Used Fuchs Material Handling Machine for sale (76,476)

Condition: refurbished (used), functionality: fully functional, Year of construction: 2007, - Machine in very good technical and visual condition, completely overhauled - Immediately available - Wide range of additional attachments available Gsdpjy I Ubxofx Aagjbn

Condition: excellent (used), functionality: fully functional, power: 160 kW (217.54 HP), fuel type: electric, maximum load weight: 48,800 kg, lifting height: 18,000 mm, Year of construction: 2012, Fuchs Terex RHL860D – Electric Material Handling / Loading Equipment Gedpfx Aaoyf Nnyogjbn We offer this excellent-condition, ready-to-work Fuchs Terex unit. Manufacturer: Fuchs Terex Model: RHL860D Year of Manufacture: 2012 Condition: Very good This machine is fully electric driven, offering significant operational and environmental advantages: Key Advantages of Electric Drive: Zero CO₂ emissions Low noise levels with high-torque electric motors Minimal heat generation Future-proof drive technology Low maintenance and operating costs Comprehensive monitoring of power supply quality and machine grounding Designed for 24/7 operation Large working radius, expandable with optional cable drums or power packs An ideal solution for efficient, sustainable, and continuous material handling operations. Shipping assistance available from the Port of HaminaKotka, Finland. An electric excavator is well suited for this type of application, where the need for relocation is minimal. When necessary, the machine can be driven to the maintenance hall using a dedicated power cable. Compared to an internal combustion engine, the electric motor is largely maintenance-free. Another major advantage of electric power is that fuel does not gel even in severe cold conditions. During cold periods, the hydraulic system is kept continuously running, ensuring that the hydraulic oils remain warm. The Terex Fuchs contains 700 liters of hydraulic oil, and oil change intervals are determined through oil sample analysis. A significant reduction in operating costs is achieved through electric operation, which is considerably cheaper than diesel. The power supply comes from the factory network at 690 volts, which is stepped down on the machine to the Terex Fuchs operating voltage of 400 volts. The electric motor driving the hydraulics has an output of 160 kW. The pump delivers nearly 500 liters per minute at a pressure of 360 bar. Power to the pump is supplied according to the oil demand of the hydraulic consumers, which reduces overall power requirements.

Condition: excellent (used), fuel type: diesel, color: green, Year of construction: 2021, operating hours: 4,550 h, General information Year of manufacture: 2021 Field of application: Construction Serial number: 818.0.2803 Technical information Number of cylinders: 1 Empty weight: 19.000 kg Functional Mast length: 9 m Condition Technical condition: very good Visual appearance: very good Financial information Price: On request Warranty Warranty: Sennebogen 818E K9 ULM Nice Sennebogen with low hours. sorting grab optional. For more information please contact us. Gbjdpfoyz Direx Aagsn Other information Emissions class: Stage V Additional information Please contact Ferdinand Pater for more information

Condition: used, functionality: fully functional, Year of construction: 2018, Machine in good technical condition; with generator; immediately available; wide range of additional attachments available. Gbsdpfx Ajy Dtarjagon

Condition: used, functionality: fully functional, Year of construction: 2008, - Machine in very good technical and visual condition - Immediately available Godjy Dc Nvepfx Aagobn - Sale includes: - Scrap shear: Zato FCE40 or Genesis GXP400R - Boom - Additional attachments available at extra cost

Condition: good (used), functionality: fully functional, Year of construction: 2012, Machine in good technical and visual condition; immediately available; wide range of additional attachments also available. Gedoy Dc Avjpfx Aagsbn

Condition: refurbished (used), functionality: fully functional, overall weight: 100,100 kg, Year of construction: 2010, - 24 m reach - Machine in very good technical and visual condition Gjdey A Tffspfx Aagsbn - Immediately available

Condition: used, Year of construction: 2014, Sennebogen material handler 835    • 11,376 operating hours    • 6-cylinder water-cooled engine    • Dutch machine    • Equipped with central lubrication    • Solid rubber tires    • 4 stabilizers    • Cameras for all-round visibility Gsdpsyfx Shjfx Aagjbn    • Joystick control    • 2 units available! Condition: Used Year of manufacture: 2014

Condition: used, Year of construction: 2010, LIEBHERR R954C EW-783 – OVERHAULED WITH WARRANTY Year of manufacture: 2010 Engine: LIEBHERR TIER 3 Operating weight: 69,000 kg Reinforced underbody protection Extra wide undercarriage Track pads: 600 mm Slew ring housing Catwalk Radio installation Automatic climate control Idle automatic Central lubrication system Gjdpfx Aasyxdxbjgjbn Top guard (FOPS) Front guard (ROPS) Xenon auxiliary headlights Headlight guard at the front Cab with bulletproof glass (front and roof window) Sun visor Air-suspended driver's seat Positioning and slew brake Hydraulically height-adjustable cab End-position cushioning, boom and stick cylinders Industrial mono boom 11.50 m (11.50 m with end-position cushioning, with load-holding valve) Hoist cylinder with load-holding valve Industrial bent stick 9.00 m Stick cylinder with load-holding valve Xenon spotlight installation (on the boom)

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 8,700 h, Caterpillar MH3024 material handler (wheeled excavator) Year of manufacture: 2019 Operating hours: 8,700 mth Gbjdeyx Igvspfx Aagon Technical condition: very good – serviced by an authorized Caterpillar service center Available immediately

Condition: used, Year of construction: 2007, Liebherr A924b-957 litronic TIER 3 OVERHAULED Year of manufacture: 2007 Gbedpfxoyt Idpo Aagen Liebherr engine 127kW Tier 3 / EPA 8 solid tyres 10.00-20 Gumasol Dozer blade Industrial mono boom 6.80m Industrial angled stick 5m Operator's cab hydraulically elevating Cabin with front protection grille Radio system Air-suspended driver's seat Positioning swing brake Lift cylinder damping Lift cylinder with pipe rupture protection Overload warning device Generator drive mounting kit DRIVELINE WARRANTY

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 15,080 h, Liebherr LH30. Year: 2015. Hours: 15,090. Industrial boom 6.80 m. Industrial stick 5 m with front cylinder. Four outriggers. Solid tires. CE certificate. Good condition. Gbedpfsya Iadjx Aagen

Condition: excellent (used), functionality: fully functional, fuel type: diesel, overall weight: 23,000 kg, Year of construction: 2019, operating hours: 9,563 h, LIEBHERR LH22M. Year: 2019. Hours: 9,563. Hydraulic cab. Four outriggers. Solid tyres. 5-meter industrial boom. 4-meter industrial stick with hydraulic line for attachments. Fitted with stone grapple. CE certified. Excellent condition. Gbodpsyh N Tfsfx Aagen

Year of construction: 2025, condition: new, Also, different models are available. MACHINERY WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Horizontal Extension: 14.000 mm 2. Pump Capacity: 2x160 lt / min 3. Operating Pressure: 320 bar ( 280 bar for the polyp ) 4. Oil Tank Capacity: 350 lt 5. Electric Motor: 75 kW 6. Turret Revolution : 0-8 rpm 7. Operating Weight: 30-35 tons 8. Swivel Angle: 360° Gbjdped R Rakjfx Aagon 9. Vertical Angle: 76° 10. Polyp (Grab ) Capacity: 450 liter 11. Polyp (Grab ) Rotation Angle: Infinite 12. Polyp (Grab) Teeth Quantity: 5 Stationary, Crawling, Mobile, and Tyre versions of the material handler are available upon request.

Condition: like new (used), Year of construction: 2023, operating hours: 2 h, Deutz TCD 4.1 L4 Deutz TCD 4.1 L4 EU Stage V / U.S. Tier 4 – EPA (115 kW) Charge air and water cooler Electronic direct injection / common rail Extended idle automation with engine shut-off function ECO and Power mode Temperature-controlled fan drive with reversible fan Spatially separated high-performance cooling system Cooling system with temperature-controlled fan drive Reversible fan for hydraulic oil cooler Jump-start terminals on upper carriage Maintenance flaps, gas-spring assisted with closing aid Gbedpfxsyh A Iij Aagon Automatic central lubrication system, grease reservoir refillable from the ground Rear-view camera Side camera LED lighting package (equipment) LED lighting package (cabin) Stabilizer blade on the oscillating axle side, width 3m, with integrated cylinder protection Travel direction detection and steering direction reversal Electric steering lock for rigid axle All-wheel drive and all-wheel steering Dual-circuit brake system Powershift transmission Twin pneumatic tires, without intermediate rings 10.00-20 16PR (Trelleborg T900) Wireless tire pressure monitoring Automatic oscillating axle lock Front and roof protection grilles for timber handling machines Rigid cabin system (viewing height 4.00 m) Cabin privacy glazing (side and rear window) Single-pane safety glass Sliding window in cabin door Clear glass roof window Windscreen wiper-washer system (front) Low-frequency suspended comfort driver's seat incl. seat heating and seat ventilation with synchronized armrests / joysticks Joystick steering Automatic climate control Multifunction display Document clip Reach at stick pin: 13m at grab tip: 10.7m Near-field extension for loading stick Level monitoring for coolant and hydraulic oil Attachment filter system Pipe rupture valves for lift cylinder Pipe rupture valves for stick cylinder Basic overload warning system Quick-release coupling on loading stick Wood grab available on request: 1 or 1.25 m³

Condition: used, Year of construction: 2014, operating hours: 4,848 h, Liebherr Engine D934 A7 – 140 kW (EPA) Weight: 43 tons Undercarriage EW - Width: 3,800 mm - Track gauge: 4,500 mm - Track pads, triple grouser, 600 mm, D6C, 56 links - Two-piece track guide Industrial monoblock boom, straight, Z1, 9.10 m Industrial stick, tip slightly angled, 7.50 m Hoist cylinder damping Active lowering of hoist cylinder Rod protection for piston rods, energy recovery cylinder Auto-lift Engine automatic shutdown Travel alarm, acoustic, non-deactivatable Proportional control (left): medium pressure circuit Joystick hand rest (raised) Roof window wiper Hydraulic cab elevation LHC 255 (from 3.24 m continuously adjustable up to 5.25 m) Narrow platform for LHC 255 Gsdpfeyffm Ssx Aagjbn Comfort radio Comfort driver's seat Cab floor window with armored glass Rear area surveillance with camera Work lights cabin front, 2 units, LED 1300 lumens Work lights cabin rear, 2 units, LED 1300 lumens Rotating warning beacon on cab, 1 unit Bypass filter, Liebherr

Condition: used, functionality: fully functional, color: yellow, Year of construction: 2017, operating hours: 13,450 h, LIEBHERR LH40M. Year: 201. Hours: 13,450. Four grapples. Solid tires. Hydraulic cabin. 9.10 m industrial boom. 7.50 m industrial stick. CE certificate. Very good condition. Gjdsxl E Afjpfx Aagsbn

Condition: new, Polyp Attachment Machine: Sennebogen835 Capacity: 0.8m3 Gbsdsx Uwbuspfx Aagon

Condition: good (used), fuel type: electric, Year of construction: 2013, operating hours: 6,600 h, machine/vehicle number: 83851483, Equipment: crane, Fully functional material handler for ports, in very good condition. Onsite inspection is welcome. Gbedpevwbdyefx Aagen Another 835 R is also available (model year 2011 with 10600 hours).

Condition: good (used), Year of construction: 2005, machine/vehicle number: SBLG 0005, Proto Trax VL 3 jaw SMW chuck 11KW Spindle motor 104mm spindle bore Spindle speeds 30-1800RPM 350mm swing over cross slide X axis travel 280mm Z axis travel 1650mm 1750 mm between centres Coolant pump and tank Gbodpfx Aajzb Ipzjgjn

Condition: excellent (used), Year of construction: 2021, Traverses X Y Z: 660 x 450 x 500mm, Table size 720mm x 420mm, table load 500kgs, spindle speed 12,000rpm, spindle motor power 28Hp, Gbodpszbitusfx Aagjn Siemens 828D Control with Shopmill, rapid feed XYZ axis 24m/min, Spindle taper BT40, 12 station ATC

Condition: good (used), Year of construction: 2012, Traverses X Y Z: 785 x 470 x 530mm, Table size 900mm x 500mm, spindle speed 8000rpm, spindle motor power 11kW, Prototrak, rapid feed XYZ axis 20m/min, Spindle taper BT40, 16 station ATC, swarf auger. Godpfx Aaeq R Tnzogsbn

Condition: used, Year of construction: 2004, XYZ Proturn VL 355 ProtoTRAK CNC Gap Bed Centre Lathe ProtoTRAK SLX Control (2004) Max’ Distance Between Centres 1000mm Max’ Swing over Cross-slide 225mm Max Swing over Bed 360mm Spindle Bore 52mm Spindle Speeds 50 – 4000 rev/min Spindle Motor 5.75Kw Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2004 Supplied with: 3 Jaw Chuck Interlocking Chuck & Main Guards 3 Toolholders TRAKing Constant Surface Speed Coolant Worklight Gbjdpfx Aozav N Tjagsn Auto Lubrication For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79196 Machine Serial Number: SL091 Cost: £13,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2012, operating hours: 14,278 h, Vehicle No.: 375-25 Gbsdpfsx S Airjx Aagsn Terex-Fuchs MHL 340 Magnet system ENGINE NEWLY OVERHAULED * Year of manufacture: 2012 * Operating hours: 14,278 hours * Weight: 27,400 kg * Power: 128 kW * Solid rubber tires (POOR CONDITION) Inspection is possible at any time during our business hours; test drives can be arranged by appointment! For export sales, a deposit will be withheld; this will be refunded after receipt of the proof of arrival certificate. Company or advertising logos on the vehicles may have been digitally edited in the photos. No guarantee is given for the function of accessories or additional equipment. All information is subject to change without liability – errors, modifications, typing mistakes, and prior sale reserved. Vehicle descriptions do not constitute guaranteed properties. Please refer to our general terms and conditions and acknowledge them.

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 1630 ProtoTRAK CNC Gap Bed Centre Lathe Godpozav D Dsfx Aagjbn Ex Research machine – Superb Condition ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 760mm Max’ Swing over Cross-slide 218mm Max Swing over Bed 400mm Spindle Bore 52mm Spindle Speeds 150 – 2500 rev/min Spindle Motor 5.75Kw Spindle Camlock D1-6 Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 60mm Tailstock Travel 127mm Manufactured | 2011 Weight 1560Kgs Supplied with: Two-axis CNC, Two-axis DRO. TRAKing, Constant surface speed. Electronic hand-wheels for X & Z Axes. Joystick for feed & rapids. Interlocked chuck guard and main guard. Quick change toolpost with holders. 3 Jaw chuck 5C Collet Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78211 Machine Serial Number: 16P99080-063 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.