Used Emmegi Precision Ts Tu/6 for sale (58,873)

Year of construction: 1991, condition: good (used), machine/vehicle number: 166, Offer 22014 Technical Data: - max. working width 4080 mm Tsdpfx Ash N U Hpefwjb - max. cutting capacity St 40 6 mm - hydraulic cutting angle adjustment - manual cutting gap adjustment - stroke rate, depending on cutting angle and cutting length, approx. 20 - 25 per minute - rear stop with positioning control ELGO, 10 - 1000 mm - cutting length adjustment - 17 hydraulic clamping cylinders - front angle stop - front support arms - Drive 400 V / 9 kW - Foot pedal - Space required without support arms, approx. W 4450 x H 1900 x D 2300 mm - Weight approx. 10500 kg

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 600 mm, input voltage: 400 V, overall weight: 3,560 kg, workpiece height (max.): 170 mm, The fast deburring machine for deburring, rounding and finishing steel cut parts up to 600 mm wide. This Q-Fin deburring and finishing machine was developed especially for applying a large radius of up to 2 mm on steel sheet. With the SER600 Super Edge Rounder from Q-Fin it is possible to deburr, grind, edge break, round off, remove slag, remove oxide skin or apply a line finish to sheet metal up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2024 machine is equipped with magnetic support, making it suitable for processing steel cut parts and other magnetic materials. This machine is equipped with as many as 5 machining stations. Easy operation through an HMI touch screen on the front of the machine. The first station of the SER600 consists of a grinding unit. The grinding belt of this unit removes burrs and/or burn-in points from the product surface. If you have no burrs, you can leave the grinding belt off or remove them. Tedpfx Afjl Dw D Eewsb It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. The second and the third station consists of the disc brush unit containing 4 oscillating disc brushes. The fourth and the fifth station consists of 2 round brushes, rotating counterclockwise and clockwise. With the brushes you remove the sharp edges of the product by breaking the edges or, by the unique combination of two brush systems, edge round them with a radius up to R=3 mm. The installation of special brushes makes this SER600 with magnetic system also very suitable to remove the oxide skin of steel products or slag from plasma cut products. We sell the combination with a WES6000 wet working grinding dust extraction system as 'SER600 Set'. The WES6000 was developed by Q-Fin to extract grinding dust safely and without pressure loss. This fully stainless steel extraction system is a wet-acting system that extracts grinding dust from stainless steel, steel and aluminum, eliminating the risk of fire and explosion. According to Q-Fin, it is the safest, easiest and most durable way to extract grinding dust. No more grinding dust in the air and/or work environment with the WES6000. At this moment we have two SER600 machines in stock: 1x new (built year 2025) 1x used for only a few months; as new. built year 2024. Both machines can be viewed by appointment in Bergeijk. Both machines have a 1 year warranty on construction and all non-wearing parts. We can also provide on-site installation of the SER600 + WES6000) including training for the operators. - Connected load SER600 machine: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Condition: used, Year of construction: 2012, x-travel 1600 mm y-travel 710 mm z-travel 700 mm Control HEIDENHAIN, TNC 124 table surface area 2200 x 550 mm spindle taper SK 50 DIN 69871 Tedpfx Afjyyqgujwjb spindle turning speed - stepless 40 - 1600 U/min spindle drive 11 kW feed X/Y/Z-axis 2000/2000/1000 mm/min. rapid traverse X/Y/Z axis 5000/5000/2500 mm/min feed motor 3 kW distance table / vertical spindle 50 - 750 mm distance table/horizontal spindle 60 - 760 mm table load max. 3000 kg total power requirement 15 kW weight of the machine ca. 8 t dimensions of machine L x W x H 3,15 x 2,75 x 2,70 m Accessories: Univ.-milling head with hydr. tool clamping, electron. handwheel, table housing, coolant

Year of construction: 1995, condition: used, Max. saw blade diameter: 280 mm Pneumatic material clamps Tsdjzvd N Eepfx Afwsb Rotatable table with locking points Minimum quantity spray device Roller tracks and length stops available in different lengths on request

Condition: used, Year of construction: 2002, sheet width 3000 mm plate thickness 6 mm distance between columns 3200 mm speed . m/min rear stop 1000 mm total power requirement 7,5 kW The backgauge is electric. The technical data is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to sell the machine prior to sale; our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team Tedjyqwbrspfx Afwjb

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4960x1900x1700 mm Tsdpfx Aev Ucirefwsb Total power requirement 0 kW Weight 6000 kg

Condition: used, mileage: 480,000 km, power: 184 kW (250.17 HP), first registration: 03/2011, fuel type: diesel, overall weight: 7,500 kg, gearing type: mechanical, emission class: euro5, number of seats: 2, loading space length: 6,170 mm, loading space width: 2,500 mm, Equipment: air conditioning, electronic stability program (ESP), MAN TGL 8.250 First registration: 03/2011 Mileage: 480,000 km 6 cylinders Flatbed Air conditioning Tjdpfx Afezkxk Howeb Valid TÜV (technical inspection) until 10/2026 Feel free to visit our website: ----German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/...?/...?... Roman We will be happy to assist you with financing or leasing. EU sales: net price upon presentation of company documents and VAT number. VAT deposit: 2000 EUR Our services for you: - Customs license plates - Export documents and EUR1 certificate - Worldwide transport - Overnight accommodation - Transfer from Munich Airport or Passau train station

Condition: reconditioned (used), functionality: fully functional, Refurbished sharpening machine for carbide-tipped circular saw blades. Tedpfxszmhd Uj Afwjb Blade diameter up to 600 mm. Hydraulically controlled. Equipped with a cooling system, pump, and tank.

Condition: ready for operation (used), Year of construction: 1998, operating hours: 28,701 h, clamping force: 800 kN, Vertical injection moulding machine manufactured in 1998. This Arburg 1200 TS 800-60-350 features a clamping force of 800 kN and includes two injection units: a vertical unit with a Ø22 mm screw and a horizontal unit with a Ø35 mm screw. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 1200 TS 800-60-350 machine we have for sale. Contact us for further details. • Clamping Force: 800 kN • Number of Injection Units: 2 • Injection Unit 1: Vertical, Ø22 mm screw Todpfx Aszlqtcofwjb • Injection Unit 2: Horizontal, Ø35 mm screw • Operating Voltage: 400 V • Phase: 3~ • Frequency: 50 Hz • Connected Load: 55.9 kW • Rated Current: 93 A • Control Voltage: 24 V DC • Protection Class: IP54 • Hydraulic Pressure: 210 bar • Rotary Table: Yes • Safety Enclosure: Yes • Pump Operating Hours: 35,290 h • Automatic Operating Hours: 28,701 h

Condition: used, mileage: 239,915 km, power: 130 kW (176.75 HP), first registration: 09/2008, fuel type: diesel, empty load weight: 5,300 kg, maximum load weight: 3,100 kg, overall weight: 8,400 kg, tire size: 405/70 20, tire condition: 40 %, axle configuration: 4x4, color: yellow, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, Year of construction: 2008, operating hours: 239,915 h, front tire size: 405/70 20, rear tire size: 405/70 20, Equipment: ABS, all wheel drive, cabin, cruise control, differential lock, onboard computer, sliding door, trailer coupling, truck registration, Reference number for inquiries: 41049 Unimog U 4000 Doka * Year of manufacture: 2008 * ABS (Anti-lock Braking System) * Trailer coupling * Crew cab * Power steering * Cruise control * On-board computer * Differential lock * Radio/CD * AdBlue tank * Transmission type: Telligent manual transmission * Suspension: leaf spring front / leaf spring rear * Gross vehicle weight: 8,400 kg * Curb weight: 5,300 kg * Payload: 3,100 kg * Perm. total weight: 8,400 kg * Tyre condition, 1st axle: 40% -- 40% - Tyre size: 405/70 R20 * Tyre condition, 2nd axle: 40% -- 40% - Tyre size: 405/70 R20 * Tyre sizes: 405/70 R20 * Unimog U4000 437/25 * Double cab Disclaimer: Subject to change, prior sale, and possible errors. More photos and videos are available on our website. Our extensive range of services includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing options Tsdpjyy H Eyofx Afwsb * Handling of all (export) paperwork * Arrangement of export / customs registration plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading and cargo securing * TÜV inspections, registration service * Delivery/transfer of commercial vehicles Please contact our trained staff — we will be pleased to advise you.

Condition: excellent (used), Rittal TS 8806.500 Enclosure Rittal Standard Enclosure TS 8806.500 Lighting PS 4155100 220 x 80 x 60 cm (H x W x D) Powder-coated Air Conditioning Unit Rittal SK 3304500 EAN: 4028177251038 Further enclosures in other sizes – new and used – can be found in our shop! Tsdpfx Aexl Td Rofwob International shipping costs upon request!

Condition: good (used), Year of construction: 1967, Kupfermuller Lignum double-sided thicknesser Tsdpfotzcmtox Afweb Kupfermuller Lignum double-sided thicknesser. Stable construction. The machine has a planing width of 630 mm and 4-knife shafts. The machine has a processing accuracy of 0.1 mm. The planing height is 180 mm. The machine has steel rollers mounted in a table with its own drive, that is, active split rollers. The machine is therefore ideal for planing wet and dry wood for gluing. Net price. VAT invoice, machine with electrical cable covers and stop buttons on both sides, ready to go. Stable cast iron construction. Weight of about 3 tons. The machine does not require any financial outlay.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 201502530269, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 600 mm, table load: 560 kg, Equipment: documentation/manual, type plate available, ZEISS CONTURA G2 7/7/6 – VAST XXT TL1 Year of Manufacture: 2015 | Commissioned: 2016 | Immaculate Condition | Extremely Low Operating Hours We are offering for sale a ZEISS Contura G2 coordinate measuring machine (CMM) with a measuring range of 700 × 700 × 600 mm, equipped with a VAST XXT TL1 scanning probe head. The device comes from a controlled laboratory environment and was used exclusively on-demand, single-shift operation, never on a production line – resulting in exceptionally low actual usage and outstanding technical condition. 🔹 Basic Information Manufacturer: ZEISS Model: Contura G2 Measuring Range (X/Y/Z): 700 / 700 / 600 mm Year of Manufacture: 2015 Commissioned: 2016 Technical and Visual Condition: Perfect Measurement Error MPE (E0) = 1.7+L / 350 μm 🔹 Configuration and Accessories ✅ ZEISS VAST XXT TL1 active scanning probe head ✅ Stylus rack / magazine ✅ Set of measuring styli (mainly diameters ⌀ 0.6 mm and ⌀ 1.5 mm) ✅ Reference sphere ✅ BP26_SE control console 🔹 Usage History Device used exclusively in laboratory conditions Occasional, project-based (on-demand) use Todpfx Afsyzmbdewjb Single-shift operation, no serial or production work As a result, the machine exhibits extremely minimal mechanical wear 🔹 Service and Calibration ✅ Service and calibration exclusively by official ZEISS technicians ✅ Regular maintenance according to manufacturer guidelines ✅ No third-party interventions ✅ Device fully operational 🔹 Status 📍 Machine available immediately 🔍 Viewing possible 📄 Full documentation included ✅ Buyer arranges transport

Condition: used, mileage: 14,800 km, power: 80 kW (108.77 HP), first registration: 03/1997, fuel type: gasoline, overall weight: 3,500 kg, next inspection (TÜV): 11/2027, color: red, gearing type: mechanical, emission class: euro1, number of seats: 6, total length: 5,115 mm, total width: 2,140 mm, total height: 2,450 mm, loading space length: 1,950 mm, loading space width: 2,100 mm, loading space height: 1,480 mm, Year of construction: 1997, 1st owner. Only 14,800 total kilometers driven originally. In full service with the fire department until March 2026. Shortly thereafter, driven to us on the highway for approximately 250 kilometers without any issues. Valid TÜV (German vehicle inspection) until November 2027 (passed at DEKRA with 14,535 km, “no defects found”). Major engine service with all fluids, new timing belt, new water pump, new spark plugs, etc., in February 2025 at 14,057 km, documented with a receipt of €2311.19 from a car repair shop. TSF (fire department vehicle) superstructure with roller shutters and ladder mounts on the roof. 6 seats and 4 doors. Power steering. 2.0-liter gasoline engine with 109 hp and G-CAT catalytic converter. Emission code: 93/59/I GKL:G1 (31), which means it qualifies for the green environmental badge. 5-speed manual transmission. Unladen weight: 2267 kg. Permissible total weight (original from the factory and never changed): 3500 kg. Overall dimensions of the vehicle (exterior): length 5115 mm / width 2140 mm / height 2450 mm. Vehicle with minor paint damage and signs of wear. Overall in good condition. Approved for road use with the original German documents continuously until April 2026. Immediately ready to drive. The illustrated retractable TS (pump) can remain in the vehicle after consultation. The pump has an oil leak and is not fully operational. The TS will not be sold separately. This offer is only valid for commercial businesses, self-employed individuals, and freelancers of all kinds, as well as for authorities/emergency services. Sales to private end consumers are unfortunately not possible. Subject to prior sale and errors. Differential taxation according to §25a UStG (value-added tax cannot be shown separately and will not be added). Todpfjy Upbmox Afwjb

Condition: used, Tunnissen TS 532 shredder • Throughput 260 mm • Equipped with slow-moving vehicle chassis Tjdpfex I Dvrex Afwob • Wide tires • Own registration plate • Available as a combination, see reference 12298 Condition: Used

Condition: used, mileage: 850,000 km, first registration: 07/2016, fuel type: diesel, axle configuration: 6x2, wheelbase: 4,600 mm, fuel: diesel, brakes: engine braking, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, Year of construction: 2016, Equipment: ABS, Bluetooth, electric window regulation, parking heater, power assisted steering, power mirror, seat heater, = Additional options and accessories = Todpoypcf Hjfx Afwsb - Air suspension - Disc brakes - Electrically adjustable seats - Hub Reduction - I shift - Lift Axle - Radio - Refridgerator - Speed limiter - Sper - Steering Axle - Work lamp(s) = Remarks = Volvo FH750, 2016, 6x2 with steering axle, Hub reduction, PTO = More information = Number of doors: 2 Number of cylinders: 6 Engine capacity: 16 cc = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 181199, Machine no.: 181199 Manufacturer: AGTOS Type: Barrel blasting machine Designation: TS 150-3.6-01-15,0 Turbines: 1 turbine with 15.0 kW Extraction air volume: 3000 m³/h Max. batch weight: approx. 1000 kg Type: Sinter-plate filter Other details Characteristics of the installed filter system Residual dust content: ≤ 1 mg/Nm³ Characteristics of the blasting system Blasting media (material and size): Wire grain Blasting media quantity (initial filling): approx. 1000 kg Workpiece temperature: max. 80°C Drum length: 900 mm Tsdpforq Hmzox Afwob Drum diameter: 800 mm Max. Drum load: 250 kg Max. Single piece weight: 5 kg Capacity: 150 liters Max. Feeder lifting capacity: 480 kg Sound pressure level without sound insulation: ≤ 85 dB(A)

Condition: good (used), mileage: 947,000 km, power: 300 kW (407.89 HP), first registration: 01/2008, fuel type: diesel, wheelbase: 7,000 mm, fuel: diesel, driver cabin: day cab, gearing type: mechanical, number of gears: 16, emission class: euro5, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2008, Equipment: ABS, air conditioning, electric window regulation, fog lights, = Additional Options and Accessories = - High beam headlights - Sun visor - Central lubrication system = Further Information = Tjdpfx Aszr Hmfefwsb Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Transmission Transmission: ZF, 16 gears, manual transmission Axle Configuration Axle configuration: 10x6 Front axle 1: Max. axle load: 9000 kg Front axle 2: Max. axle load: 9000 kg Rear axle 1: Max. axle load: 11,500 kg Rear axle 2: Max. axle load: 11,500 kg Rear axle 3: Max. axle load: 11,500 kg Weights Unladen weight: 18,970 kg Payload: 35,030 kg GVW (Gross Vehicle Weight): 54,000 kg Maintenance, History, and Condition APK (Technical Inspection): valid until 03/2027 Technical condition: good Visual condition: good Identification License plate: BT-RZ-64

Condition: used, mileage: 299,000 km, power: 132 kW (179.47 HP), first registration: 04/2004, fuel type: diesel, empty load weight: 6,570 kg, maximum load weight: 920 kg, overall weight: 7,490 kg, tire size: 225/75 17,5, tire condition: 80 %, axle configuration: 4x2, wheelbase: 4,900 mm, color: red, driver cabin: day cab, gearing type: automatic, emission class: euro3, suspension: steel-air, total length: 5,300 mm, loading space volume: 5 m³, loading space length: 5,300 mm, loading space width: 2,279 mm, loading space height: 470 mm, Year of construction: 2004, operating hours: 299,000 h, front tire size: 225/75 17,5, rear tire size: 225/75 17,5, Equipment: ABS, parking heater, sliding door, trailer coupling, truck registration, Reference number for inquiries: 809641 MAN LE 8.180 * Year of manufacture: 2004 * ABS (Anti-lock Braking System) * Trailer coupling * Power steering * Auxiliary heater (independent heating) * Radio/CD * Comfort suspension seat * Toolbox * Transmission: Automatic * Suspension: Leaf/Air * Gross vehicle weight: 7,490 kg * Unladen weight: 6,570 kg * Payload: 920 kg * Permissible gross weight: 7,490 kg * Tire condition, 1st axle: 80% -- 80% - Tire size: 225/75 R17.5 * Tire condition, 2nd axle: 80%|80% -- 80%|80% - Tire size: 225/75 R17.5 * Wheelbase: 4,900 mm * Tire sizes: 225/75 R17.5 Tjdpfx Aow Uppcofwjb * Internal dimensions: L = 5,300 mm, W = 2,279 mm, H = 470 mm * Internal volume*: 6 m³ * Pallet spaces: 13 Disclaimer: Subject to change, prior sale, and errors excepted. More pictures and videos can be found on our website. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing options * Application processing for all (export) documents * Ordering export and customs license plates * Vehicle preparation: new tarpaulins, lettering, painting etc. * Professional loading and load securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained specialist staff – we are happy to advise you.

Condition: good (used), Bosch Turbo Scara SR6 Swivel-Arm Robot The SR6/SR8 robot system consists of robust robot mechanics with four freely programmable axes. Thanks to its high speed and payload capacity (up to 8 kg), the robot is ideal for assembly work and fast pick-and-place movements. The turboscara SR6 and SR8 are swivel-arm robots (SCARA robots) with four axes and offer the following advantages: • Minimal cycle time with maximum precision • Large workspace and various strokes • Defined mechanical interfaces • PC control with diverse communication options • Complies with international standards • Brushless drive technology reduces repairs • Integrated user installation, optional: gripper for connecting a tool connector • Integration of safety technology (safety class 3) as standard • User power supply (24 V) in the control cabinet • The BAPS programming language is quick to learn and enables the creation of clear and understandable programs; New with BAPSplus: graphical user interface • Expandable via compact and flexible input/output modules: B~IO modules or decentralized CAN I/O modules • Expandable via the VTS02 valve block system with CAN connection for time-saving installation Technical specifications: Nominal load: 2 kg Maximum load: 8 kg Nominal moment of inertia: (axis 4) 500 kgcm² Maximum moment of inertia: (axis 4) 1000 kgcm² Horizontal force: continuous/max. 60/150 N Vertical force: continuous/max. 200/300 N Torque: (Axis 4) continuous/maximum 5/10 Nm Weight: 48.5 kg Maximum speeds SR6 Axis 1+2: 5.9 m/s Axis 1: 350 °/s Axis 2: 480 °/s Axis 3: (∅20 mm) 1600 mm/s Axis 3: (∅25 mm) 1200 mm/s Axis 4: 1200 °/s Cycle time (cycle 25-300-25): < 450 ms Including controller Controller consisting of the following components: Rexroth / MA4/200-7301-M / Robot Controller Module Rexroth RH04.0S Swivel range / Technical data see image Since this item is available multiple times and the robots have different Work tools these are only sample images and may vary. Item condition: Used (Subject to changes and errors in the technical data, information is subject to change!) In addition to approximately 50 paternosters, countless other machines such as presses, robots, ovens, industrial vacuum cleaners, etc. are available. A wealth of workshop equipment, workbenches, workshop trolleys, tools, forklifts, and shelving are available. A total of 24,000 m² of production space will be dismantled and sold. Please also note our other offers. The amount is due within 7 business days of purchase. Tedeiuzqtjpfx Afwjb You can find more items - new and used - in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 190 mm, travel distance Z-axis: 1,010 mm, controller manufacturer: FANUC, number of axes: 2, Horizontal turning machine manufactured in 2002. This Victor VTurn-26 features a maximum turning length of 1,000 mm and a turning diameter of 190 mm. It offers a Z-axis travel of 1,010 mm, providing versatility for various turning applications. If you are looking to get high-quality turning capabilities, consider the Victor VTurn-26 machine we have for sale. Contact us for further details. • TL = 1000 mm Technical Specification Tjdpfxozx Ak Hs Afwsb Counter Spindle No Driven Tools No

Condition: used, mileage: 166,472 km, power: 130 kW (176.75 HP), first registration: 10/2009, fuel type: diesel, empty load weight: 5,300 kg, maximum load weight: 3,100 kg, overall weight: 8,400 kg, tire size: 405/70 20, tire condition: 70 %, axle configuration: 4x4, color: yellow, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, Year of construction: 2009, operating hours: 166,472 h, front tire size: 405/70 20, rear tire size: 405/70 20, Equipment: ABS, all wheel drive, cabin, cruise control, differential lock, onboard computer, sliding door, trailer coupling, truck registration, Reference Number for inquiries: 41048 Unimog, U 4000 Crew Cab (Doka) * Year of manufacture: 2009 * ABS (Anti-lock Braking System) * Trailer coupling * Cabin * Power steering * Cruise control * On-board computer * Differential lock * Radio/CD Tedpfjyy H Etex Afweb * AdBlue tank * Transmission type: Telligent manual transmission * Suspension: Leaf spring front/rear * Gross vehicle weight: 8,400 kg * Unladen weight: 5,300 kg * Payload: 3,100 kg * Permissible total weight: 8,400 kg * Tire condition, front axle: 70% -- 70% - Tire size: 405/70 R20 * Tire condition, rear axle: 70% -- 70% - Tire size: 405/70 R20 * Tire sizes: 405/70 R20 all around * Unimog 437/25 U4000 * Double cab * Tires: 405/70 R20 Disclaimer: Modifications, prior sale, and errors excepted. Further images and videos available on our website. Our comprehensive range of services includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing * Application for all (export) documentation * Ordering export / customs license plates * Vehicle preparation: new tarpaulins, labeling, painting, etc. * Professional loading and load securing * TÜV inspections, registration service * Transfer of commercial vehicles Please consult our trained specialists—we are happy to advise you.

Condition: used, first registration: 08/1978, Year of construction: 1978, LAG 37 m³ slurry trailer with 6 chambers ! Newly refurbished for approx. €10,000, new brake system, new 3rd axle, new electrical system, new air suspension! Tedpowmpatsfx Afwsb • Aluminum body • 37,200-liter capacity • 6 chambers of 6,200 liters each • 6 dome covers • Direct discharge at the rear! • 3 x BPW air-suspended axles • Drum brakes • 385/65 R 22.5 tires - New MOT! - Ready for use! Subject to errors and prior sale!

Condition: ready for operation (used), WEG W22 motor with Karl Klein DNG 6-25/TS-300°C fan SN: 1612-302113, used, in good condition, fully functional, scope of delivery as per photos. Tjdpfx Afox Dwinoweb

Year of construction: 1987, condition: used, machine/vehicle number: 687 T, working width: 3050 mm metal sheet thickness: 6 mm throat: 200 mm rear stop: 1000 mm Tedpfx Afsb N Erbowsb power: 15 kW space needed: 4100 x 2300 x 2100 mm weight: 8500 kg