Used Dr. Datz Gmbh Dr. Datz Gmbh Vs8R Solo Screw Capper (2004) for sale (74,368)

Year of construction: 2025, condition: new, Brand new stainless steel agitator tank with beam agitator and load cells CILC2000RWS Volume: 2107L Dimensions approx.: Ø 1430mm x cyl. Height 1250mm Total height: approx. 1650mm (plus agitator motor) Material: 1.4301 stainless steel V2A Surface: inside BA (IIId), outside satin finish Welding seams in the container ground -Standing design on three feet -Top: hinged lid, central crossbar with 2 hinged lid halves with locking function (can be locked in 90° open position) -Metal grates below the hinged lid as protection against soap, screwed, removable -Bottom: conical bottom with central outlet DN50 DIN11851 nozzle -Agitator flange on the top -1x reserve nozzle DN50 DIN11851 on the top with blind cap -Type plate -180° spray head - Weighing cells - Speed control Agitator: Bar agitator Make: Schwarzer Rührtechnik GmbH Type: SRTGMK/1.5-149 Power: 1.5KW Speed: 149RPM Chsdjvtyf Ijpfx Ahmoc Operating voltage: 3PH 400V -Gearbox made by Getriebebau NORD -Solid agitator shaft with sleeve coupling attached to the gear motor, removable -Agitator shaft balanced for concentricity in the speed range -2 2-blade bar agitators Ø 500mm, height adjustable on the agitator shaft, attached via side power screws Grilled and passivated -Stainless steel flange with shaft seal and O-ring seal -MFR converter

Condition: new, Year of construction: 2026, Four-axis controlled shot blasting booth for cleaning die-casting molds, steel rings, permanent molds in aluminum casting, tire molds, press dies, and more. The travel path of the blasting nozzles is freely programmable. 2 automatic nozzles and 1 manual blasting nozzle for subsequent cleaning of the parts. Hardox rotary table and conveying screw for long-lasting operation of the blasting system. For questions regarding technical specifications, etc., please contact us in writing or by telephone. Cedpfodrtansx Ahmohc The machines are based on manufacturing at the Grossenlueder location since 1971. Harth & Seifert - Georg Fischer - Schiffmann and Seidl - Oliver Fritz GmbH & Co. KG, with their long-standing and well-known contacts.

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1605269/1, total width: 630 mm, total height: 1,115 mm, total length: 1,010 mm, working width: 460 mm, input voltage: 400 V, type of input current: AC, overall weight: 200 kg, power: 0.37 kW (0.50 HP), roller diameter: 100 mm, passage height: 80 mm, feed rate X-axis: 35 m/min, height adjustment type: mechanical, tank capacity: 2 l, roll width: 450 mm, input frequency: 50 Hz, workpiece height (max.): 80 mm, Equipment: double-sided, For sale is a well-maintained glue and roller application machine from Axel Wirth Maschinen GmbH, type LW 100/450. The machine was manufactured in 2021, has comparatively few operating hours, and is in technically perfect and well-maintained condition. A particular advantage is the adjustable working speed or feed rate (6 - 35 m/min). This allows the machine to be flexibly adapted to different workpieces, materials, and application media. The machine is mounted on a sturdy, mobile base with lockable wheels. As a result, it can be easily moved within the production area and safely positioned at the respective location. A total of two identical machines are available. The stated price applies per machine. An attractive package price is possible if both machines are purchased. The LW 100/450 is suitable for the uniform application of liquid and pasty media onto flat or textured workpieces, for example: - Glue and adhesive - Oil and wax - Stain and primer - Paints and dispersions - Resins and comparable application media Among other materials, wood, solid wood, parquet flooring, chipboard, cork, cardboard, metal, stone, rubber, and insulation materials can be processed. The application quantity can be adjusted via the lateral adjustment devices. The rollers and glue trays can be removed with a few simple steps, making the machine easy to clean. Technical data and equipment Chodpszr H Aasfx Ahmjc Manufacturer: Axel Wirth Maschinen GmbH Type: LW 100/450 Year of manufacture: 2021 Nominal width: 450 mm Working width: approx. 460 mm Passage height: approx. 80 mm Diameter of the application rollers: 100 mm Capacity per glue container: approx. 2.3 liters Drive power: 0.37 kW Adjustable working speed or feed rate Application rollers above and below Separate control cabinet Main switch and emergency stop Mobile base with lockable wheels CE marking Condition: used, well-maintained, and technically perfect Operating hours: comparatively low Inspection and test run are possible after prior appointment. Collection at the Leun location. Shipping by freight forwarder can be organized if required, upon agreement. If you have any questions or are interested, please do not hesitate to contact us. We will be happy to provide further information and photos. Price: €5,900 (negotiable) per machine plus VAT (can be shown). Package price for both machines: on request All information is provided to the best of our knowledge. The sale takes place under the conditions applicable to the seller for used machines.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 2080092, Used CNC horizontal 5-axis twin-spindle double-table machining center Manufacturer: SW – Schwäbische Werkzeugmaschinen GmbH Type: BAW06-22 Year of manufacture: 2011 Machine No.: 2080092 Weight: approx. 16,000 kg Chjdpfx Asz E Ddfehmec Technical data: - CNC horizontal machining center - 5-axis design - Twin spindle - Double table - Travel ranges: - X-axis: 600 mm - Y-axis: 600 mm - Z-axis: 510 mm - Rapid traverse: up to 45 m/min - Tool interface: HSK-A63 - Spindle speed: up to 17,500 rpm Equipment: Machine with standard accessories. Availability: Available in the short term.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. Codpfx Aszz Rpcjhmohc - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. Chodpfsz Agv Uox Ahmec - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. Chsdpfxoz Agw Ej Ahmec - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: Chjdpfx Ahjz Ag Rromjc - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Cjdpfxezizkys Ahmehc Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Year of construction: 2021, condition: like new (used), functionality: fully functional, Component 1: ATM-800 P Tangential Dereeler (2 pieces) Heavy-duty dereeler for controlled unwinding of copper wire coils. • Max. coil diameter: 800 mm • Max. coil width: 300 mm • Pickup hole: Ø52 / Ø56 mm • Max. coil weight: 300 kg • Braking force: 100 - 2000 N Chedsz Ap R Iepfx Ahmsc • Brake torque: 3 - 800 Nm • Max. speed: approx. 5 rpm • PLC control with torque sensor Component 2: HBK-40-S Automatic Taping Machine Professional automatic taping machine for coil and conductor insulation. • Servo-controlled taping head • Operator terminal and display • Integrated X-axis guidance • Electric hysteresis brake • Automatic overlap control via encoder • Suitable for various insulation materials

Year of construction: 2013, operating hours: 3,500 h, condition: used, functionality: fully functional, machine/vehicle number: 12400, TSM/tsi oscillating sieve machines are used for the classification, screening, and dust removal of bulk materials from almost all industrial sectors, such as stones and soils, chemicals, mining, pharmaceuticals, feed, and food. The machine for sale has a diameter of 1200 mm and is equipped with 3 sieve decks with mesh sizes of 3 mm, 1.4 mm, and 0.463 mm. In addition, spare sieves with the following dimensions are included: • 16 mm x 1 piece • 15 mm x 1 piece • 0.5 mm x 1 piece • 0.16 mm x 1 piece • 0.9 mm x 1 piece • 0.86 mm x 1 piece The drive has a power of 1.5 kW, 400 VAC, 50 Hz, 1450 RPM. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. Chsdjzmzbmopfx Ahmoc The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: good (used), Year of construction: 2020, functionality: fully functional, total length: 9,000 mm, Adhesive application cell with ABB robot IRB 4600-60/2.05. Included in the adhesive application cell: Robot (weight 425 kg, payload 60 kg, year of manufacture 2020) Chedszz Agmopfx Ahmoc 7th axis + steel structure (unlike in the images, the axis and steel structure have been extended to approximately 9 m) Adhesive application units Protective fences, etc. Not included: Roller shutter doors Fixturing device (available separately) Detailed drawings available upon request.

Condition: new, tank capacity: 437 l, wall material: stainless steel, Unused, temperature-controlled stainless steel container with insulation Article number: 10910 Volume: Approx. 437L Material: 1.4404 stainless steel V4A Surface: Interior IIId, exterior satin finish Welded seams inside the container pickled, passivated and brushed Operating pressure: ATM Operating pressure for thermoplates: Max. 1.8 bar -Vertical design on three legs -Top: 1/2 hinged lid, 1/2 fixed with screws, with tension handle (can be locked open) -Sheet metal grids below the hinged lid as a strainer, screwed on, removable -1x thermoplate on the cylinder, inlet/outlet connection 3/4", operating pressure max. 1.8 bar -1x thermoplate on the bottom, inlet/outlet connection 3/4", operating pressure max. 1.8 bar -Insulation t=30mm mineral wool for cylinder and bottom, welded stainless steel insulation jacket 1.4301 -Bottom: Conical bottom with central outlet and forward-extending pipe DN50 DIN11851 -Outlet valve: ball valve DN50 DIN11851, gasket EPDM/PTFE -Agitator flange on the top Container dimensions: Outer diameter: 650mm Cylindrical height: 1300mm Overall width: 750mm Overall length: 850mm Overall height: 1930mm Materials: Interior: 1.4404 / AISI 316 Exterior parts: 1.4404 / AISI 316 Features: Outlet diameter: DN50 Distance from outlet to bottom: 110mm Height of legs: 330mm Nameplate: yes Agitator: Chsdpfxjzwmr Ej Ahmec Variable speed propeller agitator for low-viscosity media Type: SRT8-1500-Vari Manufacturer: Schwarzer Rührtechnik GmbH Power: 0.75kW Speed: 1410 RPM (continuously adjustable) Voltage: 3PH 400V -Solid agitator shaft attached to the agitator motor, not removable -Agitator shaft balanced for smooth running within the speed range -1 piece 3-blade mixing propeller Ø 138mm at the end of the agitator shaft Mixing propeller made of a stainless steel casting, highly polished -Stainless steel flange, sealing V-ring, EPDM -Motor mounted on neoprene rubber buffers Infinitely variable speed control of the agitator motor via a compact, motor-mounted frequency inverter, manufactured by Getriebebau NORD. Including potentiometer. Pre-programmed for agitator operation. Operating voltage 3PH 400V

Condition: like new (used), Year of construction: 2014, operating hours: 10 h, functionality: fully functional, Fiber optic optical inspection system with various endoscopes, as shown in the attached photos. Cjdez Dicqjpfx Ahmshc

Year of construction: 2011, condition: good (used), functionality: fully functional, machine/vehicle number: K 0122, Equipment: CE marking, For sale: industrial machine K. Schulten KS AluKap 350-3, designed for the production of roller shutters with armored slats. The machine has been in use for 10 years. Technical data: - Manufacturer: K. Schulten GmbH & Co. KG – Germany - Model: KS AluKap 350-3 - Year of manufacture: 2011 - Machine number: K 0122 - Maximum slat width: 3500 mm - Minimum slat width: 500 mm Csdpfx Aszxcn Eohmehc - Power supply: 400 V / 50 Hz / 2.5 kW - Air consumption: approx. 250 l/min - Pneumatic system pressure: 8 bar - Weight: approx. 900 kg - CE marking Condition: used, operational. Reason for sale: replacement with a newer model. The machine will be available for collection in approximately 3 weeks. You are welcome to visit and see the machine in operation. Price: 20,000 EUR net.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, operating hours: 100 h, Gravimetric dosing and mixing system: Mixing system with 5 gravimetric dosing units 5 units: • Gravimetric screw dosing unit • Feeding hopper with pneumatic rotary valve, each with a lid • Screw conveyor for feeding from a big bag, with height-adjustable individual stand 1 unit: • Trough screw for combining and conveying the dosed materials into a transfer container. Chedpfxst S Rdus Ahmjc 5 units: • Big bag feeding station, with a suspension crossbeam to prevent the big bag from collapsing during emptying. • Big bag disc base with discharge aid (vibration drive) Option not included in the price: Control cabinet including control system Delivery EXW

Condition: excellent (used), Year of construction: 2016, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: 565697, type of input current: three-phase, input voltage: 400 V, belt width: 600 mm, conveyor belt width: 600 mm, The Wagner non-ferrous metal separator (NE separator), model 0429 from Wagner Magnete, is one of the manufacturer’s high-performance eddy current separators. Working width: 600 mm. • Throughput: depends on the material and grain size. • Rotor speed: up to 3,000 revolutions per minute. Chjdpezl Rfxefx Ahmsc • Belt speed: 0.5 to 2.0 m/s. • Weight: 1.2 tons. • Rotor system: Eccentrically mounted with a high pole-changing frequency. • Rotor drive: 4 kW; belt drive: 1.5 kW. The machine and the associated control panel are included in the delivery. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner’s expense and can be delivered EXW at a port or in the production facility. The details for optimal transport need to be clarified. The machine price is quoted without packaging on a pallet.

Condition: used, Year of construction: 2022, operating hours: 10 h, functionality: fully functional, machine/vehicle number: NS-009-50Hz-11kN-300, type of input current: AC, nominal power at 50% duty cycle: 160 kVA, throat depth: 300 mm, short-circuit current: 25,000 A, input voltage: 400 V, type of cooling: water, total width: 1,000 mm, total length: 1,000 mm, total height: 1,850 mm, overall weight: 1,000 kg, open-circuit voltage: 15 V, Zens Multifunction Spot Welding Machine 160 kVA – 50 Hz – 11 kN – Year of Manufacture 2022 For sale is a Zens multifunction spot welding machine in a robust industrial design. The machine is designed as a 50 Hz alternating current system and is suitable for various spot welding applications. The machine features an integrated seam welding adapter. The corresponding seam welding heads are not included in the scope of delivery and can be purchased separately. Thanks to the modular design of the machine, it is possible to use different welding tools and applications. Technical Data Manufacturer: Zens Model: NS-009 Machine Designation: Multifunction Spot Welding Machine Year of Manufacture: 2022 Welding Technology: Alternating Current (AC), 50 Hz Welding Power: 160 kVA Duty Cycle: 50% Max. Welding Force: 11 kN Welding Control: SER PLC Control: Siemens CE Safety: 2-Hand Control Seam Welding Adapter: Integrated Equipment Zens Multifunction Spot Welding Machine 50 Hz Alternating Current Technology Integrated Seam Welding Adapter SER Welding Control Siemens PLC Control Device Carrier System with Touchscreen 2-Hand Control as CE Safety Device Modular Machine Design Robust Industrial Design Available Separately Chedpfx Aoztn Sxohmjc The seam welding heads are not included in the machine's selling price and can be purchased separately. The "On Top" water cooling unit is also not included in the machine's selling price and can be purchased separately. The machine is in good condition and can be inspected and demonstrated by appointment. Note: Seam welding heads and the "On Top" water cooling unit are available separately and are not part of the machine offer. Subject to technical changes and errors.

Year of construction: 2017, condition: excellent (used), Tube cutting system with optical laser mark detection The FZH Vario Flex is a fully automated tube cutting system. Cedpfxjzw Ukce Ahmjhc It is specifically designed for the precise, reliable cutting of stainless steel tubes (e.g., for fuel, brake, air conditioning, or hydraulic lines). The system features optical laser mark detection. The control panel allows the user to select whether the cut is triggered mechanically (e.g., at the back of a union nut) or fully automatically via optical detection of a laser mark applied to the tube. Thanks to an integrated rotating 3-jaw cutting head and a micro-spray unit (minimum quantity lubrication), the machining process is extremely gentle on the tools. The tubes remain almost completely dry and free of heavy soiling. The entire process—from loading and clamping to cutting and unloading—is highly automated and follows a material-friendly cycle. Fully integrated labeling and traceability system: The system is designed to meet modern quality standards (Industry 4.0 / automotive). Following the cutting process, a barcode label is automatically generated, assigned, and printed to ensure seamless part traceability (tracking and system logging are directly integrated). Equipped with two separate bin discharge stations (rear-facing hatches with sliding doors), the system automatically switches to the second station when a bin is full. Finished KLT bins can be removed while the machine continues to operate, without interrupting the production cycle. Technical Data & Capacities Maximum tube length (feed): 1,000 mm Material specification: Optimized for stainless steel tubes (including those with pre-assembled union nuts or flared ends) Sensors & positioning: Optical sensors for automatic detection of laser markings on the workpiece Feed system: Automatic drum magazine / vertical disc feeder (for manual or automatic loading) Length adjustment: Continuously adjustable for different tube lengths via a manual handwheel Cutting method: Chip-removing sawing / rotating cutting head with three-jaw clamping and cutting mechanism (up to 600 rpm) Coolant/lubrication system: Integrated micro-spray unit (MMS) for minimum quantity lubrication Control system: Siemens SIMATIC HMI industrial PC with TFT monitor, keyboard, and mouse Setup mode: Mobile Siemens teach-in terminal for manual axis configuration and position storage Integrated labeling and barcode printing system Enclosure: Aluminum profile system with safety Makrolon panels Logistics / Output Integrated bin deposit station 2 separate bin output stations for rear-side removal via protected interlock systems with sliding doors Suitable for standardized KLT containers (600x400 mm and 400x300 mm) Manufacturer: FZH Engineering GmbH Type / Platform: Vario Flex Year of manufacture: 2017 Material: Stainless steel Cutting head: Vario Flex Special features: Tubes with union nuts Diameter: Ø 6–76 mm Output length: L = 150–1,000 mm Cutting based on laser marking Wall thickness: 1 to 1.3 mm Condition: The system is in good visual and mechanical condition in excellent, clean condition. “Everything from a single source: We would be happy to offer you suitable bank financing for your project.” komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: like new (used), functionality: fully functional, empty load weight: 900 kg, maximum load weight: 5,000 kg, overall weight: 6,000 kg, tire size: 300 x 80, tire condition: 100 %, trailer brake: trailer braked, Year of construction: 2025, Water tank trailer, 5000 liters - 25 km/h, with ABE (German type approval) Ideal for municipal services (gardening department), civil engineering, road construction for dust control, construction site supply, agriculture, or as a professional water tank for large companies – anywhere where water is needed on site. Equipped with a mounted wide-spreading nozzle and spray bar with nozzles. Coupling height approx. 700 mm. Automatic support wheel with folding mechanism. Cjdpfx Aozy Dy Eshmehc PTO pump for filling and emptying. Additional PTO pump for operating a high-pressure cleaner. As-new demonstration unit from 2025. Please send us your realistic offer. VAT can be shown separately.

Year of construction: 2002, condition: good (used), functionality: fully functional, machine/vehicle number: 023116, Wenzel RS 1012 CNC 3D Coordinate Measuring Machine The Wenzel RS 1012 is a CNC 3D coordinate measuring machine (CMM) with a horizontal-arm design, engineered for the precise measurement of medium-sized to large workpieces, such as components and assemblies. The machine design is based on a stable cast iron or granite base plate serving as the measuring table, with a side-mounted guide system that allows for open loading from three sides. Key Technical Components & Specifications Machine Type: Horizontal-arm 3D coordinate measuring machine (CMM) Manufacturer: WENZEL Präzision GmbH Model / Year of Manufacture: RS 1012 / 2002 Serial Number: 023116 Measuring Volume (X/Y/Z): 2,000 mm × 1,000 mm × 1,200 mm Probing system: Renishaw PHC10-3 PLUS (interface/control for PH10 motorized rotary-tilting head) Design: Horizontal-arm measuring machine (column-type CMM) with integrated base plate Measuring accuracy (MPE): 15.0 μm+ (L / 45.0 mm total maximum longitudinal measurement error in the measuring range is approximately 50.0 micrometers) Sensor system (standard configuration): Delivered without a PC Key Features of the RS Series High Flexibility: The machine generally does not require a special foundation and can be flexibly integrated into existing production and laboratory spaces. Barrier-Free Accessibility: Thanks to the horizontal arm’s lateral guidance, the measuring table is freely accessible, which facilitates the loading of heavy workpieces using a crane or forklift. Multi-sensor technology: In addition to tactile sensing systems (such as the TP20), the series can often be equipped by the manufacturer with optical line lasers or scanning sensors. “Everything from a single source: We’d be happy to offer you suitable bank financing for your project.” komplett-konzept.leasingo.de Chjdpfx Ahozz Hywemjc

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-600 • Type: Double Helix Screw Washer • Capacity: 60 ton per hour • Dimension: 1400 x 6650x1800 mm Chjdpfsz Dvrrsx Ahmoc • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min • Motor: 2 x 5.5 kW Heavy duty Gamak • Water Consumption: 55-205 m3 • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Year of construction: 1992, condition: used, functionality: fully functional, machine/vehicle number: 029.700, Painting/drying booth from Luft- und Trockentechnik GmbH, type KSP 6-BT, manufactured in 1992. The system is suitable for painting and drying workpieces and features an integrated exhaust/extraction system. Codpoz D Evyofx Ahmohc Technical data: Manufacturer: Luft- und Trockentechnik GmbH Type: KSP 6-BT Year of manufacture: 1992 Manufacturer's number: 029.700 Usable volume: approx. 72 m³ Total volume: approx. 81 m³ Minimum exhaust air volume flow: 1,440 m³/h Maximum permissible oven temperature: 90 °C Maximum solvent quantity: 4,302 g/oven load The painting booth has dimensions of 6 x 4 meters. The system includes an exhaust duct with extraction via the roof. In addition, a suspension/transport system is located in the ceiling area, to which workpieces or painting racks can be attached and moved through the work area. Dismantling will be carried out by the buyer.

Year of construction: 2024, condition: like new (used), functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Csdpfx Ahez Hax Usmehc Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: new, Factory-new agitated vessel with dissolver Type: STOC2200RWD Volume: approx. 2,266 liters Design: Vertical construction on three height-adjustable feet Construction: Single-walled Medium-contacting material: 1.4301 stainless steel (AISI304) Surface: External satin finish, internal BA (IIId) Internal weld seams: Pickled, passivated and brushed Max. operating pressure: Atmospheric Max. operating temperature: 95°C Top: 15° conical top Bottom: 15° conical bottom with central outlet DN50 DIN11851 Tank dimensions: Tank diameter: 1,430 mm Cylinder height: 1,250 mm Total height: 2,160 mm Foot height: 500 mm Outlet to floor distance: 350 mm Equipment: 1x Ø 500 mm manway cover with swivel bracket on top, EPDM gasket 1x agitator flange connection IEC200 3x calotte / height-adjustable feet 1x stainless steel vent/bleeder valve DN50, non-pressurized, on the top 1x DN50 DIN11851 outlet port centered in the bottom Csdjw Dy Hlopfx Ahmehc 1x DN50 DIN11851 port with blanking cap on the top 1x DN65 DIN11851 port with blanking cap on the top 2x lifting lugs on the top 1x ladder bracket on the cylinder 1x nameplate Agitator: Dissolver Manufacturer: Schwarzer Rührtechnik GmbH Type: SRTDMK/7.5-1500 Power: 7.5 kW Speed: 1,410 RPM Operating voltage: 3PH 400V - Heavy-duty agitator shaft mounted to the agitator motor with muff coupling - Agitator shaft dynamically balanced for smooth running within the speed range - 1 piece dissolver disc Ø 275 mm screwed onto the end of the agitator shaft - Stainless steel flange with V-ring seal, EPDM - Motor mounted flexibly on neoprene rubber-metal buffers