Used Cyclone Schauenburg for sale (230)

Condition: new, power: 310 kW (421.48 HP), fuel type: diesel, empty load weight: 8,636 kg, maximum load weight: 17,364 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x2, wheelbase: 3,150 mm, brakes: engine braking, color: silver, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden. ClassicSpace, Active Brake Assist, Mercedes PowerShift 3, Metal housing, 1x comfort seat, 1x bunk, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, navigation system, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO (power take-off), differential lock, fog lights, beacon, leaf/air suspension, trailer coupling (air + electrics), aluminum fuel tank, 2nd axle liftable, 2nd axle steering/forerunner, underrun protection, roof hatch, green environmental sticker. Wheelbase: 3,150 mm. 8t front axle, 13t hypoid rear axle (crown gear 485), 7.5t steered/liftable/relievable leading axle, electronic braking system with ABS and ASR, disc brakes with partial protection on front and rear axles, electronic parking brake, additional parking brake on front axle, condensate monitoring for compressed air system, front axle stabilizer, aluminum front underrun guard, smoker package, seat belt monitoring, lower bunk, residual heat usage, auxiliary hot water heater, additional thermal insulation, PSM 2nd generation, hill-start assist, ClassicSpace, central locking system, light sensor, rain sensor, Mercedes PowerShift 3, PowerShift Advanced, driving program economy/power, navigation system, axle load monitoring, Multimedia Cockpit Interactive, Remote Online, Remote Connect, pre-installation for toll system, LED daytime running lights, High Performance Engine Brake, cyclone pre-filter for coarse dust, gearbox oil cooling, ESP, lane keeping assistant, attention assistant, traffic sign assist, Active Brake Assist 5, auxiliary drive MB 131-2c pump. Frame length approx. 5,400 mm! Frame height approx. 1,140 mm! New vehicle from stock with day registration on 16.12.2025! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors. Cjdpfxox Ury Sj Ad Negt

Condition: used, Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Cgodey Ifdqspfx Ad Not Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: used, mileage: 287,000 km, power: 355 kW (482.67 HP), first registration: 09/2022, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2022, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), parking heater, DAF XF480 AT-Boretec HS2, approx. 1,900 operating hours, well-maintained, last service at 1,760 operating hours. The HS2 system truck is a bentonite mixing and recycling system designed for use in complex drilling projects. With its 45 kVA generator, the HS2 provides a powerful and reliable solution. The system is equipped with ten cyclones and three centrifugal pumps, each rated at 7.5 kW, ensuring efficient processing and transfer of drilling fluids. The shaker features three dual-deck flatscreens with six screens in total, allowing for thorough screening and cleaning. The total tank capacity is 12,000 liters, divided into three tanks, providing ample capacity for drilling fluids. Additionally, the HS2 includes a 1,100-liter fresh water tank. The HS2 system truck is integrated in a BDF container construction, offering maximum flexibility and mobility for operations at various sites. It also comes with a tank capacity increased by 4,000 liters, resulting in a total of 12,000 liters. Construction Description: SYSTEMTRUCK HS2 The most proven all-rounder with a total tank volume of 12m³ (5 + 5 + 2), sold over 200 times since 2015 and continuously improved for ongoing successful operation. Optimally designed for drilling rigs in the 15–25 t performance class. The three KSB centrifugal pumps, each with a flow rate of 1,100 l/min (7.5 kW), are powered by an underfloor-installed 50 kVA generator. Max. cleaning performance of up to 150 m³/day or 15 m³/h Centrifuge option: For drilling rigs with small, high-pressure bentonite quick-runner pumps to significantly increase service life; 10 hydrocyclones to separate fine solids: 2.2 bar. Mixing and recycling system in an ISO container frame Also usable as a full-fledged permanent mixing plant with 2 × 5 m³ working tanks. Empty weight, depending on chassis and due to high-quality lightweight construction, is approx. 17 t Csdjy Ify Sopfx Ad Negt Mounted on a 3-axle, 26 t chassis 3 dual-deck flatscreen shakers with 6 screens for removal of coarse solids 1,100 l fresh water tank capacity TECHNICAL DATA: SYSTEMTRUCK HS2 CARRIER VEHICLE: Permissible gross vehicle weight: 26 t BDF CONTAINER L x W x H (mm): 7,450 x 2,550 x 2,950 Total weight (incl. truck): 17,000 kg TANK SYSTEM: Total tank volume: 12,000 l Tank 1: 5,000 l Tank 2: 5,000 l Tank 3: 2,000 l Fresh water tank volume: 1,100 l RECYCLING SYSTEM Shaker: 3 dual-deck flatscreen units Total number of screens: 6 Shaker inclination adjustment: manual (hydraulic) Number of hydrocyclones: 10 (4?) Number of centrifugal pumps: 3 Centrifugal pump rating: 7.5 kW Centrifuge: 1 Number of agitators: 3 Agitator power (Tank 1): 1.5 kW Agitator power (Tank 2): 1.5 kW Agitator power (Tank 3): 0.9 kW Cleaning capacity: up to 150 m³/day GENERATOR Generator output: 50 kVA Emission standard: Stage V Installation: Underfloor AT-Boretec HS2 HS2 Bentonite Mixing and Recycling System, year of manufacture 2022 DAF truck first registration: 2019 Truck with AT-Boretec HS2 with registration as a self-propelled work machine. Bentonite mixing and recycling systems – The use of the HDD system truck provides the following advantages: * Significant savings on fresh water and bentonite * Cost savings on bentonite disposal due to recycling * Substantial reduction in drilling downtime by eliminating waiting times for water refueling, mixing, and disposal * Strong reduction in ...

Condition: used, Year of construction: 2006, Kahl Twin Screw Extruder is a machine manufactured by Kahl in 2006. Currently stored in Germany, it comes equipped with a fine grain hopper, fine grain discharge, fine grain sack, a belt unit (Type: BTK 1510-0), water addition, extruder, supply air blower, reconditioned in 2016. It also includes dust removal, tumbler sieve, dedusting, final packaging, belt dryer, product hopper, pipe chain conveyor, cyclone, rotary valve, distributor, dust sack, exhaust air blower, air stream rotation dryer, feed table, mixer, and an additional air supply blower and belt dryer. The delivery terms are FCA. Equipment: 1 x feed table, 1 x tube chain conveyor, 1 x mixer 1 x water addition, 1 x extruder, 1 x supply air fan, 1 x cyclone, 1 x rotary valve, 1 x distributor, 1 x belt dryer, 1 x product hopper, 1 x tube chain conveyor, 1 x fine grain hopper, 1 x fine grain discharge, 1 x fine grain bag, 1 x supply air fan, 1 x belt dryer, 1 x rotary valve, 1 x dust bag, 1 x exhaust fan, 1 x airflow rotary dryer, 1 x dedusting, 1 x tumbling screen, 1 x bar removal, 1 x final packaging 1 x belt unit, type: BTK 1510-0 refurbished 2016 Cgodpfx Ajvfxqyod Njt

Condition: used, HERBOLD Zigzag Separator (Gravity Separator) Type SZS 630/212 Separation channel: 630 mm wide With 7.5 kW blower Material: ordinary steel With inlet cyclone and rotary valve Cgjdpoy Iclfjfx Ad Net

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 1,245 kg, rotational speed (min.): 560 rpm, total height: 1,830 mm, total length: 1,760 mm, total width: 1,370 mm, We are a company with more than 30 years of experience in the trade of machinery for the plastics industry. We have the offered machines in stock and can carry out tests on them on your material. The new, efficient mills of the RG-36E - (EKO) series with a very good price/quality ratio are mainly used for grinding various types of soft and hard material. The optional system of receiving the milling based on a blower and separating cyclone, provides comfortable and safe operation for the operator. The mills in this series are characterized by their compact, compact design and ease of operation. Each RG type mill is additionally equipped with a flywheel and belt drive. The knives can be repeatedly sharpened and adjusted against each other as they wear. Motor overload protection and safe control voltage as standard. Csdordgkcjpfx Ad Njgt Rotor diameter (mm): 480 Rotor width (mm): 800 Power (kW): 22 kw Knives on rotor (pcs): 6 Fixed knives (pcs): 4 Weight (kg): 1245 P&F Wartacz was founded in 1990 and now we are the oldest trading company in the PTSz industry continuously selling injection molding machines, mills, crushers, coolers, conveyor belts peripheral equipment and spare parts. Possible purchase with extraction and cyclone instead of drawer Unused machine available from stock, possible tests before purchase. (dozens of machines in stock)

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 2,870 kg, rotational speed (min.): 560 rpm, total height: 2,880 mm, total length: 2,890 mm, total width: 1,610 mm, We are a company with more than 30 years of experience in the trade of machinery for the plastics industry. We have the offered machines in stock and can carry out tests on them on your material. New, efficient mills of RG-56E - (EKO) series with a very good price/quality ratio are mainly used for grinding various types of soft and hard material. The optional system of receiving the milling based on a blower and separating cyclone, provides comfortable and safe operation for the operator. The mills in this series are characterized by their compact, compact design and ease of operation. Each RG-type mill is additionally equipped with a flywheel and belt drive. The knives can be repeatedly sharpened and adjusted against each other as they wear. Motor overload protection and safe control voltage as standard. P&F Wartacz was founded in 1990, and today we are the oldest trading company in the PTSz industry continuously selling injection molding machines, mills, crushers, coolers, conveyor belts peripheral equipment and spare parts. Cgedpfxorbgy Es Ad Nst Rotor diameter (mm): 560 Width of rotor (mm): 800 Power (kW): 30kw Knives on rotor (pcs): 10 Fixed knives (pcs): 4 Weight (kg): 2870 Possible purchase with extraction and cyclone instead of drawer Unused machine available from stock, possible tests before purchase. (dozens of machines in stock)

Condition: new, Year of construction: 2022, functionality: fully functional, overall weight: 6,500 kg, total height: 3,700 mm, total length: 2,510 mm, total width: 2,060 mm, We are a company with more than 30 years of experience in the trade of machinery for the plastics industry. We have the offered machines in stock and can carry out tests on them on your material. XC series mills are designed for grinding both soft and hard plastics Stainless steel housing and bearing lubrication system will ensure quiet and stable operation Each model is equipped with an ammeter Versions with cyclones are available Control cabinet on Simens components Before purchase possibility of tests on customer's material. If you have any questions, please contact us at the e-mail address or telephone number provided. P&F Wartacz was founded in 1990 and now we are the oldest trading company in the PTSz industry continuously selling injection molding machines, mills, crushers, coolers, conveyor belts peripheral equipment and spare parts. Rotor diameter (mm): 820 Rotor width (mm): 1050 Power (kW): 75 kw Knives on rotor (pcs): 33 Fixed knives (pcs): 6 Weight (kg): 6500 Possible purchase with extraction and cyclone instead of drawer Unused machine available from stock, possible tests before purchase. (dozens of machines in stock) Cgsdpfx Asrbh U Asd Nst

Year of construction: 2025, condition: new, to sell the demonstration machine at a special price Our MVZ 7.5 granulator is suitable for shredding thin-walled parts and/or for post-shredding wood chips. More details after a test with your material. Larger systems are also available as an option The price is only for the shredder as shown in picture 1 - fan, cyclone and filter are options. Motor: 7.5 kW *larger systems on request (4 to 75 kW) Throughput up to 120 kg/h *depending on screen and material Much higher throughput rates can be achieved with the secondary shredding of wood chips. Details after the test with about 30 kg. Rotor diameter: 180 mm 6 rotary knives each 225 mm 4 stationary knives each 225 mm Dimensions: 930x730x1420mm weight: 450 kg, suction nozzle: 100 mm, Screens: 6.8 and 15 mm - other screens available, Price per sieve: €390. Price set replacement knife: 579 € Suitable e.g. fur: - Plastic waste of all Art.-No Various materials - HDPE, LDPE, PP, PS. PC, PA - biomass -Wood - Herbs etc. Cgjdpsd N Dn Dofx Ad Nst Parts from injection molding, blow molding, injection molding scrap, small bottles, cables, small pipes, profiles, etc

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, AS-07251-Alfa Laval Clarifier Module 10 m3/h ALFA-LAVAL PURE SOX (SWPX 810 SGV-34CGL) CLARIFIER MODULE, 316SS. Minimum capacity: 10,000 L/H Offer of 4 identical units Max bowl speed: 7200 RPM, rated at 10,000 LPH, bowl volume 15 L, sludge capacity 9.4 L, liquid discharged under pressure, solids discharge pump with cyclone tank, 35 KW motor 460/3/60/1728 RPM, Pure SOx scrubber, unitized on a common skid with all valves, piping, control panel, tools, spares and manual Csdpfx Adow Ap I Aj Nsgt Year of Manufacture: 2017

Condition: used, mileage: 823,150 km, power: 340 kW (462.27 HP), first registration: 04/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2024, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, DAF XF460 FT SC hydraulic tractor unit----Nutzfahrzeuge Göppl GmbH - DAF authorized dealer---- EZ: 01.04.2016 HU: 04/2024 SP: 10/2023 Service: .000km Equipment: * Space Cab cabin * Mechanical cabin suspension * Roof spoiler, adjustable * Compressed air horns, 2 sets * Sun visor * Side paneling * Driver's seat: Luxury Air + armrest * Passenger seat: Basic * Upper bunk * Lower bunk with drawer * Refrigerator or cool box * Navigation radio * CB radio * Truck phone * Air conditioning * Auxiliary heating * Auxiliary air conditioning * DAF Night Lock * Adaptive cruise control with FCW and AEBS * Predictive Cruise Control * Engine MX13, 340kW/462 HP * Automatic idle shutdown after 5 minutes * 12-speed AS-Tronic transmission * AS-Tronic light * Rear axle ratio: 2.64 * ZF-Intarder * Tires: * -Front: 385/65R22.5 Cgodpfx Adsy H T R As Not * -Rear: 315/70R22.5 * ALCOA alloy wheels * Axle load monitoring * Wheelbase: 3.80m * Suspension: * -Front Parabola 8.0t * -Rear: 13.0t air suspension * Aluminum fuel tank: 845 liters * AdBlue tank 90 liters * Dust protection shield * Transmission auxiliary drive (PTO) * Single-circuit hydraulic system * Storage box * Air intake at the top with cyclone filter Optional: * Installation of OBU * Speedometer check * New general inspection / TÜV * New service (X+Y) * New mattress * New protective covers Viewing and test drive possible by arrangement at the Weiden location. ----Nutzfahrzeuge Göppl GmbH Weiden - Regensburg - Leupoldsgrün - Bamberg - Nuremberg DAF authorized dealer - DAF service partner - FIAT-Professional Service Partner Subject to errors and prior sale Sale to commercial customers only

Condition: used, Used Oxymat O500 PSA industrial oxygen generator made in 2012 and with capacity 40.6 m3/hour. Containerised system that includes the following equipment: Csdpfeyt Rc Iex Ad Nogt - Almig 45 belt air compressor, cyclone separators, air receiver, Donaldson DCO 360 AB dryer, Donaldson ultrafilter, Oxymat 2-column O500 system, oxygen receiver, Oxymat control panel, Rix compressor, low oxygen gas detection system. - Not suitable for medical oxygen.

Condition: new, MFR is a stand-alone machine intended to produce pallets on a smaller scale. How does it work? The operator manually feeds the machine with boards and the boards are then automatically chamfered. The chamfered boards are thereafter collected in a magazine. Machine specification: Standard performance Operators: 1 Length: Chamfering unit 3,7 m, total 5,9 m with the chamfered board magazine (2,2 m) included Width: 1,2 m Height: 1,7 m Power: 5 kW, 3x400 V+N Pneumatic system: 7 bar compressed dried air: 100 L/min Should be filled and controlled: Container for lubricating oil Cyclone hose diameter: 100 mm Cyclone fan capacity: 1000 m³/h Machine capacity: 12 boards/min (max length 1600 mm) Standard equipment: 1 separate electric motor 3 kw 2800 r/m 2 cutters 4000 r/m Cgodpfx Adjwduvno Nst

Year of construction: 2004, condition: used, Biconical dryer model SBC-14000 manufactured by LLEAL in 304 stainless steel. Volume: Codpjx Uzmhjfx Ad Negt - Total: 1,400 liters - Usable: 910 liters Vacuum group: - ROBUSCHI KRVS-21/S/T-02 liquid ring vacuum pump - PEDRO GIL RVB.22.20.2 rotary piston (roots) vacuum pump - Cyclone - 304 stainless steel condenser - Condenser vessel Documentation: - CE certificate - Operating manual - Drawings - Electrical diagrams

Condition: good (used), Year of construction: 2014, operating hours: 8,035 h, functionality: fully functional, machine/vehicle number: MH0017-000100, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: fanuc, controller model: 31i, operating hours of spindle: 6,000 h, New Doosan horizontal machining center type NHP 8000 with Fanuc control unit type 31i Cgjdpfxswu Rgqj Ad Nst Included equipment and options: Pallet centering system 800*800 Coolant supply with hand gun High-pressure coolant 70 bar, 7.5 kW with cyclonic filtration Automatic tool changer Tool load management Chip conveyor Renishaw RMP60 workpiece probe TS27R tool probe

Condition: good (used), Year of construction: 2013, Complete heating system, but without fuel extraction from the storage room, with cyclone for flue gas dust removal, already dismantled. Cgjdpfx Adjytra Uj Not

Year of construction: 2018, condition: used, consisting of: roasting cyclone, green coffee transport, manual control, smoke burner Codpoy D Tyxsfx Ad Njgt

Condition: new, Year of construction: 2026, 200L sandblasting cabinet is an efficient and professional device designed for precise cleaning and surface preparation of metal and other hard materials. Thanks to a blasting gun with a compressed air control valve integrated into the handle, the operator can precisely control the blasting force, allowing safe work on both delicate components and heavy-duty structures. The cabinet is designed for intensive use in industrial and workshop environments. Main advantages Adjustable blasting gun – allows pressure control directly at the handle for maximum precision Ergonomic workspace – illuminated cabinet ensures comfortable and safe operation, even during long work cycles Durable steel construction – resistant to mechanical damage and corrosion, built for heavy-duty workshop use Air efficiency – air consumption of 400–700 L/min enables effective blasting of a wide range of components Versatile application – ideal for wheels, automotive parts, and industrial components Construction and technology The 200-liter sandblasting cabinet features a spacious working chamber measuring 760 × 510 × 470 mm, allowing convenient handling of larger components. Its rigid steel frame and sealed cabinet design ensure operator safety and limit dust emission into the environment. An extraction port with a diameter of ø 63 mm enables connection to an external dust extractor or cyclone system, significantly improving visibility and workplace cleanliness. Precision and performance Adjustable pressure settings and the ergonomic blasting gun design allow the operator to tailor parameters to the material type and required precision. This makes the unit suitable for both delicate cleaning of light alloys and intensive removal of paint coatings, rust, and industrial contaminants. Air consumption in the range of 400–700 L/min ensures continuous and stable operation without compromising quality. Applications The 200L sandblasting cabinet is intended for professional users, including: Automotive and motorcycle workshops Industrial plants and tool rooms Metal restoration companies Custom manufacturing and technical service providers Paint shops and electroplating facilities Cedey E Hnfopfx Ad Negt Ideal as a metal sandblaster, it performs well wherever precise surface preparation is required before processes such as painting, galvanizing, welding, or bonding. Standard equipment Sandblasting gun with pressure control valve in the handle Integrated cabinet lighting Built-in protective gloves Transparent inspection window Technical specifications Air consumption: 400–700 L/min Working capacity: 200 L Power supply: 230 V Weight: 46 kg Cabinet dimensions: 760 × 510 × 470 mm Total height with stand: 1410 mm Extraction port diameter: ø 63 mm Additional information: self-assembly required.

Condition: like new (used), Year of construction: 2021, operating hours: 494 h, functionality: fully functional, power: 15 kW (20.39 HP), type of cooling: air, Equipment: CE marking, documentation/manual, type plate available, Operating hours total: 494 h Load hours: 237 h Maintenance freshly performed -The variable speed screw compressor NOBEL with 'DNair2' microprocessor control is already factory-prepared for the SMS module (optionally available under: 9062744) -The controller communicates in plain text; all important operating states can be read directly. -The controller has an RS 485 interface Features: Thermal control valve compressor block POWERSYSTEM separate radial fan, temperature controlled for optimal cooling Very good accessibility for all maintenance work Rotation direction monitoring using phase sequence relay without dryer, standard with galvanized cyclone separator tank Technical details: Model: Powersystem NOBEL 15-10 DV Pressure bar: 10 Delivery rate L/min: 840-2100 Motor kW/HP: 15/20 Voltage Volt/Hz: 400/50 Noise level dB (A): 68 Weight: 250 Kg The machine can be demonstrated on site under power if desired. Csdpfx Aoqd Uvued Nogt All information without guarantee Errors and prior sale excepted Sale EXW free loading from warehouse Hessisch Lichtenau. Sale exclusively to commercial buyers, excluding any liability for material defects. Liability for damages resulting from injuries to health, body, or life and grossly negligent and/or intentional breaches of my duties as a seller remains unaffected. This offer is exclusively aimed at entrepreneurs (commercial users) or dealers. No sale to consumers/end customers.

Condition: new, Year of construction: 2026, KDP350 Cabinet Sandblaster is an efficient surface treatment and cleaning machine for metal components, designed for professional workshops, industrial facilities, and refurbishment services. The 330-liter working chamber and two side doors with full-seal gaskets ensure convenient access and dust-free operation. The set includes a DC15 cyclone dust extractor, which effectively removes dust generated during operation. This unit is ideal for sandblasting wheels and other metal parts requiring precise cleaning. Key Features of the KDP350 Sandblaster Large working chamber – 330 liters capacity allows processing of larger components. Cgjdpfx Asw H N R Sod Nst Two side doors – on the right and left sides for easy loading and part handling. Dust-free operation – thanks to sealing gaskets and extraction ports (63 mm and 90 mm). Gun with ceramic nozzles – includes 4 interchangeable tips (4, 5, 6, 7 mm) for precise blasting. Illuminated work area – improves visibility and accuracy during operation. Integrated gloves – abrasion-resistant and protect the operator’s hands. Compatible with various abrasives – such as quartz sand, glass beads, silicon carbide, emery, and plastic granules. Standard Equipment DC15 cyclone dust extractor with filter and hose 12V fluorescent lamp (powered by 230V, with switch) 2 integrated rubber gloves Blasting gun with 4 ceramic nozzles (sizes: 4, 5, 6, 7 mm) 4 protective films for the viewing window 2 dust extraction ports: 63 mm and 90 mm diameter 2 side doors with full-circuit sealing User manual in Polish Technical Specifications of the KDP350 Sandblaster Specification Value Working capacity 330 L (0.33 m³) Operating pressure 4 - 8 bar Air consumption 400 - 700 l/min Air inlet 1/4" quick coupling Viewing window area 580 x 270 mm Doors 2 pcs (left and right sides) Dust extraction ports Ø63 mm and Ø90 mm Internal dimensions 890 x 655 x 360/610 mm External dimensions 960 x 720 x 1500 mm Weight 88 kg Note: The machine is delivered in parts and requires self-assembly according to the included manual.

Condition: new, Year of construction: 2026, The sandblasting cabin is a device used in industry, car workshops and renovation works. It is used to remove surface layers from various materials, such as metal, wood or glass. The cabin has side openings and telescopic cylinders, which allows the processing of long workpieces. The standard equipment includes a dust extraction system, a set of nozzles, a gun and protective stickers for the visor. Thanks to it, you can effectively and precisely remove surface layers from various materials. Product characteristics: The 350 liter top opening sandblaster for KDP350TOPPLUS profiles is a specialized, reliable and professional tool that will ensure precise and effective cleaning and treatment of metal surfaces. Its advanced solutions and high quality make it one of the best products on the market, which will surely satisfy demanding customers and ensure failure-free and safe operation. The sandblaster is a device that has been specially designed to remove surface layers from various materials. Thanks to the side openings, it allows the processing of long workpieces, which allows for even greater versatility and flexibility in use. Telescopic cylinders are installed in the cabin door, which makes it easier to open and close, and thus increases the comfort of use. As standard, the cabin is equipped with a dust extraction system that protects against inhalation of harmful dust during operation. Thanks to this tool, work is safer and more comfortable. KDP350TOP PLUS technical parameters: WORKING CAPACITY 330L (0.33m3) OPERATING PRESSURE 4 - 8 bar AIR CONSUMPTION 400 - 700 l/min AIR CONNECTION 1/4" (INCH) QUICK RELEASE VIEW AREA 580x270mm SIDE OPENING DIMENSIONS 200 x 180mm DRAIN CONNECTION fi 63mm and 90mm CAB INTERNAL DIMENSIONS (Width x Depth x Height lowest/highest point) 890 x 655 x 360/610 mm DIMENSIONS 960x720x1500mm WEIGHT 64 kg Standard equipment Cgjdpom Nccisfx Ad Njt DC15 cyclone exhaust Foot pedal to control airflow Working field lighting - 12 V fluorescent lamp with 230 V power supply with switch 2 high-quality work gloves made of rubber, integrated with the device 2 suction (vent) connections with a diameter of 64 mm and 90 mm for connecting a suction device Sand blasting gun with eight replaceable ceramic nozzles 4 pieces of replaceable protective film for the window, viewfinder front door with rubber perimeter seals for dust-free operation Manual in English We kindly inform you that the device requires self-assembly. We kindly inform you that the device requires self-assembly. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, The front-opening sandblasting booth is a significant convenience for large and heavy workpieces. Telescopic actuators mounted in the door facilitate opening. As a standard, the sandblaster has a built-in dust extractor generated during sandblasting. Equipped with a set of nozzles, a gun and protective stickers for the visor. Machine description Dust-free operation of the device is ensured by the use of circumferential gaskets, which allows you to perform work in an environmentally friendly manner. The sandblasting hose is placed in the lower part of the collection container. Drain hole allows quick change of blasting material. The sand blaster is used for cleaning and processing various types of surfaces, e.g. removing rust, paint, deposits from metal surfaces, e.g. automotive parts, engines, fittings, housings, wheels, rims, etc. The following can be used as an abrasive: , silicon, glass beads, plastic sand, emery and other materials. KDP350TOP technical parameters WORKING CAPACITY 330L (0.33m3) OPERATING PRESSURE 4 - 8 bar AIR CONSUMPTION 400 - 700 l/min AIR CONNECTION 1/4" (INCH) QUICK RELEASE VIEW AREA 580x270mm DRAIN CONNECTION fi 63mm and 90mm CAB INTERNAL DIMENSIONS (Width x Depth x Height lowest/highest point) 890 x 655 x 360/610 mm DIMENSIONS 960x720x1500mm WEIGHT 64 kg Standard equipment DC15 cyclone exhaust Working field lighting - 12 V fluorescent lamp with 230 V power supply with switch 2 high-quality work gloves made of rubber, integrated with the device 2 suction (vent) connections with a diameter of 64 mm and 90 mm for connecting a suction device Sand blasting gun with eight replaceable ceramic nozzles 4 pieces of replaceable protective film for the window, viewfinder front door with rubber perimeter seals for dust-free operation Manual in Polish We kindly inform you that the device requires self-assembly. Cgjdpfjm Ncb Eex Ad Net We kindly inform you that the device requires self-assembly. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, functionality: fully functional, Plastic Granulation Line + for Spare Parts The line includes: -Extruder: CINCINNATI MILACRON CM65HP, year of manufacture 1996 -Granulating head -Granulate cooling system -Cyclone: GAMART -Raw material pneumatic conveying system ADDITIONAL EQUIPMENT -Single-screw co-extruders – total of 9 units Cgsdpfx Adsyda Ege Njt -Raw material transport: -Pneumatic (powders, granules) -Mechanical (screw conveyors, 2x chain-type redler conveyors) -2 x trough mills – for grinding PVC profiles Technical condition: equipment is fully operational, currently in use in production Applications: -Plastic granulation (PVC, other types) -Co-extrusion Documentation and photos available upon request.

Condition: excellent (used), Year of construction: 2000, 2 static spreading plate separators for the extraction of filler sand 1 x type: CC1180 ST and 1 x type: CC1180R Pick-up size: 4-5 mm End product: up to 150 µm Electric drive 7.5 and 11 kW Cgsdpsqi Hcgofx Ad Njt in addition a cyclone - model: Hurriclone from PM-Technologies

Condition: used, incl. cyclone, frame, blower (Image 1 without Heger dust collection silo) 1/7 Frame 1,520 x 1,470 x 2,450 mm 2/7 Pipe package 3/7 Frame 1,500 x 1,500 x 2,800 mm 4/7 Frame 2,600 x 1,520 x 2,400 mm Csdpfx Adoy Atr Ej Nogt 5/7 Cyclone 6/7 Pipe package 7/7 Blower Additional images available