Used Dox Pile Turner for sale (599)

Condition: good (used), Year of construction: 2016, functionality: fully functional, Model: GL 840 PH H-UV Year: 2016 Impressions: 218 million PQC-S OFF-PRESS CONTROLS (with USB/CF media input) – including overhead amp HIGH SPEED START-UP SMART SEQUENCE SELF DIAGNOSIS II KHS-AI - Pre-linking & removal - Self-learning function - Production management system (diagnostics, maintenance) - Register preset SMART FEEDBACK SIMULTANEOUS PRESETTING OF FRONT/BACK INK KEYS (all units) AIR PRESET FULLY AUTOMATIC PLATE CHANGING – BENDERLESS TRANSFER CYLINDER COCKING REMOTE CONTROL PAPER THICKNESS PRESETS PAPER SIZE PRESET PACKAGE • Sucker head preset • Slow-down wheel preset • Side lay guide • Delivery side jogger • Sheet release cam remote control FEEDER SIDE BLOWER PRESET Lrodjy Rmdwepfx Aa Ror FEEDER PILE SIDEWAYS CONTROL WITH PIT-LESS SKID LOADER SUCKER HEIGHT REMOTE CONTROL SUCTION TAPE FEEDER (Additional rubber wheels and belts on feeder board) ANTI-STATIC AT FEEDER SUCTION SIDELAY GUIDE FEEDBOARD VENTURI GUIDE ULTRASONIC DOUBLE SHEET DETECTOR REGISTER DETECTION (2-STEP DETECTION) ‘A’ TRANSFER CYLINDER GRIPPER PAD HEIGHT ADJUSTMENT ‘A’ (INFEED) CYLINDER COCKING REMOTE CONTROL ‘A’ (INFEED) CYLINDER ANTI-FANOUT REMOTE CONTROL ANTI-RUST TREATMENT FOR PLATE CYLINDERS ANTI-RUST TREATMENT FOR BLANKET CYLINDERS ANTI-RUST TREATMENT FOR IMPRESSION CYLINDERS ONE-TOUCH BLANKET CLAMP FOR BARRED BLANKET SHEET GUIDE OVER IMPRESSION CYLINDER AIR BLOWER ABOVE IMPRESSION CYLINDER SOLID TRANSFER CYLINDERS + GRIPPER PAD UP/DOWN (one-side adjustment) FULLY AUTOMATIC DOUBLE SIZE 3-CYLINDER PERFECTING UNIT IMPRESSION CYLINDERS WITH STAINLESS STEEL JACKET – after perfecting unit H-UV PROOF OIL SEALS INK DUCTOR INTERVAL ADJUSTMENT MOTORIZED INK FOUNTAIN ROLLER INK ROLLER NIP FOLLOWING INK ROLLER TEMPERATURE CONTROL (oscillation) INK OSCILLATION TIMING REMOTE CONTROL INKER FAN (feeder side on unit) INKER/DAMPENER DE-CLUTCH – all units INK MIST EXTRACTOR FANS (GL40) – New type KOMORIMATIC DAMPENING SYSTEM DAMPENING FORM ROLLER SPEED REDUCTION (Delta Effect) OSCILLATING RIDER ROLLER ON DAMPENING FORM ROLLER BRIDGE ROLLER RIDER ROLLER UNDER DAMPENING FORM ROLLER SKEWING DEVICE ON KOMORIMATIC WATER LEVEL SENSOR AUTOMATIC BLANKET CLEANER (H-UV/pre-pack) AUTOMATIC IMPRESSION CYLINDER CLEANING (H-UV/pre-pack) INK WASHING TRAY PNEUMATIC ON/OFF AUTOMATIC INK ROLLER CLEANING – twin nozzles SHEET DECURLER AIR BLOWER ABOVE DELIVERY PILE ANTI-STATIC BAR AT DELIVERY DELIVERY SHEET ANTI-DEVIATION DEVICE AUTOMATIC LUBRICATION ON DELIVERY CHAIN GUIDE DELIVERY AREA SENSOR DELIVERY PILE EXTRACTION – DRIVE SIDE FIXED ROLLERS – A, B & C INTERCOM H-UV DRYER PREPARATION Technotrans Beta.c 280G Alcosmart, digidos.p 150C, FZT 120P. Conductivity display for Beta.c pH value display for Beta.c • PDC-SX (Print Density Control – Spectrophotometer and Automatic Register Control) • KID (Komori Info-Service Display) • Baldwin Ozone-Free Metal Halide H-UV System, including: - 1x H-UV LED – end of press - 1x H-UV LED – before perfecting unit • Technotrans Beta.c 280G • Technotrans external cooling system (installation excluded) • A-APC – Asynchronous Automatic Plate Changing • A-APC / Automatic Blanket Cleaner Parallel Control for GL-40 • K-PressNavi • DC Blowers • Special Ink Misting Cover on All Units

Condition: new, Year of construction: 2026, functionality: fully functional, ## Description The KMK ZLFM-800SC is a fully automatic film laminating machine with integrated dust removal, designed for high-quality printed materials and packaging. It combines a high-performance feeder, a precise laminating unit, and an automatic cutting and stacking system into a compact production line. Thanks to the integrated dust removal system, optimal adhesion of the film to the printed sheet is achieved. The machine is ideal for printing companies and packaging manufacturers who expect the highest quality, high production speeds, and a fully automated workflow. ### Highlights * Fully automatic production process * Integrated electric dust removal * Precise film lamination with heated rollers * Automatic high-pile feeder with non-stop paper feed * Automatic cutting and separating unit * Automatic stacker with continuous sheet discharge * Fast changeover and easy operation * Touchscreen control * Robust machine construction for continuous industrial operation ### Application Areas The machine is ideally suited for: Ledjzg E I Rjpfx Aa Rorr * Folding cartons * Cardboard packaging * Book covers * Brochures * Business cards * Posters * Premium printed products * Food packaging * Cosmetic packaging * Pharmaceutical packaging ### Technical Data * Format range: 260 × 250 mm to 780 × 1040 mm * Model year: 2024 * High-pile feeder with non-stop feed * Electric dust removal * Main printing roller Ø 380 mm * Rubber roller Ø 305 mm * Heated oil temperature system for optimal lamination quality * Automatic cutting unit * Cutting speed up to 70 m/min * Pneumatic separating system * Automatic sheet delivery system with stacking system ### Standard Equipment * Automatic high-pile feeder * Electric dust removal * Heated laminating unit * Automatic cutting unit * Automatic stacker * Touchscreen control * Non-stop paper feed ### Included in the Scope of Delivery ✅ New machine directly from the manufacturer ✅ 2-year warranty ✅ Professional installation and complete assembly by experienced KMK technicians ✅ Machine commissioning on-site ✅ Free training and instruction for your operating personnel ✅ Comprehensive after-sales service and technical support, even after installation ### Delivery Time Approximately 6-8 weeks after order receipt ### Machine Type Fully automatic film laminating machine with integrated dust removal KMK ZLFM-800SC

Condition: good (used), Year of construction: 1998, functionality: fully functional, Manufacturer: Heidelberg Model: Speedmaster 102-8-P Year of manufacture: 1998 Prints: 359 million Equipment: - CP Tronic control console - CPC 1-04 color control system - Alcolor dampening system - Autoplate plate changing system Additional features: - Automatic blanket washing system - Autoregister - Electronic double sheet detection - Electronic side guide control - High-pile delivery Lrodpozd R Hgofx Aa Rsr - Sheet de-curler - Anti-static system - Steel sheets in the feeder and delivery - Super Blue configuration - Technotrans cooling and circulation system - Weko powder spraying device Maximum format: 720 × 1,020 mm Machine type: Sheetfed offset printing press Machine model: 8-color perfecting press

Condition: used, Year of construction: 1991, offer consists of: Horizon AC-8000 S air- suction collator with 8 bins - Format: max: 318x470mm, min: 148x210mm - missfeeding-, doublefeeding and jamming control - integrated jugger - bin pile height: 10cm - paper weight: 23-210g/qm - pile height: 10cm/bin - capacity: up to 2400 cycles/hour - dimension: 165x65x207cm - weight: 510kg Lsdpozhlrlsfx Aa Rerr - power: 3-phase 400 Volt We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, functionality: fully functional, Year of construction: 1995, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Tauring, controller model: CNC3A, number of rollers: 8, pipe diameter (max.): 60 mm, power: 6 kW (8.16 HP), input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, foot remote control, hardened rollers, Tube & profiles bending machine ,Tauring Slalom 60-3A 8 rollers for left and right hand bending sense Operation in manual and automatic programmable axis with digital screen readout One-pass bending programmable in different planes manipulator programmable “tube turner” 12 mtrs length tube feeder Lrjdpfjzi Ew Rsx Aa Ror Complete with several set of rolls for tube from 14 to 60 mm - 8 pcs each set = total 140 rolls. Power rotation 3 kw voltage Vac 400/50 power hydraulic bending 2,2 Kw

Condition: excellent (used), Year of construction: 2011, Ref: 11100 . 2011 Duplo DPB-500 EVA Perfect Binder Excellent condition! Only 40,000 books on the counter! Ledpfx Aoy Nzclea Rorr Single clamp solo binder designed for the digital book-on-demand market with operation by one person. Features: • EVA spine glue unit • Programmable pre-melter • Computerised set-up with icon based touch-screen • Automatic setting of clamp book thickness and cover scoring • Double/Out of cover detector • Light beam score positioning • Milling & roughing unit with dust bag extraction • Internal vertical stacking tray delivery Specification: Book thickness: Min 1mm / Max 51mm + cover thickness Book size (spine × fore-edge): Max 360mm × 320mm Min 120 × 120mm Cover size: Max 360 × 696mm / Min 120 × 250mm Cover weight: 80-302gsm Cover Pile height: 70mm Mechanical speed: Max: 525 /hour

Year of construction: 2026, condition: used, functionality: fully functional, Complete brewery equipment, can and bottle filling machine, pasteurizer, manual depalletizer, can rinser and turner. The equipment is located in the Faroe Islands. Lrsdjy Atr Sjpfx Aa Rsr

Year of construction: 2004, condition: used, machine/vehicle number: 1224400758 , Palletfeeder PD 78 Ljdpfxek Izqze Aa Rerr Tremat Flat Pile Feeder 4 Buckles (manual) 3 Folding Knives Up to 32 pages folding

Year of construction: 2009, condition: excellent (used), functionality: fully functional, Foliant Gemini 400G Automatic Laminator Fully Automatic Digital Print Laminating Machine. Deep Pile Auto Feeder - 300mm Paper stack capacity Max sheet size B3 (380mm wide) Max production speed 15 m/min ( 1,800 x SRA3 sheets per hour) Ljdpfx Aaovrd E Ao Rerr Built-in compressor for high-pressure laminating rollers. Auto-control for miss-sheet detection and quality control. Large roll film capacity. (up to 3,000 m) In-line sheet separation. Delivery into a paper jogger 220/240 volt - 50Hz

Condition: used, Year of construction: 1988, The Stahl T49/4.KB-F.2, manufactured in 1988, is a machine equipped with four pockets and a flat stack feeder. It features a single cross-cutting unit, enhancing its functionality. This model has a format of 490 mm and is currently located in Germany, available in the Printshop. Ljdpfx Aaev Di Sxs Rerr Format: 490 mm Equipment: 4 buckle plates 1 Knife vertical pile feeder

Condition: new, No. 3187 Vacuum dryer / drying chamber ISVE ES 5 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1600 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Timber pile length: 5000 mm Timber pile width: 1100 mm Timber pile height: 990 mm Net wood volume: approx. 5 m3 Installed electrical power: 16,01 kW Average hourly power input: 8 kW/h Includes: - 12 electric heating plates (each 1100 x 5000 x 10 mm LWH / 57 kg / 1,25 kW) - 2 internal condensers (turbofan of 0,55 kW each 380 VCa with stainless steel pipes) - 1 one-way valve (clapet: one ¾” for vacuum circuit) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 5900 x 1620 x 2300 mm LWH Weight approx. 2900 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Lrjdpevc Axpefx Aa Rsr Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Year of construction: 2017, condition: used, Case maker Kolbus DA 270 Bookjet Edition Year: 2017 Equipped with: - Copilot system with touchscreen - Board magazine for manual loading - Cloth feeder for non-stop operation with pile magazine, max. stacking height 160 mm - Miss cloth control during the separation process - Counter stacker delivery with following roller conveyor - Moveable gluing station for processing hot-glue with glue preparation unit in the premelter, heated glue application roller and scraper roller - Cloth cylinder with grippers and exchangeable plates for rubber pad (incl. 5 x 500 mm, 5 x 720 mm and 10 x rubber pad) - Viscosity control device for automatic water supply to ensure constant glue viscosity with pump and water tank for manual filling - Device for inside lining with hot-glue - Pressing roller device for crease-free connection of the cover material with boards and spine strip - Device for producing padded cases - Automatic case counter - Programmable automatic settings, motorized adjustments, indication of production faults - Single case request for control purposes done from the operating side - Servo-controlled drive technology based on Siemens SIMOTION D Special equipment: - without centre strip roll device (optional available new!) - With board centre strip magazine, boards height min. 130 mm - Board centre strip cutting device (cross centre strip) for processing digital print products of varying centre-strip, device for cutting rigid centre board strips to width, with possible width variation from cycle to cycle - Kolbus Turning Device WE 260, year 2017 (counter: only approx. 4,7 mio. book cases) Technical specifications: - Mechanical speed: up to 65 cycles/min - Open cover size max.: 670 x 390 mm - Open cover size min.: 205 x 140 mm - Joint width: 4 - 15 mm - Spine width: 14 - 120 mm - Turn in width closed: 8 - 15 mm - Cloth width: 223 - 708 mm Ljdpozhwu Eofx Aa Rjrr - Cloth height: 130 - 428 mm - Board thickness: 1 - 4 mm - Board width: 95 - 328 mm - Board height: 140 - 390 mm - Board centre strip thickness: 1 - 4 mm - Board centre strip width: 6 - 90 mm

Condition: new, Year of construction: 2020, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 52AMG162, compressed air connection: 6 bar, working width: 560 mm, warranty duration: 12 months, operating speed: 400 mm/s, Komfi Laminator Amiga 52I (Intelligent In-Line Feeding) New, Manufactured 2020 Specifications: Max. speed of lamination: 25 m/min Max. output: 8000 sheets/h Min. sheet dimensions: 200 × 250 mm Max. sheet dimensions: 560 × 800 mm (or up to 1016 mm) Paper weight: 115-600 g/m² Paper thickness: Max 0.7 mm (with overlap > 0) / Max 1.4 mm (with overlap < 0) Max. paper pile: 6 cm (depending on sheet length) Thickness of laminating film: 24-50 μm; OPP, PET, Nylon Sheet overlap accuracy: ± 1 mm Feeder: Intelligent In-Line Feeding (connection with the PRinter) Laminating Unit: Adjustable distance stoppers for lamination unit to enable processing thick substrates and windows lamination. ”On-the-fly” side-adjustable unwinding shaft with adjustable brake force. Lrodpfx Aezb Db Hea Rjr Height-adjustable and removable spread roller perfectly removes wrinkles from laminate. IR heating for laminating cylinder. Temperature sensor inside the cylinder for precise regulation. Rubber coated pressure roller. The powerful pneumatic pressure system guarantees even nip pressure and perfect lamination results. Separator & Delivery: Decurling unit consisting of bar and roller with position control to move the snapping moment automatically when the position of decurler is changed. Built-in film perforator to enable sheet separation. Cam-driven separation roller with adjustable tearing action, delivery roller and sheet skewing wheel. Fixed delivery desk with adjustable air nozzles.

Condition: new, Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 36AMG, compressed air connection: 6 bar, working width: 360 mm, warranty duration: 12 months, operating speed: 250 mm/s, Komfi Laminator Amiga 36B (Bottom Suction Feeder) New, Manufactured 2024 Specifications: Max. speed of lamination 15 m/min Min. sheet dimensions 20 × 20 cm Max. sheet dimensions 36 × 70 cm Paper weight/Paper thickness 115-350 g/m² / max 0.5 mm (with overlap > 0) / max 1 mm (with overlap < 0) Max. paper pile 6 cm (depending on sheetlenght) Thickness of laminating film 24-50 μm Kind of laminating film OPP, PET, Nylon, PVC Time of laminating roll warm up Approx 3.5 min Sheet overlap accuracy ±1 mm Lredozh N Dljpfx Aa Ror Machine dimensions incl. table 230 × 79 × 152 cm Air supply requirements Min. 6 bar Consumption of compressed air 20 l/min Max. consumption of compressed air 30 l/min Max. pressing force 12.8 kN = 1.3 ton-force Max. linear nip pressure 35,5 N/mm Max. consumption of electricity 6 kW Power supply 6 kVA Machine weight 332 kg Recommended machine capacity 100 000 sheets/month Feeder: Bottom Suction Vacuum Feeder Laminating Unit: ”On-the-fly” side-adjustable unwinding shaft with adjustable brake force. Height-adjustable and removable spread roller perfectly removes wrinkles from laminate. IR heating for laminating cylinder. Temperature sensor inside the cylinder for precise regulation. Rubber coated pressure roller. Adjustable distance stoppers for lamination unit to enable processing thick substrates and windows lamination. The powerful pneumatic pressure system guarantees even nip pressure and perfect lamination results. Separator & Delivery: Decurling unit consisting of bar and roller elements to reach flat result also for difficult thin or duplex sheets. Built-in film perforator to enable sheet separation. Cam-driven separation roller with adjustable tearing action, delivery roller and sheet skewing wheel. Fixed delivery desk.

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 110SIS, compressed air connection: 6 bar, working width: 1,100 mm, warranty duration: 12 months, operating speed: 1,000 mm/s, Komfi Laminator Sirius 110 with HotKnife, Rotary Knife and Automatic Stacker New, Manufactured 2025 Ideal for commercial printing and packaging industry! Max. production speed: 60 m/min (5091 B1 sheets landscape/h); 50 m/min with hot knife (4243 B1 sheets landscape/h) Max sheet size: 1100 x 1100 mm Paper weight: 115-600 g/m² Dimensions (incl. automatic stacker): 7.08 x 2.71 m Min. sheet dimensions: 300 x 297 mm Max. paper pile: 1350 mm including pallet Thickness of laminating film: 24-50 μm Kind of laminating film: OPP, PET, Nylon Time of laminating roll warm up: 5 min Sheet overlap accuracy: 1.5 mm Consumption of compressed air: max 80 l/min Max. pressing force: 43 kN Max. linear nip pressure: 39 N/mm Double capacity for sheets in the high-pile feeder and for laminating film = reduced machine downtimes, increased machine efficiency. Square shaped feeder for B1 sized sheets to increase the machine productivity. Lredpfx Aozia S Nsa Rsr Easy pallet placement. Energy saving zone heating system with fastest heat up time. Feeder: 2-way accessible high pile pallet feeder with Komfi double action feeding head. Precise and constant sheet overlap achieved thanks to the sheet registration system using a mis-feed sensor, front lays, accelerating in-feed pulleys and guiding plates to prevent thin paper from wrinkling. Laser guided pallet driving system with quick adjustable lateral stops and air nozzles. Combined air / vacuum compressor. Adjustable separation blowers for reliable separation of sheets from the pile and trouble-free loading of long sheets. Laminating Unit: High-polished chrome laminating roll, with deep drilled sensors located close to the film surface. Dry, low inertia multi zone heating system using resistance heater, temperature detection by deep drilled sensor with the touch-less signal convertor. Laminating rolls are belt driven to achieve outstanding sheet surface quality for special metallic and holographic films. Pneumatic nip pressure applied by durable polyurethane coated pressure roll, with nip stoppers for thick sheets and windows lamination. „On-the-fly” side adjustable air expansion unwind shaft, with automatic film tensioning and capacity detection. Height adjustable film spread roll to smooth wrinkles on film. Zone heating of the laminating roller keeps roll temperature even and saves energy when laminating small formats. Separator & Delivery: Pneumatic pull roll with adjustable nip force to create tension for sheet decurling. Dual roll/bar decurling adjustable unit with position detection to have sheet registered for its separation. Decurling unit consisting of bar and roller with position control to move the snapping moment automatically when the position of decurler is changed. Built-in film perforator to enable sheet separation. Cam-driven separation roller with adjustable tearing action, delivery roller and sheet skewing wheel. Automatic stacker. Options: Film slitter to cut film to the requested width. Additional On roll perforator. Effect foiling device (OTF). Pallet fine positioning tool. Hot knife with variable rotation speeds for perfect separation of thick, PET and Nylon films that eliminates flagging. Antistatic bar removes static charge from the separator to avoid thin sheets wrapping onto the rollers. Air ionizer (behind the snapping roll) – helps smooth unloading of sheets on the unloading table without static charge. Windows lamination kit. Strip lamination kit.

Condition: good (used), Year of construction: 1995, SERIAL NUMBER: 6572818 Ljdpfx Aajy T Ig Ej Rjrr PAPIER STAPELLIFT

Condition: good (used), Year of construction: 2010, functionality: fully functional, OMET FlexyServo 330 mm Year of manufacture: 2010 Printing process: Servo-driven UV flexo Condition: Used – excellent condition Location: Europe _____ Machine Configuration • 6 x UV flexo printing units • 6 x GEW UV drying units • Double die-cutting stations • 1 x Gap Master system • Turn bar (web turner) Lodpfx Ajyyn Rwsa Rsrr • Sheet-off unit with additional die-cutting station • Suitable for adhesive label production _____ Equipment & Tooling • 6 sets of tooling • 6 anilox rollers • 3 magnetic cylinders (currently in production) _____ Technical Highlights & Advantages This OMET FlexyServo is a modern servo-driven flexo press offering excellent register accuracy and efficient production performance. Key advantages: • Servo technology for high precision and reduced waste • Strong UV drying system (GEW) • Flexible configuration with multiple die-cutting options • Well-maintained machine in excellent condition • Immediate availability with testing possible This machine is ideal for converters looking for a reliable and efficient narrow web solution. _____

Condition: like new (used), Year of construction: 2024, For sale: 8-colour offset printing press RMGT 970PF-8, configuration 8/0 or 4/4, with convertible perfecting unit. The machine is designed for high-quality industrial printing and is equipped with an extensive range of automation systems, including presetting, register control, cleaning systems, and colour measurement. Main technical specifications: Maximum paper size: 650 × 965 mm Minimum sheet size: 290 × 410 mm Minimum sheet size in perfecting mode: 370 × 410 mm Maximum printing area: 640 × 930 mm Maximum printing area in perfecting mode: 630 × 930 mm Maximum printing speed: 15,000 sheets/hour Stock thickness: 0.04–0.5 mm Plate size: 700 × 945 × 0.30 mm Feeder pile capacity: 1,100 mm Delivery pile capacity: 1,100 mm Machine dimensions L × W × H: 12,960 × 3,453 × 2,011 mm Equipment and features: PCS-G Printing Control System Rotary stream feeder Static eliminator on delivery Mechanical double-sheet detector Vacuum suction-type feeder board Paper size preset system Registration device Vertical and lateral image micro-adjustment Ultrasonic double-sheet detector Slewed sheet detector Side lay detector Front-lay Bernoulli device Side lay preset Printing, inking and dampening units: Straight edge plate clamp with positioning pins Infed lower swing gripper feed drum Gripper margin: 10 mm Remote control for vertical, lateral and diagonal register 19 inking rollers, including form rollers 4 dampening rollers R-matic dampening system Oscillating bridge roller Double-double-single perfecting cylinder configuration Delivery section: Static eliminator Chain gripper delivery Delivery jam detector De-curler device Lodpfxsy S S Azj Aa Rjrr Board insertion device Powder sprayer High pile delivery Delivery area sensor Paper size preset system Paper guide under the first delivery drum Delivery belt guide Belt-type vacuum slow-down wheels Additional options: Automatic feeder pile lateral alignment function Blower guide under the swing Pneumatic pull side guide Feeder air preset Impression pressure preset Impression cylinder cleaning function Feed drum fan-out adjustment mechanism Automatic blanket cleaning device Automatic ink roller cleaning device Smart-FPC plate changing device Ink form rollers 1st–3rd oscillating Hollow rollers for ink roller temperature control system R-matic_D remote ON/OFF Technotrans alpha.c chiller with alcohol density control Photo-type delivery pile lowering sensor Delivery fan antistatic eliminator PPC Server III for CIP-4 file transfer Press information display LithoFlash® Inline RMGT 970 Recto Verso automatic inline measurement system LithoFlash software package: LithoDyn ADR, LithoDyn JobChange, LithoFlash OneShot Machine raised by 200 mm The machine has CE marking, safety covers, tools, and documentation in English. The machine is sold in its current condition and at its current location — “as is, where is”. Inspection is possible by prior arrangement. An excellent solution for printing companies requiring a modern, high-performance 8-colour offset press with 8/0 and 4/4 printing capability and advanced process automation.

Year of construction: 2013, condition: good (used), • Max Sheet Size: 1,060 x 760 mm • Min Sheet Size: 400 x 350 mm • Max Cutting Size: 1,060 x 745 mm • Gripper Margin: 10 mm • Max Mechanical Speed: 7,700 sheets/hour • Paper Range: o Paperboard: 90–2,000 g/m² o Corrugated board: up to 4 mm (depending on flute) • Cutting Force: 260 tons Lrsdpjw E Iumefx Aa Rsr • Pile Height (Feeder/Delivery): o Feeder: up to 1,350 mm o Delivery: up to 1,150 mm • Feeder Type: Non-stop • Delivery Type: Non-stop • Register System: Optical and mechanical sheet alignment • Die-Cutting Plate Size: 1,080 x 760 mm

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, MACHINE BUILT 2009 / COMPLETELY REFURBISHED 2025 Ideal for collating calendars, folded sheets (signatures), cardboard boxes of all kinds, packaging, ... Type - MKW RAPID UT - System Belt conveyor table 32- Number of stations B3 - Format 35 x 50 cm GS - High pile up to 70 cm 1 Automatic Collator Type MKW RAPID UT / B3 / GS - With 32stations Belt-Conveyor-Table - Sheet sizes 10 x 14 cm up to 35 x 50 cm - High-Pile version with max. 70 cm stacking height - Paper weights up to 1.000 g/m² - Single sheets, folded sheets (signatures), carton, plastic foils, … - Belt conveyor transport table for continuous sheet transport - Timing belts radially adjustable for optimal sheet delivery - Timing belts radial adjustment via electrical clutches - Foldable transport fingers - Adjustable tilt suction heads for optimal pick up of sheets - Pressure-vacuum pump in sound-absorbing housing - Blown air for accurate sheet layering - Adjustable sheet layering - Electronic machine control by Industry-PC system - High quality color display for reliable and clear operation - Self-learning electronic missing/double sheet control per station - Missing/double-sheet control by Infrared sensor MKW IR - Tandem function for double use 2 : 1 (TANDEM-Mode) - Dynamic station selection for optimized pre-loading for the next job - Inserting function at any station possible - Alternating insert function at any station possible - Alternating cardboard function at any station possible - Speed display infinitely adjustable - Advance counter with adjustable stop for number of sets and stop time - Jam control along the transport table - Active safety: Transparent safety hoods made of unbreakable PolyC. - Ejector unit inclusive additional station at the delivery AW 3 incl. (for ejection of faulty sets) - Raising unit for delivery rollers AHB incl. (for different paper formats in one set and signatures) - Delivery Jogger-system integrated ASS i 3 incl. (for normal and criss-cross delivery, incl. X-Jogger) - Hand feeding station at left side HV 3 Lrodoxdy R Ispfx Aa Ror (incl. automatic station-control in case of operating error) 1 Prepiling-System for all stations Type MKW VS 3 - Mobile stacking pallets - Format up to 35 x 50 cm - 30 units fixed installation in front of the machine - 2 mobile stations in front of the collator (15+2+15) - 2 mobile pallets per station inclusive 1 High-Pile Non-Stop Delivery Unit Type MKW RAPID TD-3 - Automatic high-pile delivery up to 30 cm piling of sets - Format up to 35 x 50 cm - Staggered delivery of sets - Stacking function adjustable: straight stacking or offset function - Automatic delivery onto buffer belt - Buffer belt lenght approx 2,00 m - Counter function for pile height - Text display for operation and monitoring Warranty Time 12 month spare parts warranty (critical spare parts pack shipped with machine) (not inclusive are belts, bulbs, rubber parts, suckers, …) Package of free spare parts A package of the most important spare parts and consumables like rubber parts will be send together with the machine. Validity of offer Subject to prior sales Detailed offer on request

Condition: new, Year of construction: 2026, Oy Foudila Ab is a company, in Kaskinen, Finland with over 45 years of experience in equipment for timber handling. For the past 15-20 years, we have also been active in pallet industry and have developed a lot of machines over the years for nailing, automatic timber feeding and stacking. We manufacture both standard machines and customized solutions for the customer's purposes as stand-alone machines or machine lines. This machine is a flexible and efficient automatic board feeder developed for pallet production machines, but also well suited for other applications within the wood industry. The machine is specifically designed to integrate with both deck nailing machines and leg nailing machines, regardless of brand or capacity. We have supplied automatic board feeding systems to nailing machines from, among others, Cape, Corali, Storti, IMH, IM Hart, Viking and Mychrome. Thanks to the reliable vacuum system and the simple maintenance-free one-piece feeder – based on our own patented solution developed more than 40 years ago – only minimal adjustments are required when changing dimensions. This results in short changeover times and high operational reliability. The machine equipment also includes a tilting package lift that tilts the package approximately 10 degrees. This ensures that the boards remain stable and do not fall apart when the straps are removed, even if the boards are not perfectly aligned in the package. As optional equipment, the system can be complemented with: - Automatic turner - Vision/Camera system - Automatic removal of sticks between board layers The end result with this type of feeders is a reliable and flexible high-quality solution that enables more productive and cost-efficient pallet manufacturing. Material dimension of a standard machine: Board length: 600-1600mm, board width: 60-150mm, board thickness: 16-32mm Package length: 800-1600mm (packages with boards shorter than 800 should be on a EUR-pallet), package width 800-1200mm, package height: 0-1400mm Feeding capacity: 50 boards/min (with board width 100mm) Machine dimensions (LxWxH): 4300x3700x2800mm The machines is CE-marked. Do not hesitate to contact us for more information, pictures and videos. Lodpsyk Tlgsfx Aa Rsrr

Year of construction: 1999, condition: reconditioned (used), Machine is currently undergoing overhaul PROCESSABLE MATERIALS Depending on material properties and sheet configuration: · Paper with a minimum grammage of 80 gsm · Cardboard or solid board up to a grammage of 2,000 gsm · Corrugated board up to a total thickness of 4 mm (max. sheet curvature 4%) PERFORMANCE DATA Max. sheet format: 820 x 1,130 mm Min. sheet format: 350 x 400 mm Max. cutting force: (400 t) 4.0 MN Max. machine speed: 9,000 sheets/h Standard equipment of the machine: Feeder Non-stop high-performance sheet feeder W3 equipped with: • Automatic non-stop device • Automatic pallet changeover • Suction head • Double-sheet detector • Motorized stack side correction • Motorized suction head adjustment • Conveyor table with pneumatic cover frame • Compressed air and vacuum pump Register Table • Operator-side side lay, switchable between pull and push mode • Light sensor for accurate side alignment of sheets • Fine adjustment of the side lay • Two active front lays with light sensor for register control • Two inactive front lays for sheet stabilization • Separate fine adjustment of gripper edge for drive and operator side • LED display for accurate front and side lay registration • Trend display for sheet detection • Sheet rejection, disabling only the feeder • Height-adjustable top lay for positive sheet guidance Die-cutting station Ljdpoyuuzdjfx Aa Rjrr • Roller-guided support rails for the chase • Roller guide for die-cutting plate on swing-out support arms • Motorized die pressure adjustment • Automatic device for lifting the chase to the platen • Electronic die-cutting force display with max. pressure limitation • Vacuum device in sub-table for thin cutting plates Stripping Unit • Frame drive and frame lift for upper tool frame • Mount for the stripping board with centerline fine adjustment • Device for sample sheet removal • Upper tool frame • Lower tool frame Delivery • Fully automatic pile stacker, pre-selectable • Counted sub-stacks with automatic insertion of uncut sheets • Can form sub-stacks (interleaved sheets between 250 gsm – 800 gsm) • Frame lift for upper tool frame • Mount for change frames with electric adjustment in running direction • Pneumatic frame locking • Switchable gripper opener cam and sheet ejector • Sheet jogging device • Integrated conveyor belt for gripper edge or waste grid removal (double-cut) • Separator sheet magazine with electronic level control, refillable from B-side during production • Tool frame with centerline • Change frame for standard pile delivery / gripper edge removal • Change frame for blank separation grid • Mounting kit for separation punch • 8 x sheet hold-downs for standard pile delivery • 4 x cross support bars Options: • QTM – Patented guide rails • QTM – Chase with quick lock system and X/Y adjustment • QTM – Upper stripping frame with quick lock system • QTM – Upper delivery frame with quick lock system • Control upgrade to latest Siemens S7 controller • New generation frequency converters • Modem for remote service connection • Machine height increase: 900 mm

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Gantry (Portal) machine, belonging to the line (SOFIT code: W05025) Vacuum system (with its pump) Lrsdpjyywi Aefx Aa Ror N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arms with vacuum cups, adjustables N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which out-feed the panels from the Unloader) Separate electric and command panel Electronic Programmer PLC MAGELIS Perimetral safety metal grids Working capacity (cycles/min) 15-18 (ca.) Min/Max panels thickness mm 10 - 60 (ca.) Min dimensions of the panels mm 210 x 230 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw

Condition: ready for operation (used), Theisen & Bonitz 303 stitching unit Booklet Maker / Brochure Finishing Equipped with 2 Hohner stitching heads and delivery belt. 9-station high-pile collating machine Complete with 1 pump Max format: 350 x 50 cm Lredoy Sip Espfx Aa Rjr

Condition: excellent (used), Year of construction: 2009, operating hours: 56 h, 6. The tower is empty This machine can be used either as a standard 5-color printing press or as a 4-color printing press with coating. The 5th tower offers both options – a fully functional chamber doctor blade coating system (TRESU) and a fully functional color printing unit. RCI remote control for color and register (side and circumferential) Rolandmatic film dampening system with recirculation and cooling EPL Ergonomic Plate Loading automatic ink roller washing device automatic blanket and impression cylinder washing device Grafix Digital 3000 powder spray unit Grafix Select Dryer IR dryer extended high-pile delivery Ljdpfjy Ndpzex Aa Rerr standard accessories excellent condition, well maintained, only 56 million impressions