Used Galen Group Marble Attachments for sale (7,725)

Condition: excellent (used), Year of construction: 2018, operating hours: 10 h, functionality: fully functional, Automatic toilet paper and kitchen towel packing machine We have used it for less than 10 hours. After purchase, it did only a couple of test runs and then was stored in a dry warehouse for later use. It had never been used since. There might be some bends on the machine since it has been moved a couple of times. Bdodpouyhf Hofx Ad Ajb Specification Power 220V 50Hz Packing: Toilet paper 2/4/6/8/10 rolls per pack with handle, Hand towel 2/4 rolls per pack with handle Packing in film, overwrapping with meld line on the back. It uses opp film, a max roll diameter of 30cm, and a thickness of 0.03 - 0.10 by the specification, no idea about other materials - have not tested any. For setting up and configuration the machine you will have to contact the manufacturer The machine can be seen, powered on, and set to automatic/manual running. User manual is available, have videos from the manufacturer only

Condition: excellent (used), Numerical Control Type Power Control PC85T Software WoodWOP + TOPDRILL No. 2 Through-feed motorized conveyoring belts No. 2 Horizontal units/supports (with Digital quota/axes display) No. 1 Drilling head for each horizontal unit (1 x Kw 1,5) No. 21 Splindles for each horizontal drilling head Max. working width (mm) 2500 Min. working width (mm) 250 Bedpsyv Ev Aofx Ad Ajdb No. 4 Bottom vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each bottom vertical unit (2 x Kw 1,5) No. 4 Vertical top pressure clamps Motorized carpet to evacuate chips and wastes Total installed power (Kw) 35

Condition: used, functionality: fully functional, Year of construction: 2014, load capacity: 3,300 kg, empty load weight: 795 kg, Accessories Load center: 600 Mast type: None Condition: Ready for use and fully functional Bdsdpfx Adeu Dzrho Aob Technical condition: Very good Description: In addition to this Luck model, we have approx. 200 heavy-duty forklifts, compact forklifts, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always feasible for us. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this LASTSTABILISATOR , The Load Stabiliser P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment.

Condition: used, functionality: fully functional, load capacity: 6,000 kg, empty load weight: 1,250 kg, total length: 2,800 mm, Carrying mandrel Load center: 2000 Condition: Ready for use and fully functional Bodpfx Adju Dzrbj Asdb Technical condition: very good Description: In addition to this DORN model, we have approx. 200 heavy-duty forklift trucks, compact forklift trucks, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always feasible for us. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this TD-270 P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment.

Condition: new, Year of construction: 2026, Laser power: 6000 Watt Working range laser: 3048 x 1524 x 280 mm simultanious: 150 m / min Max. positioning accuracy X,Y axis: 0,05 mm Max. steel: 20 mm Max. stainless steel: 16 mm Max. aluminium: 14 mm Max. copper: 8 mm Max. brass: 14 mm Max. workpiece weight: 1000 kg Length: 9500 mm Width: 4200 mm Height: 2600 mm Machine weight: 4800 kg Bsdpfx Asxaykasd Aedb Electrical connected load: 34 kW

Year of construction: 2007, condition: used, machine/vehicle number: EKP 84325-81, OPTICAL SORTER FOR CONTAMINANT SEPARATION - SORTEX by Bühler Type: MEAF DevCtrl Year of manufacture: 2007 Advanced optical machine designed for automatic sorting of bulk products, primarily foodstuffs, by color, shape, and structure. Bdjdpfxoyv Aite Ad Aob The unit is mechanically functional. Calibration required. Quoted price does not include transport.

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: 140311, cutting width (max.): 1,150 mm, Equipment: documentation/manual, Paper slicer- DATIEN 115 ECE group SBL Model: CT - 115 ECE Year of production: 2014 Bedpst U D Huefx Ad Aedb Factory number: 140311 Condition: Perfect. The slicer worked in a very small load. Machine connected, possibility of testing. Spare knives - 2 pcs. total 3 pcs. Full technical documentation Attractive price for quick sale.

Condition: like new (used), Year of construction: 2015, operating hours: 100 h, functionality: fully functional, Equipment: documentation/manual, Manufacturer: GEA (TDS) Type: Aseptic Tank Year of manufacture: 2015 With manhole With agitator Including valves Including control cabinet for valves Bodpfx Adjyrdzbs Ajdb Condition: as new, never used

Condition: ready for operation (used), PANEL SAW Bdjdpfx Adoyt E R Hj Aeb Carriage length: 1600 mm Cutting height: 75 mm Scoring unit Tilting saw unit up to 45° Manual raising and lowering of the saw blade SPINDLE MOULDER Spindle diameter: 30 mm Spindle height: 90 mm Manual spindle raise and lower Speeds: 3500/6000/8000 rpm SURFACE & THICKNESS PLANER Working width: 300 mm Maximum thicknesser height: 200 mm 3-knife cutterhead Conventional knives HORIZONTAL DRILLING MACHINE 550 kg 220 V Year: 2016

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003584 - Manufacturer Code: LCP2505AK-08 - Condition: As new (display item) - Functionality: Fully functional - Compatible Machine: - If interested, we offer overhaul service, please contact us. 1KG 20X20X20 Bodpfeyrn Sqox Ad Aedb

Condition: good (used), MMM Group Vakulab HL Medical Autoclave This listing is for the MMM Group Vakulab HL Medical Autoclave. The unit is in full working condition and is ready for immediate use. Overview The Vakulab HL autoclave from MM Group Medical is a high-performance, GMP-compliant sterilizer designed for the safe, reliable, and validated sterilization of laboratory instruments, equipment, and materials. Specifically engineered for use in pharmaceutical manufacturing, biotechnology facilities, and research laboratories, the Vakulab HL combines advanced vacuum-assisted steam sterilization with robust stainless steel construction to ensure consistent results in even the most demanding applications. Key Features inc Advanced Steam Sterilization, Pre- and Post-Vacuum Cycles: Ensures efficient steam penetration and rapid drying, Optimized Steam Distribution: Uniform sterilization across all load types Programmable Cycles: Fully adjustable parameters for different sterilization needs. GMP & Cleanroom Ready, Double-Door Pass-Through Design (optional): For installation between clean and non-clean areas, Stainless Steel Chamber & Piping: High-grade AISI 316L for corrosion resistance and hygienic operation, Integrated Monitoring: Real-time cycle control with full batch documentation capability. Operational Safety & Control User-Friendly HMI: Touchscreen interface for programming and monitoring, Automatic Door Operation: With safety interlocks to prevent accidental opening under pressure, Built-In Diagnostics: Self-check functions for preventive maintenance. Technical Specifications. The Vakulab HL is a vacuum-assisted steam sterilizer available in multiple chamber volumes, typically ranging from 300 to 1,000 liters. The sterilization process operates at temperatures between 121 °C and 134 °C, controlled via a PLC-based system with an intuitive touchscreen human-machine interface (HMI). steam, water, compressed air, and electricity. It is designed to meet EN 285, PED, ISO 9001, and GMP compliance requirements, and can be validated to ISO 17665 sterilization standards. Applications - Pharmaceutical Manufacturing: Sterilization of equipment, components, and containers, Biotechnology: Sterilization of fermentation vessels, culture media, and instruments, Research Laboratories: Sterilization of glassware, tools, and lab consumables, Hospitals & Clinical Settings: Safe sterilization of surgical instruments and textiles, System Components, High-grade stainless steel chamber with polished finish, Vacuum pump system for pre- and post-cycle air removal, Steam generation and distribution system, Control panel with PLC and HMI touchscreen, Integrated temperature and pressure sensors for validation. Quality & Compliance, Manufactured in accordance with GMP guidelines, Complies with EN 285 and ISO 17665 sterilization standards, Full FAT/SAT/IQ/OQ/PQ support for validation in regulated environments, Designed for integration into cleanroom and production facilities, Benefits - Consistent, Validated Sterilization for a wide range of load types. Bdedpfoyifqvox Ad Aeb

Condition: used, Face mask machine for sale Bdedpfx Adjypcxas Aob Mask size: 175 x 95mm band size: 185 x 15mm Machine with 4 sets web guiding system

Year of construction: 2019, condition: like new (used), Thermoformer Designed for pharmaceutical environments, it can thermoform trays for vials, ampoules, syringes, and medical devices in general, using thermoformable films such as PVC, PET, R-PET, Polystyrene (PS), PP, PLA, etc. Possibility to cold-form Aluminium based materials. Main Features: Balcony structure for easy access and cleaning High-speed positive automatic product feeding systems Available with or without a sealing station Arrangeble for in-line connection Quick, repeatable, and tool-free format change Thanks to the servo-assisted main transmission, the machine speed is adjustable from the main HMI within dedicated recipes Automated thermoformer machine. Forming material reel unwinding - preheating - forming - filling with laminated strips (robot) - applying and sealing tyvek lid - cooling - serialised printing - indexing - punching - feed sealed strips out to box packaging machine. Bodpfx Adjybcwtj Aodb

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total height: 2,100 mm, total width: 1,100 mm, total length: 1,300 mm, overall weight: 800 kg, REF: MM5446 Borelli Group S.r.L. inline rotary filling machine suitable for filling glass bottles. This is a standard 10-head rotary filler with complete CIP kit for cleaning, including dummy bottles and washing spray system. Also supplied with filler in-feed scroll and bottle handling parts for Bordeaux glass bottles. Technical specification: ✅ Model - RMC10. Bodpfxex Dbkco Ad Asdb ✅ Serial number - 18109. ✅ Date of manufacture - 2018. ✅ Speed - up to 1500 bottles/hour (for 750ml bottles). ✅ Throughput - 1300 litres/hour. ✅ Filling system - Pure gravity. ✅ Speed variator - Inverter. ✅ Voltage - 415 V / 50 hz / 3 phase. ✅ Pneumatic supply - 3-6 bar.

Condition: used, Year of construction: 2013, Additional title: high pressure homogenizing Capacity range: 600 l/h Bodpfxjvcq Edo Ad Asdb Pressure: 250 bar Cellular particle size: 1 μm cellular particle Length: ca. 2,2 m Width: ca. 2,5 m Height: ca. 1,9 m Operation / Control: Integrated in a ProLeit process control, the motor was controlled by an external frequency converter. Features: CIP-able, SIP-able

Condition: used, functionality: unexamined, Ferwood code: RU0011721 - Manufacturer code: BVN4-S- - Condition: Used - Functionality: Not tested - Compatible machine: - Upon request, we offer overhaul service, please contact us. 232KG 120X85X130 Bodpoylawrofx Ad Aodb

Condition: new, Year of construction: 2024, functionality: fully functional, Powerful and versatile panel saw packed with extra features Sliding table with 10-year warranty! - Anodized aluminum sliding table, running on hardened steel guides. - Crosscut frame complete with mobile aluminum fence for fast, precise positioning for angle cuts. - Extended outfeed table - Emergency stop push button on the front of the machine and on the side of the parallel fence. - Overload relay - Overhead saw guard with integrated dust extraction Ø 80 mm - Automatic brake on the main blade - Lockable main switch for the control circuit (110 V) - Manual right-hand side guide with position reading via metric scale, running on Ø 40 mm steel tube, and with micrometric adjustment. - Cutting capacity against parallel fence 1270 mm. Direct start of main motor - Three speeds for main blade - Scoring unit with independent motor and external setup and stop for quick repositioning of the scoring blade. The machine is compliant with CE standards. Additional features: - CompeX for angle cuts, integrated into the extension table, for quick conversion to angled cutting - Start/Stop switch on the end of the sliding table - Eccentric clamp - Crosscut fence with 2 LCD stops - 3rd LCD stop for crosscut fence Bsdpsyglr Dofx Ad Aedb

Condition: new, Year of construction: 2024, functionality: fully functional, SCM Panel Saw, SI 400 EP NOVA with tilting blade and sliding table - “READY” electronic control with 2 controlled axes Specification: - Lifting and tilting of the saw unit - Automatic height adjustment according to tilt angle Bodpfx Adsygll Ro Asdb - Manual, semi-automatic, and automatic with memory - Up to 99 programs - Calculator and hour meter - Tool data setting Optional equipment: - CompeX for mitre cuts, integrated in the sliding table for quick changeover to mitre cuts - Start/Stop switch at the end of the sliding table - Eccentric clamp - Crosscut fence with 2 LCD stops - 3rd LCD stop for crosscut fence

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 20250107, total length: 2,000 mm, total width: 1,900 mm, total height: 3,050 mm, overall weight: 1,000 kg, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, heating capacity: 24 kW (32.63 HP), warranty duration: 12 months, maximum load weight: 700 kg, workpiece weight (max.): 700 kg, cage diameter: 1,390 mm, Single-stage cleaning machine Principle of operation, machine with lifting door The tank of the cleaning machine is manually filled with tap water (optionally via the AR-2 automatic refill valve) and heated via heating elements and thermostat settings. The time settings for the washing, draining (optionally drying and steam extraction) phases are set via the “PROCESS TIMER”. The parts are placed on the loading grid or loading trolley and pushed into the cleaning cabinet. Optionally, for heavy loads, a conveyor belt (MIU / AIU) can be installed to transport the parts into the cleaning booth. The lifting door is closed, the machine is started and the washing pump displaces the cleaning liquid onto the objects to be cleaned via the rotary spray systems. The rotation of the upper and lower spray pipe is activated by the reaction force of the reaction nozzle located at one of the ends of the spray pipe. The rotation speed can be adjusted with a screw in the reaction nozzle. Optionally, the rotation of the upper spray pipe can be motorized and the spray pipes can be equipped with nozzles. After the washing time has elapsed, there is a short dripping time in which the used cleaning liquid is returned to the washing tank via the filter baskets. Optionally, the liquid from the washing stage can be filtered using a filter unit (EFG-6 or PP197). Optionally, an additional stage, such as pre-washing or rinsing, is possible using the fixed spray pipes NS-2 / NS-TEMP. In this case, the parts are rinsed with fresh water (cold or heated) which flows into the drain via the drain valve. Bjdjvvuzcopfx Ad Aodb Optionally, the parts can be dried after the cleaning process using a drying unit. After the cleaning process has been completed, the lifting door is left ajar for steam extraction. The steam from the cleaning booth is extracted using the steam extractor (DF-250S) or it can be condensed using the steam condenser (FX6002) and returned to the tank. Both accessories are optional and are not part of the standard equipment of the machine. After the steam extraction time has elapsed, the lifting door opens completely and the cleaning process is finished. Optionally, the lifting door can be equipped with a safety bar that automatically stops the door when it detects an object in the door opening. The cleaned components can be removed from the cleaning cabinet onto a loading platform or a loading trolley.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: PG20240001, total height: 910 mm, overall weight: 110 kg, total length: 830 mm, total width: 830 mm, type of input current: three-phase, workpiece weight (max.): 45 kg, tank capacity: 60 l, usable tank capacity: 15 l, input voltage: 400 V, workpiece width (max.): 160 mm, workpiece height (max.): 160 mm, outer diameter: 160 mm, workpiece length (max.): 160 mm, inner dimension height: 245 mm, inner dimension width: 280 mm, power: 1.1 kW (1.50 HP), input frequency: 50 Hz, warranty duration: 12 months, empty load weight: 110 kg, load capacity: 60 kg, Vibratory finishing machine for universal use for deburring and polishing. Suitable for small parts and series. Bdjdpfxsvgagxj Ad Asb Vibra-Line B60M circular vibrator with 60 l. Volume. The machine is coated with 20 mm. PU coating (polyurethane). With a capacity of 60 litres, the work bowl can hold up to 15 litres of workpieces and approx. 45 kg of sanding medium, depending on the design and size of the individual parts. The basic model of the ‘Vibra-Line B60M’ is equipped with a control cabinet with mechanical timer and process time control.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 20241202, total height: 860 mm, overall weight: 320 kg, total length: 1,170 mm, total width: 1,170 mm, type of input current: three-phase, tank capacity: 150 l, usable tank capacity: 100 l, input voltage: 400 V, workpiece width (max.): 170 mm, workpiece height (max.): 170 mm, outer diameter: 170 mm, workpiece length (max.): 170 mm, inner dimension width: 260 mm, power: 2.2 kW (2.99 HP), input frequency: 50 Hz, warranty duration: 12 months, load capacity: 60 kg, Equipment: rotational speed infinitely variable, The round vibrator Vibra-Line DK impresses with an open, curved container, which has a capacity of 150 liters. This model is equipped with an air-controlled automatic emptying system and a a sound-insulated lid, Bdjdpfx Asviu Ehod Asb which ensures convenient and quiet operation. The U-shaped inner container has a 22 mm thick polyurethane (PU) coating, which ensures exceptional resistance to process wear. The capacity of 150 liters allows for approximately 50 to 100 liters of metal parts per load, depending on their shape and size. The wide drum and low discharge height make it much easier to unload the processed parts. The machine is controlled by a frequency converter with infinitely variable speed control, which is operated via a 5.5-inch touchscreen. Process times, languages and speeds can be adjusted quickly and easily. and speeds can be adjusted quickly and easily. The control system also controls two external connections, which can be used for process water and compound dosing. The Vibra-Line 150DK circular vibrator is supplied as a plug-and-play solution and only requires a 16 amp CEE plug, 4 bar compressed air and a water connection for commissioning. a water connection for commissioning. Our devices comply with the EC machine/device directives and are supplied with manufacturer's declaration of conformity and CE mark.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 20250108, total height: 2,200 mm, overall weight: 700 kg, total length: 1,700 mm, total width: 1,300 mm, type of input current: three-phase, workpiece weight (max.): 75 kg, tank capacity: 120 l, usable tank capacity: 60 l, input voltage: 400 V, rotational speed (min.): 50 rpm, rotational speed (max.): 180 rpm, power: 4 kW (5.44 HP), input current: 16 A, warranty duration: 12 months, Equipment: rotational speed infinitely variable, The Turbo-Line 120 “S” model has a stainless steel ejection box mounted directly on the deburring machine. When the bowl lowers, the chips fall through a grid while the parts to be deburred remain on top. This Turbo-Line machine includes a 120-litre drum with vertical, straight sides and a separate base that rotates at an adjustable speed, normally between 115 and 135 rpm, but adjustable from 50 to 180 rpm. During operation, the grinding bodies inside the bowl create a uniform, spiral movement reminiscent of a twisted sausage. Bedpfx Aevvu Snsd Ajdb All areas of the machine that come into contact with the product, including the drum and the base, are coated with at least 26 mm of yellow polyurethane (PU) to ensure a long service life. The 120 liter work bowl can process up to 50-60 liters of product per batch, depending on the shape and size of the parts. The deburring parameters such as time and speed are individually controlled via a manual touch screen. The addition of water and compound is done via a manually adjustable ball valve, which is included in the delivery. The finished products are discharged by tilting the bowl, a process controlled via the touch screen. The emptying speed is also adjustable via the frequency converter on the touch screen.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 20241204, total height: 905 mm, overall weight: 550 kg, total length: 1,200 mm, total width: 1,200 mm, type of input current: three-phase, tank capacity: 220 l, usable tank capacity: 110 l, input voltage: 400 V, workpiece width (max.): 200 mm, workpiece height (max.): 200 mm, outer diameter: 200 mm, workpiece length (max.): 200 mm, rotational speed (min.): 1,400 rpm, inner dimension width: 240 mm, power: 4.5 kW (6.12 HP), input frequency: 50 Hz, warranty duration: 12 months, load capacity: 100 kg, Vibra-Dry DK 200 WT maize dryer with pneumatic emptying and steel base. The high-quality Vibra-Dry DK 200 WT maize/grain dryer with a working volume of 220 liters is for sale. This versatile machine is perfect for drying and polishing with crushed corn granules, resulting in a flawless and shiny surface. Main features: Working principle: The moist parts are automatically transported from the circular vibrator via the separating table into the dryer. Pneumatically controlled outlet valve: For automatic emptying after drying. Coating: Inner walls and inlet and outlet area with durable 2-component PU coating to minimize wear and reduce noise. Temperature control: Adjustable between 30°C and 50°C via manual control in the control cabinet, with levels for 0%, 50% and 100%. Automatic temperature maintenance by switching the heating on and off. Technical details: Filling with approx. 10-15% crushed maize granules (25 kg recommended). Commissioning: Use of GM 16 or GM 20 maize grains required. Bdedpfxsvi Nhde Ad Ajb The machine is reliable, robust and ideal for farms that value quality and efficiency. Enquire now!

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Bsdpfx Adst R T Hcj Aedb Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: ready for operation (used), Year of construction: 2011, A complete pasta line with 2x Cappelletti forming sets is available. 1) Pasta Technologies Group SRL dosing and mixing unit for pasta ingredients such as flour, water, and micro-ingredients. 2) Combined mixer-sheeter Pasta Technologies Group SRL MASA 540, year of manufacture: 2022, dough sheet thickness range: 7mm–8mm, dough sheet width: 540mm, corrugated rollers: 3, pairs of smooth rollers: 1. 3) 2x forming machines GEA/Pavan MRW 540, year of manufacture: 2011, pasta types: Ravioli/Cappelletti, production output Ravioli/Cappelletti: 140/120 strokes/min, dough sheet width: 540mm, machine dimensions X/Y/Z: approx. 1800mm/1700mm/1300mm, weight: approx. 1200kg, filler frame weight: approx. 210kg. Includes 2x Cappelletti tools 3D. 4) Double conveyor belt and waste recovery unit. 5) Dough scrap return system Pasta Technologies Group SRL RS100 with cyclone. 6) Complete system control and management by Pasta Technologies Group QEHD. Documentation available. An on-site inspection is possible. Bsdpfjw Dfgkox Ad Aedb