Used Gabbiani Gs120 5/26 for sale (63,560)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4280x1700x1700 mm Weight 4600 kg Total power requirement 43,6 kw Kjdpfx Aiev A Hp Ej Rodr

Condition: excellent (used), Year of construction: 2021, 4-SIDE EDGE BANDING LINE Workpieces dimensions: min. mm 195 x 250 x 60 / max. mm 1200 x 2500 x 60 Composed of the following machines: O12044a) Infeed table "HOMAG" Mod. TBL 100/25/12 with motorized rollers O12044b) 1st Double-side Sizing & Edge Banding machine "HOMAG" Mod. EDGETEQ D-610 (KFL 525/5/A3/15) O12044c) Turning Station "HOMAG" Mod. TDL 310 / 25 / 12 (from lengthwise to crosswise) O12044d) 2nd Double-side Sizing & Edge Banding "HOMAG" Mod. EDGETEQ D-610 (KFL 526/6/A3/25) Kdjdpfx Aox Aqbhji Ror

Condition: used, Year of construction: 1971, swing diameter 0520 mm turning diameter over bed slide 400 mm Ksdpfxjy Nd S Aj Ai Redr turning dia. in gap 1000 mm turning length 1250 mm turning speed range - spindle 11,2 - 1120 U/min total power requirement 7 kW weight of the machine ca. 3,8 t dimensions of the machine ca. 2,7 x 1,7 x 1,7 m Machine has a 4 position toolholder with quick change device and DRO.

Condition: good (used), Year of construction: 2005, Pusher Furnace System (PUS1), Manufacturer: Ipsen International GmbH, Type: PP-2-65x65x65-18-G, Serial No.: AN 10.1595-01, Year of manufacture: 2005, Fuel: Gas/Natural Gas/Nitrogen/Methanol, 414 kW, 296 kVA comprising: Two-Chamber Pre-Washing Machine, Type: WPSSB-65x65x65-E, 302 A, 199 kVA, electric, Washing tank 2 m³, rinsing tank 2 m³, 60-80°C Pusher Preheating Furnace, Type: DL 65x65x65 4-G, 25 A, 9.5 kVA, natural gas heated, 80-100 mbar, 350-500°C Pusher Gas Carburizing Furnace (Double Line), Type: PP-2 65x65x65-18-G, natural gas heated, 86 A, 29.6 kVA, 10 kWh/m³, 80-100 mbar, 860-950°C, 140 pieces per batch, 695 kg/h Oil Quenching Bath (Hardening Oil), Type: QO-65x65x65-E, 161.5 A, 93.1 kVA, electric, air cooling, 6 m³ tank volume, 120°C max., 60-80°C working temperature Two-Chamber Post-Washing Machine, Type: WPSSB-65x65x65-E, 302 A, 199 kVA, electric, washing tank 2 m³, rinsing tank 2 m³, 60-80°C Pusher Tempering Furnace, Type: DL-65x65x65-6-E, 126.8 A, 84 kVA, electric, 300°C max. furnace temperature, 150-240°C working temperature Batch Transport System, Measuring, Control, and Switch Cabinet with Conti-Control System, Ksdpfx Ajyabxyji Redr Type: CO/CO2-2 Batch Data: Case hardening for transmission parts 650 mm x 650 mm x 650 mm, max. 280 kg, batch transport height 800/2,200 mm

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 150 583, total height: 3,975 mm, ram adjustment: 125 mm, installation height: 410 mm, table height: 1,220 mm, total width: 2,725 mm, total length: 3,510 mm, table length: 1,500 mm, table width: 1,200 mm, pressing force: 200 t, control cabinet height: 2,200 mm, control cabinet length: 340 mm, control cabinet width: 600 mm, type of input current: three-phase, clearance between the columns: 900 mm, distance between side stands: 900 mm, distance between stands: 1,520 mm, overall weight: 3,700 kg, year of last overhaul: 2025, ATTENTION: The machine sustained transport damage. The machine is currently disassembled. Components can be inspected. The machine will be completely mechanically and electrically overhauled/repaired before delivery in 2026/2027. Pressing force: 2000 kN Adjustable stroke: 20 - 160 mm Ram adjustment: 125 mm Stroke rate: 30 - 180/min Center height: 410 mm Table dimensions: 1500 x 1200 mm (The press will be delivered with a new table top; T-slot design can be freely selected) Ram size: 1500 x 1000 mm Control system: SIEMENS S7 1500 series, PC 477E, year of manufacture 2020. Ksdpow H Arvefx Ai Rsdr

Condition: ready for operation (used), Year of construction: 2015, Complete hamburger production line by VEMAG Manufacturer: VEMAG Maschinenbau GmbH – Germany Line model: Roobot 500 + FM250 + SC261 equipment set Condition: Used, very good Year of manufacture: 2015 / 2020 Set description The VEMAG hamburger production line is a fully automated system designed for forming, portioning, and arranging meat, poultry, fish, or vegetable-based burgers. The equipment provides high throughput, precise portioning, and excellent shape consistency while maintaining a high standard of production hygiene. The line consists of three main components: 1. VEMAG ROOBOT 500 filling machine (year 2015) Automatic feeding system – the main drive of the line. Controls the movement and dispensing of the filling into the forming machine. Equipped with a feeding system with precise portion control. Ensures consistent output and accurate weight. Made of stainless steel with a hygienic design suitable for high-pressure washing. Key technical data: Output: up to 6000 portions/hour (depending on the raw material) Portion range: 20 to 300 g Drive: electric / pneumatic 2. VEMAG FM250 (year 2020) Burger forming machine – the newest component of the line. Forms burgers, patties, meatballs, vegetable products, and fish products. Variable shape and thickness – quick die changes are possible. Integrated system of forming plates with adjustable size. Ideal for precise forming of high-quality surface products. Technical data: Kdjdpfx Aszb I Ecoi Ror Burger diameter: 60–130 mm Output: 100–180 cycles/min Material: stainless steel AISI 304 Works in conjunction with Roobot 500 3. VEMAG SC261 (year 2015) Belt conveyor / separator: Collects the formed products and arranges them in rows. Variable belt speed and transport direction. Easy to disassemble and clean. Technical data: Material: stainless steel Control: electronic, compatible with FM250

Condition: used, Year of construction: 2025, Second-hand machine Year of manufacture: 2025 Condition: as new, delivered in December 2025 Kedozk N Txjpfx Ai Redr Features and technical specifications: Solid worktable made of heavily ribbed grey cast iron for maximum stability and durability robust base frame made of welded steel – guarantees high torsional rigidity and vibration-free operation Precision sliding crosscut table made of anodised aluminium – guided smoothly via high-quality Ball-contact system Carbide guideways – for lasting precision and minimal maintenance swivelling grey cast iron saw unit with double segment guide – precise zero-point swivelling for maximum cutting accuracy Solid rip fence with round bar guide Fitted with a sliding eccentric clamping device Integrated angle cutting device on the sliding carriage – for fast and precise mitre cuts Scoring unit with belt drive Sliding carriage length 2600 mm Trimming length 2600 mm Sliding carriage width 360 mm Table length 940 mm Table width 560 mm Cutting width with rip fence: 900 mm Max. cutting width to the left of the saw blade: 3200 mm Saw blade tilt 90–46° Max. cutting height at 90° = 100 mm Max. cutting height at 45° = 71 mm Saw blade diameter 315 mm Speed 4,000 rpm Scoring blade diameter: 120 mm Speed of scoring saw blade: 9,000 rpm Motor 6 kW Weight approx. 560 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: good (used), Year of construction: 1996, Erfurt Press Pressing force: 6,300 kN Stroke length: 80-350 mm Stroke adjustment: 150 mm Installation height: 800 mm Table surface: 2,800 x 1,400 mm Stroke rate: 20-80 strokes/min Kedpfx Aiszlyrho Rodr Control system: Siemens S5

Condition: ready for operation (used), Year of construction: 2007, operating hours: 82,265 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, table width: 600 mm, table length: 1,400 mm, table load: 1,500 kg, spindle speed (max.): 10,500 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 42, tool weight: 5,000 g, number of axes: 3, This STAMA MC526 was manufactured in 2007. It features a 40-tool magazine, NC swivel table, chip conveyor, belt filter system, and an internal coolant supply via the spindle. Additional amenities include a high-pressure system, Renishaw probe, and an extraction system. Consider the opportunity to buy this STAMA MC526 vertical machining centre. Contact us for more information. Additional information • Feed Force X/Y-Axis: 4,000 N • Feed Force Z-Axis: 8,000 N • Rapid Traverse X/Y/Z: 60 m/min • Feed Rate X/Y/Z: 1 – 10,000 mm/min • Axis Dynamics: X = 5 m/s² • Axis Dynamics: Y = 8 m/s² • Axis Dynamics: Z = 12 m/s² • Distance Table to Spindle Nose: 350 – 710 mm • Tool Clamping Force: 7,000 N • Spindle Diameter: 65 mm • Constant Torque Range: Up to 3,000 rpm • Torque at 100% Duty Cycle: 30 Nm • Torque at 20% Duty Cycle: 59 Nm • Power Above 3,000 rpm at 100% Duty Cycle: 9.5 kW • Power Above 3,000 rpm at 20% Duty Cycle: 18.5 kW • Maximum Tool Diameter (All Positions Occupied): 88 mm • Maximum Tool Diameter (Adjacent Positions Free): 125 mm Kdjdpfjx S Skxox Ai Rjr • Pull Stud Standard: DIN 69872-19 • Tool Change Time (Chip-to-Chip): Approx. 2.4 s • Tool Offset Functions: Length and Radius Compensation • Tool Data Input: Via Input Station or CNC Screen Menu • Positioning Resolution: 0.001 mm • Machine Prepared For: Fixed Table with T-Slots and Location Holes • Machine Prepared For: NC Rotary Table with Tailstock • Tool Holder Type: SK40 DIN 69871 A/B • Siemens 840D SolutionLine • Chip conveyor optional • Belt filter system • Internal coolant supply via spindle • High pressure capability • Renishaw probe • Extraction system • Connection Voltage: 400 V • Phase: 3~ • Frequency: 50 Hz • Nominal Current: 34 A • Additional Fuse: 3 x 50 A • Minimum Connection Cross Section: 25 mm² • CE Marking: Yes Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, Machine description and equipment* Max. diameter: 26 mm Max. turning length (fixed guide bushing): 320 mm Rapid traverse: 32 m/min Main spindle power: 5.5 kW Ksdjzg Nuuopfx Ai Redr Main spindle speed: 0 – 8000 rpm C-axis (main spindle): 5° Max. diameter of sub-spindle: 26 mm Number of controlled axes: 9 Bar feeder: FMB Turbo 3-32 Specific details Turning length: 320 mm Turning diameter: 26 mm Spindle power: 5.5 kW Speed min-1: 8000 Number of axes: 9 Bar feeder magazine: FMB Turbo 3-32

Condition: used, Year of construction: 2017, operating hours: 3,928 h, overall weight: 434 kg, load capacity: 12 kg, arm reach: 1,850 mm, This is a used, tested industrial robot ABB IRB 2600-12/1.85 from year of manufacture 2017 with IRC5 Single controller. The system is designed for industrial automation applications and is typically used in areas such as handling, assembly, and trajectory applications. The robot features a payload capacity of 12 kg, a reach of 1850 mm, and a total of 3928 operating hours. The unit comes equipped with various software options including DeviceNet, PROFIBUS, World Zones, Path Recovery, and Collision Detection. Ksdpsy Nfktjfx Ai Rjdr

Condition: new, 26-HT-Wooddry365-SET Wood Drying Kit WoodDry 365 SET Our wood drying kit provides everything needed for rapid and effective wood drying. The set includes a high-performance WoodDry 365 automatic controller, a professional wood dehumidifier, two fans, two sensors, and a heater. The user-friendly operation ensures effortless handling and delivers outstanding drying results with minimal effort. CE compliant 100% Made in Austria (designed, manufactured, and quality-tested) Kodpfx Aiewzzg Is Rjdr Advantages and Features: - Complete Set: All essential components required for efficient, comprehensive wood drying are included. - Compact and Space-Saving Solution: All components are perfectly matched and require little space, making the system suitable even for smaller workshops or rooms. - Easy Operation: The intuitive WoodDry 365 controller is easy to use, suitable for both beginners and experienced users. - Optimal Drying: Thanks to the heating unit and two fans, air circulation is optimized for faster and more uniform wood drying. - Energy Efficient: The kit operates with high efficiency, ensuring low operating costs combined with excellent results. - Versatile Application: Ideal for drying wood for furniture production, woodworking, or other projects. Also suitable for use in small to medium-sized workshops. - Automatic WoodDry 365 Controller: The proprietary control unit fully manages the entire drying process. The operator only needs to specify the wood thickness, type, and desired final moisture content. The system automatically adjusts the drying process for optimum results and energy savings. - Robust and Durable: High-quality components guarantee a long service life and reliable performance over an extended period. - Combo Sensor: Specially developed for precise measurement of air humidity, wood moisture, and room temperature. - Suitable for most softwoods and hardwoods such as spruce, beech, ash, as well as exotic woods and firewood. Oak is not recommended due to its high tannin content—similar to other dehumidifier systems, its use is limited. - The standard set with one HT100 dehumidifier can process up to 9m² of wood. Technical Data: Controller Connection: 16A. Dehumidifier Rated Power Consumption: 1050W Airflow: 1100 m³/h Maximum Dehumidification Capacity: 100 liters / 24h Dimensions: 516 x 516 x 656 mm Weight: 48 kg Heater Heating Output: 9.0 kW Dimensions: 455 x 275 x 300 mm Air Output: 1,150 m³/h Fans High Airflow: 102 m³/min Air Velocity: 3.66 m/s Low Noise Operation: 64.1 dB(A) Power Supply: Mains operation, hard-wired power cable (230 V, 50 Hz) Dimensions: 52 x 53 x 18 cm (W x H x D) Power Cable Length: approx. 162 cm Compact Sensor Cable: 5 meter cable Measured Values: air humidity, wood moisture, temperature Optional Equipment: - 1x additional compact sensor with 10 meter cable - 1x additional HT100 dehumidifier – for drying up to 18m² of wood - 1x air damper with cable – for optimized drying

Condition: excellent (used), Year of construction: 2016, Engel Victory 2050/260 Tech Ecodrive with Engel Viper 20 robot / hybrid machine / operating hours: approx. 20,000 hours in automatic mode Year of manufacture: 2016 Injection unit: Screw diameter: 70 mm Shot weight: approx. 1020 g Injection pressure: 1780 bar Dosing volume: 1155 ccm Clamping unit: Clamping force: 260 t Kdedpfx Ajzpat Tji Ror Tie bar spacing: 0x0 mm Platen size: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 300 - touchscreen Additional equipment: Production line with Engel Viper 20 robot Tie-bar-less, hybrid machine: energy-saving and very quiet Operating hours: approx. 20,000 in automatic mode Robot interface Air valve x 4 Hydraulic core pull x 2 on the side of the moving platen Hydraulic core pull x 6 on the side of the stationary platen Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by an inverter - energy saving Proportional valve on the injection unit – precise injection Kistler sensor - tool pressure control Automatic, hydraulically operated tool mounting system, controlled via the machine control panel Integrated automatic cooling water regulator e-flomo with heating function Robot Engel Viper 20 Year of manufacture: 2016 6-axis robot: 6 axes are driven by servo motors (electric): X, Y, Z, B, C, A Payload: 11 kg Touch control panel Safety package for robots Robot with adapter, conveyor belt and safety enclosure Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 21000 kg Length/Width/Height: 7.36x2.06x2.37 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: Upon request

Condition: used, Technical data: Briquette diameter: 50 mm Briquette length: 50 mm Kjdpfx Aiey N Taie Redr Hopper diameter: 1000 mm Hopper height: 920+1000 mm Throughput: approx. 50 kg/h Power supply: 380 V Motor power: 4 kW Emergency stop switch Overall dimensions: Length: 1600 mm Width: 1100 mm Height: 1500+1000 mm

Condition: excellent (used), Year of construction: 2017, Ferromatik Milacron K-TEC 350-2650 / Production line with Sepro robot Year of manufacture: 2017 Kdodpszc Nr Hsfx Ai Rjr Injection unit: Screw diameter: 70 mm Shot weight: 1104 g Injection pressure: 2175 bar Dosing volume: 1213 ccm Clamping unit: Clamping force: 350 t Tie bar spacing: 750x750 mm Platen size: 1110x1165 mm Ejector: hydraulic Clamping unit: hydraulic Control: MOSAIC - Touchscreen Additional equipment: Very good technical condition High-speed machine Operating hours: approx. 10,000 hours in automatic operation Euromap 67 Robot interface Air valve x 5 Hydraulic core pull x 3 Control with hot runner system Injection unit hardened - bimetal Proportional valve on the injection unit – precise injection Parallel movements Machine with cylinder / battery with compressed nitrogen (additional charge for fast operation) Energy-efficient machine – equipped with a system with 3 hydraulic pumps with variable output Machine was regularly serviced by the authorized service provider in Germany Dimensions: Weight: 22000 kg Length/Width/Height: 8.62x2.21x2.80 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź.

Condition: ready for operation (used), Year of construction: 2018, Koenig Herkules HK1100/2650 L-S bowl lift for Kemper SP150 bowls dough scraping unit safety laser scanner max. 980 kg lifting weight lifting height approx. 257cm Kdjdpov S D Dxjfx Ai Rer total height 380cm year of build 2018

Condition: excellent (used), Year of construction: 2019, operating hours: 7 h, ABB 2600-12/1.85 Type B +Trackmotion 2.9 meter,complete as new DTC 7 hours 2019 DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Ksdpfsyl Avqox Ai Redr

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: P260713253, 𝘼𝙪𝙩𝙤𝙢𝙖𝙩𝙞𝙘 𝘿𝙤𝙪𝙗𝙡𝙚-𝙀𝙣𝙙 𝙋𝙧𝙤𝙛𝙞𝙡𝙞𝙣𝙜 𝙇𝙞𝙣𝙚 𝙛𝙤𝙧 𝙋𝙖𝙧𝙦𝙪𝙚𝙩 𝙁𝙡𝙤𝙤𝙧𝙞𝙣𝙜 1. 𝗚𝗲𝗻𝗲𝗿𝗮𝗹 𝗜𝗻𝗳𝗼𝗿𝗺𝗮𝘁𝗶𝗼𝗻 • HOMAG OPTIMAT FRP225/7/10PL/L – Longitudinal Profiling Machine • HOMAG OPTIMAT FRP226/5/5PL/Q – Cross Profiling Machine Automatic, high-speed double-end profiling line designed for the production of solid wood, engineered wood, and laminate flooring. The line performs precision machining on all four edges, including tongue-and-groove and click-locking profiles. 2. 𝗠𝗮𝘁𝗲𝗿𝗶𝗮𝗹𝘀 𝗣𝗿𝗼𝗰𝗲𝘀𝘀𝗲𝗱 • Solid hardwood flooring • Engineered wood flooring • Laminate flooring • Multi-layer parquet • Decorative flooring panels 3. 𝗠𝗮𝗶𝗻 𝗧𝗲𝗰𝗵𝗻𝗶𝗰𝗮𝗹 𝗦𝗽𝗲𝗰𝗶𝗳𝗶𝗰𝗮𝘁𝗶𝗼𝗻 Parameter Specification Machine Type Double-End Tenoner / Profiling Line Longitudinal Machine HOMAG FRP225 Cross Machine HOMAG FRP226 Maximum Feed Speed Up to 80 m/min Working Principle Continuous automatic feed Number of Working Units 7 (FRP225) + 5 (FRP226) Total Working Units 12 Production Mode Continuous 4. 𝗪𝗼𝗿𝗸𝗽𝗶𝗲𝗰𝗲 𝗖𝗮𝗽𝗮𝗰𝗶𝘁𝘆 Parameter Typical Range Thickness 5–25 mm Width Customer-specific configuration Length Customer-specific configuration 5. 𝗠𝗮𝗰𝗵𝗶𝗻𝗶𝗻𝗴 𝗢𝗽𝗲𝗿𝗮𝘁𝗶𝗼𝗻𝘀 The line is capable of performing: • Longitudinal profiling • Cross-end profiling • Tongue machining • Groove machining • Click profile machining (depending on tooling) • Micro-bevel production • Relief grooves • Edge trimming • Sizing and calibration • Four-side profiling 6. 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗖𝗼𝗻𝗳𝗶𝗴𝘂𝗿𝗮𝘁𝗶𝗼𝗻 HOMAG FRP225 Function • Longitudinal edge profiling Configuration • Six machining units • High-frequency spindle motors • Precision side guides • Automatic pressure system • Heavy-duty chain conveyor HOMAG FRP226 Function • Cross-end profiling Configuration • Four machining units • Automatic synchronization with FRP225 • Precision positioning system • High-speed transfer conveyor 7. 𝗗𝗿𝗶𝘃𝗲 𝗦𝘆𝘀𝘁𝗲𝗺 • High-frequency spindle motors • Variable-speed feed drive • Precision chain transport system • Pneumatic pressure rollers • Servo-controlled positioning (depending on machine version) 8. 𝗧𝗼𝗼𝗹𝗶𝗻𝗴 • Leitz • Leuco • Kanefusa • AKE • Tigra Typical tooling: • Profile cutters • Grooving cutters • Chamfer cutters • Relief cutters • Diamond tooling (PCD) 9. 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗖𝗼𝗻𝘁𝗿𝗼𝗹 • Siemens PLC control system • Frequency-controlled spindle drives • Digital machine diagnostics • Electronic feed speed adjustment 10. 𝗣𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝗼𝗻 𝗣𝗲𝗿𝗳𝗼𝗿𝗺𝗮𝗻𝗰𝗲 Parameter Typical Value Feed Speed Up to 80 m/min Production Capacity Approximately 1,500–4,000 m² per shift* 11. 𝗧𝘆𝗽𝗶𝗰𝗮𝗹 𝗣𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝗼𝗻 𝗟𝗶𝗻𝗲 𝗟𝗮𝘆𝗼𝘂𝘁 1. Automatic infeed system 2. HOMAG FRP225 longitudinal profiler 3. Automatic transfer section 4. HOMAG FRP226 cross profiler 5. Inspection station 6. Automatic stacker 12. 𝗠𝗮𝗶𝗻 𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲𝘀 • High dimensional accuracy • Excellent profile repeatability • High production speed • Fast tooling changeover • Continuous automatic operation • Suitable for traditional tongue-and-groove and modern click systems • Reliable industrial design for high-volume production Kdjdpfx Aiszmrw Ss Ror 𝗧𝘆𝗽𝗶𝗰𝗮𝗹 𝗔𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻𝘀 • Solid parquet flooring • Engineered flooring • Laminate flooring • Luxury wood flooring • High-precision click flooring systems

Condition: used, Multi-spindle drilling machine Maggi BS 35 2/26. Kdodpfx Ajzkh Rcoi Rjr

Year of construction: 1994, condition: excellent (used), functionality: fully functional, Manufacturer: Rapid Model: 2645-KU 3 rotor knives 2 stator knives Power: 12 kW Kodpswg R S Rsfx Ai Rjdr Slow-speed mill with soundproof enclosures PRICE REDUCTION FROM 4,250 TO 3,750 EUR!!!

Condition: used, Technical specifications: Kodpfxszd Ekas Ai Rjdr Number of pistons: 6 Piston diameter: 60 Connection to central heating – None – cold shelves Shelf dimensions: 1300x3000 mm Clearance: 475 mm Hydraulic clamping Safety switch Motor power: 3 kW Power supply: 380 V Overall dimensions: Length: 3360 mm Width: 1470 mm Height: 1750 mm

Condition: refurbished (used), Year of construction: 2017, machine/vehicle number: R-00550, load capacity: 12 kg, arm reach: 1,850 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Refurbished ABB 2600-12/1.85 manufactured in 2017.03. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: 2600-12/1.85 Model Number: IRB Year of Manufacture Robot: 2017.03 Warranty term (months): 12   Payload (kg): 12 Reach (mm): 1850 Repeatability (mm): ± 0.04 Controlled Axes: 6-axis Kodpfjyii Eqex Ai Rodr Installation Type: Floor, Upside-down Mount Weight (kg): 284   Controller: IRC5 Year of Manufacture Cabinet: 2017.03 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: used, Year of construction: 2017, operating hours: 2,509 h, functionality: fully functional, machine/vehicle number: Robot: 2600-109101 / Controller: 6700-101707, overall weight: 434 kg, load capacity: 12 kg, arm reach: 1,850 mm, ABB industrial robot featuring an IRB 2600-12/1.85 Foundry Plus Type B manipulator and an IRC5 M2004 controller, designed for industrial automation applications. The robot is used and has been tested. Typical applications include handling, foundry operations, assembly, and general automation. It has a payload capacity of 12 kg with a reach of 1850 mm. Manufactured in 2017, it has 2509 operating hours and is running RobotWare 6.07.00.00 software. The robot is equipped with a FlexPendant teach pendant, a power cable, two connection cable sets, a floor mounting plate, and a Foundry Plus protection package. Ksdpfxszami Re Ai Rjdr

Condition: good (used), Year of construction: 2020, functionality: fully functional, 5-axis CNC machining center for processing carbon and fiberglass parts, plastics, Ureol, and wood. Kodozavtrjpfx Ai Rsdr Availability: approximately 4 weeks. Machine details: CMS ANTARES 2615 - Axis travels: X-axis: 2,600 mm Y-axis: 1,500 mm Z-axis: 1,200 mm B-axis: +/- 120° C-axis: +/- 270° - Universal tool head (15 kW | max. speed: 24,000 rpm) - Tool magazine: linear magazine with 8 stations, moving in the X-direction - Tool holder: HSK 63F - Minimum quantity lubrication - Machine table with aluminum plate and T-slots - CNC control: Fanuc 31 IB5 - Vacuum system: 1 x 100 m³/h - Chip trays, round axis measuring unit, dust protection, ... Additional services: Installation, commissioning, and training available!

Year of construction: 2002, condition: used, Hard cover book line Consisting of Hard cover book line Kolbus BF526 Year: 2002 Description: - Semi automatic setting - Starfeeder - Pre-heater - Rounding and backing station - Glue unit - Gauzing station - Book mark suction device - Glue unit - Head and tail banding station - Pressing station - Casing-in station - Case infeed device - Case pre-stacking conveyor - Case bending station - Case forming station Kedjzvfcyspfx Ai Rodr - Coldglue circulation pump Building in machine VBF EP 680 R Year: 2007 Description: - Right hand infeed - Delivery to the right Book stacker VBF BLSD 650 Year: 2007 - Straight delivery: Solema (2007)