Used Garant Face Mill 45° for sale (19,386)

Condition: refurbished (used), End mill Make Garant type EQ 753200 Slot milling cutter Corner milling cutter Giedsiuh Eyspfx Alxjt shank diameter 20 mm cutting length 38 mm used freshly ground and coated material HSS Co 8

Condition: good (used), Garant oil cabinet 145x72x75cm Design: Sturdy sheet steel construction with reinforced hinged doors, lockable by sliding handle with pin cylinder lock. The cabinet body is equipped with a single pull-out safety device. Due to the single pull-out safety device, only 1 pull-out shelf can be opened at a time. The cabinet is thus largely secured against tipping. Drawer shelves and drawers can be accommodated in 25 mm increments. Oil cabinet, equipped with plastic oil cans Drawer/extension shelf load capacity: 200 kg Gisdpfok Shv Hsx Alxst Drawer extension (partial/full extension): 100 % Drawer extension: Pull-out stop Height adjustment in increments: 25 mm pin cylinder lock: modular plug-in insert HxWxD=145x72x75cm without key Item condition used UVP 3240,- € Further switch cabinets - new and used - you will find in our store! International shipping costs on request!

Condition: excellent (used), Year of construction: 2006, 45 linear meters SSI Schäfer Palflex pallet racking incl. mesh shelves Used item, good condition, see photos Year of manufacture: 2006 Height: approx. 6.5 m Depth: 120 cm Bay load: 12,000 kg Galvanized frames Red beams Mesh shelves included! 2 pieces of mesh per 2.7 m beam length Asking price: €7,490 net ex stock Offer includes: + 17 pre-assembled frames, 120 cm deep, approx. 6.5 m high + 96 beams, 2.7 m long, 1,500 kg shelf load capacity with evenly distributed load + 192 locking pins + 96 galvanized mesh shelves for 48 levels of 2.7 m beam length each + 68 concrete anchors + Load capacity signage Goods are in stock. Transport and installation available on request. Inspection possible at any time by appointment. Further information on request. Godokx E Ryjpfx Alxeit Always over 5,000 linear meters of pallet racking of various manufacturers in stock. (Subject to changes and errors in technical data, information, and prices. Intermediate sale reserved! See our terms & conditions. All prices excl. VAT ex stock) Purchase / Sale We are constantly looking for and offering numerous items from various sectors • Swept clean business clearances • Business liquidations • Fast – flexible – efficient! We also clear out and/or dispose for insolvency administrators. Please contact us with a brief description; we will get back to you promptly. To visit our website, please click on our logo!

Condition: used, Universal Tool Milling Machine ORADEA EURO-MILL STIMIN (Romania) Model FUS 32 Gsdpfxox Hkd Ho Alxjit Serial No. 5591 Year of construction: 2009 Travel: X: 560 mm, Y: 320 mm, Z: 400 mm Table size: 950 x 450 mm Tool holder (vertical head): ISO 40 - M16 Tool holder (horizontal spindle): ISO 40 - S20x2 (Deckel-compatible) Spindle speed: 25-2000 rpm, 18 steps Feed rate: 5-400 mm/min, 18 steps Rapid traverse: 1400 mm/min Main spindle motor power: 3 KW Electrical connection: 400 Volt, 50 Hz, 10 KW - 3-axis digital readout and linear glass scales by HEIDENHAIN, type ND 780 - Vertical milling head with quill, swivels +/- 90° - Quill travel at vertical head: 100 mm - Manual tool clamping with M16 thread - Counter bearing for horizontal milling with Ø 48 mm bearing bush - Central lubrication - Electrical control cabinet mounted on machine side - Coolant system integrated in machine base - Machine lamp - Including 2 tool holders - Operating manual with electrical diagram Required space (L x W x H): 1800 x 1600 x 1800 mm Weight: 1650 kg Very good condition

Condition: good (used), Single Head Capstan Block Wire Drawing Machine Maximum Inlet Wire's Diameter: 30 mm Giedet Ixkzjpfx Alxot

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Z-axis: 500 mm, For sale is a presetting device from the brand Garant, model VG1. The measuring system is in very good condition and ready for immediate use. Technical data: Year of manufacture: 2010 Measuring range X-axis: 400 mm Measuring range Z-axis: 500 mm Measuring accuracy: 1 μm Spindle mounting: SK50, SK40, VDI40, VDI30 Transport and loading can be organized throughout Europe upon request and for an additional charge. Prices are subject to VAT. Viewing is possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Godpfxexf T R Rs Alxeit Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you wish to sell yours? For further information or contact options, please visit our website.

Condition: excellent (used), Professional tool holders from the renowned brand GARANT (Hoffmann Group). Model 300230 6 SK40-6-100 – clamping diameter Ø6 mm, length 100 mm. • SK40 taper – CNC standard • Clamping diameter Ø6 mm • Holder length 100 mm • Maximum rotational speed 25,000 rpm • High precision and clamping stability • Used, fully functional and ready for work. -- PRICE LISTED FOR 1 PIECE -- Gijdpfew Sy D Eex Alxjt

Condition: used, Year of construction: 2014, length 1200 mm width 800 mm Gsdpev Ig Acsfx Alxsit Thickness 160 mm

Condition: good (used), Aluminium measuring table with 50 mm aluminium plate and drawer cabinet Type: Measuring table with aluminium measuring plate Dimensions: 80 cm wide, 75 cm deep and 95 cm high (2.26 cm high with construction) Aluminium plate: 5 cm thick, with mounting threads Manufacturer drawer cabinet: Garant (Hoffmann Group) Number of drawers: 2 Material: aluminium Condition: used Gsdpfxjhvmkij Alxoit complete factory lock, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: good (used), mobile workbench, folding workbench, work table, assembly bench -mobile workbench: solid design -Width: 1240mm -Depth: 800mm -Height: 840mm -Weight: 56 kg Gedpfxjq Nqxpo Alxsit

Year of construction: 2013, condition: good (used), Computer monitor, screen, TFT industrial monitor, flat screen, industrial monitor touchscreen -Manufacturer: Pro-face, industrial monitor flat screen touchscreen -Type: FP3710-T42-U -Article No.: PFXFP3710T2AU -Model: 3580406-01 -Dimensions: 475/120/390mm -Weight: 10.4 kg Gisdpfx Aleuh H Efsxet

Condition: good (used), Measuring probe, measuring probe, 3D probe, probe insert, measuring probe head, Digimatic Indicator, scanning head, measuring head, universal 3D probe -Manufacturer: Garant Eroglu, scanning head -Recording: Eroglu HSK 63-08-65 -Reading accuracy: 0.01 mm -Dimensions: Ø 63 x 310 mm Godpfx Aetu Rktelxsit -Weight: 0.9 kg

Condition: used, Shell end milling cutters, shell milling cutters, milling cutters, shell milling cutters -Manufacturer: Garant, shell end mill shell end mill Godpfx Aleh Tk D Texeit -Type: H 40Ø x 20 x 16 H C7 Sp.224mm -Intake: with fitting groove -Cutting material: HSS-Co5 -Dimension: Ø 40 x 20 x 16 mm -Weight: 0.1 kg

Condition: used, Shell end milling cutters, shell milling cutters, milling cutters, shell milling cutters -Manufacturer: Garant, shell end mill, shell end mill, 2 pieces -Type: H 75Ø x 35 x 27 mm -Intake: with fitting groove -Cutting material: HSS-Co5 -Price: complete -Dimension: Ø 75 x 35 x 27 mm Gisdpfsh Tk Ddox Alxet -Weight: 0.7 kg/pc.

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head -Diameter: Ø 100 mm Gisdpfsb A Ihdsx Alxjt -Number of teeth: 6 -Indexable inserts: Carbide -Recording: SK50 -Weight: 4.5 kg

Condition: good (used), Workbench, work table, assembly bench, assembly table, work table -Manufacturer: Garant, workbench with base cabinets / solid construction -Worktop: 1500/700/H855 mm -Drawer cabinet: 5 drawers, layout/height see photos -Base cabinet: with trim -Transport dimensions: 1500/700/H855 mm -Weight: 170 kg Giodpoxzzfusfx Alxot

Year of construction: 2017, condition: used, Setup station, pallet changing system, pallet changer, pallet storage, tool changer chain, chain magazine, tool changing system, tool magazine -Setup station with: Garant ZERO CLAMP G-11886 -Manufacturer no.: 101545300002672 - 21063 1721559 -Dimensions: 400/400/H810 mm -Weight: 232 kg Giedpfjflk Hpjx Alxjt

Condition: used, mobile workbench, folding workbench, work table, assembly bench -Width: 760 mm -Depth: 695 mm Gedpod A Th Ejfx Alxoit -Height: 840 mm -Number: 1x bench vice -Dimensions: 760/695/H840 mm -Weight: 49 kg

Condition: excellent (used), For sale: Professional GARANT SK40-6-50 tool holder for precise clamping of Ø6 mm tools. Product of the renowned Hoffmann Group / Garant – Germany, used in CNC machining centers. • Clamping type: SK40 (DIN 69871) • Size: Ø6 mm • Length: 50 mm • Catalogue number: 300210.6 • Balancing: G2.5 up to 25,000 rpm • High accuracy, stable clamping • Ideal for VHM end mills and drills as well as precision tools • Very good condition – tested, ready for use. GARANT tool holders represent the top tier in clamping technology – guarantee of quality and durability. -- PRICE PER PIECE -- Giodow Syzwjpfx Alxot

Condition: used, Other GARANT MM1300 CNC Gsdpfx Asx Tvi Uelxsit

Condition: new, functionality: fully functional, power: 55 kW (74.78 HP), Year of construction: 2026, Ball Mill for Powder and Mining Plant: Structure, Function, and Technical Details A ball mill is a key grinding machine widely used in mining, metallurgy, cement, chemical, and powder-making industries. It is designed to grind various ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, preparing materials for flotation, magnetic separation, or leaching processes. In powder production, they ensure uniform particle size and high surface area for further processing. Working Principle The ball mill operates on a simple yet effective principle: as the cylindrical shell rotates around its horizontal axis, the grinding media (steel or ceramic balls) are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion causes both impact and abrasion, reducing the material to the desired fineness. The grinding process can be performed in dry or wet conditions depending on the application. Structural Composition A standard ball mill consists of several main components: Feeding part: Equipped with a feeder or screw conveyor to ensure uniform material input. Discharging part: Can be grate type or overflow type, depending on the discharge method. Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners. Transmission system: Includes motor, reducer, small transmission gear, and electrical control. Grinding media: Steel balls or ceramic balls of different diameters for efficient grinding. The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption. Technical Details Typical Specifications: Feeding size: ≤25 mm Discharge size: 0.074–0.4 mm Capacity: 0.65–615 t/h (depending on model and material hardness) Cylinder speed: 18–38 r/min Power: 18.5–4500 kW Liner material: High manganese steel, rubber, or alloy steel Grinding media load: 30–45% of cylinder volume Operating Modes: Dry grinding: Suitable for materials that must remain moisture-free, such as cement clinker, limestone, and quartz. Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity. Application in Mining Plants In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use. Common Applications: Gold, copper, iron, and zinc ore grinding Cement clinker and slag processing Silicate and ceramic powder production Coal and mineral powder preparation Conclusion A ball mill is an indispensable piece of equipment in both powder production and mining beneficiation plants. Its ability to grind materials into fine, uniform particles makes it vital for downstream processes such as flotation, sintering, and chemical reactions. Giodpfx Asq Nf U Eelxot

Condition: new, functionality: fully functional, Year of construction: 2026, Dry and Wet Ball Mill: Structure, Operation, and Technical Details A ball mill is a fundamental grinding device used in mineral processing, cement manufacturing, chemical production, and other industrial applications. It works by rotating a cylindrical shell filled with grinding media—usually steel balls—causing impact and friction that reduce materials to fine powder. Based on the grinding environment, ball mills are classified into dry and wet types, each suited for specific materials and process requirements. Working Principle Both dry and wet ball mills operate on the same mechanical principle. The rotating cylinder, driven by a motor through a gear system, lifts the grinding media and material along the inner wall. As the rotation continues, the balls fall under gravity, striking and grinding the material. The difference lies in the presence or absence of a liquid medium during grinding. Dry Ball Mill A dry ball mill is used when the material must remain moisture-free or when water could affect product quality. It is commonly applied in cement clinker, limestone, quartz, and refractory material grinding. The discharge can be either grate type or overflow type, depending on the desired fineness. Technical Features: Feeding size: ≤25 mm Discharge size: 0.075–0.4 mm Capacity: 0.65–90 t/h Liner material: High manganese steel or wear-resistant alloy Drive system: Gear-driven or direct-coupled motor Dust control: Equipped with air exhaust and dust collector Advantages: Suitable for materials sensitive to moisture No drying process required after grinding Lower corrosion risk and simpler maintenance Easier material classification and separation Limitations: Dry grinding produces more dust and heat, requiring efficient ventilation and dust collection systems. Wet Ball Mill A wet ball mill operates with water or another liquid medium added to the material. The slurry formed during grinding improves efficiency by reducing friction and preventing excessive heat buildup. It is widely used in ore beneficiation, ceramics, and chemical industries. Technical Features: Feeding size: ≤25 mm Gsdoq Nx Alepfx Alxjit Discharge size: 0.074–0.2 mm Capacity: 0.65–615 t/h Liner material: Rubber or high-chromium steel Discharge method: Overflow or grate type Auxiliary equipment: Classifier, pump, and thickener for slurry circulation Advantages: Higher grinding efficiency and finer particle size Reduced dust and noise levels Continuous operation suitable for beneficiation circuits Better control of particle uniformity Limitations: Requires drying if the final product must be in powder form and involves more complex slurry handling. The selection between dry and wet grinding depends on the material characteristics, downstream process, and environmental conditions. Dry mills are preferred for materials that must stay moisture-free, while wet mills are ideal for fine grinding and slurry-based processes. Conclusion Dry and wet ball mills share the same mechanical structure but differ in their grinding environment and application scope. The dry type offers simplicity and low maintenance for moisture-sensitive materials, while the wet type provides higher efficiency and finer output for mineral and chemical processing. Understanding their technical parameters and operational differences ensures optimal equipment selection, improved productivity, and reliable performance in industrial grinding operations.

Condition: good (used), Year of construction: 2001, Specifications Manufacturer OKUMA Model MX-45-VAE Year 2001 Condition Used Controls OSP - U100M X-way 762 mm Y-way 460 mm Z-way 450 mm Total power requirement 35 kVA Machine weight approx. 5000 KG Control OSP - U100M Axis x 762 mm Axis y 460 mm Axis z 455 mm Spindle speed range 50 - 7 000 rpm Atc TOOL BT 40 Tool magazine 20 pcs. Description LAST SERVIS ON SPINDLE ON 2019 - ( BRAND - NEW SPINDLE) COST OF COMPLETE SERVICE 35000 EUR. MACHINE WAS WORKING FROM THAT TIME ONLY HALF YEAR. WE ORGANIZE FOR CLIENT AS WELL TRANSPO Make OKUMA WITH A NEW SPINDEL IN 2019 - RUNS ONLY 6 MONTHS AFTER WAS CHANGED MOTOR AND SPINDLE type MX 45 VAE Year of manufacture 2001/3 CONTROLS: OSP - U100M Technical Details x-way 762 mm y-way 460 mm Gijdpfx Alevkym Tsxjt z-way 450 mm total power requirement 35 kW machine weight approx. 5000 KG Type: MX - 45 VAE Control: OSP - U100M working range: Axis X: 762 mm Axis Y: 460 mm axis Z: 455 mm Spindle speed range: 50 - 7 000 rpm VARIABLE SPEEDS ATC: TOOL BT 40 TOOL MAGAZINE 20 TOOLS tool magazine: 20 pcs. Total power requirement: 35 kVA LAST SERVIS ON SPINDLE ON 2019 - ( BRAND - NEW SPINDLE) COST OF SERVICE OWER 35000 EUR , MACHINE WAS WORKING FROM THAT TIME ONLY HALF YEAR. WE ORGANIZE FOR CLIENT AS WELL TRANSPORT

Condition: excellent (used), Year of construction: 2001, AN VERY RARE OPORTUNETEY TO BUY AN EXCELLENT MACHINE WITH HUGE AMOUT OF TOOLINGS, DRAWERS, CLAMPING EQUIPMENT... CNC BORING MILL WOTAN RAPID 1 RETRIFITTED 2001 WITH HUGE AMOUNT OF OVER 450 TOOLING VERY LOW HOURS WORKING TIME DATA: CONTROL ON: 8001 H MACHINE POWER ON: 13692H PROGRAM RUN: 4650 H SPINDLE S1 TIME: 4690 H Gsdpfx Asvkkf Hslxjit AXIS TIME: 4568H HYDRAULIC ON TIME: 12702 H WE OFFER AN STUNNING EXCELLENT CONDITION WOTAN CNC RAPID 1 WITH HUGE AMOUNT OF TOOLINGS, FOR A SPECIAL STAINLESS WORK. MACHINE HAVE HEIDENHAIN 530 CONTROLS TECHNICAL DETAILS: SPINDLE SPEED : 6,3-1600 U/Min SPINDLE MOVE : Y AXIS : 1250 mm DRILLING SPINDLE MOVE: Z AXIS: 600 mm W : 1000 mm X : 2000 mm B: 360.000 DEGREE SPINDLE DIAMETER: 105mm TOOL HOLDER: ISO 50 WITHOUT TOOL CHANGER CLAMPING: HIDRAULIC MAX TABLE LOAD: 6000 KG TABLE: 1120 X 1400 NUT -BILD 7 ; 22H7 INDEXING 4 X 90 DEGREE TOTAL WEIGHT: 16000 KG DIMENSION OF MACHINE: LENGHT 4800 X BREIT 4665 X HEIGHT 4200

Condition: new, power: 55 kW (74.78 HP), Year of construction: 2026, A hammer crusher is a machine that uses high-speed rotating hammers to crush and break materials into smaller pieces. It is commonly used in various industries, including mining, cement, construction, metallurgy, and chemical processing. The basic principle of a hammer crusher involves a central rotor with hammers or blades that rotate and impact the material being crushed against a hard surface. Here are the key features and components of a typical hammer crusher: 1. Rotor: - The rotor is a central component of the hammer crusher. It usually consists of a shaft with multiple discs or hammers attached. - The rotor's rotation causes the hammers to swing outward, impacting the material. 2. Hammers: - Hammers are the striking or crushing elements attached to the rotor. They can be fixed or pivotally attached. - The material is crushed as the hammers impact it, generating kinetic energy. 3. Casing or Housing: - The casing or housing encloses the rotor and hammers, providing structural support and safety. - It also serves to contain the crushed material and direct it to the desired discharge point. 4. Grate Bars or Screens: - Positioned at the bottom of the crusher casing, grate bars or screens control the size of the crushed material by allowing smaller particles to pass through while keeping larger ones inside for further crushing. 5. Impact Plate: - Located near the bottom of the crusher, the impact plate absorbs the impact energy generated by the hammers and prevents excessive wear on the casing. 6. Drive System: - The hammer crusher is powered by a motor connected to the rotor through a drive belt or coupling. Gijdpfxsq I Nxds Alxot - The motor provides the necessary power to rotate the rotor, enabling the hammers to crush the material. 7. Adjustable Discharge: - Some hammer crushers feature an adjustable discharge, allowing users to control the size of the crushed material by adjusting the gap between the impact plate and the hammers. 8. Applications: - Hammer crushers are used for crushing a variety of materials, including coal, limestone, gypsum, aggregates, and various minerals. - They are commonly employed in the mining industry for primary and secondary crushing of ore. - In the cement industry, hammer crushers are used to crush limestone and other materials before they are mixed into the raw meal. 9. Maintenance and Safety: - Regular maintenance is essential to ensure the efficient operation of a hammer crusher. This includes checking and replacing worn hammers, inspecting the rotor, and lubricating moving parts. - Safety features, such as access doors and safety guards, are typically incorporated to prevent accidents during operation and maintenance. Technical Specifications (Typical MINGYUAN Series) Model Category,Max Feed Size,Capacity (t/h),Motor Power (kW),Rotor Speed (rpm) Small (PC-400), ≤100mm, 5 – 10, 11, "1,000" Medium (PC-800),≤200mm, 20 – 50, 55, 750 – 900 Heavy (PC-1200),≤350mm, 80 – 110, 132 – 160, 600 – 750 Heavy Hammer,"≤1,200mm", "500 – 1,000+ ","400 – 1,000" ,Variable