Used Crown Schubmaststapler Esr 1600 for sale (3,489)

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, Pedestrian pallet stacker Crown 1.0 EMT -3350 Type 1EMT Year of manufacture 1996 Lift height 3350 mm Load capacity 1.0 t Battery 24 Volt (2x 12 V) With charger New batteries Djdpfx Akoyv Emusajck

Condition: used, Year of construction: 2016, operating hours: 2,090 h, lifting height: 4,300 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Crown SCT 6020-1.3 electric forklift, year of manufacture: 2016, operating hours: only 2,090h, previous owner: German Armed Forces, rated load capacity: 1,300kg, lift height: 4,300mm, fork length: 800mm, fork extension: 1,200mm, sideshift, triplex mast with free lift, full cabin with heating, incl. charger, road-legal (StVZO) lighting, very good condition, immediately ready for use! We can provide you with a tailored leasing or financing offer upon request. Mr. Mihm (Tel. ...) will be happy to assist you. More information available on our website. Subject to prior sale and errors! Power steering, cabin included. = Additional information = Lifting capacity: 1,300 kg Djdpfx Akjyxkt Seajck Total height: 210 cm For further details, please contact Tobias Ebert.

Condition: used, Year of construction: 2016, operating hours: 2,534 h, lifting height: 4,300 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Crown SCT 6020-1.3 electric forklift truck, battery from 06/2020, year of manufacture: 2016, operating hours: only 2,534h, previous owner: German Armed Forces, rated load capacity: 1,300kg, lift height: 4,300mm, fork length: 1,200mm, side shifter, triplex mast with full free lift, full cab with heating, including charger, road-legal lighting as per StVZO, rear window defective, immediately operational! We are happy to offer you a leasing or financing option upon request. Mr. Mihm (Tel. ...) is at your disposal for any queries. Further details available on our website. Subject to prior sale and errors excepted! Power steering, cab = More information = Dcedsyxkt Eopfx Akask Lifting capacity: 1,300 kg Overall height: 200 cm Please contact Tobias Ebert for more information.

Condition: used, Year of construction: 2017, operating hours: 2,416 h, lifting height: 4,300 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Crown SCT 6020-1.3 electric forklift, battery dated 29.06.2020, year of manufacture: 2017, operating hours: only 2,416h, previous owner: German Armed Forces, rear window missing, rated load capacity: 1,300 kg, lift height: 4,300 mm, sideshift, triplex mast with full free lift, full cab with heater, overall height: 2,000 mm!, battery 06/2020 incl. charger, STVZO-compliant lighting, very good condition, immediately ready for use! Leasing or financing offers available on request. Mr. Mihm (tel. ...) will be happy to assist you. Further information available on our website. Subject to prior sale and errors! Cab, rental possible. = Further information = Lifting capacity: 1,300 kg Dcsdpeyxktfofx Akaek For further information, please contact Tobias Ebert.

Condition: used, Year of construction: 2016, operating hours: 1,185 h, lifting height: 4,300 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Crown SCT 6020-1.3 electric forklift, year of manufacture: 2016, hours: only 1,185 h, previous owner: German Armed Forces (Bundeswehr), rated load capacity: 1,300 kg, lift height: 4,300 mm, fork length: 800 mm, sideshift, triplex mast with full free lift, full cabin with heating, including battery charger, road lighting (STVZO-compliant), very good condition, immediately operational! Leasing or financing offers available on request. Mr. Mihm (phone) will be happy to assist you. For more information, please visit our homepage. Subject to errors and prior sale. Cabin, rental option available. = Further information = Lifting capacity: 1,300 kg Please contact Tobias Ebert for further details. Dodpfxsyxkr Uo Akasck

Condition: used, Year of construction: 2016, operating hours: 2,747 h, lifting height: 4,300 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Crown SCT 6020-1.3 electric forklift, year of manufacture: 2016, operating hours: only 2,747h, previous owner: German Federal Armed Forces (Bundeswehr), rear window missing, rated capacity: 1,300kg, lift height: 4,300mm, hydraulic side shifter, triplex mast with free lift, full cabin with heater, overall height: 2,000mm, battery from 06/2020 incl. charger, road lighting (in accordance with StVZO), very good condition, immediately operational! Leasing or financing offers available upon request. Mr. Ebert (tel.) will be happy to assist you. For more information, please visit our homepage. Subject to errors and prior sale. Cabin, rental possible = Additional information = Dcodpfx Aoyxkr Iekaok Lifting capacity: 1,300 kg For further details, please contact Tobias Ebert.

Condition: used, Year of construction: 2016, operating hours: 1,227 h, lifting height: 4,300 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Crown SCT 6020-1.3 electric forklift, battery: 2017, year of manufacture: 2016, operating hours: only 1,227h, previous owner: German Armed Forces, rated load capacity: 1,300kg, lift height: 4,300mm, fork length: 1,200mm, side shift, triplex mast with full free lift, full cabin with heating, incl. charger, road-legal lighting (STVZO), in very good condition, immediately ready for use! On request, we can provide you with a leasing or financing offer. Mr. Mihm (Tel.) will be happy to assist you. Further information available on our homepage. Subject to prior sale and errors. Power steering, cabin Dcodpeyxkruefx Akask = Further Information = Lifting capacity: 1,300 kg Overall height: 200 cm Please contact Tobias Ebert for more information.

Condition: used, Year of construction: 2016, operating hours: 2,658 h, lifting height: 4,300 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Crown SCT 6020-1.3 electric forklift, battery: 06/2020, year of manufacture: 2016, operating hours: only 2,658h, previous owner: German Armed Forces, rated load capacity: 1,300kg, lift height: 4,300mm, fork length: 1,200mm, sideshift, triplex mast with full free lift, full cab with heating, incl. charger, road-legal lighting (STVZO), very good condition, immediately available for use! Leasing or financing offers available upon request. Mr. Mihm (Tel. ...) will be pleased to assist you. For further information, please visit our homepage. Subject to prior sale and errors. Cab, rental possible. = Additional Information = Lift capacity: 1,300 kg Overall height: 200 cm Dsdpfxjyxkrhe Akaeck Please contact Tobias Ebert for more information.

Condition: repair required (used), functionality: limited functionality, Year of construction: 2010, operating hours: 1,001 h, load capacity: 1,600 kg, lifting height: 5,250 mm, load center: 600 mm, fuel type: electric, overall weight: 1,428 kg, Crown 2300 Series Electric Pallet Truck, year of manufacture approx. 2010/2011, purchased used by us in 2019, relatively low operating hours, little used. The pallet truck is operational but also in need of repair: see photos for damage, it is also leaking lubricant in some areas. Vehicle weight with max. battery weight: 1,428 kg Lifting capacity with vertical mast (A=2,500 mm, B=600 mm): 1,600 kg Lifting capacity with vertical mast (A=5,230 mm, B=600 mm): 700 kg Lifting capacity with vertical mast (A=4,100 mm, B=600 mm): 1,020 kg Lifting capacity with vertical mast (A=3,000 mm, B=600 mm): 1,600 kg We are offering it at a low price (asking price €800 negotiable), preferably to self-collectors. Otherwise, shipping costs apply. If you have any questions or need more information, feel free to send us a message or call us. Dodpfoytqc Uox Akajck

Condition: good (used), operating hours: 5,579 h, Crown SC 5360 1.8 Electric Forklift The SC Series forklifts offer the power, maneuverability, and reliability needed to meet the demands of both the job and the operator. The SC Series stands out due to its optimal balance of meticulous attention to detail, advanced technology, a solid foundation, and ergonomic design. Whether used indoors or outdoors, the SC Series forklifts provide a work environment that makes the operator's life easier. The D4 armrest can be easily adjusted vertically and horizontally with one hand. The SC forklifts offer excellent all-around visibility. Robust double-T profile masts withstand longitudinal, lateral, and torsional bending forces. Integrated sideshift with fork carriage protects the cylinders and helps prevent hydraulic oil leakage. Electric motors designed and manufactured by Crown offer the highest thermal protection ratings in the industry. Symmetrical box frame design to reduce frame distortion from collisions. Robust steering axles with heavy-duty tapered roller bearings withstand impacts from uneven floors and loading ramps. Easy maintenance Crown Access 123 technology provides reliable, real-time on-board diagnostics and control of all forklift systems. This significantly simplifies maintenance and also builds operator confidence. The e-GEN braking system replaces the conventional friction brake, resulting in performance, service, and cost benefits. It enables controlled use of the regenerative engine brake depending on operating conditions, reducing pedal effort and long-term maintenance requirements. The battery is accessible from above for quick and easy maintenance. Technical Specifications Manufacturer: Crown Model: SC 5360 1.8 Electric 3-Wheel Forklift Weight: 2.88 t Standard Tires: 2x/2 Model Series: SC 5300 Overall Width: 1123 mm Turning Radius: 1.694 m Fork Length: 1600 mm iForks Weighing Forks Drive System: Diesel Nominal Load Limit at Load Center: 1.8 t Dcjdpfx Akjya Da Hoask Center of Gravity: 500 mm Lift Height: 3.5 m Voltage: 48 V Travel Motor(s): 9.6 kW Lift Motor(s): 7.9 kW Travel Speed ​​with/without Load: 16 km/h Lifting Speed ​​with/without Load: 0.56/0.37 m/s Lowering Speed ​​with Load: 0.56 m/s Overall Height: 2260 mm Battery Weight: 0.962 g New steering pump motor (2025) Operating hours: 5579 iForks weighing forks for forklifts, new price €4300 Financing through our bank is also possible. komplett-konzept.leasingo.de More items – new and used – can be found in our shop! Shipping costs abroad on request!

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 68 h, load capacity: 1,600 kg, fuel type: electric, fork length: 1,150 mm, drive type: Elektro, Low lift truck Load centre of gravity: 600 Condition: Ready for use and fully functional Technical condition: good Front tyres type: polyurethane Rear tyres type: polyurethane Battery voltage: 24V Description: Dcjdpfx Aoxmb Uyokaok Initial lift,

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, turning length: 300 mm, turning diameter: 300 mm, spindle bore: 52 mm, spindle speed (max.): 4,500 rpm, controller model: FANUC CNC, The machine can be inspected with a lead time of three days. TECHNICAL DETAILS Maximum turning diameter: approx. 300 mm Maximum turning length: approx. 300 mm Spindle bore diameter: approx. 52 mm Maximum main spindle speed: 4,500 rpm Tool turret: 12 stations MACHINE DETAILS Control system: FANUC CNC Machine weight: approx. 2,200 kg Operating hours: approx. 6,458 h Spindle hours: approx. 4,300 h Dcjdpfjznb Ntex Akask Voltage: AC 380 V (with or without transformer) Rated power: 14.97 kVA Full load current: 22.74 A Interrupting capacity: 5 kA Short-circuit capacity: 10 kA Power of the electric motor according to the manufacturer: 7.5 kW EQUIPMENT Technical documentation Powerful main spindle Robust machine construction for high dimensional accuracy Tool turret with rapid indexing Compact design with low space requirements User-friendly CNC control High reliability Low maintenance requirements Complete technical documentation

Condition: used, ZERBST DP/S3 cnc Heavy Duty Lathe Manufacturer: ZERBST (Germany) Year: 1991 Machine Type: Heavy Duty Facing & Centre Lathe simens control Maximum Turning Diameter: Ø1,600 mm Distance Between Centres: 4,700 mm Spindle Bore: 110 mm Main Motor Power: 55 kW Spindle Speed: 3.5 – 450 rpm Bed Design: Triple guideway cast iron bed Control : Siemens Dcjdpfxoztff No Akaek Tailstock: Powered tailstock Thread Cutting: Yes Maximum Workpiece Weight: Up to 12,500 k

Condition: used, Used Lödige model FKM 1600D stainless steel ploughshare mixer. 1600 litre total capacity and 550-1100 litre working capacity. Ploughshare mixing blades direct driven by 21-35 kW 400 volt 3/50 740-1479 rpm motor through Flender type 185 102 025-2-1 gearbox rated 31kW with 1500rpm input and 115rpm output. Unit has (2) MK 30/55 choppers with air purged seals driven by 5.5kw motors. Has (2) side inspection doors and pneumatically operated drop door discharge. Dcedjzn Nmyjpfx Akask

Condition: new, fuel type: diesel, overall weight: 1,600 kg, empty load weight: 1,600 kg, Year of construction: 2024, GÜNTER GROSSMANN GG1600 MINI EXCAVATOR, 3-cylinder KUBOTA Günter Grossmann GG1600 Kubota Thanks to close collaboration between Günter Grossmann and Kubota, the new GG1600 excavator has been created. Track excavator Günter Grossmann GG1600. Mini excavator on tracks GG1600, KUBOTA engine, KDK hydraulic pump, VS EATON compressor motor. Very good quality. Standard equipment Excavation bucket 400mm Additional accessories for the machine can be purchased. Model GG1600 is a great machine for the most demanding construction, electrical, and hydraulic companies. We guarantee after-sales service. The excavator is manufactured based on solid European technology. SPECIFICATIONS Model: GG1600Y Brand: Günter Grossmann Dedoggai Ujpfx Akaock Weight: 1600kg Bucket capacity: 0.045 m³ / 200kg Engine: KUBOTA Engine power: 15 kw/2300r/min Main pump: Japan – KDK Japan Swing motor: American – EATON USA Travel motor: Korea – KOREA DONGHYUN WORKING RANGE Max. digging depth: 1650 mm Max. vertical digging depth: 1650 mm Max. digging height: 2610 mm Rotation radius: 360° Optional accessories available for order: Ground drill Grab Digging tooth Rake Narrow bucket 200 mm Narrow bucket 380 mm Leveling bucket 500mm Leveling bucket 800mm Quick coupler Breaker hammer GG1600 €13,400 excluding VAT GG800 Bn83wivh €5,900.00 including VAT €7,139.00 including VAT GG1000 €9,909.00 including VAT €8,190.00 excluding VAT transport costs on request We deliver to companies and private individuals in the Netherlands and Belgium! With each delivery, you will receive a VAT invoice and (factory) warranty. -Click on 'email this advertiser' and provide your contact details, and we will send you the webshop details. -tel (7 days a week from 8:00 to 23:00) -Collection is possible by appointment, also in the evening and on weekends. Easy payment... -via our webshop -Cash or card payment upon collection/delivery -Via iDeal (request a link via email) For GG 800 details, see our other advertisement. For more information, please call or email us. Lease negotiable.

Condition: ready for operation (used), functionality: fully functional, mileage: 37,457 km, power: 55 kW (74.78 HP), first registration: 09/2016, overall weight: 3,500 kg, fuel type: diesel, color: orange, axle configuration: 4x4, empty load weight: 1,950 kg, next inspection (TÜV): 02/2027, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, operating hours: 4,738 h, Equipment: air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 as a winter service vehicle From first owner = former municipal/government vehicle Major engine inspection including timing belt, water pump, oil, oil filter, and fuel filter was carried out at 37,454 in 08/2026 2,584 hydraulic operating hours 4,738 total operating hours 37,457 kilometers Including Kif front sweeper, type CM 1600, 1,300 mm wide, manufactured in 2019 (as new/never used in snow) Including Gmeiner salt spreader, type Husky 500V FS, manufactured in 2019 (as new/used twice for testing) 4x4 all-wheel drive – hydrostatic all-wheel drive Rear view camera Wheelbase 1,600 mm Track width 1,055 mm Fresh water tank 180 liters Unladen weight approx. 1,950 kg Permissible total weight 3,500 kg Length: 4,016 mm / Width: 1,210 mm / Height: 1,970 mm (without attachments) Driving speed 0-40 km/h Working speed 0-24 km/h Noise reduction package Working speeds selectable 1,600 - 2,400 rpm (ECO/Standard/MAX) Engine: water-cooled 4-cylinder VW industrial diesel engine Low emissions, Euro 5 Fuel tank approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics Circuit 1 (front) 0–50/0–70 l/min 225 bar Circuit 2 (rear) 0–20/25/30 l/min 195 bar Dedpfx Akjzrrvxjaock Hydraulic service brake via foot pedal Cab with air-suspended driver's seat Air conditioning/heating Water treatment system Fire hydrant connection Dosing system Permissible total weight: 3500 kg Unladen weight: 1950 kg The spreader is driven and operated by the machine's hydraulics. Other applications are possible through additional attachments from HAKO, such as sweepers, snow plows, and lawnmowers (not included in the scope of supply) Errors, changes, and prior sale are subject to change. We sell exclusively according to our general terms and conditions and with the exclusion of any warranty. Errors, changes, and prior sale are subject to change. We are available for you continuously from Monday to Friday from 9:00 a.m. to 5:00 p.m., on Saturdays by prior appointment, and telephone appointments can be arranged outside of these opening hours. We will gladly accept your existing used equipment/vehicle in part exchange. Sales to commercial businesses and exporters will be given priority, and this applies to our entire vehicle inventory. The above information is non-binding, and errors/changes and prior sale are subject to change!

Condition: ready for operation (used), operating hours: 4,738 h, functionality: fully functional, mileage: 37,457 km, power: 55 kW (74.78 HP), first registration: 09/2016, overall weight: 3,500 kg, fuel type: diesel, color: orange, axle configuration: 4x4, empty load weight: 1,950 kg, next inspection (TÜV): 02/2027, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, Equipment: air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 as a winter service vehicle From first owner = former municipal/government vehicle Major engine inspection including timing belt, water pump, oil, oil filter, and fuel filter was carried out at 37,454 in 08/2026 2,584 hydraulic operating hours 4,738 total operating hours 37,457 kilometers Including Kif front sweeper, type CM 1600, 1,300 mm wide, manufactured in 2019 (as new/never used in snow) Including Gmeiner salt spreader, type Husky 500V FS, manufactured in 2019 (as new/used twice for testing) 4x4 all-wheel drive – hydrostatic all-wheel drive Rear view camera Wheelbase 1,600 mm Track width 1,055 mm Fresh water tank 180 liters Unladen weight approx. 1,950 kg Permissible total weight 3,500 kg Length: 4,016 mm / Width: 1,210 mm / Height: 1,970 mm (without attachments) Driving speed 0-40 km/h Dsdszrru Iopfx Akajck Working speed 0-24 km/h Noise reduction package Working speeds selectable 1,600 - 2,400 rpm (ECO/Standard/MAX) Engine: water-cooled 4-cylinder VW industrial diesel engine Low emissions, Euro 5 Fuel tank approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics Circuit 1 (front) 0–50/0–70 l/min 225 bar Circuit 2 (rear) 0–20/25/30 l/min 195 bar Hydraulic service brake via foot pedal Cab with air-suspended driver's seat Air conditioning/heating Water treatment system Fire hydrant connection Dosing system Permissible total weight: 3500 kg Unladen weight: 1950 kg The spreader is driven and operated by the machine's hydraulics. Other applications are possible through additional attachments from HAKO, such as sweepers, snow plows, and lawnmowers (not included in the scope of supply) Errors, changes, and prior sale are subject to change. We sell exclusively according to our general terms and conditions and with the exclusion of any warranty. Errors, changes, and prior sale are subject to change. We are available for you continuously from Monday to Friday from 9:00 a.m. to 5:00 p.m., on Saturdays by prior appointment, and telephone appointments can be arranged outside of these opening hours. We will gladly accept your existing used equipment/vehicle in part exchange. Sales to commercial businesses and exporters will be given priority, and this applies to our entire vehicle inventory. The above information is non-binding, and errors/changes and prior sale are subject to change!

Condition: ready for operation (used), functionality: fully functional, mileage: 37,457 km, power: 55 kW (74.78 HP), first registration: 09/2016, overall weight: 3,500 kg, fuel type: diesel, color: orange, axle configuration: 4x4, empty load weight: 1,950 kg, next inspection (TÜV): 02/2027, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, operating hours: 4,738 h, Equipment: air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 as a winter service vehicle From first owner = former municipal/government vehicle Major engine inspection including timing belt, water pump, oil, oil filter, and fuel filter was carried out at 37,454 in 08/2026 2,584 hydraulic operating hours 4,738 total operating hours 37,457 kilometers Including Kif front sweeper, type CM 1600, 1,300 mm wide, manufactured in 2019 (as new/never used in snow) Including Gmeiner salt spreader, type Husky 500V FS, manufactured in 2019 (as new/used twice for testing) 4x4 all-wheel drive – hydrostatic all-wheel drive Rear view camera Wheelbase 1,600 mm Track width 1,055 mm Fresh water tank 180 liters Unladen weight approx. 1,950 kg Permissible total weight 3,500 kg Length: 4,016 mm / Width: 1,210 mm / Height: 1,970 mm (without attachments) Driving speed 0-40 km/h Working speed 0-24 km/h Noise reduction package Working speeds selectable 1,600 - 2,400 rpm (ECO/Standard/MAX) Engine: water-cooled 4-cylinder VW industrial diesel engine Low emissions, Euro 5 Fuel tank approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics Circuit 1 (front) 0–50/0–70 l/min 225 bar Circuit 2 (rear) 0–20/25/30 l/min 195 bar Hydraulic service brake via foot pedal Cab with air-suspended driver's seat Air conditioning/heating Water treatment system Fire hydrant connection Dosing system Dcsdpfxjzrruze Akajk Permissible total weight: 3500 kg Unladen weight: 1950 kg The spreader is driven and operated by the machine's hydraulics. Other applications are possible through additional attachments from HAKO, such as sweepers, snow plows, and lawnmowers (not included in the scope of supply) Errors, changes, and prior sale are subject to change. We sell exclusively according to our general terms and conditions and with the exclusion of any warranty. Errors, changes, and prior sale are subject to change. We are available for you continuously from Monday to Friday from 9:00 a.m. to 5:00 p.m., on Saturdays by prior appointment, and telephone appointments can be arranged outside of these opening hours. We will gladly accept your existing used equipment/vehicle in part exchange. Sales to commercial businesses and exporters will be given priority, and this applies to our entire vehicle inventory. The above information is non-binding, and errors/changes and prior sale are subject to change!

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 650 mm, travel distance Z-axis: 800 mm, overall weight: 71,400 kg, spindle speed (max.): 105 rpm, spindle motor power: 100,000 W, number of axes: 2, Horizontal machining centre manufactured in 2004. This IRLE IRD 1600 CNC features a maximum pipe diameter processing capability of 1,625 mm and a maximum pipe length of 13,200 mm. It supports a maximum pipe wall thickness of 70 mm and can handle pipe weights up to 250 kN. If you are looking to get high-quality machining capabilities, consider the IRLE IRD 1600 CNC machine we have for sale. Contact us for further details. - Max. Pipe Diameter to be Processed: 1,625 mm- Min. Pipe Diameter to be Processed: 406 mm- Max. Pipe Length to be Processed: 13,200 mm- Min. Pipe Length to be Processed: 6,000 mm- Min. Pipe Wall Thickness: 12 mm- Max. Pipe Wall Thickness (Copying Process): approx. 40 mm- Max. Pipe Wall Thickness (CNC Operation): 70 mm- Max. Pipe Weight to be Supported: 25500 kg- Height between Hall Floor and Pipe Inlet: 800 mm- Total Machine Length: approx. 24,000 mm- Total Machine Width: approx. 4,100 mm- Total Height from Floor to Top of Clamping Vise: 5,000 mm- Total Machine Weight: approx. 71400 kg- Operating Voltage: 400 V, 3-phase, 50 Hz- Control Voltage: 220 V DC / 50 Hz- Nominal Operating Current: 400 A- Intermediate Bed - Bed Length: approx. 3,950 mm- Intermediate Bed - Bed Width: approx. 1,800 mm- Intermediate Bed - Bed Height (incl. chassis): approx. 600 mm- Intermediate Bed - Travel Speed on Foundation Rails: 500 - 5,000 mm/min- Intermediate Bed - Drive Motor Power: 5.5 kW- Headstock - Faceplate Speed Range: 7 - 105 min⁻¹- Headstock - Motor Speeds: 300 - 4,500 min⁻¹- Headstock - Motor Power: 100 kW- Headstock - Motor Power (S1 Duty Cycle): 105 kW- Headstock - Max. Faceplate Torque (S1 Duty): 33,000 Nm- Headstock - Characteristic Speed: 27 min⁻¹- Headstock - Main Spindle Diameter (Front Bearings): 300 mm- Faceplate (X-Axis) - Faceplate Diameter: approx. 1,950 mm- Faceplate (X-Axis) - NC Tool Support Travel Range: approx. 650 mm- Faceplate (X-Axis) - Tool Support Feed Rate (Infinitely Variable): 0.5 - 1,500 mm/min- Faceplate (X-Axis) - Max. Achievable Feed Force: 25 kN- Feed Gearbox (Z-Axis) - Headstock Feed Travel on Machine Bed: 800 mm- Feed Gearbox (Z-Axis) - Feed Rate (Infinitely Variable via AC Servomotor): 0.5 - 200 mm/min- Feed Gearbox (Z-Axis) - Rapid Traverse Speed: 1,500 mm/min- Feed Gearbox (Z-Axis) - Feed Force: 30 kN- Feed Gearbox (Z-Axis) - Feed Motor Torque: 27 Nm- Pipe Clamping Steady Rests - Clamping Range: 406 - 1,625 mm- Pipe Clamping Steady Rests - Pipe Weight Capacity per Steady Rest: 150 kN- Pipe Clamping Steady Rests - Adjustable Clamping Force: 10 - 200 kN- Pipe Clamping Steady Rests - Max. Adjusting Speed of Centrally Moving Clamping Crossbars: 600 mm/min Dedjzr Nmuopfx Akaeck

Year of construction: 1992, condition: excellent (used), Mixaco Mixer CM 600 with one container and two trolleys. The Mixaco Mixer was in use for pigments in the chemical industry, is in good condition and ready to use. Djdpfx Ashgixzokaock Built in 1992 You can inspect the Mixaco CM 300 in our warehouse Arnsberg/ Germany.

Condition: good (used), Year of construction: 1995, functionality: fully functional, turning diameter over cross slide: 267 mm, spindle bore: 76 mm, center height: 228 mm, center width: 1,500 mm, quill stroke: 229 mm, quill diameter: 75 mm, total length: 3,030 mm, total width: 1,200 mm, total height: 2,000 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 20 rpm, overall weight: 2,300 kg, Conventional lathe, center high 228 mm, between centers 1500 mm, bore Ø 76 mm, 16 speed 20 - 1600 rpm, motor 9,3 kw, camlock 8'', dimensions 310x120x200 cm, weight ca. 2300 kgs; equipement: pneumatic chuck SCHUNK ROTA Ø 315 mm, coolant device, 3-jaws chuck Ø 315 mm, several jaws, live center, tool post PARAT WD with toolholders, steady rest, drilling chuck, lamp, manual, cabinet Dedpfx Aoypud Uekajck

Condition: excellent (used), The Colechester Bantem 1600 is a small compact lathe. It was mainly used in the educational sector providing training for its safe use to students. It was a well maintained machine, will little use and as a result has little or no backlash in its carriage's. It comes complete with 3 & 4 Jaw chucks, faceplates, and a set of gears for expanding the speed range of its spindle. It also has a range of tool holders and cutting tools. It has an integrated cabinet of the safe storage and easy access for its accessories. Dcedpszmhmvjfx Akaok This machine is a strong, sturdy and compact machine and is suitable for may applications.

Condition: excellent (used), Year of construction: 2009, operating hours: 78,099 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 25 mm, clearance between the columns: 520 mm, displacement volume: 71 cm³, injection pressure: 1,550 bar, injection weight: 65 g, opening stroke: 925 mm, total height: 2,800 mm, overall weight: 10,700 kg, Equipment: documentation/manual, Arburg 520 S 1600 290/70 2K incl. Multilift H – a well-maintained, fully functional 2-component injection molding machine. The machine comes from a top-notch production facility. According to the operator, machine availability was always a top priority: the system was regularly and carefully maintained and operated continuously with additional oil filtration. It is in very good, operational condition and can be put into operation shortly after connection. Equipment and technical highlights: • Year of construction 2009 • 12.3 million cycles / 78,099 operating hours in automatic mode • 2-component version with horizontal injection unit 290 and vertical injection unit 70 • Injection unit 1: screw diameter 25 mm, max. 71 cm³ • Injection unit 2: screw diameter 18 mm, max. 21 cm³ • Opening stroke 925 mm Dodpoxzix Asfx Akaeck • Electric rotary table • 12-zone hot runner system integrated • 3 x core pull • 2 x blow-out, including control for needle valve • Interfaces for temperature controllers and dryers • Various customer-specific inputs and outputs Including Arburg Multilift H, load capacity 6 kg: • 2 x vacuum • 5 x double-acting grippers • Z-axis servo, 800 mm • C, G, X, and B axes pneumatic • Various inputs and outputs, including gripper monitoring The machine is fully functional. Documentation/manual available. An excellent opportunity for a user looking for a well-maintained and immediately usable 2K injection molding machine with automation.

Year of construction: 2011, condition: used, Suitable for automatically brushing (rounding edges or deburring) the teeth on HM circular saw blades. Accessories: Sawblade holder, Stepless variable speed control of the sawblade drive, Dsdpfx Aeu Dk Edekajck Pre-selectable timer. Circular saw blade diameter: 1600 mm Power of geared motor: 0,1 kW Brush motor performance: 0,75 kW Connected load approx.: 400 V / 50 Hz Weight approx: 310 kg Dimensions W x D x H approx.: 2400 x 850 x 1550 mm colour: blue/grey

Condition: used, Year of construction: 2010, Laser cutting machine Manufacturer: Eurolaser Type: LCS XL-1600 Year of manufacture: 2010 Power: 200 W Working area: 2,270 mm x 1,600 mm Electrical data: max. 6 kW / max. 32 A Dedpfeyvk R Eex Akajck Previous application: Cutting of acrylic glass Laser source renewed in 2021 ä3826