Used Elotech 12-Zone Hot Runner Controller for sale (59,767)

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 2 kg, Hello, We have Unitronics controllers that are brand new, packed in their original boxes, and have never been installed. These are surplus stock items. Product Description Details Attachments Delivery Vision700 OPLC – PLC controller with 7.0'' color graphic and text HMI panel - 7-inch color touchscreen panel - Reliable controller for any industrial equipment - Complies with international standards - Designed for operation in industrial environments - Built-in SD card slot (supports 1 GB to 32 GB) - Integrated Ethernet port - Integrated RS232/485 port and miniUSB General Power supply: 12 or 24VDC Battery: Lifespan of 7 years at 25°C Nlodoycfxiepfx Ac Uef Memory: 2MB for the ladder program, 60MB for images, 1MB for fonts Ladder program capacity: 8192 coils, 4096 registers, 512 long integers (32 bit), 256 double words (32 bit unsigned), 64 floats, 384 timers (32 bit), 32 counters, additionally: 1024 X-bits, 512 X-integers, 255 X-long integers, 64 X-double words Data table: 120KB dynamic data, 256KB ROM data (read-only) Ports: 1x RS232/485, 1x miniUSB, 1x Ethernet Inputs/outputs: none Protection rating: IP66/NEMA4X (front panel) Operator panel Type: TFT LCD, 65,536 colors Resolution: 800x480 pixels, 7.0" touchscreen

Condition: used, mileage: 24,691 km, power: 177 kW (240.65 HP), first registration: 04/1994, fuel type: diesel, overall weight: 12,000 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, total width: 2,500 mm, total height: 3,200 mm, Year of construction: 1994, Equipment: ABS, all wheel drive, compressor, parking heater, Mercedes-Benz 1124AF 4x4 all-wheel drive fire engine LF16/12 according to DIN 14530, 177 kW/240 hp with 9 seats and auxiliary heating First registered: 04/1994 Mileage: 24,691 km Nlsdewawdgspfx Ac Usf ----* 6-cylinder OM 366 LA engine with 240 hp. * 6-speed manual transmission with low gear ratio * 2x differential locks (longitudinal and transverse) * ABS (deactivated via push button) * Warm air auxiliary heating * 90 km/h according to the documents * Compressed air connection for external filling of the brake system * Crew cabin with 9 seats, all with seat belts, including 2 emergency seats * Unladen weight: 7,610 kg. * Gross vehicle weight: 12,000 kg. * Small tow bar with 2000 kg towing capacity * Rotating beacons * Searchlights * 9R22.5 tires in good condition * Wheelbase: 3640 mm * Overall vehicle length: 7300 mm * LF 16/12 fire engine with mast body * 1270-liter fire water tank * Rosenbauer FP 16/8 centrifugal fire pump * Storage for generator in body * 1 spare wheel * Roof storage compartments for ladders and hoses ----TÜV valid until 11/2025 Good technical and visual condition, ready to drive and use immediately! Full service history! Perfect off-road base vehicle for a robust camper/expedition vehicle or other all-wheel drive vehicle applications. Subject to errors and changes!

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 10,407 h, load capacity: 4,000 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: simplex, construction height: 3,100 mm, drive type: Diesel, Side loader ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Nljdpozvi Nqofx Ac Ujf Technical condition: good Heating, full cabin

Condition: used, mileage: 19,393 km, power: 191 kW (259.69 HP), first registration: 09/1997, fuel type: diesel, overall weight: 14,000 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, emission class: euro2, total width: 2,400 mm, total height: 3,260 mm, Year of construction: 1997, Equipment: ABS, compressor, MAN 15.264 Silent with METZ DLK 23-12 PLC III turntable ladder in immediately operational condition! ----First registration: 26.09.1997 Mileage: 19,393 km Nodpfxowlxbds Ac Uelf Operating hours: 1,170 h Chassis equipment: * Leaf/leaf spring suspension * Wheelbase 4325 mm * Permissible total weight 15 t * 8-speed manual transmission EATON * Fuel tank 127L rear * Adjustable steering wheel * Axle ratio i = 4.11 * Differential lock on rear axle * Medium-length driver's cab * Driver comfort seat with lumbar support - Make: GRAMMER * Front passenger bench, Make: GRAMMER * Exhaust tailpipe for fire department use * Engine brake * Anti-lock braking system (ABS) * Traction control (ASR) * Disc brakes for front axle (new brake discs and pads!) * Armrests on both doors * Heated driver's seat * Additional headlights and fog lights * Operating hour counter * Headrest for driver * 2 headrests for front passenger * Rear cab wall with 2 narrow windows, left and right * Heated and electrically adjustable rearview mirrors * Right side wide-angle mirror, heated * Right side kerb mirror, heated * Reversing camera Turntable ladder superstructure equipment: * Superstructure: Metz turntable ladder DLK 23-12 PLC III with rescue cage (rescue height approx. 30.75m). Max. elevation angle: 75 degrees, max. cage load: 270kg, rated rescue height: 23m, rated outreach: 12m, stabilizers: horizontal-vertical, stabilizer width adjustable between 2400mm and 4500mm * Complete service booklet available, all maintenance carried out annually * Front blue warning beacons and rear blue lights ----Immediately operational vehicle in well-maintained condition! Non-smoking vehicle - in good condition inside and out! Your contact person for this vehicle: ---- Daniel Seidler Tel: Mobile: also WhatsApp Email: Subject to changes, prior sale, and errors!

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 18,985 h, load capacity: 7,000 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: simplex, construction height: 3,320 mm, drive type: Diesel, Side loader Nljdpjzvtu Djfx Ac Uef ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Description: Pantograph Heater, full cabin

Year of construction: 2018, condition: as good as new (ex-display), GHIBLI DHR 8 is the standalone system for thermal weeding: the 100% ecological solution against weeds thanks to the action of high temperature saturated steam. Thermal weeding has many advantages for the environment and health as: Nljdpfx Aog A Rhkjc Uef • it uses only water • it is safe, even in close proximity to sensitive places such as kindergartens, schools, hospitals. • its use does not require prior notification under the legislation in the field; • it is safe for exposed workers, people and animals, during and after the treatments;

Condition: used, Year of construction: 2000, machine/vehicle number: 990101, total length: 6,400 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 18,500 kg, Heavy Duty Lathe Seiger SLZ 1200 x 3000 with Siemens Sinumerik 810D Cycle Control (Teach-In) The heavy duty lathe Seiger SLZ 1200 x 3000 is equipped with a Siemens Sinumerik 810D cycle control (Teach-In). The machine was most recently used as a faceplate and frontal lathe and therefore operated without a tailstock and without steady rests. However, the machine can still be structurally equipped with appropriate steady rests or a tailstock and used for classic center work. Configuration with AC main drive, large faceplate, hydraulic unit, separate control cabinet, and 2 chip conveyors. Working Area Distance between centers: 3,000 mm Swing diameter over bed: 1,200 mm Swing diameter over cross slide: 850 mm Cross slide travel: 620 mm Bed width: 750 mm Spindle Spindle nose: DIN 55027 size 11 Spindle diameter front bearing: 190 mm Spindle bore: 104 mm Speed range: 5 – 900 min⁻¹ Max. torque: 6,000 Nm Main Drive Drive power: 37 / 52 kW (100% / 60% duty cycle) Nledpozdd E Rsfx Ac Ujf Feed X-axis feed force: 24,000 N Z-axis feed force: 16,000 N Rapid traverse X: 7 m/min Rapid traverse Z: 4 m/min Tool Holder Turning tool cross-section: 40 × 40 mm Electrical Data Supply voltage: 400 V Frequency: 50 Hz Max. current consumption: 200 A Workpiece Weights (Manufacturer specifications for standard configuration) Between centers without steady rest: 5,000 kg Between centers with 1 steady rest: 6,000 kg Between centers with 2 steady rests: 7,000 kg Flying in faceplate: 1,800 kg Chip Conveyor 2 x AME Chip Conveyors Manufacturer: AME GmbH, Emsdetten Type: S8 300 Tlg. 63 Year of manufacture: 05/2016 Not Included: Tailstock Steady rests Note The machine was most recently used as a faceplate or frontal lathe. Therefore, neither a tailstock nor steady rests are currently available. The machine is particularly suitable for machining large disc, ring, and flange workpieces. A later retrofit for use between centers is fundamentally possible. Serial number: 990101 Tip width: 3000 - mm Turning diameter max.: 850 mm Control: • Siemens Sinumerik 810D Weight approx.: 18,500 kg Dimensions (LxWxH) approx.: 6400 x 2200 x 2300 mm Year of construction: 2,000 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: No

Condition: used, Year of construction: 2013, controller manufacturer: Siemens, controller model: 840 D, _____ Description: Year of manuf. : 2013 Control : Siemens 840 D Rotary-Indexing-table/Spindle: Clamping stations:12 motorised spindles Drive:Torque drive, water-cooled Position measuring system:Direct Switching time:1.5 seconds Spindles:Water-cooled motor spindles C-axes:0.001°, hydraulic clamping Speed:5,500 rpm Power:11 kW Clamping device:Chuck Basic modules: Technology:Positioning module, 3-axis X-axis:50 mm Y-axis:100 mm Z-axis:100 mm Position measuring systems:Direct in all axes Coolant supply:Integrated : : Workpiece size (max.):100 x 100 x 100 mm Nsdpjzvt Ikofx Ac Uelf Station 1: Horizontal:feeding of raw parts (indexing conveyor + Stäubli robot) Vertical:Measuring raw part Station 2: Horizontal:4-fold turret without drive Vertical:Measuring reclamping error (C-axis zeroing) Station 3: Horizontal:4-fold turret without drive Vertical:Not used Station 4: Horizontal:4-fold turret without drive Vertical:Not used Station 5: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:6-position turret with WAN 10,000 rpm Station 6: Horizontal:4-fold turret without drive Vertical:Not used Station 7: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:Not used Station 8: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:Not used Station 9: Horizontal:4-fold turret without drive Vertical:Not used Station 10: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:Not used Station 11: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:6-position turret with WAN 10,000 rpm Station 12: Horizontal:Charging/discharging unit with double swivelling gripper + discharging belt Equipment: Chipmanagement:Chip conveyor High preassure unit:Cooling unit 50 bar Toolmonitoring:Toolbreaktagecontrol ARTIS Rawmaterialfeed:Conveyorbelt with robot Finishpartremoval:Conveyor with 3-way switch Oilmistseparation:Electrostatic filter Fire extraction system:Kraft + Bauer Part labelling:Laser Parts cleaning:HESO cleaning system

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 193 h, load capacity: 227 kg, empty load weight: 763 kg, construction height: 1,780 mm, fuel type: electric, total length: 1,350 mm, drive type: Elektro, construction width: 750 mm, working height: 5,450 mm, Special aerial work platform Speed class: 4 Technical condition: good Description: The Genie GR-12 is a compact and maneuverable aerial work platform for working at height indoors and in confined spaces. With a working height of up to 5.45 m, its narrow design, and emission-free electric drive, this unit is ideal for maintenance, assembly, and installation work in halls, schools, shopping centers, or storage areas. It easily passes through doors, elevators, and narrow work areas. For more information and a non-binding inquiry, please visit our website – Safe working at any height. In addition to this unit, we offer aerial work platforms and telehandlers for rent and sale. Our equipment is regularly serviced and inspected. Rental, sales, service & repair. You can get everything from a single source with us. Lease-to-own, financing, and the purchase of used equipment are also possible. Our team will be happy to provide you with competent and personalized advice. Nlodpfoyafb Eex Ac Ujf

Condition: ready for operation (used), Year of construction: 1992, X-axis: 3000mm, y-axis: 1200mm, z-axis: 1500mm, touch probe: PH10, probing system: TP 20mm, probe diameter: 4mm, probe length: 25mm, completely overhauled in 2018. An on-site inspection is possible. With documentation. Nodpfjxt Rlusx Ac Uslf

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, For sale: MAHLO Qualiscan QMS / WebPro M industrial measuring and quality control system, manufactured in 2020. The system is designed for continuous measurement and quality monitoring of web materials in industrial production processes. Technical data: Manufacturer: MAHLO GmbH + Co. KG Type / Model: QMS WebPro M Year of manufacture: 07/2020 Serial / factory no.: 01010134 / 013673 Power supply: 230 V, 1L/N/PE Frequency: 50/60 Hz Protection class: IP43 Made in Germany Njdpfszuc Uwex Ac Uslf Equipment included / visible MAHLO WebPro M measuring frame Traversing measuring system Measuring heads / sensors TEXTEST FX 3500-X20 sensor Electrical control cabinet Large HMI operator panel Control system Pneumatic components Cabling and installation components The system comes from a professional industrial production facility. The machine is offered as a complete system as shown in the photos. Condition: Used (for very short time, hence like brand new), visually in very good condition. Additional photos and technical information are available upon request. Please contact us for further information.

Condition: used, Year of construction: 2016, - Brand: Niftylift - Type : 120TAC - Year of construction: 2016 - Hours: No hour counter - Weight: 1430 kg. - Working height: 12.2 m. - Lateral reach: 6.1 m. - Drive: 220 volt - Safety inspection possible - Aerial work platform book available - CE document available - From 1st owner - Belgian registration, NL plate possible - Video on our website Nljdpfx Acozt Syyj Usf - Trade-in and transport possible * Brand: Niftylift * Hours: No hours counter *Type: 120TAC * Construction year: 2016 Aerial work platform book: Yes * Weight: 1430 kg. * Working height: 12.2 m. Lateral reach: 6.1 m. * Drive: 220 volts CE document: Yes Video on website: Yes

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/2019, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 40 %, wheelbase: 8,790 mm, color: other, Year of construction: 2019, Equipment: ABS, = Additional options and accessories = - BPW Axles - Disc brakes = More information = Axle configuration Tyre size: 385/65 Make axles: SAF Brakes: disc brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile: 40% Rear axle 2: Max. axle load: 9000 kg Nlodozudwyjpfx Ac Uef Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 3.940 kg Carrying capacity: 38.060 kg GVW: 42.000 kg Maintenance APK (MOT): tested until 12/2026 Identification Registration number: OR-36-ZF

Condition: ready for operation (used), Fanuc A06B-0128-B175 AC servo motor, serial number: C989C3562, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nlodpfx Aszt Uv Rsc Uef

Year of construction: 2021, condition: good (used), functionality: fully functional, The temperature control unit GWK (Technotrans) is for sale. The unit has a new pump installed. Medium: Water Operating temperature: 180 degrees Celsius Heating capacity: 9 kW Nlsdpfxszul Tpo Ac Ujf Cooling capacity: 40 kW

Condition: used, axle configuration: 2 axles, first registration: 03/2001, loading space length: 13,620 mm, loading space width: 2,500 mm, loading space height: 2,600 mm, total length: 13,780 mm, total width: 2,550 mm, total height: 4,000 mm, tire size: 385/65R22.5, tire condition: 40 %, color: white, Year of construction: 2001, Tire size: 385/65R22.5 Rear axle 1: Tire tread: 40%; Reduction: single reduction Rear axle 2: Tire tread: 50%; Reduction: single reduction Unladen weight: 7,400 kg Payload: 24,600 kg GVWR: 32,000 kg Body brand: OTHER Damage: none = Company Information = Nsdpfxozullxj Ac Ujlf Heisterkamp Used Trucks BV doesn't just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are ready for immediate use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today's requirements, and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Phone: - Email: - Website:

Condition: excellent (used), Huber Unichiller 020Tw-H Recirculating Chiller / Thermostat Manufacturer: Peter Huber Kältemaschinenbau Model: Unichiller 020Tw-H Type: UC020Tw-H Temperature range: -20 to +100 °C Device type: Water-cooled recirculating chiller / thermostat For sale is a used Huber Unichiller 020Tw-H with Pilot ONE touchscreen control. The thermostat is designed for externally closed temperature control circuits and is suitable for precise cooling and temperature control of machines, industrial plants, test benches, laboratory applications, and process circuits. Technical data: Temperature range: -20 to +100 °C Temperature control / display: 5.7" color touchscreen Controller: Huber Pilot ONE Internal temperature sensor: Pt100 Connection for external sensor: Pt100 Temperature stability at -10 °C: 0.2 K Heating capacity: 2 kW Cooling capacity at +15 °C: 2 kW Cooling capacity at 0 °C: 2 kW Cooling capacity at -10 °C: 1.5 kW Cooling capacity at -20 °C: 0.8 kW Circulation pump: Type B Max. flow rate: 25 l/min Max. delivery pressure: 3 bar Flow rate at 0.33 bar: 22 l/min Flow rate at 0.5 bar: 20 l/min Flow rate at 1.0 bar: 17 l/min Flow rate at 2.0 bar: 10 l/min Flow rate at 3.0 bar: 5 l/min Pump connection: G3/4 male Cooling water connection: G1/2 male Min. cooling water differential pressure: 1 bar Max. cooling water pressure: 6 bar Min. filling volume: 2.5 l Expansion volume: 4 l Refrigeration unit: water-cooled Refrigerant according to nameplate: R507 Refrigerant quantity according to nameplate: 0.57 kg Max. operating pressure according to nameplate: 25 bar Nodozukkgopfx Ac Uolf Power connection: 230 V / 1~ / 50 Hz Max. current consumption according to nameplate: 15.5 A Protection class: IP20 Sound pressure level: approx. 60 dB(A) Dimensions: Width: approx. 400 mm Depth: approx. 440 mm Height: approx. 1230 mm Weight: approx. 141 kg Equipment: Huber Pilot ONE 5.7" color touchscreen Water-cooled refrigeration unit Stainless steel circulation pump Atmospherically open expansion tank Digital level indicator Adjustable over-temperature protection according to DIN 12876 USB interface Ethernet interface RS232 interface Connection for external Pt100 sensor Main switch Mobile stainless steel housing Accessories according to pictures Shipping data: Machine weight: approx. 141 kg Machine dimensions: approx. 400 × 440 × 1230 mm (W × D × H) Shipping by freight forwarder possible. Condition: Used Optical condition according to pictures Scope of delivery: 1 × Huber Unichiller 020Tw-H recirculating chiller / thermostat Accessories according to pictures The unit is available for immediate delivery. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: excellent (used), Huber Unichiller UC055Tw spec. – water-cooled recirculating chiller Manufacturer: Peter Huber Kältemaschinenbau GmbH Model: Unichiller 055Tw spec. Type: UC055Tw spec. Machine type: Recirculating chiller / temperature control unit / process chiller Temperature range: -10 to +40 °C Offered is a used Huber Unichiller UC055Tw spec. with a water-cooled refrigeration unit. The unit is designed for temperature control and process cooling of external closed circuits. Operation is via the Huber Compatible Control system. Technical data: Temperature range: -10 to +40 °C Power connection: 400 V / 3~ N / 50 Hz Current consumption: max. 7 A Refrigerant: R507 Refrigerant charge: 1.07 kg Max. pressure: 25 bar Refrigeration unit: water-cooled CFC- and HCFC-free The UC055Tw series is designed as a recirculating chiller for an external closed temperature control circuit. The unit in question is a special version, “UC055Tw spec.” Dimensions: Width: approx. 600 mm Depth: approx. 600 mm Height: approx. 1,450 mm Weight: approx. 168 kg Equipment: Huber Compatible Control temperature control Digital display Connections for external temperature control circuit Cooling water connections Drain and residual drain Interfaces on the unit Main switch Stainless steel housing Transport rollers Lifting eyes Shipping data: Due to its size and weight, transport is preferably by freight forwarder. Dimensions of the unit: approx. 600 x 600 x 1,450 mm Weight of the unit: approx. 168 kg Nlodpfxszui U Rs Ac Uef Condition: Used condition with signs of wear and tear consistent with age and use. The exact optical condition can be seen in the pictures. Scope of supply: 1x Huber Unichiller UC055Tw spec. Connection/cooling water hoses as shown in the pictures Scope of supply as shown in the pictures The machine is available by arrangement. The scope of supply is as shown in the pictures. Subject to change, errors and prior sale.

Year of construction: 1998, condition: used, x-travel // mm y-travel / mm Nledpfxeig A Ers Ac Uof z-travel // mm total power requirement / kW weight of the machine ca. 950 KG

Condition: not inspected (used), - Siemens 3SE5 122-0CB01 (1 piece) - Telemecanique XC2-JC IEC337-1 NFC63140 (1 piece) - Telemecanique XCKM EN/IEC60947-5-1 (7 pieces) - Telemecanique XCK-M IEC947.5.1 EN60 947.5.1 (3 pieces) - Telemecanique XCKJ EN/IEC 60947-5-1 (1 piece) - Schmersal TS 335-20z IEC60947-5-1 IP67 (1 piece) - Schmersal TV8S 335-11z-M20 IEC 60947-5-1 IP67 (1 piece) - Honeywell 1HP-125 VAC 2HP-250 (1 piece) Are you interested in this product or would you like more information? Please feel free to contact us. Nlodpszumlmefx Ac Uof Additional photos are available upon request. The price is negotiable. For more parts and other materials, you can also visit our website CNC-Service. Do you have any questions or are you looking for something specific? Please feel free to contact us!

Condition: ready for operation (used), Siemens stator for 1FK7042-5AF71 servo motor, serial number YFV343660309002, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nodpfx Acjzuu A Hj Uslf

Condition: used, Year of construction: 2015, - X-axis 80 m/min - 18-position tool changer - Drilling head with 30 spindles - 6,000 x 1,550 mm CNC nesting machine Manufacturer: Homag Type: BMG511/60/12/R Year of manufacture: 2015 Technical data - X-axis 80 m/min - 18-position tool changer - Drilling head with 30 spindles - 6,000 x 1,550 mm Workpiece parameters: Length with single workpiece loading: 6,000 mm / with pendulum machining 1,550 - 3,200 mm Widths: Max. 1,550 mm with stop at the rear and milling diameter 25 mm Workpiece thickness 275 mm including clamping device Up to max. 60 mm with standard clamping device Speed Pack: Increase in the max. travel speed of the X-axis to 80 m/min. With tool transfer station, on the left side of the machine bed Rotary tool changer, 18 positions Option for 18 x 130 mm tool diameter or 9 x 180 + 9 x 70 mm. Aggregate length max. 320 mm Machining spindle 12 kW (12 kW in S6 operation, 9.5 kW in S1 operation) Frequency-controlled rotation 0 - 24,000 rpm. C-axis with aggregate interface Drive for all aggregates with pivoting axis, pivoting range without limitation. Nlsdpfx Acszux Tcj Usf Interface for FLEX-5 aggregate Drilling head, 30 spindles: V20 / H10 / S360 MPU Multi-Processing Unit with C-axis +/- 185 for drilling and sawing operations at any angle. 20 vertical spindles in HIGH SPEED. Each drilling spindle with a quick-change system. Arrangement of spindles in a U-shape: 3 drilling rows with 11, 3 and 6 spindles, spindle spacing 32 mm 10 horizontal drilling spindles. 4 drilling spindle pairs with a spacing of 32 mm 1 drilling spindle pair spacing 320 mm Grooving and cut-off saw for max. saw blade diameter 200 mm. Basic design, slatted table: Slatted table with grooved aluminum profile Dynamic workpiece positioning on R-table The machine automatically checks the maximum possible part dimension based on the program layout. The vacuum areas are permanently assigned to the machining areas. Machine control POWERCONTROL PC 86 POWERTOUCH with 21.5 Full-HD multi-touch display WoodWop for graphical, dialog-oriented creation of CNC programs. The machine is supplied via an on-site vacuum system. Without its own vacuum pump.

Condition: new, Yokogawa UT351-01 Digital Indicating Controller with Active Color PV Display, serial number as per photo, unused, 100% functional, scope of delivery as per photos Njdpjzu Hy Defx Ac Uelf

Condition: excellent (used), Year of construction: 2016, ABB IRB4400L-10+IRC5 controller+TPU-Low DTC Nodpfx Acexq Tt Nj Uslf DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: excellent (used), Year of construction: 2016, ABB 2600-12/1.85 Type B Robot Full of options DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Njdpfx Acoxq Ttio Uslf