Used Drawbar Head, Drawbar Eye for sale (13,075)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,650 kg, maximum load weight: 9,850 kg, overall weight: 13,500 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 450 mm, total length: 6,900 mm, total width: 2,550 mm, total height: 1,680 mm, suspension: steel, tire size: 285/70 R19,5", tire condition: 100 %, Year of construction: 2026, - Bespoke transport solution - Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and equipment are carried out individually to customer specification. #Chassis – centre-axle tipping trailer - Steel welded construction, continuous rear tipping shaft with 80 mm ball-type tipping bearing - Geared support leg at front - Foldable rear support - 2 wheel chocks with holder - Steel rear underrun protection Ledpfx Aozd D Scsgrshl - Mudflaps at rear, full width - Quarter-shell mudguards - Lockable storage compartment for loading ramps beneath the load bed - 1 plastic tool box with removable tray, w=620/h=360/d=440 mm, lockable with a padlock - Note: side board touches the storage box when folded down - Lockable storage compartment for loading ramps beneath the load bed - Drawgear for centre-axle trailer - Drawbar with approved 40 mm tow eye - Drawbar height-adjustable via spindle, max. adjustment range 300 mm #Axles & suspension - SAF drum brake axles - "Laser-aligned axles/running gear" – reduces tyre wear and fuel consumption - Parabolic suspension with maintenance-free rubber-steel bushings and mechanical axle-load equalisation (rocker equalisation) #Wheels & tyres - 285/70 R 19.5" - Manufacturer's choice - Steel rims, factory silver #Braking system - 2-line air braking system - Spring-loaded parking brake - 2 anti-mismatch coupling heads at front, with connecting lines to the towing vehicle - ABS and ALB, with ABS socket at front, with connecting cable - Caution: this trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! #Electrics - 24 V, multi-chamber lights, yellow LED lighting on the sides - 2 white position lights at front - 2 white/red outline marker lights at rear - 2 x 7-pin anti-mismatch plugs at front, with connecting cable #Hydraulics - Three-way tipping gear, hydraulic multi-stage telescopic ram with stroke limiter and safety cable - Low-pressure cylinder up to max. 170 bar, without restrictor valve; to be retrofitted on the truck if required - Hydraulically operated via the truck's PTO - Hydraulic connection with quick-release coupling, DN 10/3, incl. connecting hose #Tipping body - Sturdy tipping body with 4 mm steel sheet floor, steel side-board structure, continuous side walls, foldable and pivot-mounted with central locking at the bottom; rear corner posts, plug-in type; tailgate foldable and pivot-mounted, with central locking at the bottom - Platform length approx. 5,000 mm, side walls with 6 hinges at the bottom - Side-board return springs - Platform width 2,420 mm - 5 pairs of lashing eyes in the floor, 5 t each #Operating notes - The stated gross vehicle weight is technically achievable; depending on the load, it may not be reached while observing the permissible axle, support and fifth-wheel loads #Country of registration/plates - Country of registration: Germany - With DEKRA inspection and certificate (in accordance with §13 EG-FGV) - 24/7 service hotline - Prepared for single-line number plate holder - Contour marking with reflective strips to ECE R 048, white on the sides and red at the rear #Paintwork - Frame hot-dip galvanised incl. passivation - "15-year warranty against corrosion perforation" - Side boards/platform painted in colour of choice - Bespoke transport solution

Condition: used, maximum load weight: 36,250 kg, overall weight: 41,000 kg, axle configuration: 3 axles, first registration: 10/2025, next inspection (TÜV): 10/2026, Equipment: ABS, Excerpt from the equipment list. Complete equipment list available upon request. Frame: Chassis frame made of high-quality steel, but without an outer frame. Coupling plate with a 2-inch drawbar eye according to DIN 74080 / ISO 337. With crossmember and container locking mechanisms for accommodating: a) 1 x 45' High-Cube container b) 1 x 40' High-Cube container c) 1 x 30' ISO container, flush at the rear d) 2 x 20' ISO containers e) 1 x 20' ISO container, flush at the rear g) 1 x 45' ISO container h) 1 x 40' ISO container With 1 pair of height-adjustable container locking mechanisms and 3 pairs of foldable center supports, plus crossmember and container locking mechanisms for accommodating: f) 1 x 20' ISO container in the center Frame extension at the rear, mechanically extendable, load capacity approx. 5,800 kg, with spiral cable. Low-maintenance guidance on special plastic sliders and 2 extension rollers. KÖGEL frame extension at the front, manually extendable and mechanically lockable, incl. container guide on the left and right. Designed according to Directive 719/2015. Frame extension in the center, manually extendable and mechanically lockable with the tractor unit. Lsdpfszkx Hzex Agrohl Chassis: Axle lift mechanism on axle 1. Control of the axle lift is fully automatic and load-dependent. Starting aid: Activation via 3x brake, 30% overload up to a speed of 25 km/h. Operation on the chassis via switch. Additionally possible from the cab (switch in the cab necessary - PIN 12). When transporting 30' and 45' containers, the 1st axle CANNOT be lifted! BPW three-axle unit, with disc brakes Ø approx. 430 mm, mounting depth approx. 120 mm. Air suspension with approx. 180 mm travel. Vehicle Tires: Wheels with internal sensors according to UN ECE R141. Tires 6-fold 385/55 R 22.5 UNIROYAL TH 50. 6 steel rims 22.5 x 11.75, mounting depth approx. 120 mm (ET 120). Chassis Components: JOST landing gears, mechanically operated with leveling foot, 24 t lifting capacity. One-sided operation in the direction of travel, on the right. Splash guard system (spray suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with 22.5 tires, consisting of: 3 pairs of semi-circular fenders with mud flaps. 2 chock blocks with holder. Side protection, according to ECE-R73, closed. Rear underrun protection made of square steel tube according to ECE-R58, screwable. Height of the underrun protection profile min. 120 mm, designed for increased test forces. Brake / Air Suspension System: EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638 (without connection cables), parking brake as spring brake, external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 plug connection. Air suspension system incl. 1 raising and lowering valve, mounted on the left in the direction of travel in front of the axle unit. 2 non-interchangeable coupling heads at the front ISO 1728. Air reservoir for brake system and air supply made of steel (EN 286-2). Rear Impact Protection: Continuous steel rear impact protection, solid, on the end member at the rear. Information Systems: Tire pressure monitoring system according to UN ECE R141. Accessories: Document tube, diameter approx. 105 mm. Mounting on the left in the direction of travel on the side protection. 1 fire extinguisher 6 kg with pressure gauge (European approval). Mounting incl. holder and protective cover on the left in the direction of travel o

Condition: used, machine/vehicle number: WFDFLT21301006798, empty load weight: 2,600 kg, maximum load weight: 10,800 kg, overall weight: 13,400 kg, axle configuration: 2 axles, first registration: 05/2017, tire size: 285/70 r19,5, Further information: Fine-grained steel welded construction, fifth-wheel coupling, manufacturer at our discretion for 2 kingpins, telescopic support leg, chocks with holder, steel underrun protection, half-shell fenders, removable upper parts Lodpfxei Rivto Agrohl Drawbar with tested 50 mm drawbar eye, lower coupling for drawbar BPW disc brake axles, air suspension with raise and lower valve, mechanical dolly steering system (required in Germany to comply with the BO-Kreis regulations) 2-line compressed air brake system, spring-loaded parking brake, Duomatik coupling head at the front, with connecting lines to the tractor unit, Duomatik coupling head for the semi-trailer, including connecting coil, EBS, electronic brake system with EBS plug at the front, with connecting cable EBS connecting cable to the semi-trailer, with CAN router, axle load detection for the truck via EBS, without truck installation. Note: The trailer may only be pulled by tractor units that ensure the effectiveness of the ABS! 24 volts, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, 1 x 15-pole plug at the front, with connecting cable to the truck, 1 x 15-pole socket, with connecting coil to the semi-trailer, cable for reversing camera system with socket with DEKRA approval, prepared for single-row license plate holder, contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear, warning sign according to ECE - 70 Saddle height approx.: 960 mm

Condition: used, Year of construction: 2024, 935-1450 Expert opinion for operating equipment Drawbar with drawbar eye 51mm Track eradicator / hydr. front level board s+double spring Coulter set HM goose foot coulter / DSTS roller 111mm Air brake Tined Weeder DSTS roller 111mm Lighting / filine / Lhjdpfx Agotvgm Serjl

Condition: used, machine/vehicle number: WFDFLT21301003569, empty load weight: 2,400 kg, maximum load weight: 11,000 kg, overall weight: 13,400 kg, axle configuration: 2 axles, first registration: 03/2014, tire size: 285/70 r19,5, Further information: Fine-grained steel welded construction, fifth wheel coupling, manufacturer to our choice for 2 kingpins with ball bearing swivel, stop max. 20°, telescopic support leg, 2 chock blocks with holder, steel underrun protection, half-shell mudguards. Lhedei Rizmopfx Agrol CLG drawbar with tested 50 mm towing eyes for the dolly and the tractor unit. BPW disc brake axles, air suspension with lift and lower valve. 2-line pneumatic brake system, spring-loaded parking brake, Duomatic coupling head at the front, with connection lines to the tractor unit, 2 fail-safe coupling heads for the semi-trailer. EBS, electronic brake system with EBS plug at the front, with connection cable, CAN router, EBS connection cable to the semi-trailer. Note: The trailer may only be pulled by tractor units that ensure the effectiveness of the ABS! Axle load recognition for trucks via EBS, not installed. 24 Volt, multi-chamber lights in LED, yellow LED lighting on the sides, 2 white position lights at the front in LED. 2 white/red marker lights at the rear in LED, 1 x 15-pole plug at the front, with connection cable to the truck, 1 x 15-pole plug with connection cable to the semi-trailer, cable routing for camera system. Country of registration: Germany, with Dekra approval, prepared for single-row license plate holder, contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear. Fifth wheel height approx.: 1150 mm.

Condition: good (used), Year of construction: 2007, Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering, electric hand pallet truck -Manufacturer: Jungheinrich, drawbar complete with drive from electric pallet truck ECE 118 -Drive motor: 24 VDC / 1.6 kW -Individual components: see photos -Number: 4x drawbars available -Sale/Price: per piece -Dimensions: 1530/480/H290 mm Lhjdpfx Aoiz Dr Aogrel -Weight: 87 kg/unit

Condition: used, Year of construction: 2020, max. workpiece length 6360 mm profile spindle 1 Stück main drive 13 kW Control Maestro SCM CNC Machining Center ACCORD 40 FX for windows and doors ----- Available as an OPTION at an additonal cost of 20.000 Euro: extensive window and door tooling among others (window cutting available upon request!): Wooden windows IV 68, 78, 92 Wooden "style" windows Wood-aluminum windows Front doors Lift-and-slide doors Box windows Machine still in operation, available for viewing! Technical Summary (detailed description available upon request!): ----- - ??Working area X-Y = 6360 x 1905 Z = 350 - Automatic table with 8 support rails MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW - RTCP Setting - Self-calibration system for Prisma work unit - Adjustable chip removal device on the electric spindle - Preparation for "Prisma T-S" angle gearbox - BRC - Working unit: Saw blade for face machining, 1 vertical milling cutter connection 3 vertical, independent drill heads, center distance 32 mm 3 vertical drill heads (not independent), center distance 21.5 mm, for mortise drilling 4 horizontal drill heads (2 per side, not independent), center distance 21.5 mm 2 horizontal milling heads (1 per (Page) - TRC 48 - Rear Tool Magazine 48 tool positions (excluding tool holders) Center-to-center distance between positions: 104 mm Max. tool diameter: 350 mm Max. tool length: 320 mm Max. weight per tool: 10 kg (15 kg with HSK 63 E spindle) Max. total weight on the magazine: 250 kg - MACH 5 - Quick-change system: Allows tool changes on the electric spindle in just a few seconds. - Pendulum operation - Automatic lubrication of the axes - eye-M operating console with integrated PC - Additional fixed control panel - TECPAD - Remote control of machine functions - Clamping jaw preparation H145 for worktable with 8 support rails - Front stop row H110 for worktable with 8 support rails - Rear stop row H110 for worktable with 8 support rails - Suction cup H110 145x145 mm - Swivel suction cup H110 145x55 mm - Swivel suction cup H110 180x65 mm - First side stop row H145 for worktable with 8 support rails Second side stop row H145 for worktable with 8 support rails Clamp H145 with round base Clamp H145 with square base N.6 Lifting devices with double stroke H145 Lhodpfx Aey Hl Iyegrel Laser and reference stop H145 for sheet (left) - PRO-SPEED safety system - Maestro CNC - Machine operator interface and programming - Maestro ProView - Simulation software Tools are sold in the condition, scope, and with accessories as they are currently in stock. Note regarding window cutouts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems listed and drawn. (Technical specifications according to the manufacturer - without guarantee!)

Condition: used, maximum load weight: 7,400 kg, overall weight: 11,000 kg, axle configuration: 2 axles, first registration: 07/2000, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 400 mm, Year of construction: 2000, Equipment: ABS, Stock No. 5884 Approx. 5.00m Müller-Mitteltal 2-sided tandem tipping trailer with folding ramps ----* Manufacturer: Müller-Mitteltal * Type: ETK-TA-S * First registration: 07/2000 * Gross vehicle weight: 11,000 kg * Unladen weight according to vehicle registration document: 3,600 kg * Payload: 7,400 kg * Axles: 2 x BPW / drum brakes * Suspension: leaf spring suspension * Tires: 235/75 R 17.5 approx. 50% remaining * Color: Chassis grey, tipping body red * ABS * Internal dimensions of tipping body: approx. 5.00m long x 2.42m wide, side walls 0.40m high * Mechanical, 2-part ramps (2.10m + 1.30m = 3.40m) * Steel floor with 4 pairs of folding lashing eyes * 40 mm drawbar, height-adjustable Lhjdpfxsz A Nwfo Agrjl * Quarter fenders, 2nd axle * Spare wheel holder * LED reversing lights * 2 x LED work lights, front * Full-load support, front * Additional supports, rear German trailer!! German documents!! Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, occasional errors may have crept into the text or the information provided. We assume no liability for errors, changes, or interim sales. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: used, machine/vehicle number: WFDFLT21301008306, empty load weight: 2,000 kg, maximum load weight: 11,400 kg, overall weight: 13,400 kg, axle configuration: 2 axles, first registration: 11/2018, tire size: 285/70 r19,5, Further information: Fine-grained steel welded construction, fifth wheel coupling, manufacturer's choice for 2 kingpins, with ball bearing swivel, stop max. 20°, lockable, support on the drawbar, shims with holder, steel underride guard, quarter-panel fenders in front of and behind the axle assembly, with tarpaulin cover for empty journeys. CLG lower coupling drawbar with tested 50 mm towing eyes for the dolly and the tractor unit. BPW disc brake axles with 370 mm disc diameter, air suspension with raise and lower valve. 2-line compressed air braking system, spring brake parking brake, Duomatik coupling head at the front, with connecting lines to the tractor unit, 2 keyed coupling heads for the semi-trailer, incl. connecting spiral cable. EBS manufacturer Wabco, electronic braking system, with CAN router, with EBS plug at the front, with connection cable. EBS connection cable to the semi-trailer. Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! Axle load recognition for trucks via EBS, not installed for trucks. 24 Volt, 4 x 3-chamber lights + 1 round rear fog light, yellow LED side lighting, 2 white position lights at the front, 2 white/red marker lights at the rear, 1 x 15-pin plug at the front, with connection cable to the tractor unit, 1 x 15-pin socket, with connecting spiral cable to the semi-trailer, cable for reversing camera system with socket, additional LED work lights at the rear, switched via reversing light. Country of registration: Germany, with Dekra inspection, prepared for single-row license plate holder, contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear. Ljdpei Riyaefx Agrshl Fifth wheel height approx.: 950 mm.

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 07.019.0000.00 / 114247 / 006, The mobile nozzle pack installation device from Theilen Maschinenbau is designed for lifting and positioning nozzle packs during assembly work. The welded frame structure is mounted on four swivel castors and features side handles for manual movement. The upper working beam is raised by a centrally mounted hydraulic hand jack and guided by two vertical guide elements. The beam is fitted with adjustable supports and mounting pins. The maximum load capacity is 200 kg. The device was manufactured in 2020 and bears CE marking. Safety symbols indicate a hot surface, an overhead hazard and the required use of head, hand and eye protection. Ledpjzw T Duofx Agrehl Manufacturer: Theilen Maschinenbau GmbH Type: Nozzle pack installation device Number: 07.019.0000.00 / 114247 / 006 Year of manufacture: 2020 Maximum load capacity: 200 kg Lifting mechanism: Hydraulic hand jack Construction: Welded frame structure Undercarriage: 4 swivel castors Beam guidance: 2 vertical guide elements Conformity marking: CE

Condition: refurbished (used), functionality: fully functional, Year of construction: 1968, machine/vehicle number: 51039/373, Rausch RS 6G (WAG 855) Vertical Internal Broaching Machine Manufacturer: Rausch (Haan/Rhineland) Model: RS 6G / 1000 Machine No.: 51039/373 Lsdpjv Rmvzsfx Agrehl Year of manufacture: 1968 Weight: 800 kg Revision: December 2024 by Wiemers AG General / Technical Specifications: Completely overhauled, mechanical vertical broaching machine Rausch RS 6G, unused with "CE" marking Tensile force: 60 kN (6,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Max. stroke: 1000 mm Max. tool length: 1200 mm Table dimensions / work surface: 610 x 470 mm / 520 x 320 mm Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: any Dimensions (h x w x d): 1600mm x 850mm x 1000mm (h = table height to floor without attachments) Motor power: 4.4kW / 5.5kW Power supply: 400V / 50Hz Features: - Geared motor drive with 2 working speeds - Reinforced drawbridge made of tool steel for greater pulling forces - Safety door with automatic door locking and safety interlock - New chip chute with tool storage option - Protective cover for the stroke adjustment - Oil-tight storage on the control cabinet - Electrical scanning of the clamping jaws (tool removal control to prevent unintentional retraction of the drawbridge, providing additional safety for the operator and tools) - Integrated coolant system with electrically switched solenoid valve and drain cock - Coolant swivel system, with automatic coolant switching via the swivel system - Chip sieve with magnet - Externally adjustable tool length adjustment system (reproducible across all machines) - Stainless steel control panel with durable markings - 4 central lubrication points for the trapezoidal spindle drive with manual grease gun Note: The machine has been completely overhauled. During the overhaul, the machine base, machine body, and machine table were completely reconditioned. All wear parts have been replaced. The machine has been updated to the state of the art and complies with current CE regulations. The machine is marked with a CE certificate. General The double spindle drive ensures a smooth and central pull point and a constant broaching speed (broaching speed optionally at 3 m/min or 6 m/min). Due to its design, the machine can be quickly and easily set up for broaching with flat broaching tools for keyways. The universal design of the drawbar and machine table allows broaching with profile and flat broaching tools without the use of additional drawing heads. Broaching tools and broaching mandrels suitable for the machine are available on request.

Condition: like new (used), Year of construction: 2009, functionality: fully functional, Tool Milling Machine Emco C40 Linear with Digital Display and Path Control – Excellent Condition, Tool Holders, CE-Compliant! Technical Data: Lhsdjyliffspfx Agrjl >> Year of manufacture: 2009 Machine No.: BA1GX1201 >> Milling table clamping area: 800 x 400 mm Number of T-slots: 8 Slot width: 14 H8 Slot spacing: 50 mm Maximum load: 300 kg >> Infinitely variable spindle speeds: 10–5000 rpm >> Infinitely variable feed rate: 10–2000 mm/min Rapid traverse X-axis: 5000 mm/min >> Travel X/Y/Z: 450/350/400 mm >> Vertical and horizontal spindle – SK40 taper >> Manual drawbar system >> Quill stroke: 80 mm >> Weight: approx. 2000 kg >> Dimensions (approx.): 2.5 x 2 x 2 m >> Main drive motor: 7 kW >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Folding machine enclosure >> Coolant system >> Machine lamp >> Tool trolley with tool holders About the machine: Offered is a tool milling machine Emco C40 Linear with path control. This universal milling machine is in an almost mint condition. It comes from a government facility where it was only used minimally. The control system is very user-friendly. Switching from vertical to horizontal operation is very easy by simply swivelling away the vertical head. The Emco has been mechanically and electrically tested by us. Take the opportunity to view and test the machine under power at our facility.

Condition: used, machine/vehicle number: WFDFLT21601003376, empty load weight: 2,600 kg, maximum load weight: 10,800 kg, overall weight: 13,400 kg, axle configuration: 2 axles, first registration: 01/2014, tire size: 285/70 r19,5, Further information: Fine-grained steel welded construction, fifth wheel coupling, manufacturer at our discretion for 2 kingpins, telescopic support leg, chock blocks with holder, steel underride guard, half-shell fenders. Drawbar with tested 50 mm drawbar eye, lower coupling drawbar mechanically adjustable in length. BPW disc brake axles, air suspension with raise and lower valve, electronic dolly steering system, sensor via contact in the drawbar eye (required in Germany to comply with the BO-Kreis regulation, or the semi-trailer must be steerable). 2-line pneumatic brake system, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front, with connecting lines to the tractor unit, 2 non-interchangeable coupling heads to the semi-trailer. EBS, electronic braking system with EBS plug at the front, with connecting cable, EBS connecting cable to the semi-trailer, axle load recognition for the truck via EBS, without truck installation. 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, 1 x 15-pole plug at the front. Registration country: Germany, with Dekra approval, prepared for single-row license plate holder, contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear, warning sign according to ECE - 70. Fifth wheel height approx.: 960 mm. Ljdpfxoi Riyds Agrjhl

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2026, Year of construction: 2026, Equipment: ABS, Specification: External Roller 20 AR * Novagrau * 2-axle trailer chassis for containers * External roller version (20AR) * Dimensions and Weights * External reference length approx. 6,896 mm * Overall width approx. 2,500 mm * Ride height loaded approx. 1,175 mm * Roller track length approx. 6,880 mm * Wheelbase 5,100 mm * Unladen weight (complete) approx. 3,860 kg * Technical possible gross weight approx. 20,000 kg * Permissible gross weight approx. 18,000 kg * Payload approx. 14,140 kg * Suitable for containers from 5,000 to 7,000 mm length according to DIN 30722 * Chassis with cross members, welded box-section main beams * Made from QSTE steel * 4 container locks, pneumatically operated * Side underrun protection closed according to RL 89/297/EEC * Pivot mounting * Pivot mounting 980 FM incl. ball race ring 90/1100/22 (low maintenance) * Drawbar * Drawbar 2600/980/100/30, towing eye inclined * With height adjustment (tension spring with turnbuckle) * Drawbar with DIN towing eye, internal Ø=40mm, external Ø=110mm, thickness 30mm * Axles * 2 x 10 t axles for 19.5 disc brakes, brand according to manufacturer selection * Brake disc diameter approx. 370mm * Wheel attachment by central centering as per DIN 74 361 part 3 * Brake System * Pneumatic brake system according to EU guideline with Duomatic coupling head * Conventional air suspension * EBS Type 4S/3M, Electronic Braking System with ROLL Stability * Double diaphragm spring-actuated cylinders on rear axle * Release valve for individual release of spring parking brake * Lighting System * 24 Volt full LED lighting system to RL 76/756/EEC with multi-chamber tail light and license plate light integrated in lamp bracket * 1 x 15-pin socket * 6 LED side marker-reflector lights with flash function * 2 LED white position lights at the front * 2 separate LED lane marker lights at the rear * 1 additional reversing lamp * Regional haulage tires, brand as per manufacturer selection * 8 x 265/70R19.5 (7.5x19.5) * Steel wheels ET 138 * Wheel nuts unpainted * Including tire pressure monitoring system * Rear underrun protection made from aluminium * Two vertical Delta anti-collision profiles to protect the rear when loading/unloading Lodpfx Aeyv Ttpogrjhl * Accessories * 4 plastic fenders (half-shell) front and rear, single wheel fenders * 4 anti-spray mudflaps, neutral * 1 lockable plastic toolbox * 1 wheel chock with holder * 1 A-sign for waste transport * 1 hanging net box * Chassis color: MB7350 Novagrau * Wheel hub color: black KTL * Rim color: RAL 9006 Silver * Rear contour markings: red * Side contour markings: white * Closed SSE: RAL7001 silver grey * Rear panel/light plates: RAL7001 silver grey * Underrun protection: aluminium anodized (silver) All information subject to change. Errors and prior sale excepted.

Condition: new, maximum load weight: 14,160 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 6,900 mm, loading space width: 2,170 mm, total width: 2,550 mm, total height: 1,100 mm, Year of construction: 2025, Equipment: ABS, Two-axle trailer for the transport of roll-off containers from 5,500 to 7,250 mm in length. Wielton new model, PS-2/P70B Unladen weight approx. 3,840 kg Available immediately! Equipment: SAF disc brake axles 265/70 R19.5 Goodyear Kmax twin tires Incl. spare wheel with winch Air suspension Raise and lower valve EBS 4S/3M WABCO braking system Pneumatic container locking system Mechanical front container stoppers Drawbar L 2,100 mm with 40 mm Ø towing eye Side underrun protection made from aluminum profiles with advertising space Steel rear underrun protection 1x lockable toolbox 1x mesh box Lamp bracket made from lightweight steel sheet Aspöck lighting system Full LED tail lights 2x LED reversing lights 15-pin connector Air connection: ISO coupling heads (conversion to DUOMATIC available at extra cost) Available to order. Ljdpfx Aezyd Enjgrjhl Further information and an offer available on request Office hours: Mon - Fri 09:00 to 17:00 Subject to prior sale and errors for this offer. Only the agreements in the order confirmation or purchase contract are binding. Exact scope of equipment and pricing will be provided by our sales team. Please contact us.

Condition: reconditioned (used), Year of construction: 1984, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 340 mm, quill stroke: 80 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, table length: 210 mm, table width: 600 mm, total height: 1,750 mm, total length: 1,400 mm, total width: 1,600 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 40 rpm, overall weight: 850 kg, table load: 200 kg, warranty duration: 3 months, The machine underwent a factory or partial overhaul by us in 2026 and is in top condition. As part of the partial overhaul, a new brake motor was installed. Control System 3-axis – active – digital display HEIDENHAIN TNC 113 Spindle Speed 40–2000 rpm, geometrically stepped direct drive with 18 speed levels for maximum torque and milling performance Feed Rate 5 to 500 mm/min, infinitely adjustable Rapid Traverse 1.2 m/min Ljdpfx Ageyi Amwerehl Quill Extendable quill, vertical 80 mm SK40 with M16 drawbar thread, optionally with DECKEL saw thread S20 x 2 Extendable quill, horizontal approx. 100 mm Axes X/Y/Z 300/150/340 mm Table Fixed angle table 600x210 mm Maximum table load: 200 kg Features • Vertical and horizontal spindle • Milling head manually swivelable +/- 90° • Z-axis bellows Options • Chip tray • Machine lamp • Universal table • Rotary table • Slotting head • Dividing head • Steady rest • etc.

Condition: like new (used), Optimill MT100 in mint condition with various tools and 3-axis digital readout X-axis travel 600 mm Y-axis travel 270 mm Z-axis travel 380 mm Vertical spindle: taper ISO 40 DIN 2080 Vertical spindle milling head rotation range X-Y plane 360° Vertical spindle milling head rotation range Z-X plane 360° Vertical spindle speed range 45 - 1600 min⁻¹ Number of vertical spindle speeds 11 Vertical spindle drawbar M16 Lodpfx Agjzrlbhjrehl Vertical spindle drive motor power normal operation 2.2 kW

Condition: good (used), Hang 150 Double-Head Riveter for Binders Manufacturer: Hang Germany Machine has been overhauled and is ready to use. The machine is used for riveting all types of ring mechanisms. Two riveting heads with adjustable spacing. Cardboard thickness: 0.2-4mm Throat depth: 310mm Head spacing: adjustable from 35-440mm Cycle time: 0.5s Lhsdpjzw Ragofx Agrsl Weight: 570kg Power supply: 380V The cycle is initiated by a foot pedal.

Condition: reconditioned (used), Year of construction: 1988, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, quill stroke: 60 mm, total height: 1,935 mm, total length: 2,000 mm, total width: 200 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 50 rpm, type of input current: three-phase, overall weight: 1,445 kg, table length: 460 mm, workpiece weight (max.): 400 kg, table load: 400 kg, table width: 800 mm, year of last overhaul: 2013, warranty duration: 6 months, The machine was completely and professionally overhauled by us in 2013. We were able to repurchase the machine from a customer who had used it very little, and we fully serviced and inspected it. Control 3-axis - Active - Digital display HEIDENHAIN TNC 113 Speed 50 - 2500 rpm, geometrically stepped direct drive with 18 speed stages for maximum torque / milling performance Feed 6.3 to 630 mm/min, steplessly adjustable Rapid Traverse 1.3 m/min Quill Extendable quill, vertical 60 mm, SK40 with M16 drawbar thread, optionally: with DECKEL - saw thread S20 x 2 Extendable quill, horizontal approx. 100 mm Axes X/Y/Z 500/400/400 mm Ljdpoyitxqofx Agrshl Table Rigid angle table 800x460 mm Equipment • Vertical and horizontal spindle • Milling head manually swivels +/- 90° • Central lubrication Options • Z-axis bellows • Chip tray • Machine lamp • Universal table • Rotary table • Slotting head • Dividing attachment • Counter-holder • etc.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, We are offering this ready-to-use Cask 3 Head Fill Station filling technology, manufactured in 2023. Number of filling heads: 3 Filling capacity: 25 cans/minute Hourly capacity: 63 cases/hour Lodpozzmfasfx Agrshl Dissolved oxygen level: 15 - 20 ppb Footprint dimensions: 7’ x 2.5’ Footprint area: 17.5 ft² If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,950 kg, maximum load weight: 15,050 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,470 mm, total width: 2,550 mm, total height: 1,080 mm, suspension: air, tire size: 445/45 R19,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis with swivel turntable Fine-grained steel welded construction Fliegl “V-Stream” frame Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with sturdy arms based on 20" dimensions for 7.15 m and 7.45 m swap bodies (Note: When used in combination with the impact guard, the guard protrudes beyond the 7.15 m swap body) Note! Not suitable for 20" containers, or only possible if the container has a tunnel or opening at the front center measuring approx. 200 mm in length and 800 mm in width! Swivel mount with heavy-duty ball bearing swivel ring Wheel chocks with holders Aluminum side impact protection Side impact protection set inward for optimal clearance to the swap body supports Steel underrun protection Underrun protection shortened for optimal clearance to the swap body supports; lighting system mounted in a protected position Quarter-shell fenders in front and half-shell fenders in the rear Includes mud flaps for fenders Large Fliegl mud flap mounted transversely on the underrun protection at the rear *Trailer coupling system (turntable) Drawbar with certified 40 mm drawbar eye *Axles + Suspension SAF disc brake axles “Laser-measured axles/chassis” reduces tire wear and fuel consumption Air suspension *Brake System 2-line compressed air brake system Color-coded lines for easy maintenance. Air reservoir capacity: 208 liters Spring-loaded parking brake 2 non-reversible coupling heads at the front, with connecting lines to the tractor unit, 24-volt EBS, electronic braking system with EBS connector at the front, with connecting cable, Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! Lhsdpfx Aozfp S Degrel with lift & lower valve + auto-reset function Axle load detection via EBS CAN bus signal, for display in the cab; the truck must be equipped accordingly “TPMS” tire pressure monitoring system according to ECE R 141, display in the towing vehicle via EBS *Wheels and tires 445/45 R19.5", brand selected by the manufacturer Steel rims, factory silver *Electrical system 24 volts, multi-chamber lights, yellow LED side lighting Yellow LED side lighting linked to the turn signals “Flashing side lights” 2 white front position lights 2 white/red rear lane-keeping lights 1 x 15-pin connector at the front, with connecting cable, additional LED work light(s) at the rear, activated via the reverse light LED work light at the front, centered between the cross members, shining toward the rear, activated via the reverse light *Country of registration/license plates Germany with DEKRA approval and certification (in accordance with §13 EG - FGV) 24/7 service hotline prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red at the rear *Chassis galvanized or painted in colour of choice

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear doors, sandwich panel construction Equipment: - Lashing rails - 6x lashing eyes - 30mm insulated wall Net price: €6,008.40 / Gross price: €7,150.00 Article number: TKC227351820.01 Technical data: • Brand: Vezeko • Model: TK C • Vehicle type: Box trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 355 x 184 x 205 cm • External dimensions (LxWxH): 521 x 237 x 267 cm • Loading height of the floor: 59 cm Ledsyivbzspfx Agrehl • Permissible total weight: 2,700 kg • Unladen weight: 775 kg • Payload: 1,925 kg • Chassis: Low-loader (wheels next to the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced, robust, bolted V-drawbar • Very stable aluminum frame • Frame is very torsion-resistant due to its robust design • Floor made of Finnish plywood • Many cross members, resulting in high point load capacity • Body made of very solid steel sheet sandwich, insulated, 30mm thick • Outer layers made of hot-dip galvanized and additionally powder-coated steel sheet • Roof made of GRP sandwich 25mm • 2-wing rear door with stainless steel locking mechanism • Continuous interior height: approx. 200cm • Continuous interior width: approx. 184cm • 2x maneuvering handles at the front • Doors with special sealing profiles made of hard/soft plastic • Rear frame made of hot-dip galvanized steel, welded • 6 lashing points embedded in the floor (750 DaN/kg) • Slot-hole lashing rail mounted on both sides, h=90cm • 100 mm impact protection around the interior • Maintenance-free rubber spring axles from ALKO • Reverse automatic • ALKO overrun device and parking brake • Plastic mudguards • 13-pole plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any special requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT. - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, operating hours: 3,000 h, SCM Accord 40 fx – CNC Machining Center for Timber Construction (Complete description available in the attachment) Used Machine, Year of Manufacture: 10/2022 Consisting of: - R21431 Accord 40 fx – Working field X-Y = 9000 x 1905 mm, Z = 350 mm, quantity: 1 - OF0158 Usable pass-through height Z = 350 mm (with H50 vacuum cups), quantity: 1 - OF0165 Traversing speed on all axes, Accord 40 fx (PRO-SPEED version), quantity: 1 - OF0168 Pendulum operation, quantity: 1 - OF0169 Automatic axis lubrication, quantity: 1 - OF0299 TELESOLVE remote maintenance via Internet, quantity: 1 - 450328 eye-M PRO operation console with integrated PC, quantity: 1 - 450291 Additional fixed operator panel, quantity: 1 - 870068 TECPAD – remote control for machine functions, quantity: 1 - 560058 No. 10 MATIC support rails, L1825, quantity: 1 - 230237 MAXI working unit – Prisma T, quantity: 1 - 870031 Chip hood on the electric spindle, adjustable, quantity: 1 - 870109 Preparation for angle gear "Prisma T-S", quantity: 1 - 470014 Air nozzle for tools, quantity: 1 - 870119 Tool length measuring device, quantity: 1 - 870016 BRC working unit, quantity: 1 - 510014 Jaw preparation H145 for worktable with 10 support rails, quantity: 1 - 480178 Front stop row H110 for worktable with 10 support rails, quantity: 1 Lodpfx Agsyzgxcorehl - 480105 Rear stop row H110 for worktable with 10 support rails, quantity: 1 - 480137 First lateral stop row H110 for worktable with 10 support rails, quantity: 1 - 480005 Vacuum cup H110 145x145 mm, quantity: 12 - 480006 Rotatable vacuum cup H110 145x55 mm, quantity: 8 - 480018 Rotatable vacuum cup H110 145x30 mm, quantity: 5 - 480049 Rotatable vacuum cup H110 200x40 mm, quantity: 5 - 480149 First lateral stop row H145 for worktable with 10 support rails, quantity: 1 - 480153 Second lateral stop row H145 for worktable with 10 support rails, quantity: 1 - 480107 Round pneumatic clamping cylinders H145, quantity: 8 - 480108 Square pneumatic clamping cylinders H145, quantity: 30 - 480111 No. 6 lifting devices with double stroke H145, quantity: 1 - 450289 Laser and reference stop H145 for arcs (left), quantity: 1 - 350016 Vacuum pump 250 (300) m³/h – 50 (60) Hz, quantity: 1 - 190046 PRO-SPEED safety system, quantity: 1 - 210057 TRC 48 – rear-side tool magazine, quantity: 1 - 210190 MACH 5 – quick-change system, quantity: 1 - 870236 RTCP setting – self-calibration system for Prisma working unit, quantity: 1 - Air conditioning for the control cabinet, quantity: 1 - 450288 Safety enclosure with vertical ON-OFF adjustment, quantity: 1 - 210852 SCM angle head HSK 63E – underfloor milling unit, quantity: 1 - OF0438 Human-machine interface software (HMI) MAESTRO ACTIVE, quantity: 1 - OF0543 Operating system Windows 10 embedded 64 bit, quantity: 1 - OF0422 Machine control interface software Maestro cnc, quantity: 1 - OF0435 Hardware dongle for Maestro cnc, quantity: 1 - 524309 Maestro 3D-Advanced module, quantity: 1 - 630359 Additional hardware dongle for Maestro cnc (for USB port), quantity: 1 - 523687 ProView simulation software, quantity: 1 - 109993 MACHINE LANGUAGE: German, quantity: 1 - SPEC01 Special design – Special Accord 9 meter processing in X - SPEC02 Special design – 2 pieces push-in double-stroke aids H145 - SPEC03 Special design – Spare spindle Maxi-Prisma-T

Condition: used, Year of construction: 2023, Control unit E-LinkPro ISObus 13 Blind blade with holder Running axle 540 rpm / gearbox Additional net roller holder Wheel chocks Press roller bearing / (regreasable) Fixed drawbar eye 40 mm / Lhsdpfstlqxqex Agrsl

Year of construction: 2000, condition: used, fuel type: electric, Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering, electric hand pallet truck -Manufacturer: Jungheinrich, drawbar completely from electric pallet truck ECE 20 year construction 2000/2001 -Individual components: see photos -Number: 2x drawbar available, 1x mod. 2000 / 1x mod. 2001 -Delivery/Price: complete per piece Lodei Aqaxjpfx Agrjhl -Dimensions: 860/500/H200 mm -Weight: 29 kg