Used Durma Hrb - 4 2013 for sale (64,275)

Condition: ready for operation (used), Year of construction: 2003, stroke length: 185 mm, overall weight: 14,050 kg, total width: 2,400 mm, total height: 2,850 mm, pressing force: 204 t, product length (max.): 5,050 mm, Press brake manufactured in 2003. This Durma HAP 40200 features a press force of 200 tons and a bending length of 4050 mm. It operates at a stroke rate of 6 strokes per minute, with a stroke length of 185 mm. If you are looking to get high-quality bending capabilities, consider the Durma HAP 40200 machine we have for sale. Contact us for further details. • Control system: Durma ENC 310 • Strokes per minute: 6/min • Maximum pressure: 295 kg/cm² (4278 psi) • Oil tank capacity: 150 L • Upper tool weight: 173 kg • Lower tool weight: 312 kg Technical Specification Bending Length 4050 mm Pgsdpfx Aezpbauoi Tju

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 7,202 h, load capacity: 4,000 kg, lifting height: 6,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,800 mm, motor manufacturer: GM 3.0, fork length: 1,200 mm, overall weight: 6,100 kg, empty load weight: 4,000 kg, total height: 3,800 mm, total length: 2,300 mm, total width: 2,200 mm, maximum load weight: 4,000 kg, fuel: liquid petroleum gas (LPG), Equipment: adjustable boom, cabin, lighting, pallet forks, sideshift, Very good condition Combilift. Mast duplex 6000 mm with free lift Sideshift Pedpfsz Dwaqjx Ai Tjgu We sell forklifts after a full service. Prepared for the end user. Ready to use. We can arrange transport within Europe and worldwide.

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 85400 € 1614.06 € 4100 mm 13 mm 8 mm 350 mm 8 1/min 1.75 ° 18 62 to 1000 mm 200 mm/s 30 kW 330 l 3 Stk. 818 mm 550 mm 4520 mm 5350 mm 2250 mm 3650 mm 2250 mm 16300 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength for economic processing Lower blade fourfold turnable Upper blade double turnable Oilfilling Light barrier on the back of the machine Qualified customer support User manual in GERMAN and ENGLISH according to CE rules Pgjdpfx Aowirynji Tsu (sample photo) WE HAVE MORE THAN 850 REFERENCES!

Condition: used, Year of construction: 2022, functionality: fully functional, overall weight: 28,250 kg, total length: 7,500 mm, total height: 3,470 mm, total width: 2,600 mm, working height: 1,100 mm, stroke length: 365 mm, type of input current: three-phase, pressing force: 320 t, input voltage: 400 V, working width: 6,000 mm, feed rate X-axis: 21 m/min, feed rate Y-axis: 8 m/min, back gauge speed R-axis: 250 mm/s, power: 37 kW (50.31 HP), oil tank capacity: 250 l, Equipment: CE marking, safety light barrier, Durma AD-R 60320 CNC press brake / panel bender For sale: a Durma AD-R 60320 CNC hydraulic press brake, manufactured in 2022. Well-maintained, fully operational, and available for inspection at our facility in Zaragoza, Spain. Pgedpfx Aez E Sm Iji Teu Manufacturer: Durmazlar (Turkey) – Serial number: 73672218668 Year of manufacture: 2022 Bending capacity: 6,050 mm x 320 tons Stroke: 365 mm Dimensions: 7,500 x 2,600 x 3,470 mm (L x W x H) Weight: 28,250 kg Motor: 37 kW, three-phase, 400V, control voltage 24V Hydraulic oil tank: 250 l CNC touchscreen control with automatic bending sequence programming Complete with a full set of Eurostamp tooling: punch 1311 (full length 6,000mm), punch 1310 “goat’s foot” (4,000mm), dies 3077/3082, and Multi-V Includes an extra gripper for parts with a minimum length of 200mm, and vacuum suction cups for part handling CE marked, photoelectric safety barrier For technical questions or to arrange a visit, please contact us by email – we will be happy to answer any question or send further photos/videos of the machine in operation.

Condition: good (used), Year of construction: 2013, operating hours: 3,450 h, fuel type: diesel, Genie S-40 telescopic boom lift 4x4 DEUTZ DIESEL 14.2m working height, 2013. A video can be sent via WhatsApp. We have a continuous stock; see our website. Pgedpjz Hnx Njfx Ai Tou Prices are ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without warranties (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Fiber laser, fiber laser cutting system with flat bed and tube laser Laser cutting machine, laser cutting system, laser machine Manufacturer: DURMA Type: HD-F III 3015 III BH-IPG 2kW Serial No.: 822817712 Year of manufacture: 2017 with IPG laser source SIEMENS SL 840D + CAD software + nesting software Working area: 3000 x 1500 mm Tube cutting device: up to Ø 400 mm Laser power: 2000 watts (fiber laser) Pgedpfxokdnv Ts Ai Tou Output power: 0.2..2 kW Wavelength: 1070..1080 nm IPG power consumption: 6.4 kW/hour - Polarization random - Collimating focal length FC 100 mm - Focusing focal length FF 150 mm - Fiber diameter in single mode 50, 100, 200, 300 µm - Max. power consumption 42 kW - Power consumption machine 20 kW - Power consumption filter 4 kW - Power consumption cooler 10+1 kW - Power consumption resonator 7 kW Mild steel sheet thickness max. 12 mm - Stainless steel sheet thickness max. 6 mm - Aluminum sheet thickness max. 6 mm - Copper sheet thickness max. 3 mm - Brass sheet thickness max. 6 mm Working area X-axis 3060 mm Working area Y-axis 1530 mm Working area Z-axis 160 mm Sheet size max. 3048 x 1524 mm Sheet weight max. 200 kg/m² - IPG fiber laser resonator (see separate document) - Water cooling unit for laser source and cutting head (see separate document) - Under-table extraction and extraction filter system (see separate document) - with 2-position shuttle table - Tube laser with 4-jaw chuck and large spindle bore next to the flat bed - Guides for tube laser on linear guides - with CAD software - with nesting software - with tube laser software very good condition

Condition: good (used), functionality: fully functional, Year of construction: 2012, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 11 A, input frequency: 50 Hz, pressing force: 55 t, type of input current: three-phase, Durma IW 55 Combination Machine (Punching and Shearing) For sale: a Durma IW 55 combination machine (punching machine + ironworker-type shear), with a capacity of 55 tons. Well-maintained, fully operational, and available for inspection at our facilities in Zaragoza, Spain. Pgjdpfoz Hla Dsx Ai Tsu Manufacturer: Durmazlar (Turkey) Type: IW 55/110 Motor: 5.5 kW, three-phase, 50Hz Operating voltage: 400V — Control voltage: 24V Current: 11.5 A — Fuse: 16A Cutting capacities: L-profile at 90° 120x120x10mm, L-profile at 45° 70x70x7mm, flat bar 300x15mm, round bar Ø40mm, square bar 40mm, punching Ø40x10mm Material capacity: up to 45 kg/mm² (65,000 psi) Includes punching and die tooling For technical inquiries or to arrange a visit, please contact us by email. Price: €6,500 (negotiable), VAT not included. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 219400 € 6 kW Wechseltisch 25 mm 15 mm 20 mm 10 mm 12 mm 4100 x 2070 mm 4100 mm 2070 mm 125 mm 4064 x 2032 mm 240 (für 3 - 12 kW) / 400 kg/m² 3900 (für 3 - 12 kW) / 64 kg 100 m/min 100 m/min 141 m/min 14 m/s² +/- 0,05 mm +/- 0,05 mm 32 s The HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment. The system consists of the following components: Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems) Encapsulated cutting room with protective glazing CNC graphic control with touchscreen Laser source Brilase Premium Cutting head with automatic focus adjustment Integrated cooling unit for cutting head and laser source CAD/CAM software Lantek for programming including autonesting Positioning laser Sheet check system (automatic detection of sheet position and dimensions) Automatic nozzle cleaning Central lubrication Slug box Working area lighting Multi-chamber suction system Light barrier protection for the changing table Remote maintenance access Air condition for electrical cabinet Equipped according to CE guidelines ALTERNATIVE LASER SOURCES: Material 6 kW 12 kW 15 kW 20 kW Mild steelS235 25 Pjdpfsx Urp Hjx Ai Togu 30 35 40 Stainless steel(304) 15 25 35 40 Aluminium (5083) 20 30 35 40 Copper 10 15 15 15 Brass(CuZn39 Pb3) 12 20 20 20 OPTIONS: Suction unit with filter Sheet handling systems Automatic nozzle change

Condition: ready for operation (used), Year of construction: 2008, stroke length: 180 mm, throat depth: 335 mm, power: 11 kW (14.96 HP), Equipment: CE marking, Hydraulic press brake Manufacturer: DURMA, Type: E-30120 Year of manufacture: 2008 Technical data: Manufacturer: Durma Type: E-30120 Year of manufacture: 2008 Press force: 120t Working length: 3050 mm Pgjdpfx Aiozbixks Teu Stroke of upper beam: 180 mm Throat depth: 335 mm Distance between uprights: 2550 mm Dimensions: approx. 3.25 x 2 x 2.65 m Connected power: 11 kW Weight: approx. 7,400 kg Equipment: • Amada tool clamping system • Durma DU 6000 control system • Sick C-4000 safety device • CNC-controlled crowning • Controlled axes: Y1, Y2, X • R axis + Z axes manually adjustable • 2 support arms, laterally adjustable • Tool package Upper die, straight, segmented approx. 3300 mm, R0.8 75° Upper die, bent, approx. 3300 mm segmented Lower die, 4-way block: V16, V20, V35, V50 All information without guarantee. The machine comes from the workshop of a Hamburg film studio. A demonstration with power supply is possible at any time.

Condition: excellent (used), Year of construction: 2013, load capacity: 340 kg, arm reach: 2,800 mm, controller manufacturer: ABB, controller model: IRC5, IRB 7600 is ideal for heavy applications, regardless of industry. Typical uses include handling heavy fixtures and parts, turning car bodies, lifting engines, in foundries or forges, and loading and unloading machine cells. It can also be used to lift large, heavy pallet layers. Characteristics such as high available torque and inertia capability, rigid design, and powerful acceleration have earned this market leader its “Power Robot” title. Year: 2013 (bulk buying discounts available) Condition: Used Cabinet: IRC5 Included Teach Pendant: Included Signalling & Power Cables: Included Podow Nanrepfx Ai Tegu Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands.

Condition: good (used), Year of construction: 2013, Machine Summary Compact, proven digital plate imager for label & narrow-web plate facilities. Handles a wide range of materials (digital flexo, chemistry-free films, digital letterpress on film/metal base, and screen) in the popular 24″×20″ (609×508 mm) format. Equipped with EasyClamp for quick, convenient loading onto the vacuum drum. Technical Data (from seller’s dossier) • Model: Esko CDI Spark 2420 — Optics 7.5 • Maximum plate size: 609 × 508 mm (24″ × 20″) • Power supply: 220–240 V, 1/N/PE, 6 A, 50/60 Hz • Machine dimensions (W×D×H): 1160 × 700 × 1050 mm | Weight: ~320 kg • Serial number: 107199 | Year of manufacture: 2013 Pgjdpfjw Tc Tfsx Ai Tou • Equipment/Features: EasyClamp vacuum drum loading Condition & Viewing • From a company closure; machines were in active use until closure and can be demonstrated in operation by arrangement.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, load capacity: 4,000 kg, Equipment: documentation/manual, Sideros Syncrolift Column Lifting and Rotating Device, 4000 kg load capacity, like new condition. Minimum height: 450 mm Maximum height: 1950 mm Pgodpfsyrz Hnex Ai Tsu Travel: 1500 mm Diameter of clamping disc: 800 mm Overall height: 2505 mm Total weight: 1300 kg Torque: 5500 N/m Speed: 0.75 RPM.

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 62500 € 1181.25 € 40 to 1250 mm Y1 / Y2 / X und R Achse 200 mm 1050 mm 250 mm 440 mm servomotorischer Spindela 115 mm/s 10 mm/s 115 mm/s Pjdjynm Ayspfx Ai Togu 650 mm 250 mm 1000 mm 7.2 kW 1950 mm 1450 mm 2650 mm 3600 kg servomotorized spindle drive 4 axes (Y1, Y2, X and R) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5“ in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows - IGES, STEP, DXF files import servo motorized back gauge on linear guides and ball screws quick release upper tool clamping upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules users manual in English or German ADVANTAGES OF THIS CONCEPT: - higher productivity as classic hydraulic press brakes, by nearlyinstantaneously reaction on foot pedal signal -low energy consumption - compact motor-spindle unit with small amount of components -no hydraulic components OPTIONAL EQUIPMENT (PRICES ON REQUEST): Z1/Z2-axes CNC control DELEM DA-66S or DA-69S

Year of construction: 2024, condition: new, Manufacturer: DURMA Model: MS 3004 Year of manufacture: 2024 Cutting length: 3100 mm Sheet thickness: 4 mm Control system: EZM9910 Operating hours: 0 Cutting angle: 1°30 Strokes per minute: 42 Motor power: 7.5 kW Rear gauge range: 750 mm Table width: 450 mm Table height: 800 mm Dimensions L/W/H: 3700x2300x1350 mm Weight: 3780 kg Standard equipment Control unit EZM9910 Rear gauge range 750 mm, programmable via control unit Plastic inserts for the hold-down device 1 side gauge and 2 sheet support arms Finger guard Portable foot switch with emergency stop Spring-loaded flap stop in the T-slot of the support arms Ball screw Ikh7877 Table plates with ball rollers Upper blade with 2 cutting edges Lower blade with 4 cutting edges CE marking Extended equipment Adjustable angle stop 0-180° The machine can be inspected and demonstrated at any time in our demonstration center in Staufenberg, by prior appointment. Pedpod R Emfjfx Ai Togu Other machines are available for demonstration at our location in Staufenberg. Upon request, we will gladly provide you with further information.

Condition: new, Year of construction: 2024, Everything can be configured according to your requirements, with very short production and delivery times. Pjdpfxefin N Se Ai Togu Upon request, we will gladly provide you with further information. Technical specifications available upon request. AD-R 80400 Bending force: 400 tons Bending length: 8050 mm With over 60 years of experience in the research and production of machines for sheet metal processing, and with 8,000 machines produced annually in three technologically advanced manufacturing facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned producers in their industry, with products distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing competent advice and support when it comes to sheet metal processing machines. Our demonstration center gives you the opportunity to gain an overview of our machines on-site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our task is to be your direct point of contact on-site and to offer you services related to training and customer support. We would be happy to support you from Germany – from consulting to purchase and throughout the entire life cycle of your machine. With our German branch, we are always on-site to respond quickly and efficiently when you need us. Here, we are your reliable partner for technologically advanced solutions in sheet metal processing.

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 65200 € 1232.28 € 40 to 2050 mm Y1 / Y2 / X und R Achse 200 mm 1700 mm 350 mm 440 mm servomotorischer Spindela 180 mm/s 10 mm/s 115 mm/s 650 mm 250 mm 1000 mm 7.2 kW 2600 mm 1450 mm 2650 mm 4400 kg servomotorized spindle drive 4 axes (Y1, Y2, X and R) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5“ in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows - IGES, STEP, DXF files import servo motorized back gauge on linear guides and ball screws quick release upper tool clamping upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules users manual in English or German ADVANTAGES OF THIS CONCEPT: - higher productivity as classic hydraulic press brakes, by nearlyinstantaneously reaction on foot pedal signal -low energy consumption - compact motor-spindle unit with small amount of components -no hydraulic components OPTIONAL EQUIPMENT (PRICES ON REQUEST): Pgodpfx Aeynm A Hei Tsu Z1/Z2-axes CNC control DELEM DA-66S or DA-69S

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 30 h, Equipment: centralized greasing system, dust extraction, emergency stop, fume extraction, safety light barrier, Tube Laser Cutting System Ideal for Entry-Level Applications. Simplicity meets efficiency with the Durma HD-TC COMPACT 60250 entry-level tube laser. Perfect for workshops, metal fabricators, and others looking to step into tube laser processing, this laser offers straightforward operation, reliable performance, and excellent value for money. Discover how the Durma HD-TC COMPACT 60250 can enhance your production with precise cuts and user-friendly technology, adding value to your operation. 3 kW Laser Power Maximum Sheet Thicknesses: - Mild Steel: 12 mm - Stainless Steel: 6 mm - Aluminium: 6 mm - Copper: 3 mm - Brass: 6 mm Capacity: - Maximum Tube Diameter: Ø250 mm - Maximum Square Profile Dimensions: 160x160 mm - Maximum Rectangular Profile Dimensions: 200x150 mm - Minimum Tube Diameter: 16 mm - Maximum Material Length: 6000 mm - Minimum Remnant Length: 65 mm - Unloading Length: 3000 mm - Semi-automatic unloading unit: optional (6m) - Maximum Material Weight: 58 kg/m - Maximum Total Workpiece Weight: 350 kg - Profile types that can be cut: Round, square, rectangular, elliptical Psdperkntcsfx Ai Tjgu - Open profile types that can be cut: I, C, L - Maximum open profile dimensions: 240x240 mm Dynamics: - X-Axis: 40 m/min - Y-Axis: 94 m/min - Z-Axis: 30 m/min - A-Axis: 510 °/s Accuracy: - Positioning Accuracy: ±0.2 mm - Positioning Variation: ±0.05 mm - Tube Center Detection with Capacitive Sensor: Yes Additional Available Configurable Options. LASER POWER: - Upgrade to DURMA LASER SOURCE BRILASE 4 kW ADVANCED fiber laser source (incl. chiller) + Durma cutting head - Upgrade to DURMA LASER SOURCE BRILASE 6 kW ADVANCED fiber laser source (incl. chiller) + Durma cutting head OPTIONS: - Air filtration system (40 bar N₂ + 16 bar O₂ + 16 bar Air) - Air filtration system (40 bar N₂ + 16 bar O₂ + 40 bar Air) - CNC oscillating head (+/- 45°) - Semi-automatic front loading system - Unloading table (6m) with conveyor - Unloading table (3m) with conveyor - Additional dongle software - Transformer 220, 440, 575V SOFTWARE OPTIONS: - Durma Cloud License + D-Mobile + Smart Watch - STEP file importer

Year of construction: 2024, condition: new, Everything can be configured to your specifications, with very short production and delivery times. Upon request, we will be happy to provide you with further information. Pgsdsfin Hwspfx Ai Tou Technical data: AD-R 60400 Bending force: 400 tons Bending length: 6050 mm Distance between uprights: 5100 mm Stroke: 365 mm Installed height: 630 mm Throat depth: 510 mm Optional throat depth: 750 mm | 1000 mm | 1250 mm Table height: 1220 mm Table width: 154 mm Y-axis rapid traverse: 120 mm/sec. Y-axis working speed: 8 mm/sec. Y-axis return speed: 100 mm/sec. X-axis working speed: 250 mm/sec. R-axis working speed: 140 mm/sec. R-axis travel: 250 Motor power: 37 kW Length: 7500 mm Width: 2110 mm Height: 3710 mm Weight approx. 35 tons With over 60 years of experience in the research and production of machines for sheet metal processing, and with 8,000 machines produced annually in three technologically advanced manufacturing facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned manufacturers in their industry, with products distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing you with competent advice and support when it comes to sheet metal processing machines. Our demonstration center offers you the opportunity to gain an overview of our machines on-site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our task is to be your direct point of contact on-site and to offer you services related to training and customer support. We would now like to support you from Germany – from consulting, through purchasing, and throughout the entire life cycle of your machine. With our German branch, we are always there for you locally, so that we can react quickly and efficiently. Here, we are your reliable partner for technologically advanced solutions in sheet metal processing.

Condition: new, Year of construction: 2024, Bending force: 320 t Year of manufacture: 2024 (New) Control system: DT 15 Bending length: 4050 mm Distance between columns: 3600 mm Y rapid traverse speed: 100 mm/s Y working speed: 10 mm/s Y return speed: 100 mm/s Motorized crowning Table length: 630 mm Table width: 154 mm Table height: 900 mm Stroke: 365 mm Overhang: 450 mm 2 support arms 2 rear stop fingers Travel speed X-axis: 350 mm/s Travel in X-axis: 750 mm Travel speed in R-axis: (max.) 300 mm/s Travel in R-axis: 250 mm Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminum) D-BEND software for 3D bending simulation and alignment Manual crowning R-axis, manual Podpfx Aijff Hvlj Tegu Motorized rear stop with linear guide and ball screw Rear stop finger with height adjustment (R-axis, manual) CE upper tool clamping system Front support arms for sheets, sliding (with T-slot and stops) Hydraulic blocks and valves in special design, in accordance with globally applicable standards Electrical equipment, in accordance with globally applicable standards Option: CE certified Motorized crowning and X & R rear stop Motor power 37 kW Oil tank capacity 250 liters Length 5300 mm Width 1910 mm Height 3230 mm Weight approx. 20000 kg

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 154500 € 2920.05 € 3 kW 12 mm 6 mm 6 mm 3 mm 6 mm 26,5 kW 250 mm 16 mm 160 x 160 mm 200 x 150 mm 6000 mm 58 kg/m +/- 0,2 mm +/- 0,05 mm rund, quadratisch, rechte 40 m/min 94 m/min Podpowiqr Aofx Ai Tegu 30 m/min 510 °/s The machine consists of the following components: - Encapsulated cutting room with protective glazing - CNC graphic control with touchscreen - Laser source Brilase 3 kW Premium incl. chiller - Cutting head with automatic focus adjustment - manual loading -manual unloading table 3 m - Positioning laser - Central lubrication - slug car - CAD/CAM software with autonesting - Work area lighting PRICE FCA TÜRKIYE OPTIONS: Suction unit with filters Semi-automatic loading system Manual unloading table 6 m with conveyer Durma cloud license Lasersources with 4 or 6 kW on request

Condition: used, Year of construction: 2013, operating hours: 4,149 h, Equipment: all wheel drive, * Includes pallet forks * Includes loading bucket, 0.85 m³ * Enclosed cabin Pgjdpfx Aio Aftbas Tou * 45 kW diesel engine * Vehicle number 12642 * Subject to errors and prior sale

Condition: excellent (used), operating hours: 346 h, lifting height: 7,900 mm, fuel type: electric, General information Year of manufacture: 2013 Year of construction: 2013 Technical information Drive: Wheel GVW: 2.469 kg Dimensions (LxBxH): 241 x 115 x 226 cm Functional Lifting capacity: 454 kg Working height: 990 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Psdpfx Ajzunyxsi Togu Additional information Please contact Ton for more information Manufacturer: Genie Type: GS2646 Year of manufacturing: 2013 Weight: 2.469 KG Hourmeter: 346 Drive: Elektrisch Product number: 26039 Platform height: 7,9 meter Working height: 9,9 meter Platform measurements: 226x115 cm Maximum outreach: Extendable platform: 91 cm Total measurements LxWxH: 241x115x226 cm Max. platform load: 454 KG Machine is technically in good condition. Fitted with good batteries. Documents incl. CE. Price: € 5.450,- excl. VAT, available from our warehouse in Hedel, The Netherlands. Delivery/transport is possible, ask for price. Keywords: Hoogwerker Schaarlift Schaarhoogwerker Telescoophoogwerker Knikarmhoogwerker Genie JLG Haulotte Skyjack Upright Manitou Hinowa Niftylift Aichi Snorkel Omme Scissorlift Boomlift Articulated Platform Arbeitsbühnen Scherenbühne

Condition: used, Year of construction: 2015, gebraucht 2015 Psdjz Drbcepfx Ai Togu 090243 prompt, Zwischenverkauf v Türkei 21800 € 1 3100 mm 6 mm 4 mm 15 1/min 1.5 ° 1000 mm 15 kW 200 l 4110 mm 2200 mm 3790 mm 2100 mm 7300 kg WITH PNEUMATIC SHEET SUPPORT Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength for economic processing Lower blade fourfold turnable Upper blade double turnable Oilfilling Light barrier on the back of the machine Qualified customer support User manual in GERMANwith EC declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 56100 € 1060.29 € 4100 mm 6 mm 4 mm 50 mm 12 1/min 1.5 ° 20 17 to 1000 mm 200 mm/s 15 kW 200 l 3 Stk. Pjdpfx Aiswiqw Ss Tegu 865 mm 580 mm 4510 mm 5230 mm 2300 mm 3600 mm 2150 mm 11460 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength for economic processing Lower blade fourfold turnable Upper blade double turnable Oilfilling Light barrier on the back of the machine Qualified customer support User manual in GERMAN and ENGLISH according to CE rules (sample photo) WE HAVE MORE THAN 850 REFERENCES!

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, laser power: 2,000 W, Traverse paths: X-axis (mm) 3060 Y-axis (mm) 1530 Pgjdozzw Irjpfx Ai Tju Z-axis (mm) 160 Max. Sheet dimensions (mm) 3048×1524 Control: Sinumerik 840D SL Laser power: 2000W Max. sheet thickness: Steel 12 mm Stainless steel 6 mm Aluminium (AlMg3) 6 mm Copper 3 mm Brass 3 mm With loading and unloading system for the sheets