Used Energy-Saving Boiler Hertz 43 50 Kw 95 Degree Flow 3 Bar Pressure Buffer Tank 1000 Ltr. Oil Burner for sale (103,743)

Condition: ready for operation (used), Barmag A-406--0956 Beltro-Drive BDV433-0-19, serial number as shown in the photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Rcsdpfx Amoi D T Ewj Ted

Condition: new, Barmag A-406-0956 Beltro-Drive BDV433-OS-19, serial number as shown in the photo, unused, 100% functional, scope of delivery as per photos. Rjdpfx Asi D T Etom Tecd

Condition: good (used), Year of construction: 2004, more pieces industrial gas burners Oilon GP-80 H + double GasMultiBloc Dungs MB ZRDLE 420 B01 S20 +Dungs FRS 520 OILON GP-80 H Capacity: 350-1000KW established in 2005 Voltage: 230 / 400V 50HZ 2KW ip20 The controller LFL1.322 GAS drueck: min 20mbar / max 360mbar 62 kg Monoblock burner cast aluminum Electronic control panel is a signal diagram showing the different stages of combustion and alarms, allows you to keep constantly under control in the proper burner operation Flame type QRA2 Software relay LFL1.322 Gas train with an appropriate adapter is set on the side of the burner Adjustable burner flange Damper actuators Connect quick connector for the power cord Automatic termination of the air when the burner is switched off Seat and gas safety valves The reduction of the gas pressure regulator The differential air pressure switch Controller minimum gas pressure Rcjdpfscvkalsx Am Tjd Luc overall control.

Condition: excellent (used), For sale: a Getriebebau NORD gearmotor with a worm gear and a three-phase motor. The unit is fully functional, tested, and ready for operation. The technical condition is very good, with normal signs of wear and tear resulting from use. This gearmotor is ideally suited for driving conveyors, feeders, industrial machinery, mixers, and other devices requiring high torque at low speeds. Technical data: Gear manufacturer: Getriebebau NORD Gear type: 1S50VZ.71 L/4 Gear ratio: i = 35.00 Output speed: 40 rpm Motor manufacturer: NORD Motor type: SK 71L/4 Power: 0.37 kW Supply voltage: 230/400 V Δ/Y (50 Hz) 265/460 V Δ/Y (60 Hz) Rcjdpsznk U Esfx Am Tod Motor speed: 1360 rpm (50 Hz) 1630 rpm (60 Hz) Protection class: IP55 Insulation class: F Operating mode: S1

Condition: excellent (used), For sale: SEW-EURODRIVE R40DT71C2BMG/Z geared motor with a three-phase electric motor and integrated brake. The unit is fully functional, tested, and ready for operation. The technical and visual condition is good – normal signs of use resulting from operation are visible. This robust geared motor is ideally suited for driving industrial machinery, conveyors, feeders, mixers, and production lines. Technical specifications: Manufacturer: SEW-EURODRIVE Type: R40DT71C2BMG/Z Motor power: 0.37 kW Motor speed: 2700 rpm Output speed: 43 rpm Power supply: 230 V Δ / 400 V Y Frequency: 50 Hz Current: 1.65 / 0.96 A Cos φ: 0.91 Protection class: IP54 Insulation class: F Brake: 400 V AC Brake torque: 2.5 Nm Mounting position: IM B8 Redpjznd Niefx Am Tecd Weight: 19.24 kg Gear lubrication: Mineral oil CLP220 Country of manufacture: Germany

Condition: excellent (used), For sale: a Lenze GSN04-1NHAR worm gear motor with a WEG AL71-4 three-phase motor, 0.37 kW. The unit is fully functional, tested, and ready for operation. The gear motor is in good technical and visual condition. Only normal signs of wear are visible, consistent with its use. Thanks to its compact and robust design, it is ideally suited as a drive in industrial machines, conveyors, production lines, packaging equipment, and automation systems. The GSN04 series is a range of compact gear motors designed for applications requiring reliable power transmission. Technical data: Gearbox manufacturer: Lenze Gearbox model: GSN04-1NHAR Motor manufacturer: WEG Motor type: AL71-4 Power: 0.37 kW Power supply: 3× 220–240 V Δ / 380–415 V Y, 50 Hz Motor speed: 1370 rpm Output speed: 140 rpm Gear ratio: i = 10 Output torque: 22 Nm Protection class: IP55 Insulation class: F Operating mode: S1 (continuous operation) Rjdpfszmyybex Am Tocd The scope of supply includes exactly what is shown in the pictures.

Condition: good (used), Pressure gauge, test pressure gauge, Bourdon tube pressure gauge, pressure-temperature measurement technology, measuring hose, hydraulic hose, connection cable for pressure gauge, Measuring hose for pressure gauge -Manufacturer: Nylaflow, measuring hose connection hose for pressure gauge -Type: QC 649 04 630 bar -Length: 450 mm Rjdjv Rnrdspfx Am Tocd -Screw connection: see photos -Number: 115x measuring hose available -Price: per piece / from 2 pieces 12,- €/piece / from 10 pieces 10,- €/piece -Weight: 0.1 kg/piece

Condition: excellent (used), I am offering a high-quality compact hydraulic power pack from the renowned brand DANA / Brevini Fluid Power. The unit is in excellent technical condition and ready for immediate use. Rcodpfxsy H Nn Re Am Tod An ideal solution for industrial, mobile, and service applications. ⚙️ Technical specifications: Manufacturer: Dana SAC Germany GmbH / Brevini Year of manufacture: 01/2023 Power supply: 12V DC Motor power: 0.7 kW Current: 100A Speed: 3100 RPM Torque: 2 Nm Pump displacement: 0.56 cm³/rev Maximum pressure: 190 bar Tank capacity: 2 liters Protection class: IP54 Duty cycle: S3 (10%) Rotation direction: CCW (counterclockwise) 🔩 Equipment included: - Brevini hydraulic solenoid valves - Valve block (manifold) - Hydraulic quick couplings - Complete 12V electric motor - Oil reservoir - Wiring harness + multipin connector 📦 Applications: These power packs are used, among others, in: - Lifts and hoists - Trailers and tippers - Industrial machinery - Mobile hydraulic systems - Automation and special equipment 🧠 Additional information: - Compact and highly efficient hydraulic unit - Dana/Brevini brand = high quality and durability - Suitable for operation in demanding conditions

Condition: excellent (used), Year of construction: 2007, For sale is a functional and very well-maintained oil burner from the brand Weishaupt, model WM-GL10 – it only ran on oil, therefore it does not have a gas line. Rjdsy Uvhtspfx Am Tscd 1. Burner type: WM-L10/3-A Output: 110 - 1000 kW 15 - 84 kg/h Design: ZM-T Year of manufacture: 2007 2. For sale is a functional and very well-maintained oil burner from the brand Weishaupt, model RL3-A. Burner type: RL3-A Output: 120 - 775 kW 10 - 65 kg/h Design: ZMD Year of manufacture: 2002

Condition: excellent (used), I offer robust centrifugal fans (blowers) in excellent condition – equipment is virtually unused. Perfect for industrial applications, ventilation, extraction, filtration systems or workshop installations. ⚙️ Technical data (from the nameplate) Power: 0.75 kW (1 HP) Rjdpfx Amjyypgts Tjcd Supply: 3-phase 200/400V Frequency: 50 Hz Speed: ~1395 rpm Protection rating: IP54 Motor type: TECO 3-phase induction motor 📏 Dimensions (approximate) Inlet diameter: approx. 24–25 cm Construction: steel housing + metal impeller ✅ Advantages ✔ condition very close to new ✔ solid industrial build quality ✔ efficient 3-phase motor ✔ compact size ✔ ideal for dust, chip extraction, and ventilation systems - PRICE INDICATED PER UNIT.

Condition: used, Baumüller frequency inverter 55-88 kW, BUM63A-150- removed from Krauss Maffei KM 18 C3 - removed from running machine - fully functionalmanufacturer: Baumüller Nuremberg type: BUM63A-150 spare part no.: 6443081 manufacturer no.: 345449 Dition: gebraucht Rcsdpfx Aoltrpzjm Tjd

Condition: new, power: 140 kW (190.35 HP), fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: automatic, number of seats: 3, loading space length: 3,200 mm, loading space width: 2,150 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, The ISUZU commercial vehicle center in Germany offers you expertise, service, and consulting: New ISUZU M30 F AT truck with a GVWR of 7,490 kg or 8,500 kg equipped with a roll-off tipper, water tank with a capacity of 4,250 liters, and a 5 m spray boom. IMMEDIATELY AVAILABLE!!! 2-year warranty on the base vehicle from the date of initial registration. Equipment: - 5.2 L turbo diesel engine with common rail direct injection, 140 kW / 190 hp, EURO VI OBD-E - Automated manual transmission (NEES II) with 6 gears, torque converter, and cruise control. The integrated hydrodynamic converter enables smooth and precisely controlled starts! The gears can also be shifted manually in sequential mode using the gear selector lever. - Engine brake, electric parking brake with Auto Hold, Hill Start Assist (HSA) - Diesel tank 100 L / AdBlue tank 16 L - BI-LED lighting with headlight cleaning system and rear LED lighting. - Suspended driver's seat - Double passenger seat bench, 3-seater, headrests, seat belt warning - Driver and passenger airbags, seat belt pretensioners for driver and passenger - Height and tilt adjustable steering wheel, interior mirror - Electric windows, electric and heated exterior mirrors - Immobilizer - Double-DIN DAB+ radio 6.8" with Bluetooth hands-free system, compatible with Apple CarPlay/Android Auto, USB charging port - Driver information display 7" - Steering wheel controls - Fog lights, daytime running lights, automatic lighting control - Central locking with remote control - Air conditioning - Digital EU tachograph - Auxiliary drive - Safety Pack 2 equipment Vehicle superstructure: - CTS 05-28 telescopic roll-off tipper Hook height 900 mm, pivoting hook arm, operated via control panel with remote control Pulling force 5,000 kg Rcsdjyn Tq Djpfx Am Tsd Hydraulic locking of the roll-off tipper, automatic mechanical hook locking, load holding valves on all hydraulic cylinders, emergency stop function Side and rear underrun protection Single-circuit hydraulic system complete with hydraulic pump, oil tank, and lines Additional vehicle equipment: Vehicle underbody and chassis preservation Ball hitch, 3.5 t trailer load Warning markings, red-white, 1 set = 4 pieces LED light bar with 2 RUL 900 mm 2 dust boxes mounted on the chassis Engine-mounted hydraulic system, 55 L oil tank with return flow filter and level indicator, oil cooler with temperature-controlled fan Armrest, driver's seat HILLTIP Quick-Hitch quick-release system for spray boom (snow plow) Attachments: Fiedler irrigation system FTS 4250/5 and FGA 1000 for professional irrigation work - Tank system with a total capacity of 4,250 liters - Standard filling via C connection - Surcharge for special black color for FTS tanks - Low-pressure pump, hydraulic, with dry-run protection - Free flow path for C connection The water is filled into the tanks from above, so no water can escape from the tank into the supply network during filling. !! Legal requirement for drawing from public supply networks !! - Automatic low-pressure hose reel, stainless steel, with 25 m 3/4" hose - Telescopic hand-held spray lance (low pressure), extendable from 0.90 m to 1.55 m - LED warning lights (2 pieces) on the water tank - Water level sensor, display of the current fill level in the display - Shut-off valve with flow control - Mounted on the roll-off frame - FGA1000 Hybrid spray boom - Positioning automatic (Memory function > automatically moves to the position of the last spraying point and simultaneously a

Condition: ready for operation (used), Heidenhain UM 114 325 005-01 Serial number: 10185195, professionally overhauled and tested with 3 months warranty, in good condition, 100% functional, delivery contents as shown in the photos. Rcjdpfx Ajx Etdtom Tjd

Condition: used, mileage: 816,000 km, power: 324 kW (440.52 HP), first registration: 09/2009, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro5, Year of construction: 2009, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * MAN TGS 18.400 4x2 BL tanker truck * Automatic transmission * Willig body from 2008 * Euro 5 * 13,500 litres * Haar pump * Sening Mutlifow counter * 2x discharge hoses * Additive system 40L * 2 compartments * 6,000L / 7,500L * Top/bottom filling * Intarder * Local distribution cab * Trailer hitch * Rear view camera * Alcoa aluminium rims Rcodeyf S Rwjpfx Am Tsd * Auxiliary heater * Air conditioning * Heated seats * PTO (power take-off) * Leaf-air suspension * Radio/CD * 1st owner * Automatic transmission * 2 units available * Next tank inspection 09/26 * Leak and function test 09/29

Condition: used, mileage: 475,827 km, power: 257 kW (349.42 HP), first registration: 08/2006, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 12/2026, color: white, gearing type: automatic, emission class: euro3, Equipment: ABS, air conditioning, * Sun visor * ABS * ASR * Radio * Cruise control * Electric windows * Electrically adjustable mirrors * Heated mirrors * Fog lights * Sunroof * Driver's comfort seat * Seat heating * Differential lock, rear axle * Air intake, top-mounted * Air dryer * Trailer coupling * Duomatik air connection Redpfxozb Sd Ao Am Tocd * 12-speed * Suspension: leaf spring/air suspension * Payload: 9590 * Continuous brake: electronically controlled engine brake ----Body: Esterer tank body (year of manufacture 2006), GGVS/ADR Class 3 for diesel and heating oil, capacity 13,450 liters, 2 compartments (6,680 + 6,770 liters), tank material Elongal, next tank inspection L 12/26, P 12/29. Pump: Sening beta 2 (800 ltr/min, temperature/flow converter (TKZ) TMM Sening MultiFlow, gas measurement preventer Sening GMVTD 805 (40-800 ltr/min), remote control. 1 empty hose, nominal diameter 80 mm, 2 x full hoses, nominal diameter 38 mm, length 70/25 meters, additive system, Epson receipt printer, special trailer coupling. Sale only to commercial businesses. IN CASE OF EXPORT, ONLY THE NET PRICE IS TO BE PAID!!!!! ALL INFORMATION WITHOUT GUARANTEE REGARDING EQUIPMENT AND ACCESSORIES. Our general terms and conditions (see legal notice) form the basis for all purchase contracts, invoices, proforma invoices, orders, and sales negotiations.

Condition: new, Year of construction: 2025, functionality: fully functional, operating pressure: 120 bar, high-pressure hose length: 10,000 mm, pressure: 150 bar, empty load weight: 40 kg, warranty duration: 24 months, input frequency: 230 Hz, SPECIFICATION: Model: KPC-3.5P Code: K8.011.0051 Voltage/Hz: 230/50 Pressure (Bar): 120/150 max Flow Rate (L/h): 660 Power (W): 3000 Motor: Induction RPM: 1450 Redpjw Icciefx Am Tocd PREMIUM CRANKSHAFT PUMP BRASS HEAD WITH INTEGRATED BYPASS VALVE 18 mm CERAMIC PISTONS STAINLESS STEEL INLET AND OUTLET VALVES INDUCTION MOTOR WITH THERMAL PROTECTION AND COPPER WINDINGS STOP&GO FUNCTION EQUIPPED WITH PROFESSIONAL ACCESSORIES FEATURING 4 NOZZLES WITH DIFFERENT SPRAY ANGLES FOR REMOVING ALL TYPES OF CONTAMINANTS AND SURFACES INCLUDES A PRACTICAL ACCESSORY HOLDER AND A PROFESSIONAL BRAIDED HOSE Why choose a crankshaft pump with ceramic pistons? - The crankshaft pump is a solution renowned in industrial applications. Its robust design ensures a significantly longer service life compared to more affordable washers equipped with axial or rotary pumps. - Ceramic pistons offer exceptional resistance to high temperatures and wear, providing reliable and quiet operation for years. - Thanks to this construction, the unit can be used in continuous operation mode without the risk of overheating or excessive component wear.

Condition: refurbished (used), Year of construction: 2025, Schaudt PF43 1000/1750 Grinding length: 1,000 / 1,750 mm Center height: 150 mm Workpiece weight: 200 kg (optionally more) Rcodpjfg Ta Ujfx Am Tod Additional options available for selection: - Completely new control cabinet with Siemens Sinumerik One or Fanuc 0iTF-Plus control - Fast setup via GSN operator interface - Diatronic measuring system - B-axis with free positioning - Second external grinding wheel - Internal grinding unit - Center height adjustment - Dressing spindle for diamond form wheel - Balancing and finishing sensors - Hydraulic clamping/releasing of the tailstock - Automatic Siemens door drive - 19" / 22" screen - Remote maintenance - Conversion to needle nozzles - Matching coolant/extraction system - Automation preparation - and more We can also overhaul your existing grinding machine! Schaudt / Studer / Kellenberger / Bahmüller / Voumard / Overbeck / Fortuna / Tacchella and more.

Condition: excellent (used), Year of construction: 2017, operating hours: 36,000 h, functionality: fully functional, overall weight: 1,890 kg, total length: 2,200 mm, total width: 1,420 mm, total height: 2,050 mm, motor manufacturer: Garden Denver, power: 75 kW (101.97 HP), fuel type: electric, volume flow: 684 m³/h, operating pressure: 10 bar, type of cooling: water, Equipment: type plate available, Oil-free screw compressor PUREAIR Compair D75HRS 10A 75kw 10 bar 11.4m3/min with frequency converter CompAir D75HRS-10 oil-free, water-injected, Dryclon series frequency converter screw compressor With its 75 kW engine power, it reaches a capacity of 10,320 l/min. The 10 atmosphere operating pressure ensures stable and clean compression, making it ideal for use in areas where air cleanliness plays a key role. COMPAIR D75HRS screw compressor fully serviced, for sale in excellent condition oil-free design, direct drive, controlled by frequency converter. Regulated speed - air and water cooled 75 kW power, air flow: 11.4 m3/min /684 m3/h Built-in frequency converter: Manufacturer: Compair D75HRS 10A Year of manufacture: 2017.12 hours: 36000 Drive power: 75 kW Pressure 10 bar Flow rate: 11.4/min Rcodpfx Amsw Rcgts Tjd Delco XL controller Main rotor speed: 2980 Voltage: 400 V 50 Hz 3 phase current consumption: 128 A Machine weight: 1890 kg Dimensions: 225 long 142 wide 205 high. If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: new, Year of construction: 2025, machine/vehicle number: H02F1Q0001, motor manufacturer: Battery System: LiFePO4, Field of application: Construction Empty weight: 670 kg Generator capacity: 15 kVA Dimensions of cargo space: 104 x 109 x 116 cm CE mark: yes Frequency: 50/60 Voltage: 400 Drill equipment: Battery, Control Panel Please contact Team DPX for more information = Additional options and accessories = Rsdpfx Asxmwmrjm Tocd - Battery - Control Panel

Condition: new, Year of construction: 2025, power: 45 kW (61.18 HP), motor manufacturer: Yunnei / DEF30CAA5, General information Field of application: Construction Weights Empty weight: 2.800 kg Functional Generator capacity: 45 kVA Dimensions of cargo space: 250 x 115 x 200 cm CE mark: yes Other information Generator: Stamford Frequency: 50 Rcedpfx Ameuidyve Tod Voltage: 400 Drill equipment: Tank, Battery, Control Panel Water tank volume: 150 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Tank

Condition: used, Year of construction: 2020, Orangeworks Stainless Steel Mixer Tank Qty 2 in stock Capacity 500 LTS Load cells Mixer Ancillary equipment included Rcodewq Sz Uopfx Am Ted

Condition: new, functionality: fully functional, Year of construction: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, High-strength welding bed Partitioned smoke extraction system Fully automatic butter injection system Fully automatic cutting, material saving, fast speed Cutting area 4000 × 2000 mm X‑axis travel 1520 mm Y‑axis travel 4020 mm Z‑axis travel 80 mm Max. combined positioning speed 170 m/min Rsdpsw A Iilsfx Am Tocd Acceleration 2.8 G Machine dimensions (L×W×H) 9500 × 2900 × 2380 mm Footprint 10500 × 3400 mm Net weight 8500 kg

Condition: excellent (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, Equipment: documentation/manual, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 21200 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm Rcjdpfx Asgrzh Ejm Tjd platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Year of construction: 2025, condition: used, New: Yes Empty weight: 2.250 kg Dimensions of cargo space: 245 x 140 x 200 cm CE mark: yes Rsdsxuzupopfx Am Tocd Serial number: 2002005 Please contact Team DPX for more information

Year of construction: 2025, condition: refurbished (used), Complete peeling line WDHF35/50/75 AS NEW, will be supplied revamped & tested in our workshop. Function and h9 tolerance guaranteed. Working range Entry diameter: 7 - 38 mm Finishing diameter: 6 - 35 mm Bar length min.: 2,9 m (3,2 m at max. feeding speed) Bar length max.: 6,5 m Feeding speed: 4 - 50 m/min progressively adjustable Cutting head RPM: 675 / 1330 / 4500 rpm progressively adjustable Scope of supply KIESERLING WDHF 35/50/75 as described above, composed by: - Entry roll conveyor - Feeding rolls - Peeling machine - Exit carriage - New output pinch-roll - Exit channel - Revamping in our workshop - New hydraulic system - New lubrication system - New pneumatic - New electrical equipments - New complete set of tooling & consumables SAAR-HARTMETALL - Optionnal: Laser diameter control system for tool correction Entry diameter: 7 - 38 mm Finishing diameter: 6 - 35 mm Minimum bar length: 2,9 m (3,2 m at max. feeding speed) Maximum bar length: 6,5 m Feeding speed: 4 - 50 m/min progressively adjustable Cutting head RPM: 675 / 1330 / 4500 rpm progressively adjustable Rodpfx Amjymb Uue Tocd