Used Demag Control Switch for sale (46,998)

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 7814-0045, total length: 4,000 mm, total width: 1,500 mm, total height: 2,000 mm, Weight approximately 3000 kg Cjdpfx Aqozqam Asterf For sale is a used machine from a site closure. Sale is made excluding any warranty for defects. The machine has not been inspected but was operational until the very end.

Year of construction: 1999, condition: ready for operation (used), Hydraulic injection moulding machine manufactured in 1999. This DEMAG Ergotech 150-610 Viva features a screw diameter of 45 mm and a maximum daylight between platens of 850 mm. It has a shot weight of 260 g and a maximum mold installation height of 250 mm. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Ergotech 150-610 Viva machine we have for sale. Contact us for further details. Cedoyxrt Tjpfx Aqterf

Condition: excellent (used), Year of construction: 2003, Demag Ergotic system Creder Avfnspfx Aqtsf Closing 35 tons Year of manufacture 2003

Condition: ready for operation (used), Year of construction: 2021, operating hours: 9,500 h, clamping force: 1,000 kN, overall weight: 5,290 kg, This 5-axis SUMITOMO SHI DEMAG IntElect2 100/470-250 was manufactured in 2021. It features a clamping force of 1000 kN and a tie bar distance of 470 mm. The machine includes an injection unit size of 250 and a screw diameter of 30 mm. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG IntElect2 100/470-250 electrical injection moulding machine we have for sale. Contact us for further details. - Tie Bar Distance: 470 mm- Mould Height Min.: 180 mm- Mould Height Max.: 550 mm- Centering Diameter (Fixed Platen): 125 mm- Centering Diameter (Moving Platen): 125 mm- Ejector Stroke: 150 mm- Ejector Force: 32 kN- Ejector Speed: 333 mm/s- Injection Unit Size: 250- Screw Diameter: 30 mm- L/D Ratio: 20- Injection Speed: 350 mm/s- Control Unit: SDIAS- Mains Connection / Voltage: 400 V / 50 Hz- Current / Amperage: 70 A- Short Circuit Capacity (Icw): 2.0 kA- Max. Hydraulic Pressure (Pmax): 210 bar- Total Weight: 5290 kg- Robot System Model: SDR 5S H&P- Robot Load Capacity: 3 kg- Robot X-Stroke (Transverse Stroke): 1000 mm (Non-operator side)- Robot Y-Stroke (Demoulding Stroke): 400 mm- Robot Z-Stroke (Vertical Stroke): 1000 mm- Additional / Peripheral Equipment:- Material Hopper Loader / Conveyor: KOCH TECHNIK- Temperature Control Unit: HB-THERM Thermo-5 Cedpfxezp Ew Dj Aqtorf

Condition: refurbished (used), functionality: fully functional, input voltage: 400 V, input current: 370 A, type of input current: AC, input frequency: 50 Hz, protection type (IP code): IP20, year of last overhaul: 2026, continuous power: 200 kW (271.92 HP), Equipment: type plate available, Exact model designation: Control Techniques Unidrive M000-104 03200 EU0 Output power and output current: 200kW | 361A ° Includes inspection seal! ° Easy operation via integrated control panel ° Quick parameterization possible ° Original operating manual for commissioning included Credozrc Dyopfx Aqtef Only 1 unit left in stock! This item has been reset to factory settings and is therefore in its original condition as delivered by the manufacturer. Please refer to the original product images for the item's visual condition. Fully functional and ready for immediate use.

Condition: used, total height: 1,200 mm, total length: 16,640 mm, total width: 3,510 mm, Colour: Yellow Empty weight: 3.000 kg Price: On request Cjdezn H N Sjpfx Aqterf - Documentation available: No - CE certificate present: No - Serial number: 13/6 KF2 - Lifting capacity [kg]: 3000 - Span [mm]: 16600 - Girder: Single - Crane control: Fixed cable - Dismantled: Yes - Transport dimensions: 16640mm x 3515mm x 1200mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2010, Column jib crane, overhead crane, workstation crane -Manufacturer: Demag, Column jib crane type D-MS360, lifting capacity 3200 kg -Base plate: Ø 810 mm -Load capacity: 3200 kg -Chain hoist: Demag type 2M EKDR 3, year of manufacture 2010 -2x lifting speed: 6.0/1.0 m/min -Drive system: yes -Swivel drive: yes -Projection: 4480 mm -Total height: 5060 mm -Hook height: 5040 mm -Swivel range: 360° -Transport dimensions: 1200/5500/H2260 mm -Empty weight: 1850 kg Credpfx Aqjzpaq Estef

Condition: used, Year of construction: 2019, Injection molding machine, Demag El Exis 1000/1195-6300, manufactured in 2019. Cedpfx Aqjzp D Ststsrf

Condition: good (used), functionality: fully functional, Year of construction: 1990, PARIS area, August 2026 1 ADC 5T hoist, ADC, height 4360mm, span 15700mm, 5000kg 2 Europont 1T hoist, Verlinde, wired control, Verlinde, height 4360mm, span 15700mm, 1000kg 3 Europont 1T hoist, Verlinde VL10, Verlinde, height 4360mm, span 15700mm, 1000kg 4 DEMAG 1T, beam 10,800 mm, tracks 30m, Verlinde VX10 1008 B2 2022, span 10800mm, 1000kg 5 DEMAG 1T, beam 10,800 mm, tracks 30m, Verline VL10 1004 b2 2006, span 10800mm, 1000kg 6 DEMAG 1T, beam 10,800 mm, tracks 30m, Verlinde, height 3000mm, span 10800mm, 1000kg 7 DEMAG 1T, beam 10,800 mm, tracks 30m, Verlinde, height 3000mm, span 10800mm, 1000kg 8 Europont 1T hoist, Verlinde, wired control, Verlinde, height 3000mm, span 7800mm, 1000kg To be dismantled and removed in August, Paris. Price negotiable for the entire lot. Test video available for each bridge/crane. Credpfxszndcpe Aqtsf PRICE: 1000 EUR for one 1-ton bridge/crane.

Condition: used, Single-girder bridge crane with hoist, DEMAG - KONECRANES, type CTX40410050P35FBL05 Crane bridge, manufacturer's number 281322/5, year of manufacture 2004 Load capacity: 5 tons Span, track gauge (center of wheel to center of wheel): 4650 mm Wheel diameter: approx. 140 mm Wheel flange width: 60 mm for track width 50 mm T-beam profile: height 320 x width 300 mm End beam length: 2425 mm (+ buffer pads, 60 mm each) Hoist, DEMAG - KONECRANES, type ZXT40410050P35FBL0F Hoist, manufacturer's number H0427815, year of manufacture 2004 Load capacity: 5 tons Rope arrangement: 4/1 Rope diameter: 8 mm Hook travel: 6 meters Main hoisting speed: 5.0 m/min Fine hoisting speed: 0.83 m/min Classification group: M5 Crsdpfxozd Urtj Aqtof Overall height from top of T-beam to bottom of crane hook: approx. 1100 mm Trolley travel speed: 0 to 20 m/min Crane travel speed: 0 to 30 m/min Power supply: 400 volts, 50 Hz - Control box suspended on cable, freely movable - Control cabinet on the crane bridge - Trolley travel with electric limit switches - Crane travel with electric limit switches Space required for transport (crane bridge only): L x W x H: 4830 x 2540 x 1200 mm Weight of crane bridge: approx. 1.6 tons The crane bridge is in very good condition, like new.

Condition: excellent (used), Crane control, controller, safety control, safety switch, safety sensor, safety relay, control unit, overload trip power sensor, auxiliary switch block, auxiliary switch, contactor, solid-state contactor, contactor, power contactor, capacitor contactor, contactor, contactor, circuit breaker, motor contactor -Manufacturer: DEMAG, Schütz reversing Schütz, unused, original packaging Csdszmupwjpfx Aqterf -Type: DSW 3TF 8133 -Item No.: 87535044 -Cardboard dimensions: 165/105/H75 mm -Weight: 0.5 kg

Condition: excellent (used), Crane control unit, controller, safety control unit, safety switch, safety sensor, control unit, overload release power sensor, gear limit switch, contact evaluator, frequency evaluator -Manufacturer: DEMAG, crane control contact evaluator, original packaging Credpfozmrinox Aqtef -Type: Dematik MKA-2 -Item No.: 46953144 -Cardboard dimensions: 175/115/H60 mm -Weight: 0.4 kg

Condition: excellent (used), Crane control system, controller, safety control system, safety switch, safety sensor, safety relay, control unit, overload trip power sensor, gear limit switch, contact evaluator, frequency evaluator -Manufacturer: DEMAG, crane control contact evaluator, original packaging -Type: Dematik MKA-2 -Item No.: 46967044 Credpfx Aqozmribstof -Cardboard dimensions: 175/115/H60 mm -Weight: 0.3 kg

Condition: used, Column-slewing crane DEMAG, type KBK 1 Identification No. Boom: 98005044 Identification No. Crane column: 85102644 Year of manufacture: 2007 Load capacity: 80 kg Slewing range: 270° Outreach: 5000 mm Overall height: 4030 mm Codeznn H Sjpfx Aqtjrf Height to the underside of the boom: 3500 mm - Boom profile: DEMAG C-profile rail KBK 1 - Boom with adjustable slewing limit - Trolley for DEMAG C-profile rail KBK 1 - Base plate of crane column: L x W x H = 450 x 450 x 25 mm (4 holes, Ø approx. 27 mm) Self-weight: 300 kg Very good condition

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, load capacity: 1,000 kg, lifting height: 5,000 mm, Electric chain hoist DEMAG DKUN10-1000 K V1 Load capacity 1000 kg, 2/1 Hook travel 5 m Year of manufacture 2006 Without control unit, otherwise complete Very good condition Various electric chain hoists in stock Crsdpfx Aqev Uvn Iotsf Good condition Info: 20,000 DEMAG spare parts and components in stock! Demag parts warehouse

Condition: excellent (used), Year of construction: 2008, Injection Moulding Machine DEMAG System 800/1120-9500 Basic Information Manufacturer: DEMAG Model: System 800/1120-9500 Year of manufacture: 2008 Clamping Unit Clamping force: 8,000 kN Platen dimensions (horizontal × vertical): 1620 × 1500 mm Tie bar spacing (horizontal × vertical): 1120 × 1000 mm Minimum mould height: 500 mm Maximum mould height: 1050 mm Maximum distance between platens: 2080 mm Opening stroke: 1030 mm Ejector stroke: 350 mm Ejector force: 139 kN Maximum mould weight: 7,200 kg Injection Unit Screw diameter: 130 mm Injection volume: 7,300 cm³ Shot weight (PS): 6,640 g Maximum injection pressure: 1,300 bar Screw length: 20 L/D Electrical & Hydraulic Equipment Rated pump motor power: 110 kW Heater power: 79 kW Hydraulic oil tank capacity: 1,300 l Machine Dimensions and Weight Csdpfx Ajyugctoqtorf Machine dimensions (L × W × H): 12.3 × 2.7 × 2.7 m Machine weight: 33,500 kg Control cabinet weight: 9,700 kg Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with the modern ESS servo drive system, which increases the energy efficiency of hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor via a frequency inverter, adjusting the motor’s rotational speed to the current demand during the production cycle. As a result, electrical energy is consumed only during the actual machine demand. Key Advantages - Up to 30% reduction in electricity consumption - Servo drive technology for the hydraulic pump - World-class and proven technology used in the plastics processing industry - Reduction of energy losses during idle operation - Lower heating of the hydraulic system - Longer service life of hydraulic components - Possibility of installation on existing hydraulic injection moulding machines The ESS system enables a significant reduction in machine operating costs while maintaining full production parameters.

Condition: excellent (used), Year of construction: 2008, DEMAG Injection Moulding Machine System 1500/1500-16000 Basic Data Manufacturer: DEMAG Model: System 1500/1500-16000 Year of manufacture: 2008 Clamping Unit Clamping force: 15,000 kN Dimensions of mounting plates (H × V): 2150 × 1880 mm Clearance between tie bars (H × V): 1500 × 1250 mm Minimum mould height: 700 mm Maximum mould height: 1400 mm Maximum opening stroke: 2900 mm Injection Unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Injection weight (PS): 9,880 g Maximum injection pressure: 1454 bar Electrical and Hydraulic Equipment Rated pump motor power: 165 kW Heater power: 97 kW Machine Dimensions and Weight Net machine weight: 74 t Control cabinet weight: 21 t Total weight: approx. 95 t Dimensions (L × W × H): 14.4 × 3.4 × 2.9 m Service History / Repairs 2010 – new screw with RSP and barrel 2015 – new IBED 2015 – new wiring board 2017 – new motor and pump no. 2 2017 – new injection cylinder rod BS with seals 2017 – replacement of oil cooler circulation pump 2017 – replacement of TeachBox (robot) 2018 – replacement of pumps P1 + P3 (at 65,800 h) 2018 – hydraulic oil change Optional ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which significantly improves energy efficiency in hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor through a frequency inverter, which adjusts the motor speed to the machine’s actual demand during the production cycle. As a result, electricity is consumed only when it is truly needed. Main Benefits - Up to 30% reduction in energy consumption - Servo drive technology for hydraulic pumps - Global quality and proven technology used in the plastics processing industry Cjdeyugalepfx Aqtsrf - Reduced energy loss during machine idle time - Lower heating of the hydraulic system - Extended service life for the motor and hydraulic components - Option for installation in existing hydraulic injection moulding machines The ESS system allows significant reduction of machine operating costs while maintaining full production performance parameters.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, DEMAG System 1500/1500-16000 Injection Moulding Machine Year of manufacture: 2008 We offer for sale a high-quality injection moulding machine from the German brand Demag, model System 1500/1500-16000, equipped with a robot and additional equipment. The machine is in very good technical condition, regularly serviced, complete, and ready for operation. TECHNICAL DATA Clamping unit: Csdpfjww Idlex Aqtsrf Clamping force: 15,000 kN Mounting platen dimensions (W x H): 2,150 x 1,880 mm Clearance between tie-bars (W x H): 1,500 x 1,250 mm Minimum / maximum mould height: 700 – 1,400 mm Maximum opening stroke: 2,900 mm Injection unit: Screw diameter: 145 mm Injection volume: 10,981 cm³ Shot weight (for PS): 9,880 g Injection pressure: 1,454 bar Electrical-hydraulic system: Hydraulic motor power: 165 kW Heater power: 97 kW Dimensions and weight: Machine weight with control cabinet: 74,000 kg / 21,000 kg Overall dimensions (L x W x H): 14.4 m x 3.4 m x 2.9 m Additional equipment: Wittmann W 753 robot – year of manufacture: 2008 Safety enclosure Conveyor belt (product conveying) The machine is ideal for processing large technical mouldings. Perfect for serial production, with the possibility of full automation thanks to the installed robot and part removal system.

Condition: used, Column-slewing crane DEMAG Type KBK 1 Year of manufacture: approx. 1980 Load capacity: 250 kg Slewing range: 270° Outreach: 2000 mm Overall height: 2300 mm Height to the underside of the boom: 1800 mm - Boom profile: DEMAG C-profile rail KBK 1 - Trolley for DEMAG C-profile rail KBK 1 - Base plate for crane column: L x W x H = 370 x 370 x 20 mm (4 holes, approx. Ø 27 mm) Weight: 145 kg Crsdpfxovp Ryhs Aqtjf

Condition: reconditioned (used), Year of construction: 2004, Brand: DEMAG Type: DH1063 H24 4/1 FG10 Year of construction: 2004 Credpfxsgiyf As Aqtjf Load-capacity appr.: 25.000 kg Hook-Path appr.: 12.000 mm Load-classification: FEM/ISO 1Bm/M3 Working-speeds: Hoist appr. 6,3/0,6 m/min Certification of the remaining useful life of appr. 80% by an inspection expert. Equipped with: - Rope - Fine stroke FG10

Condition: reconditioned (used), Year of construction: 2000, Manufacturer: Demag Type: DH520 H20 4/1 F10 Year of manufacture: 2000 Cedekqm Aispfx Aqtorf lifting capacity appr.: 8.000 kg hook path appr.: 10,000 mm trolley track appr.: 1,400 mm Reeving: 4/1 Thruster group: FEM/ISO 2m/M5 Working speeds: hoist appr. 0.8/8.0 m/min trolley appr. 5.0/20.0 m/min Certification of the remaining service life of appr. 80% by an inspection expert Equipped with: - Mechanical fine lift F10 - Rope and bottom block 4/1 - trolley

Year of construction: 2016, condition: excellent (used), Span current/extendable approx. 8,0/12,0 m Lifting height current/extendable approx. 10,0/changeable m Make/Reconstruction DEMAG/TEICHMANN Year of construction/Operating time only approx. 2016/2 Jahre Stress group H2 B3 Crane equipped with: Crsdpfx Aqoqcu T Uotef - DEMAG monorail trolley, short design in M5 - Radio remote control - Trolleys optionally available with wheel flange guide on flat iron rail or barrier free steel plate slat

Condition: used, Year of construction: 2009, Due to a relocation of our production facilities abroad, we now have two injection molding machines of the EL Exis / Sumitomo Demag brand available. These are the EL Exis S 200 - 840 and 300 - 1450 models, manufactured in 2009, which we would like to offer you on a non-binding basis. Cjdpfxeznwahe Aqtjrf The machines have been operated in our facility on a two-shift system. Only clear, glass-like PP random copolymer was processed. In addition to the injection molding machines, the side-entry robots from Wittmann are also included in the scope of supply.

Condition: used, machine/vehicle number: SMD10112, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, table length: 500 mm, table height: 1,060 mm, XYZ 1000LR VMC Siemens 828D Control Siemens 828D CNC Control X Axis Travel 1000mm Y Axis Travel 500mm Z Axis Travel 500mm Table Size 1060 x 500 Spindle to Centre Column 110 – 610mm XYZ Rapid Feedrates 20m/min Max. Table Load 800kg Spindle Speeds 8000rpm Spindle Motor 15kW Spindle Taper BT40 Crodpfxszkrrks Aqtjf 20 Station Carousel ATC Footprint 2865 x 2390 x 2680mm Machine supplied with: Rebihsaw Tool Prove Swarf Conveyor Tooling As Phootgrpahed Swarf Bin For Sale With Jet Machinery Ltd Jet Machinery Stock Number:79247 Machine Serial Number: SMD10112 £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, total height: 1,000 mm, total length: 11,500 mm, total width: 2,450 mm, - Documentation available: No - CE certificate present: No - Lifting capacity [kg]: 5000 - Lifting height [mm]: 5500 - Span [mm]: 11300 - Girder: Single - Crane control: Fixed cable - Dismantled: Yes - Transport dimensions: 11500mm x 2450mm x 1000mm (l x w x h) - Transport packages [pcs.]: 1 Crsdpfx Ajzmd T Ejqtof Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum