote control.

Condition: used, Year of construction: 2015, operating hours: 2,450 h, Equipment: all wheel drive, MAKE: BERGMANN TYPE: 2060R PLUS YEAR: 2015 CE: YES WORKING HOURS: 2450 TYRES/UNDERCARRIAGE: 80% POWER: 63KW ENGINE: CUMMINS WEIGHT: 4300KG Nwsdpfx Aey Hfd Ieg Dof OPTIONS: 6,000 KG PAYLOAD TYRES 80% ROTATING READY FOR WORK CENTRAL GREASING SYSTEM

Condition: like new (used), Year of construction: 2014, Kilia Kutter 50 Liter Meister Plus Vario Hand and Knee Operation Condition: Factory Overhauled with 6 Months Warranty. Nedpfx Aey Hkd Tsg Dewf Infinitely adjustable knife shaft drive (50 – 5100 RPM) with reverse operation (50 – 500 RPM) and infinitely adjustable bowl drive (7 – 20 RPM) Central lubrication for knife and plate shaft bearings Noise protection cover, manually operable knife cover, stainless steel, rustproof, 1 knife head with 6 parts, Electric knife shaft brake, Electric thermometer with digital display and automatic shutdown, Electric speed counter with digital display and automatic shutdown, Touchscreen with splash guard flap, Knife shaft drive power 22 kW, 400 Volts Bowl drive power 1.5 kW, 400 Volts

Condition: ready for operation (used), Year of construction: 2008, operating hours: 12,125 h, spindle motor power: 29,000 W, spindle speed (max.): 5,000 rpm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, number of axes: 6, This 6-axis EMCO Hyperturn 665MC Plus turn-mill centre was manufactured in 2008. It features a multi-axis CNC system with Y-axis and B-axis for complete machining of turned and milled parts. Equipped with integrated spindle motors on both main and counter spindles, it offers a spindle speed up to 5000 min-1 for the main and 7000 min-1 for the counter spindle. Includes a 24-position tool magazine and SINUMERIK 840D control. If you are looking to get high quality turning and milling capabilities consider the EMCO Hyperturn 665MC Plus machine we have for sale. Contact us for more information about this machine. Additional equipment • Tool turret: 12-position tool VDI 30 radial with directional logic for up to 12 driven tool stations • B-PowerMill: Motorised milling spindle with 24-position tool magazine, 210° swivelling range • Optional tool package: Includes stationary and driven tool holders, collet chuck holders, reducing sleeves, and operating spanners • Hollow clamping cylinder with draw tube / Part ejector and flushing through the counter spindle / Part pick-up device for finished parts • Part pick-up device for finished parts / Coolant device in the chip conveyor / High-pressure pump (14 bar) and fine filter • Flushing pumps (3.7 bar) / Control cabinet air conditioning unit / Electrostatic oil mist separator • Hydraulic unit / Machine light / Interface for foot switch / Signal lamp • Documentation including handwheel, PC keyboard, network preparation, tool monitoring, turning window, cleaning gun • Clamping device for main spindle: Hainbuch BZI 80 centre pull / Nodpfx Agjy Hty De Dowf Machine Benefits Technical Machine Benefits • Counter spindle: 22 kw / counter spindle: 0-7000 rpm • Main spindle: kk 6 (passage 65 mm) / counter spindle: kk 6 • Y-axis travel range: +/- 50 mm • C-axis for main and counter spindle • Counter spindle: 3-jaw chuck 210 mm • Approx. 40 capto c4 holders for milling spindle • Loader lm 1200 • Machine does not have shopturn programming. It must be programmed using iso code, whereby simple cycles are available for drilling, milling, swiveling, etc. • 12-station turret and a milling spindle

Year of construction: 1994, condition: ready for operation (used), English Translation A Berg & Schmit band saw in double-miter design including 20 new saw bands is available. Miter range: 60°-45°, cutting speed: 80m/min, cutting capacity round: 230mm, cutting capacity square: 230mm/230mm, cutting capacity rectangular: 280mm/150mm, machine dimensions X/Y/Z: approx. 1600mm/1000mm/1500mm, weight: approx. 350kg. The machine has a hydraulic oil leak. An on-site inspection is possible. Nodpfx Ajy Hvrieg Dewf

Condition: new, Year of construction: 2025, NEW MACHINE Equipment: 2 x nickel-plated air table 1000 x 1000 2 x HSS knives OPTIKNIFE knife changing device Tool kit 18.5" touch color display Technica Data: Cutting width 1,370 mm Insertion depth 1,450 mm Max. insertion height 165 mm Safety pressing pressure 30 daN Press pressure, min 150 daN Press pressure, max 5,500 daN Saddle speed return (0 - ...) 300 mm/sec Blade speed 45 cycles/min Nsdpfx Agexazbtj Dswf Residual cut, automatic, without cover plate 25 mm Residual cut, automatic, with cover plate

Year of construction: 2008, condition: used, very good condition - available at short notice The Foellmer Duplicator DigiTab 2010 Plus (printing - counting - marking = 1 operation) has a menu-guided operation via touchscreen display at the rear of the housing. The mobile and height-adjustable stand is positioned at the side of the delivery on most machines. Any number from 5 - 99999 can be set for the counting strip insertion. Infinitely variable adjustment of the strip length 20-200 mm and holding time approx. 0 - 10 sec. of the counting strip is possible. The Suptramat enables the control and waste sheets removed by the printer from the running production to be deducted from the total number and at the same time the packet size marked by strips is corrected accordingly. The total counter is used to record the total number of good sheets adjusted with the Suptramat. Nedpfoyguubox Ag Dowf To connect the DigiTab, you need a universal connection box for an interface with a potential-free or 24 V pulse directly from the machine or from a sensor.

Condition: new, Year of construction: 2025, NEW MACHINE Polar N92 PLUS Accessories: 2 Resopal air tables 750 x 750 2 HSS knives Standard cover plate Cover plate 40 mm (cutting width 50 mm), incl. control unit Nwsdpfx Aew D A Hnog Dof On-board tool Documentation Available now

Condition: new, Year of construction: 2025, NEW MACHINE Polar N78 PLUS Nwedpfxjxc Ughs Ag Def 2 Resopal air tables 75 x 75 cm, including support corners left/right 2 HSS knives Onboard tools 2.Cover plate 40 mm (cutting width 50 mm) including control documentation Available at short notice Technical specifications Cutting width 78 cm / 30.70" Insertion height 12 cm / 4.72" Insertion depth 78 cm / 30.70" Maximum installation height (without cover plate) 12 cm Table height 90 cm Electrical power (main drive) 3.45 kW / 4.75 H.P. Net weight 1350 kg / 2970 lbs

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, total height: 2,600 mm, total length: 2,200 mm, total width: 2,100 mm, overall weight: 3,600 kg, spindle speed (min.): 10,000 rpm, spindle speed (max.): 10,000 rpm, For sale is a high-quality and reliable CNC machining center of the type Hommel Unverzagt UVA 25 PLUS. This machine stands out for its compact design combined with high stability, making it the ideal solution for workshops that value precision and German engineering. Manufacturer: Hommel Unverzagt GmbH Model: UVA 25 PLUS Machine type: Vertical machining center Weight: approx. 3,600 kg (according to nameplate) Year of manufacture: 2008 Nsdpfx Aey Htd Njg Dswf Tool holder: SK 40 or BT 40 Control: SINUMERIK 828D PPU 240.2 Includes active cooling unit: Daikin oil cooler Interfaces: Connections for Profinet (PN), Ethernet (LAN), USB, and RS232 port. X-axis: approx. 725 mm Y-axis: approx. 460 mm Z-axis: approx. 460 mm Table surface: 760 x 420 mm Machine dimensions: approx. 2,200 mm x 2,100 mm x 2,600 mm Footprint: 3,500 mm x 3,000 mm Transport and loading can be organized throughout Europe at extra cost, upon request. Prices are subject to VAT. Inspection possible by appointment. Please contact us—our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase / sale BUYING & SELLING OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your machine? For further information or to contact us, please visit our website.

Condition: ready for operation (used), Year of construction: 2000, Available immediately from location: Nwjdpfxoy E I Ume Ag Def CNC bed milling machine MTE Model Kompakt Plus Year of manufacture 2000 Heidenhain TNC 410 Table 2200 x 750 mm Travel X/Y/Z 2000/800/800 mm Table load 4 t Spindle taper SK 50 Hydraulic tool clamping Spindle speeds 40 – 2500 rpm Spindle power 15 kW Total power requirement 30 kW Coolant system Weight 12 t Price: EUR 12,500 — plus VAT, ex location

Condition: used, functionality: fully functional, power: 92 kW (125.09 HP), fuel type: diesel, color: yellow, overall weight: 14,800 kg, tire size: 10.00 x 20, number of seats: 1, Year of construction: 2022, machine/vehicle number: 2477168, Equipment: all wheel drive, cabin, Year of manufacture: 2022 Engine: 92 kW (Isuzu) Weight: 14.8 t Dimensions (L x W x H): 7.89 x 2.41 x 3.04 m Reach: 9.24 m Digging depth: 5.93 m Tyres: 10.00 x 20 Displacement: 2.99 l Boom: VA Nedpjy Hhkdjfx Ag Dewf

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 700 mm, turning length: 5,500 mm, turning diameter: 1,000 mm, spindle bore: 105 mm, spindle speed (max.): 1,000 rpm, GURUTZPE AT 600 PLUS LATHE WITH GROUND BED, AUTOMATIC TURRET, AND NEW FAGOR 8058 CNC Nwsdpfx Agoyivado Dof