Used Elreha Step Regulator for sale (5,691)

Condition: ready for operation (used), AGIE PRD-01 C Process Regulator Device 613890.3, serial number as per photo, used, good condition, 100% functional, scope of delivery as per photos Hnjdpfoi D Tx Ujx Ab Njl

Condition: ready for operation (used), Agie Process regulator device PRD-08 B 629.792.3 with Agie Process regulator device PRD-09 B 629.743.6 , used, small traces of use, 100% functional Hjdpsi D Tygjfx Ab Nonl

Condition: ready for operation (used), Agie Process regulator device PRD-10 B 614.130.3 , used, slight signs of wear, 100% functional Hnjdpfx Asi D Tykjb Nsl

Condition: ready for operation (used), Step-Tec HVCS230-S-20-1.2/15-3FD-HSK-A63 high-speed spindle Id. 6014.058.A.10e removed from Norte VS500 Speed, the thread on one of the connectors is damaged, see photo, used, normal signs of wear, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Hsdsul Ipnepfx Ab Njnl

Condition: used, Simatic Field PG / Programming Device / Programming Computer / Laptop / Step 5, Step 7, ProTool, Notebook SIEMENS Type PG 720 PII Year of manufacture: approx. 1999 CPU: Intel Pentium II RAM: 192 MB Operating system: Windows 98 SE Hard drive: HDD 6 GB Display: 12" LCD (swivel-mounted) Input: Detachable keyboard, trackball Drives: 3.5" LS-120 floppy drive, CD-ROM Interfaces: - EPROM slot - PC/Card (PCMCIA) - MEM-Card - 1 x Parallel port - 1 x Serial port (RS232) 25-pin - 1 x Serial port (RS232) 9-pin - 1 x VGA out Hnodpox E Aywefx Ab Njl - 1 x USB - 1 x MPI/DP 9-pin - external power supply with power cord - In carrying case Installed Siemens software: - Step 5 V7.14 - Step 7 V5.1 - Step 7 MicroWin V5.2 - ProTool V5.2 - ProSave V1.1 - Logo!Soft V2.0 Overall dimensions (W x H x D): 400 x 270 x 200 mm (in carrying case) Total weight: 6.5 kg Computer operates, display functional, CMOS backup battery drained, Battery for mobile operation not functional, device boots. Siemens software operational.

Condition: used, Year of construction: 1988, Manufacturer: Haacke type: UW II A-CNC year of construction: 1988

 only for step drills up to max. Ø 30mm Hodpfxog Tvmbe Ab Nenl cross adjustment: 250mm height adjustment: 250mm grinding length: 400mm weight: 1,4t footprint: 2,5 x 1,2 x 1,9mm Application: for grinding steps on step drills Accessories:

 Paper belt filter make LKK Foreground flap collet chuck Forkardt Overz /BR 50/ LH-Z 24394

Year of construction: 2024, condition: new, - 4 separation steps - log length on request - log diameter on request - Discharge height on request - 5,5 KW SEW gear motor - R127 SEW gearbox Hjdpopfaubofx Ab Nsnl

Condition: new, Step By Step Wet Painting Systems Elboy Industrial Solutions designs and manufactures full range of paint shops for your product. With ELBOY, you can navigate through your facility with virtual reality in the design phase, enabling you to make the desired changes in the design phase and not to encounter the surprise results. It provides designing and manufacturing services for your application by paying special attention to environmental pollution and work safety issues for the processes of Sandblasting, Putty, Washing, Undercoat and Finishing Coat for all sizes of products. Step by Step are systems with overhead conveyor or floor conveyors which can be designed for all sizes of product. Booths of Sandblasting, Chemical Washing, Pre-coat, Drying, Putty , Top Coat and Baking can be integrated into the system. In order to respectively carry out the processes determined by the system step by step, the automatic doors are opened at the end of the time period and the product automatically proceeds to the next process line. Hodody Dw Ajpfx Ab Nsnl These fully automated systems are controlled via a 15” touch screen and provide various reporting methods such as main computer monitoring, product reporting and score reporting upon the demand and provide remote control. These are the paint shops where your product is designed and manufactured by our engineers in line with your capacity, use area and other demands. Maximum efficiency is aimed to be provided with minimum staff and the least space usage at electrostatic powder coating or wet paint, sandblasting, varnishing, coating, washing and similar system requirements.

Condition: used, functionality: unexamined, Ferwood Code: RU0011652 - Manufacturer Code: K6343K0944 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service, please contact us. Hnodjwtzcyepfx Ab Nsl

Condition: used, Details on request Hnodpob E Evbofx Ab Nsl

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: div., Sale of machines due to cessation of operations Due to the closure of our business, we are selling various like-new machines: 1. Buttonhole machine, BROTHER, HE-800B-2 – Target price: €2,895 2. Flatlock machines, Yamato, FD-62-01MR (MS7RF) – €2,495 each / Set price (2 pieces): €4,000 3. Metal detector, SBEC, model ZD-630D-120mm – Target price: €3,950 4. Label cutting machine, CUTEX, TBC-50SH – Target price: €1,995 5. Linking machine, EXACTA, Classe 602, Gauge 3, Made in Italy – Target price: €995 Hjdpfx Aswqz D Sob Nonl 6. Overlock machines, SIRUBA, 504M5-04/BK with servo motor and pneumatic presser foot lifter – €600 each / Set price (3 pieces): €1,600 7. Bartack machine, SunStar, SPS/E-BR1201M – Target price: €1,995 8. Bartack machine, Juki, LK-1904, Made in Japan – Target price: €1,495 9. Gathering machine, Pfaff, 901-3811-026/001, Model 492326, Made in Germany – Target price: €795 All prices ex works (EXW), location: 440157 Satu Mare, Romania. If you have any questions, we are happy to assist you. We look forward to your response. Best regards Otto Simma SIHA Group

Condition: used, axle configuration: 3 axles, first registration: 03/2004, total length: 13,750 mm, total width: 2,550 mm, suspension: air, tire size: 215/75 R 17.5, wheelbase: 9,500 mm, Year of construction: 2004, Equipment: ABS, = Additional Options and Accessories = - Lift axle - Air suspension Hedpfx Aoy Rt Eujb Nonl = Further Information = Axle configuration Tyre size: 215/75 R 17.5 Axle brand: BPW Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tyres; Tyre tread left inner: 60%; Tyre tread left outer: 60%; Tyre tread right inner: 60%; Tyre tread right outer: 60% Rear axle 2: Twin tyres; Tyre tread left inner: 60%; Tyre tread left outer: 60%; Tyre tread right inner: 60%; Tyre tread right outer: 60% Rear axle 3: Twin tyres; Tyre tread left inner: 40%; Tyre tread left outer: 40%; Tyre tread right inner: 40%; Tyre tread right outer: 40% Weights Unladen weight: 10,730 kg Payload: 30,270 kg Gross vehicle weight: 41,000 kg Condition Damage: none Identification Registration number: OH-27-LL

Condition: good (used), Year of construction: 2008, functionality: fully functional, Fully operational plasma cutting machine in very good condition. MicroStep PLS 7501.25PG Hodpswinpxsfx Ab Njnl Equipped with two torches: plasma and gas. Power source: Hypertherm, HyPerformance Plasma HPR260. Cuts mild steel and stainless steel. Table dimensions: 7.5 m x 2.5 m. The machine can be inspected under power in Vilnius.

Condition: used, Year of construction: 1989, functionality: fully functional, power: 1.8 kW (2.45 HP), type of input current: three-phase, input voltage: 380 V, rotational speed (max.): 2,800 rpm, rotational speed (min.): 150 rpm, We offer this used Stephan UMC 12-F mixing and blending unit, year of manufacture 1989. The machine is operational and ready for use. The unit has a faulty speed control mechanism (frequency inverter) and the speed is permanently set to 50%. Machine type: UMC 12-F Machine number: 714-27-101 Motor type: FD112M10- Motor number: 4812222 Rated voltage: 380 V Frequency: 50 Hz Motor power: 1.8 kW Number of phases: 3 Hnsdpfx Absy Ry Ezs Nel Speed range: 150-2800 rpm Protection class: IP 44 Current: 4.8 A Year of manufacture: 1989 If you have any questions or require additional information, please contact us by email or phone.

Condition: excellent (used), functionality: fully functional, Stephan MC 15 Vertical Microcutter / Emulsifier Brand: A. Stephan u. Söhne GmbH & Co. Model: MC 15 Power: 11 kW Voltage: 380 V 50 Hz Current: 21.5 A Rotational speed: 2,900 rpm Duty cycle: ED 100 (continuous operation) Protection class: IP 44 The compact vertical Stephan MC 15 emulsifier is a reliable unit for ultra-fine chopping and homogenization of food products. With its 11 kW motor and high rotational speed (2,900 rpm), the machine excels at producing emulsions, sauces, and fine meat fillings. Its robust construction, combined with continuous operation capability (ED 100%), makes it a highly efficient component of any production line. Hnjdpjyr S R Rjfx Ab Nol

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2202, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, type of input current: three-phase, input voltage: 400 V, input current: 50 A, Microstep Mastercut Eco Plus 3001.15 Year of manufacture: 2017 Control system: IMSNC Oxy-fuel cutting table: 3000 x 1500 mm Extraction duct left / right Plasma source: Kjellberg HiFocus 161i, adjustable 10 - 160 A Power source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions thanks to soft-switch inverter and microprocessor control • Optimal process control with ultra-fast regulation of cutting current • Process monitoring for torch cooling, ignition time, pilot arc time, short circuit time during torch ignition, and power source • Operating status and error display via LED and screen • Analog and serial interfaces for adaptation to CNC controllers • Infinitely adjustable cutting current from 10 - 160 A and during marking from 5 - 25 A • Optimal piercing through infinitely variable delay time for the main arc and adjustable current rise • Adjustable current reduction for cornering, start, and end signals of the guidance system • Automatic display of the preset cutting current • Serial data transmission for PC-based diagnostics Plasma cutting technology: Contour Cut • Further development of HiFocus technology for mild steel • Optimized for cutting fine internal and external contours • High cutting quality and contour accuracy • Holes with angular deviations according to DIN EN ISO 9013 range 2-4 • Minimal angular deviations and smooth cut surfaces • Excellent repeatability and dimensional accuracy • No tedious post-processing – high productivity and low costs • No additional equipment, software, or new consumables required • Standard equipment Plasma torch PerCut 200/210 • PerCut 200 plasma machine torch for standard applications and high-precision bevel cutting • Quick-change PerCut 210 torch with threaded lock for quick and convenient tool swapping • Special torches available for special applications • Higher cutting speeds reduce cost per meter • Long service life of consumables conserves resources Hjdpfxoy Nd Hye Ab Nonl • Narrower kerf means fewer emissions and less waste • Significantly lower gas consumption compared to competitors thanks to efficient liquid cooling up to the nozzle tip • Lower noise levels due to reduced gas consumption • Bevel cutting up to 50 degrees with standard consumables • Cutting and marking possible with the same consumables Power source HiFocus 161i Power supply: 400 V; 3 Ph; 50 Hz Max. power input: 28 kVA (100% duty cycle) Main fuse, slow-blow: 50 A Protection class: IP22 Open circuit voltage: 330 V Cutting current: 10 – 160 A (100% duty cycle) Marking current: 5 – 25 A (100% duty cycle) Cutting range: Max. 50 mm Recommended: 0.5 – 38 mm Max. piercing thickness: 30 mm Weight: 206 kg Plasma machine torch PerCut 200 Quick-change torch PerCut 210 Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, Air, N2/H2 (F5)

Condition: repair required (used), functionality: limited functionality, Year of construction: 2017, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: IPG, laser source model: YLS-4000-CUT, We offer this repair-required VIRS MSF 3001.15L laser cutting machine, year 2017. Manufacturer: Microstep / VIRS Model: MSF 3001.15L Year of manufacture: 2017 Modules 1, 4, and 5 automatically lock immediately after cutting and require unlocking by IPG. Half of the 2 kW power is available. Hnjdpfxoy Ri Tue Ab Nel If you have any additional questions or need more information, please send us a message or call us.

Condition: used, Year of construction: 2019, This MicroStep Master Cut CNC plasma cutting machine, type RS, is being auctioned online in our industrial auction/machinery auction for the inventory of ZINK NFZ GmbH & Co. KG. Hnsdjy Hqmzjpfx Ab Njl You can find this and many other items on our platform.

Condition: ready for operation (used), Year of construction: 2021, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, controller manufacturer: MicroStep, controller model: iMSNC, number of axes: 3, This 3-axis MicroStep 3001.15P/ME plasma cutting machine was manufactured in 2021. It features a working area of 1500x3000mm, ideal for precise and large-scale cutting tasks. If you are looking to get high-quality cutting capabilities, consider the MicroStep 3001.15P/ME machine we have for sale. Contact us for more information. • Working dimensions: 1500 x 3000 mm • Permissible plate thickness: stable construction up to 100 mm material thickness • Guides/Drives: high-quality linear guides and double-sided clearance-free drive Hodpfx Abjycvq Ao Nenl • Axis control: digital, maintenance-free AC servos with IRC • Positioning speed: up to 40,000 mm/min • Measuring system: IRC 2500 (incremental encoder) • CNC control: MicroStep iMSNC with integrated network card • Plasma power source: Hypertherm XPR170 • Gas console: automatic Core gas console • Table surface: grid cover in the cutting table • Height control: "THC" module for automatic height regulation via arc voltage • Marking unit: "MicroPunch" needle marking unit • Safety features: double-sided rope safety system (collision protection) for the gantry via Emergency Stop • Visual signaling: 2-color LED signal tower on the gantry bridge • Operation interface: externally standing MMI console • Connectivity: USB 3.0 port for storage media • Software: AsperWin Basic (2D programming) and AsperWin Nesting (automatic nesting)

Condition: like new (used), Year of construction: 2023, operating hours: 1,400 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, For sale: MicroStep WaterCut 2001.30W waterjet cutting machine in perfect condition, manufactured in 2023. The machine is equipped with a BFT Ecotron 40.37 high-pressure pump – 4000 bar and 37kW – one of the top-performing and most reliable pumps on the market. Key specifications: - Working area: 2000 x 3000 mm - Cutting head: 3-axis with anti-collision sensor - Total working hours: approx. 1400 h The machine is sold as a complete, ready-to-run package, including: Hedoy Ecr Hopfx Ab Nonl - 1-ton abrasive feeder (Allfi) - Automatic sludge removal system (tank cleaning system) This configuration allows you to begin production immediately without additional investment. The machine is available for immediate delivery.

Condition: used, Year of construction: 2024, CNC plasma cutting machine Manufacturer: Microstep Model: MasterCut Compact 3001.15P Year of manufacture: 2024 Hjdjytqmmspfx Ab Njnl Working area: 1,500 x 3,000 mm 1 x plasma torch with Kjellberg Q1500 plasma source with automatic O² gas console (O², N²) 1 x TEKA filter unit for outdoor installation 1 x nesting software on the machine control Availability: immediately

Condition: used, Year of construction: 2019, CNC Gantry Plasma Cutting Machine Manufacturer: Microstep Model: MG 4501.20 BkP Year of manufacture: 2019 CNC control system Working area: 2,000 x 4,500 mm Hjdpfx Aboyay H Ao Nenl 1 x 2D plasma torch with Hypertherm XPR300 power source including Optimix gas console 1 x drilling spindle 26 kW, up to 40 mm diameter, including 8-position automatic tool changer 1 x preparation for retrofitting a rotator (for bevel cutting) 1 x nesting software on the CNC control ä12526 Availability: May 2026

Condition: used, Year of construction: 2019, CNC Gantry Plasma Cutting Machine Manufacturer: Microstep Model: MasterCut Compact 4001.20Ptk Year of manufacture: 2019 CNC control Working area: 2 x 4 m 'Plasmarotator MasterCut' Hnodpfxsxnmbnj Ab Nel with fully automatic support for weld seam preparation 1 plasma torch with Kjellberg HiFocus 280i power source TEKA filter unit ä12526

Condition: good (used), Year of construction: 2012, CNC Gantry Plasma Cutting Machine Manufacturer: Microstep Model: SPL PAA 9001.25 Year of manufacture: 2012 CNC control Working area: 2,500 x 9,000 mm Hodpfxju U Hm As Ab Njnl 1 plasma torch with Kjellberg HiFocus 280i power source 2 propane oxy-fuel torches Beuting oscillating conveyor table Donaldson DFPRO12 filter unit for outdoor installation

Condition: used, Year of construction: 2012, CNC Laser Cutting System Manufacturer: Microstep Model: FibreLas MSF 3001.15L Year of manufacture: 2012 CNC Control: iMSNC Windows Laser hours approx.: 4,000-5,000 Laser power: 2.5 kW Working area: 3,000 x 1,500 mm Sheet thickness (steel, max.): 15 mm Sheet thickness (stainless steel, max.): 8 mm Sheet thickness (aluminium, max.): 8 mm Operating temperature: +10 to +30 °C and max. 90% relative humidity (at 20°C) Hnsdpfjx Eh Drex Ab Nel Extraction duct (left & right): Outlet left Ø 250 mm Laser source: IPG Ytterbium Laser System YLS 2.5 kW Laser chiller: LC 170.01-A.3.5 Voltage: 400 V / 3P / 50 Hz Filter unit: TEKA 4H 5.5 kW Overall dimensions: approx. 10,400 x 3,610 mm