Used Darley Mf 2502 for sale (1,057)

Condition: excellent (used), Item description: Kemppi FastMig KM 400 welding machine + FastMig MF 33 wire feeder ----- Condition of the item: The welding machine is in perfect condition. An inspection and functional test on-site can be arranged at any time. Blsdpjzilhpsfx Amzsk

Condition: used, Year of construction: 2025, operating hours: 2 h, Operating hours: 2, First registration: 06/30/2026. New tractor with dealer pre-delivery registration. Standard equipment / technical data: Engine, Rated power (ISO) 82 / 110 kW/hp at 2200 rpm, Max. power 86/115 kW/hp at 2000 rpm, Max. torque 460 Nm at 1600 rpm, Manufacturer / Type: Agco Power / AP 44MBTN-D5, Low-emission engine, 4 cylinders / 4.4l, 4V, STAGE 5, Controlled turbocharger, SCR catalyst, DOC - diesel oxidation catalyst, SCR particulate catalyst, Hood - single-piece, foldable, Exhaust on the right side in front of the cab, Fuel tank capacity 198 liters / AdBlue 18 liters. Transmission / PTO: 16/16-speed Dyna-4, SpeedMatching, 40 km/h, PowerControl control on the left with load-sensing reversing shuttle, 4-stage load shifting, Permanently cooled wet disc clutches with independent lubrication system, Dual-speed PTO: 540 / 540E / 1000, PTO switching electrically in the cab, PTO START / STOP button on the rear, left fender. Bedpfxsyvmq Is Amzjlk Hydraulics / Lift: Open system (OpenCenter) 58 l/min total flow rate, max. 200 bar, 2 control valves with hydraulic couplings: 1x single/double acting, MR + 1x single/double acting, NL, SST, Quick coupler Cat. 3 with balls and catch baskets Cat. 3/2, Lower link control, 5,200 daN maximum lifting force, 2 external lifting cylinders, Adjustable lift struts on both sides and 2 lateral stabilizers, EHR with external control on both fenders. Electrical equipment: Thermo start, 120 A alternator, Battery disconnect switch (electrical), Power supply (12 Volt) for external devices with plug. Axles / Additional weights: Rear axle ND with flange hub, Oil-cooled disc brakes, Height-adjustable automatic trailer hitch, Fenders, external width rear 2.00 m, without extensions, Front weight carrier with integrated drawbar and drawbar pin. Driver's seat: Low-vibration mounted standard cab with standard roof, ventilation and heating, air conditioning, Integrated safety frame with tinted glazing, Doors on both sides with safety steps, Steering column adjustable in height and inclination, Air-suspended driver's seat with armrests, swivel adapter, safety belt, 2 large telescopic exterior & wide-angle mirrors, Interior mirror, Analog-digital instrument panel (SIS), Radio preparation with antenna and speakers, 4 work lights front and rear on the cab roof, 2 driving lights in the hood and on the handrails, 2 work lights on the rear fenders, Rear window wiper / washer system, All-wheel drive front axle with switchable differential lock. Special equipment: With fuel tank protection, PowerControl & Brake on Neutral (clutch effect), 100 l/min, Open Center hydraulic system, Oil flow coupling (58+42 l/min), Leakage oil collector on quick couplings, 3 control valves: 1x MR, dw, EA, SST + 1x dw, NL, SST + 1x dw, NL, SST + free return, 2.5t front lift, 1 hydraulic line set, electrical socket, 480/70R38 ADJ Ø1.69m & 380/70R28 ADJ, Rear fender extensions - wide, Air conditioning, Cab with mechanical suspension, Telescopic exterior & wide-angle mirrors, Co-driver/passenger seat with belt, Air-suspended driver's seat, automatic adjustment with safety belt, swivel adapter & armrests, Rear window wiper/washer system, Battery.

Condition: good (used), 5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: MF 04 520-HN -Price: per piece Bledpfx Asb A Hzromzek -Quantity: 4 available -Weight: 0.2 kg/piece

Year of construction: 1992, condition: used, Welding fume filter, welding fume extraction, soldering fume extraction, small dust extractor -Manufacturer: Messer Lincoln mobile welding fume extraction -Type: "Fumatech" MF 1100 -Drive: 1.1 kW Blsdpjqwprgsfx Amzjk -Suction arm: length 3530 mm -Transport dimensions: 1200/560/H2320 mm -Weight: 84 kg

Condition: used, Gas and air filters, air filters -Manufacturer: Maxitrol -Type: GF65 MF-DN65 -Dimensions: 245/199/H190 mm Bodpfed D Iq Dsx Amzslk -Weight: 4.5 kg

Condition: good (used), G Webb Automation MiniFill screw feed doser feeding onto weigh platform. Perfect for packing powders, granules, coffee etc into bags. Bledpfx Aem Sg Hcjmzsk

Condition: excellent (used), Year of construction: 2011, Behringer Eisele HCS 160 MF including sorting and feed magazine, air filtration system, and much more. The machine will arrive at the end of August and will then be refurbished. The photos show the original condition. Blsdpezhki Aofx Amzjk

Condition: used, Year of construction: 1979, Table dimensions 1300-800 mm Weight 4,7 to. Bljdpfx Amozhcizszok Year 1979 x-travel 1000 mm angular milling head ja documentation ja serial number 733 weight of the machine ca. 4,7 t

Condition: new, Year of construction: 2026, _____Mounting category I + II Working width approx. 5.80 - 6.60 m Swath width approx. 1.20 - 1.80 m Transport width approx. 2.75 m Transport height approx. 3.70 m (with tine arms mounted) Transport height approx. 3.18 m (with tine arms dismounted) Transport length approx. 4.66 m Rotor diameter 2.74 m Tine arms per rotor 10/10 Double tines per arm 4 Tire size, rotor chassis 3 x 16/6.50-8 Tire size, transport chassis 10.0/75 - 15.3 Power requirement approx. 19 kW / 26 hp Required hydraulic connections 1 x single-acting Rotor height adjustment mechanical PTO speed rpm 540 Standard PTO shaft included PTO shaft profile 1 3/8", 6-piece Freewheel in the secondary drive included Blsdpozgqrbofx Amzjk Warning signs included Lighting included Weight approx. 1350 kg Optional equipment: - Individual lifting, electric preselection - Tandem axle with wheels 16/6.50-8 Internal number 14394 Net price: 17,900.00 EUR Gross price: 21,301.00 EUR Location: null

Condition: new, Year of construction: 2026, _____Category I+II mounting Bjdpfx Aezgqq Domzelk Working width approx. 6.60 m Transport width approx. 2.90 m Height in transport position approx. 3.30 m Number of rotors 6 Number of tines per rotor 6 Tine loss protection standard Tire size 16/6.50-8 Power requirement approx. 30 kW / 41 hp Required hydraulic control valves 1x single-acting PTO speed rpm 540 PTO shaft with overload protection (star ratchet) PTO shaft profile 1 3/8", 6-piece Warning signs standard Lighting optional accessory Weight approx. 822 kg Special equipment: - Lighting with LED Internal number 14392 Net price: 10,300.00 EUR Gross price: 12,257.00 EUR Location: null

Condition: new, Year of construction: 2026, _____Mounting category I+II Working width approx. 3.85 m Swath width approx. 0.70 - 1.55 m Transport width approx. (with tine bars removed) 1.68 m Transport length approx. 2.34 m Rotor diameter 2.96 Number of tine arms per rotor: 10 Number of double tines per arm: 4 Tire size for rotor chassis: 2x 16/6.50-8 Tandem axle Optional accessories Power requirement approx. kW/hp 20/27 Required hydraulic connections: - Height adjustment of rotor: mechanical PTO speed: 540 rpm PTO shaft Overload protection (star ratchet) PTO shaft profile: 1 3/8", 6-piece Warning signs: optional accessory Lighting: optional accessory Bledpfx Aozgqq Romzok Weight approx. 520 kg Special equipment: - Set of warning signs with LED lighting - 1 set of tandem axles with 16/6.50-8 wheels Internal number: 14393 Net price: 6,900.00 EUR Gross price: 8,211.00 EUR Location: null

Condition: used, Year of construction: 2019, Paint application machine with reverse-running metering roller. Application machine for primers and top coats. Adjustable speeds via frequency converter for transport, application roller, and metering roller. Control panel with touch screen for setting all machine parameters. - Manufacturer: Cefa/Sorbini - Type: SMARTCOATER MF-EVO - Year of manufacture: 2019 - Working width: 1.300 mm - Working height: 880 mm - 940 mm - Workpiece height: 3 - 80 mm - Operating side: right - Paint application roller ~ 50 - 60 Shore - Application quantity ~ 4-50g/m² - Roller diameter: 250 mm - Dosing roller: 173 mm - Dosing roller with switchable reverse operation Bsdpfxszf N Tuj Amzslk - Double diaphragm pump 1 piece - Transport system with belt - Compressed air connection: 6 bar - Mobile on flanged rollers - Feed speed ~ 4 - 20 m/min - Control cabinet on the machine, traveling with it - Volts, Hz 400 / 50 - Voltage fluctuations max. +/- 5 % - Location: not in stock - Available from August 2026

Condition: excellent (used), Wittmann Temperature Controller Here we offer a Wittmann temperature controller. Wittmann Temperature Controller DISCO 2 Singulus 3X415V 50/60Hz 16A 5kW Type: TR7B7D7D0X_09_00 Condition: used Bsdpfxjzd Ruwe Amzolk Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: K974.016, Plasma spraying system - Comfort control panel - Gas regulation cabinet for plasma - Power source PPC 2002 NG - JamBox - Powder feeder PF 2/2 - Plasma torch - Plasma hose and cable set for 9MB - Sigma 67-2K water recooler with 2 cooling circuits for separate use of a 9MB and TopGun torch - Control cabinet - TS modem adapter Bedpfx Amoym Ay Eozslk

Year of construction: 2020, condition: ready for operation (used), A paper and cardboard baling press Bema is available. Motor power: 2.2kW, pressing force: 20t, opening dimensions X/Y: 596mm/1200mm, bale dimensions X/Y/Z: 1200mm/800mm/1000mm, max. bale weight: 300kg, cycle time: 40s, hydraulic oil filling: 24l, machine dimensions X/Y/Z: approx. 1800mm/1100mm/1950mm, weight: approx. 1150kg. Documentation available. An on-site inspection is possible. Bljdpozfp Hzsfx Amzok

Condition: like new (used), Year of construction: 2017, Barely used UV line for panels or flooring Bsdpev Ux R Sofx Amzelk

Condition: used, Year of construction: 2024, operating hours: 1,800 h, maximum speed: 50 km/h, front tire size: 600/70 R30 | 0%, rear tire size: 710/70 R42 | 0%, tire size: 710/70 R42, number of beds: 43, Tires (front): 600/70 R30, Tires (rear): 710/70 R42, Operating hours: 1800, Initial registration: 02/02/2024. Basic equipment/technical data: ENGINE: Max. power: 195/265 kW/hp (ISO 14396) Max. torque: 1200 Nm Maximum power with power management: 209/285 kW/hp Max. torque with power management: 1257 Nm 6 cylinders, 7.4l AGCO Power - 74 LFNT-5D, CR, 4V Emission standard (DOC+SC+SCR) without exhaust gas recirculation, Stage 5 Electronic engine control with Vistronic fan control Bljdpfx Amjzdmtvjzsk Engine speed memory Powercore engine air filter with coarse dirt pre-separation EasyCare cooler package Additional fuel pre-filter with water separator 500-liter fuel tank

Condition: used, Year of construction: 2007, Technical details: Blsdpfjzd Tcwjx Amzok turning diameter: 160 mm turning length: 300 mm control: Siemens 840D Spindle 1 Power: 22 kW Spindle 1 RPM: 5000 1/min Spindle 1 max. bar diameter: 65 Spindle 1 Torque: 150 Nm Spindle 2 power: 16,8 kW Spindle 2 RPM: 5000 1/min Spindle 2 torque: 100 Nm Travel for pick up of 2nd Spindle: W2=690 mm dimensions of the machine ca.: ´4,5x2,0x2,3 m weight of the machine ca.: 9 t Accerories Spindle 1 Collet chuck Spindle 2 Collet Chuck Chip Conveyor CNC turning center with 3 turrets and 2 spindles. There is an internal coolant system for the turrets with individual pumps *

Condition: excellent (used), Thread tap Bodpfx Asdx Ugyemzjlk Manufacturer: Reishauer Type: MF 40 x 2.5 L

Condition: excellent (used), Year of construction: 2016, operating hours: 3,500 h, Quaser MF 500 C Quaser MF 500 C machining center with Siemens 828 D control, manufactured in 2016, in very good original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. CE compliant!! Technical data: Year of manufacture: 2016 Working area and travels: Bedpfxezditys Amzolk X-axis (longitudinal): 550 mm Y-axis (transverse): 800 mm Z-axis (vertical): 610 mm A-axis (swiveling range): +30° to -120° C-axis (rotational axis): 360° (continuous) Table diameter / clamping surface: Ø 410 mm Maximum workpiece size: Ø 500 mm × H 300 mm Maximum table load: 200 kg Spindle taper: BT 40 Speed: 12,000 rpm Drive power: 15 kW Tool positions: 30 Number of simultaneous axes: 5 Rapid traverse: 36 m/min Weight: 7750 kg About the machine: Offered is a Quaser MF 500 C machining center with a Siemens 828 D control. This machining center is in very good original condition. It comes from a company where it was only used to a limited extent for prototype manufacturing. Key features: The Quaser MF 500 C is a powerful, vertical 5-axis simultaneous machining center from the Taiwanese manufacturer Quaser. It is designed for the highly precise complete machining of complex workpieces in the aerospace, mold making, and general precision engineering industries. Stable construction: The machine is built to be massive and heavy, ensuring maximum stiffness and vibration damping, even during heavy machining. Tilting table: The swiveling round table enables full 5-axis machining. With support devices (counter bearings), workpieces weighing up to 500 kg can often be clamped. The Quaser MF 500 C has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Quaser MF 500 C on site while it is powered up. You can find more milling machines from well-known manufacturers on our website.

Condition: used, Year of construction: 1967, power: 21 kW (28.55 HP), * Working width of cutting unit (cm): 175 * Weight without cabin (kg): 0 * Grain tank capacity (hl): 6.5 * Model: MF30-6 Blodpfx Aovhvf Temzok * Serial number: 0D7758 * Year of manufacture: 1967 ---- Internal vehicle number: 8144 ---- Errors and prior sale reserved. WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp Whatsapp Whatsapp

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 3141, Technical characteristics: Core Specifications Attribute Value Ultrasonic Technology High-frequency cavitation system Bedpoxx Swvofx Amzelk Tank Capacity Approx. 230 liters Cleaning Stages Multi-stage (pre-wash, ultrasonic, rinse, dry) Heating System Integrated, adjustable up to 60–80°C Ultrasonic Frequency 25 kHz Construction Material Stainless steel AISI 304 or higher Control System Programmable with safety interlocks Automation Options Basket lift, agitation, filtration, oil separation Power Supply 400V / 50Hz Noise Level Approx. 70–75 dB(A) Features & Capabilities - Multi-phase cleaning: Includes vapor pre-treatment, ultrasonic washing, cold/hot rinsing, and hot-air drying. - Oil separation system: Utilizes skimming and decanting to maintain cleaner baths. - Modular design: Configurable with additional stations for drying, corrosion protection, or deionized rinsing. - Safety & Ergonomics: Enclosed chambers with polycarbonate windows and sensor-based safety systems. - Continuous-duty rated: Designed for high-throughput industrial applications. Machine status: WORKING

Condition: ready for operation (used), Festo ELGA-TB-RF-70-800-0H+MF / 1371245 toothed belt axis, used, in good condition, 100% functional, delivery as per photos. Blsdpfjx Ernksx Amzek

Condition: ready for operation (used), SLF Fraureuth MF 170-24/19-101.1 motor spindle for internal grinding, serial number as per photo, used, normal signs of wear, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Bjdpfjxah A Rsx Amzslk

Condition: used, Year of construction: 2023, operating hours: 370 h, maximum speed: 40 km/h, front tire size: 650/60 R34 | 0%, rear tire size: 710/75 R42 | 0%, tire size: 710/75 R42, Tyres (front): 650/60 R34, Tyres (rear): 710/75 R42, Operating hours: 370, First registration: 19/12/2024_____Standard equipment/ technical dataEngineRated power (ISO): 176/240 kW/hp at 2,100 rpmMax. power (ISO): 198/270 kW/hp at 1,950 rpmEPM - Max. power (ISO): 221/300 kW/hp at 1,950 rpmMax. torque: 1,220 Nm at 1,500 rpmEPM - Max. torque: 1,300 Nm at 1,500 rpmAGCO Power, STAGE V Blodpfx Amovqakxezok