Used Elu Mgs 73 for sale (1,675)

Condition: used, Year of construction: 2000, Overview This bottle washer from the German manufacturer Klinger was built in 2000. The washer is made entirely of stainless steel, has a Siemens S7 control, 2-fold heaters and surge pumps for high cleaning performance. Technical details Capacity: 9,600 bph;   20 bottles per row Scope of delivery bottle washer | Klinger | Euro Class-D 20/1/73 | 2000 water treatment plant | Hager + Elsässer | 2000 incl. cation and anion exchanger, incl. salt container, pre-filter and UV probe with a capacity of 5 m3/h and  The water treatment system was designed to operate the bottle washer and the RO system RO reverse osmosis plant | Hager + Elsässer | 2000  with full desalination capacity of 2.5 m3/h Dcsdpstxd A Ssfx Aqcoh

Condition: used, functionality: limited functionality, gearing type: hydrostat, fuel type: diesel, color: yellow, overall weight: 20,000 kg, number of seats: 1, first registration: 01/1992, Year of construction: 1992, machine/vehicle number: 20412, Equipment: additional headlights, cabin, parking heater, We offer this used Mannesmann Demag V 73 mobile crane, year of manufacture 1992. Type: V 73 Chassis number: 20 412 Year of first commissioning: 1992 Dodsyi D Ddepfx Aqcjch Permissible total weight: 20,000 kg Permissible front axle load: 10,000 kg Maximum lifting capacity: 14 t Maximum outreach: 13 m Last inspection: 2023 The load moment limiter is not operational. If you have any questions or require further information, please feel free to send us a message.

Condition: good (used), gear motor, electric motor, electric gear motor -Manufacturer: Cebeha, gear motor type CB 73/4/2P -Speed: 83/166 rpm -Engine: 5.5/7.5 kW -Shaft: Ø 60 x 70 mm -Protection class: P33 -Total dimensions: 740/400/H445 mm -Weight: 166 kg Dsdpfov Avgmex Aqcjch

Condition: good (used), Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier, slide guide -Tool slide: Support slide lower part support carrier Djdpfxewcw S Ne Aqcoch -Dovetail: 90 to 73 mm 12 mm high -Dimensions: see photos -Quantity: 5x bottoms available -Price: per piece -Dimensions: 210/180/H25 mm -Weight: 4 kg/piece

Condition: good (used), Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tie rod cylinder, compensating cylinder -Hydraulic cylinder: tie rod cylinder stroke 73 mm -Type: unfortunately without type designation -Piston rod: Ø 16 mm / M12 -Dimensions: 225/70/H90 mm -Weight: 3.3 kg Dsdpfx Aqsv Tik Hococh

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders, lifting power jacks -Manufacturer: Milwaukee, double-acting hydraulic cylinder stroke 600 mm -Type: H-73 -Piston rod: Ø 16 mm -Holes: Ø 25 mm / Ø 18 mm -Dimensions: 885/220/H180 mm Dodpfx Aqov Nip Uecjch -Weight: 16.3 kg

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke mm -Piston rod: Ø 14 mm Dsdsv N Eidjpfx Aqcsch -Holes: Ø 12 mm / Distance: retracted 323 mm -Dimensions: 370/73/H75 mm -Weight: 2.4 kg

Condition: good (used), Geared motor, electric motor, three-phase motor, right-angle gear motor -Speed: 32 rpm -Power: 0.6 kW -Design: B3 -Shaft diameter: Ø 38 mm Dodpfx Aqsc Nt Rdecech -Protection class: IP 44 -Dimensions: 500/250/H280 mm -Weight: 41 kg

Condition: good (used), Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type: RF43 DT90S4/TH i=19.15 -Speed: 73 rpm -Power: 1.1 kW Dsdpfx Aepu Itqjqcjch -Design: B5 -Shaft: Ø 25 x 50 mm -Protection class: IP 54 -Dimensions: 500/200/H110 mm -Weight: 25 kg

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 73 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Brake -Protection class: IP 54 -Number: 3x motors available Dcsdpfxoci N H Us Aqcoh -Price: per piece -Weight: 18.5 kg

Condition: used, Collet holder, tool holder, tool holder, milling holder, milling tool -Adjustment: SK50 -without adapter sleeves -Manufacturer: HOLEX -Type: SK 50-3/32-73 -Hoffmann Group No.: 302 460 50 Dsdpjc U Tz Tsfx Aqcech -Weight: 3.4 kg

Condition: used, Gear motor, electric motor -Speed: 73 rpm -Power: 0.25 kW Djdjc U Rhyjpfx Aqcech -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Number: 2x motors available -Price: per piece -Dimensions: 405/195/H165 mm -Weight: 14.8 kg

Condition: refurbished (used), SCHLATTER Welded wire mesh production line MG24 Full revamped WORKING RANGE Panel width: max. 2500 mm Weft wire length: min. 900 mm Dcedowu Tu Djpfx Aqceh Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24 WELDING MESH MACHINE MG 24.1/8C, Basic equipment including: - 1 Machine frame - 1 Upper support for press reception, continuously adjustable by hand crank - 1 Magnet supports with retaining magnets and weft wire monitoring. - 1 Row of pneumatic solenoid valves for press actuation. - 1 Installation for air and water. - 2 Pneumatic rotary drives with oil damping - Static motor torque with 5 bar compressed air: 480 Nm - Front continuously adjustable from: 25 - 250 mm adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION 8 Type C Transformers Rated power of each transformer: 100 kVA No-load secondary voltage: 7.1 V Rated secondary current: 14 kA 8 Thyristor contactors ES 130 12 Welding presses: 5.0 kN 12 Chain current bridge for spacing of warp wires: 50-100 mm 12 Chain current bridge for spacing of warp wires (for offset warp wires): 100 mm 10 Chain current bridge for spacing of warp wires: 100-150 mm 8 Chain current bridge for spacing of warp wires (for offset warp wires): 150 mm 6 Chain current bridge for spacing of warp wires: 150 - 200 mm 6 Chain current bridge for spacing of warp wires (for offset warp wires): 200 mm 24 Lower electrode holders Cu with standard angled electrodes and each with a water-cooled current cable, width: 58 mm 24 Wire clamping pliers Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24

Condition: used, maximum load weight: 6,920 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 09/2016, loading space length: 7,200 mm, loading space width: 2,460 mm, loading space height: 2,620 mm, loading space volume: 46 m³, Equipment: ABS, Tyres 245/70 R19.5 Tread depth in mm 5/5-5/5 Axle type Gigant Gross weight 10,500 kg Unladen weight 3,580 kg Equipment: air suspension, disc brakes, loading area 7.2 x 2.46 x 2.62 m, through-loading function----As viewed or offered, without any additional services or accessories. Our offer does not include a new technical inspection (TÜV) by default. If a new TÜV inspection is required, we are happy to provide a quote from our partner workshops! Vehicle may have advertising decals and/or lettering applied. Our general terms and conditions of delivery and payment apply. We support you with export, preparation of export documents, procurement of license plates, supplier declarations, etc.! The information provided in advertisements, online listings, price tags, and images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing or data transmission errors. Listed equipment must be checked separately if required. We expressly reserve the right to prior sale as we also offer this item on other platforms. Information on accessories is given without guarantee. Changes, prior sale or errors excepted. We strongly offer and recommend viewing and inspection, to avoid any misunderstandings regarding the condition and suitability of the vehicle for the buyer. Vehicle and tarpaulin may be labeled, images may be edited. We sell exclusively under our general terms and conditions, with all warranties excluded. Dcodpfx Aqsx Tbxneceh Viewings and inspections are possible at any time by appointment and are expressly encouraged.

Year of construction: 1982, condition: used, In Good Condition Dodedq Ug Ispfx Aqcsch

Condition: new, 10 St. weight 162 kg range L-W-H 1200 x 800 x 1050 mm Djdju Imluepfx Aqcoch Workshop trolley with 30 mm thick solid wood panel. Solid drawers with ball bearings (double bearings) All drawers can be opened 100%. Equipped with scratch and impact resistant powder coating. Each drawer is equipped with an anti-slip mat. All drawers are equipped with a drawer lock. The doors have a magnetic lock and lock. Tool trolley is equipped with 10 drawers and a cabinet with 2 doors. Scope of delivery: 2 x 125 mm. Heavy swivel castor with brake. 2 x 125 mm. Heavy firm roles. 1 x robust handle made of solid steel. 3 x lock for all drawers and doors.

Condition: ready for operation (used), Heidenhain RON 425B.0015-1250 rotary encoder ID: 256 080 73 SN: 6 391 665, used, as good as new, 100% functional, scope of delivery as per photos Dcjdpfx Aqoi Eaw Hecoh

Condition: new, Heidenhain RON 425B.0015-1250 ID: 256 080 73 SN: 5 725 465, unused in opened original packaging, 100% functional, scope of delivery as per photos Dcedsi Eaw Ropfx Aqcsh

Condition: new, Heidenhain LS 776 linear encoder ML: 320 mm, 336 966-73 SN:28221931M + AE LS 776 read head, 672254-01 SN:28221933, unused in opened original packaging, 100% functional, delivery as per photos Dcodpfxsx Er Iqo Aqceh

Condition: new, Heidenhain LS 776 linear scale ML: 320 mm, 336 966-73 SN:27412980M + AE LS 776 reading head, 672 254-01 SN:27412981, unused in opened original packaging, 100% functional, scope of delivery as shown in the photos Dcsdpfx Asx Er Ikoqcoh

Condition: ready for operation (used), Heidenhain Siemens 6FX2001-5JE20-2DC0 DQ01 . 1088744-70 encoder, serial no.: 73 756 194 A, used, good condition, 100% functional, scope of delivery as per photos. Dcedex Erv Iepfx Aqcjh

Condition: used, empty load weight: 3,555 kg, maximum load weight: 6,435 kg, overall weight: 9,990 kg, axle configuration: 2 axles, first registration: 03/1999, loading space length: 7,300 mm, loading space width: 2,450 mm, loading space height: 2,600 mm, total length: 2,550 mm, total width: 3,610 mm, suspension: air, tire size: 235 / 75 R 17,5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 2-axle, tandem, air-suspended, lifting+lowering, Edscha, curtain, portal doors, lashing eyes, rear support ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Dedpfsi Rnyrjx Aqcsch - .

Condition: new, Year of construction: 2023, functionality: fully functional, Cable Granulation Plant MG Recycling 220VZT with Pre-Shredder Tritronic 845i Original packaging, immediately available Throughput approx. 400–500 kg/h (depending on material) Cable granulation system power: 60.5 kW Comprising: - Cutting mill - Zig-zag separator - Pelletizing mill - Separation table - Pneumatic conveying system with filtration unit Pre-shredder Tritronic 845i Power: 45 kW Rotor length: 800 mm With conveyor belt and intermediate bunker Djdsxz Ur Ispfx Aqcsch Automatic integration with the cable granulation plant

Condition: used, Year of construction: 2019, Cable granulation plant MG Recycling 380VZT Year of manufacture: 2019, little used, approximately 1,500 operating hours immediately available Dsdpfx Aoxz Utreqcsch The cable granulation plant consists of: - Cutting mill - Zig-zag separator - Balling mill - Separation table - Pneumatic conveying system with filter unit - Feed hopper 1.2 m² with feed belt

Condition: used, Year of construction: 2000, operating hours: 15,800 h, Used Bottle Washer KLINGER up to 9600 bph This Bottle Washer handles up to 9,600 bottles per hour. The machine features 20 bottles per row, ensuring a long soaking time and double lye pumps. Constructed entirely of stainless steel, this bottle washer uses a Siemens S7 control system, ensuring reliable and precise operation. Technical Specifications of the Washing System The Used Bottle Washer KLINGER up to 9600 bph includes double heaters and overflow pumps, providing a high cleaning capacity. Consequently, this configuration treats each bottle uniformly, enhancing the efficiency of the washing process. The Siemens S7 control system, furthermore, offers a user-friendly interface via a touch panel, simplifying operational management. Potable Water Treatment Plant Potable water treatment plays a crucial role in the proper functioning of the bottle washer. Hager + Elsässer provides the plant, which includes cation and anion exchangers, a salt container, a pre-filter, and a UV probe. This system processes 5 m³/h, ensuring high-quality water. Additionally, the reverse osmosis (RO) plant delivers a total desalination capacity of 2.5 m³/h, ensuring pure water for the washing process. Electrical Configuration and Control Panels This Bottle Washer features three electrical panels, arranged from left to right, with a Siemens touch panel for centralized control. This configuration allows for accurate monitoring and optimal operational management. In addition, the upper panels handle cooling, with a total residence time of 4.13 minutes and a treatment time of 1.63 minutes. Technical details Bottle cells: width and diameter: height 100 mm. 360 mm spray hole in the base of the cell diameter 20 mm. The bottle cell is not round on the lower insertion side, but flattened , so that even bottles with small diameters can be inserted into the cell without any problems. Bottles from 200 ml to 1,500 ml can be rinsed. The diameter of the bottle mouth must not be smaller than the spray hole in the bottom of the cell, i.e. at least 20 mm. If the bottles are very light, or made of PVC, the spray pressure of the pumps could be reduced using software, so that the bottles are not sprayed out of the cell. Fort PVC bottles the diameter of the bottles should not be smaller than 50 mm, depending on the shape and weight. The higher the weight, the better… PVC bottles do not cause problems because of their shape or diameter, but are usually too light… So your bottles can be easily worked. Dodpfx Aexqmrfeqcoch Treatment and Spraying Details of the Used Bottle Washer KLINGER up to 9600 bph The central panel, on the other hand, manages the spraying times with the following specifications: Spraying soda: 0.5 min. Residual soda: 0.83 min. Hot water: 0.38 min. Warm water: 0.38 min. Cold water: 0.38 min. Fresh water: 0.