Used Ess Wire Feed Case for sale (24,815)

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks. Isdpfx Adsdzqmzjketg

Condition: used, Single-column eccentric press EBU Type 75 SKU Machine no. No. P 4598462 Year of construction 1962 Compressive force 75 ton. throat depth 300 mm Table surface 800 x 620 mm waste hole 325 x 225 mm Isdpedzqltefx Adketg Plunger surface 470 x 180 mm Clamping pin bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Plunger adjustment 80 mm Installation height max. approx. 420 mm Stroke rate 60 + 105 strokes/min. Motor power 4 kW Mains connection 380 Volt, 50 Hz. - Pneumatic clutch/brake combination EBU - Overload protection with breaker plate in ram - UNIDOR tool monitoring system, type APS MINI - mechanically driven gripper feed with belt straightener OSTERKAMP, type ZPN 200/350 - strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds due to 2 V-belt stages on the wheel transmission - Two-handed operation - Simple work area shielding for swinging open - Table height adjustment in lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and control panel for tool monitoring adjacent - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons good condition

Condition: new, ABEL air feed fitting on the pressure side for piston diaphragm high-pressure pumps. Iodpjiyp Tzefx Adkjtg NEW ! We are your ABEL pump supplier, service and spare parts partner for ABEL pumps. Pumps and spare parts available from stock or at short notice.

Condition: new, Year of construction: 2026, Dimensions (L/W/H) 1400x2450x2800 mm Total pressure 400 to Ijdpfxjyk H Tws Adkotg weight of the machine ca. 12000 kg

Year of construction: 2016, condition: ready for operation (used), The Coiltech Decoiler Straightener Feeder System is a compact press feeding system. Belt width: 600mm, material thickness: up to 6.5mm, straightening rollers: 7x115mm, decoiler tonnage: 6000kg, diameter (inner), min-max: 470-520mm. Connected load: 7.5kW, with documentation. Ijdpfxoi El Ucj Adkjtg

Condition: new, Year of construction: 2026, The dual wire feeder has been designed to increase the efficiency and quality of welding processes in the most demanding industrial environments. Thanks to its innovative design that allows the use of two different types of welding wires, this feeder is the ideal solution for CORMAK laser welding machines, offering users a number of benefits. Dual wire feeder for CORMAK laser welding machines The dual wire feeder is the choice that allows for significant improvement in work standards, while offering the flexibility, efficiency and reliability necessary in modern production processes. This solution meets the expectations of even the most demanding users looking for ways to optimize their IMPROVED PRODUCTIVITY - The dual wire feeder reduces machine downtime associated with spool changes, contributing to faster and more efficient production cycles. VERSATILITY - The dual wire feeder allows for quick adaptation to changing project requirements. PROCESS OPTIMIZATION - Users can easily switch between wires with different diameters or properties to tailor the welding process to specific tasks, ensuring high weld quality and work efficiency. IMPROVED WELD QUALITY - By allowing for dual wire to weld material, the feeder provides better alignment at larger gaps, resulting in longer lasting and cleaner welds. Ijdpfx Adjwl Ewxokstg REDUCE OPERATING COSTS - Long-term benefits such as reduced downtime and improved work efficiency allow for significant savings.

Condition: used, Year of construction: 2009, machine/vehicle number: 312002, Buchdeckenmaschine - Bucheinhängemaschine - Case maker - Crease and Presser Horizon HCM-1/ HCP-1Year 2009 - HCM-1/HCP-1 Serial-No. 312002 Isdpsh Axdaefx Adkotg Book Block size min. 133.7x136.7mm, max. 297 x 215,9mm Cover Material min. 169.7x322x4mm, max. 333x502.8mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1981, machine/vehicle number: 9, Anpapp-Presse und Falzeinbrennmaschine Schmedt PräForm HHS 20 Case Press and Joint-Setting machine Schmedt PräForm HHS 20 Baujahr / Year 02/1981 - Serial-Nr. 09 Buchhöhe / Book height: 100 - 520mm Buchbreite / Block width: 120 - 400mm Blockstärke / Block tickness:: 8 - 100mm Leistung / Output: ca. 150 St/h Pressluftanschluss / Air supply: 6bar Elektrischer Anschluss / Power supply: 230V / 50Hz / 2.0kW Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Itedsrmul Dopfx Adkog On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2000, machine/vehicle number: 124, Falzeinbrenn- und Abpressmaschine - Book press and joint-setting machine Zechini CIMATICYear 2000 - Serial-No. 124/00 Buch Format max. Buchhöhe 48cm x Buchbreite 35cm x Buchblockstärke 9cm Book Size max. height 48cm x width 35cm x thickness 9cm Leistung max 150 in St./h / Output 150 pcs/h Pressluftanschluss 6 bar / Air pressure supply 6 bar Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Itjdpjh Ayanofx Adkjg

Condition: used, Casing-In / Bucheinhängemaschine - Buchformpresse / Book Forming Press Kolbus EMP - FE Year 1966 Block size min. 125 x 100 x 6mm / max. 370 x 270 x 80mm Case size min. 125 x 210mm / max. 370 x 62 mm Speed up to 36 cycles per minute Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Ijdpfovuaqyjx Adkstg

Condition: used, Die PräForm ist eine Maschine zum Einpressen von Büchern nach dem Einhängen und dem gleichzeitigem Iedsxgi Hqepfx Adkjtg Einbrennen des Falzes. The PräForm is a machine to press books after casing-in, setting the joint at the same time and processes single books just as well as series of books.  Anpapp-Presse und Falzeinbrennmaschine Schmedt PräForm HHS 2100 Case Press and Joint-Setting machine Schmedt PräForm HHS 2100 Baujahr / Year Serial-Nr. 77 Buchhöhe / Book height: 100 - 520mm Buchbreite / Block width: 120 - 400mm Blockstärke / Block tickness:: 8 - 100mm Leistung / Output: ca. 150 St/h Pressluftanschluss / Air supply: 6bar Elektrischer Anschluss / Power supply: 230V / 50Hz / 2.0kW Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, MIG/MAG hose package for robots Itsdpjfdd A Djfx Adkog -Hose package with: wire feed for robots or automatic welding machines -Length: 3.4 m -Water cooled -Weight: 5.5 kg

Condition: used, Stainless steel dosing screw, feed screw conveyor, auger Equipped with additional feed hopper with aluminium lid Screw diameter: 200 mm Motor power: 3 kW, 36 rpm Itodpfx Ajx Nzu Uodkeg Total length: 1730 mm See our other listings VMA Wekerom

Condition: used, Year of construction: 1976, wire diameter: 3,0 - 5,5 mm nail length: 15 - 80 (100) mm output: 300 St./min. Ijdpfxskk Exo Adketg

Condition: as good as new (ex-display), Year of construction: 2024, Technical data: Slat carcass press from our showroom; Working range: width from 150 - 2.550mm, height from 150 - 1.400mm; depth from 150 - 700mm; Variable pressing force adjustment 300/700/1100/1400/1800/2200 dN(kg) of the lateral pressing beam; Variable pressing force adjustment 500/800/1200/1500/1900/2200 dN(kg) of the upper pressing bar Itedpfx Adeb Eln Dekeg Simple operation via 6 separate push buttons, Freely adjustable pressing time preselection with automatic opening, Charging height 300 mm Machine is in our showroom and can be delivered immediately. Location: ex stock 54634 Bitburg

Condition: good (used), MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch Iodpfx Adex I Icvjkjtg -Manufacturer: Dinse, hose package with water-cooled wire feeder -Type: DIX MPZ -Length: 8 m -Connector: 5-pin -Transport dimensions: 600/500/H130 mm -Weight: 6 kg

Condition: good (used), MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch -Manufacturer: Dinse, hose package with water-cooled wire feeder -Type: DIX MPZ -Length: 8 m Itodpex I H Rxjfx Adkeg -Connector: 5-pin -Transport dimensions: 590/500/H150 mm -Weight: 8.3 kg

Condition: good (used), MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch -Manufacturer: Dinse, hose package with water-cooled wire feeder Itedpfx Adsx I E U Aekog -Type: DIX MPZ 2-304 -Length: 8.5 m -Connector: 5-pin -Transport dimensions: 580/450/H130 mm -Weight: 7.1 kg

Condition: good (used), MIG/MAG hose package for robot -Hose package with: wire feeder for robots or welding machines -Length: 2.5 m -Water cooled Ijdpfxofc T Tus Adketg -Number: 2 wire feeders available -Price: per piece -Weight: 5.5 kg

Condition: excellent (used), Year of construction: 2008, For sale: Hydraulic through-feed press JOOS DLP 240/OK Machine type: Hydraulic through-feed press with automatic feeding and unloading of elements. Application: Designed for coating flat panel materials of uniform thickness using coating material under elevated temperature. Basic data: Manufacturer: JOOS Model: DLP 240/OK Year of manufacture: 2008 Operating voltage: 400 V / 50 Hz Power consumption: 55.5 kW Hydraulic cylinders: 8 × 125 mm + 2 × 40 mm Operating pressure: 245 bar Pressing surface: 4200 × 1400 mm (L × W) Isdjyc Eukspfx Adketg Total pressing force: 2400 kN Condition: very good Documentation: complete Important note: The machine does NOT have a control program. TAG: hydraulic press, through-feed press, industrial press, coating press, panel processing machine, production line equipment, industrial machinery, JOOS, Siempelkamp, Orma, Italpresse, Dieffenbacher, Bürkle, Langzauner

Condition: excellent (used), Year of construction: 1993, machine/vehicle number: 221/93, functionality: fully functional, Connection value 380V 16A Pneumatic connection 6 bar Total length of the machine 4300 mm Total machine width 1300 mm maximum pressing length 2650 mm Press width 1000 mm Itedpfxok Tzwds Adksg Press height 1000 mm Press pressure up to 150 bar electrical width adjustment with digital display Footswitch for pressing

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 11001257, Scansonic ALO3-DYD2W-1.7 – Laser Processing Head / Laser Optics with Fronius Drive Wire Feeder Manufacturer: Scansonic Model: ALO3-DYD2W-1.7 Serial Number: 11001257 Date of Manufacture: 2018/02 Material/Assembly Code: KG0033-020-BA Condition: Used, very good technical condition Description: The Scansonic ALO3-DYD2W-1.7 is a laser processing head from the ALO3 series, designed for high-precision laser joining processes. Thanks to its compact design and high repeatability, it is ideally suited for: - Laser welding - Laser hybrid welding (Laser + MIG/MAG) - Laser brazing - Robot-based precision applications The ALO3 series is used worldwide in the automotive and supplier industries and offers: - Excellent seam tracking - Robust mechanics for 24/7 industrial operation - Precise process monitoring - High compatibility with CO₂, Nd:YAG, and fiber lasers This ALO3-DYD2W-1.7 model is a variant with specific focus/optic parameters (1.7), optimized for certain welding or joining processes. Technical Data (according to nameplate & product family) Type: ALO3-DYD2W-1.7 Serial Number: 11001257 Year of Manufacture: 2015 Patent Numbers: DE 1000685 US 6,596,962 EP 11 25 672 Robust industrial optics for laser processing Compatible with leading robot manufacturers (e.g. KUKA, ABB, Fanuc) Areas of Application: Automotive industry / Body-in-white production Iodjx H S Slepfx Adketg Serial laser joining processes Aluminum and steel connections Welding in robotic applications Precision seam tracking with adaptive control (enabled by Scansonic systems) Condition: Removed from running operation Visually clean Mechanically fully functional Serial number and optic parameters clearly legible Scope of Delivery: - Scansonic ALO3-DYD2W-1.7 laser processing head - Fronius Drive wire feeder

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5500x4000x2250 mm Iedpfov A Hlmsx Adkstg Weight 8000 kg Total power requirement 45 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 8500x1800x2150 mm Iodpfxov A Hkcs Adkstg Weight 6000 kg Total power requirement 10 kw

Condition: new, Made in Italy. Center height: 300 mm Turning diameter over bed: 600 mm turning diameter over slide: 380 mm center width: 1.500 mm bed width: 400 mm spindle bore: 82 mm spindle nose: Camlock 8" Spindle speeds: (12) 16 - 1200 rpm motor power: 9,2 kW (special equipment / standard: 7,5 kW) feed Z-axis: (93) 0,028 - 6,43 mm/rev feed X-axis: (93) 0,012 - 2,73 mm/rev Thread, metric: (54) 0.5 - 224 mm Thread, Witworth: (55) 72 - 1/8 TPI Thread, modular: (54) 0.5 - 112 mm Thread, Diametral Pitch: (54) 64 - 1/4 D.P. Cross slide stroke: 340 mm Top slide stroke: 150 mm Tailstock quill diameter: 85 mm Tailstock quill stroke: 200 mm Tailstock taper: MK 5 Weight: approx. 3,200 kg Equipment: - 3-axis digital display - Automatic lubrication of the guideways - LED illumination - Micrometer bed stop - 9.2 kW motor instead of 7.5 kW - Quick change holder system Multifix with 4 inserts - Tailstock movement pneumatically assisted - Mechanical double clutch - Electromagnetic brake - Rapid traverse for X- and Z-axis Iedpfx Aed Nk Ncsdkstg - Electrical equipment from high quality brand components e.g. Siemens/Schneider - Lubrication of the guideways via hand pump - Reducing sleeve - 2 fixed center punches - All safety devices according to CE standards: Rotary chuck guard with plexiglass disc, micro limit switch secured. Rotating chuck guard with Plexiglas disc. Rear splash guard along the entire length. Lead screw and pull screw protection by light barrier (integrated in emergency stop circuit). Emergency stop pushbutton. - Swarf container on wheels - Electric coolant device - fixed steady rest - travelling steady rest - operating tool, acceptance protocol according to DIN, operating and maintenance manual, complete electrical installation, machine manufactured according to CE standard in the latest version EMO special price incl. 3-axis digital display.