Used Gernal Horizontale Procesketel, Type Mbk 1200 for sale (40,607)

Condition: used, all stainless steel suitable for thermic oil heating 210 kW thermic capacity frying length 3.000 mm belt width 1.000 mm adjustable speed infeed and outfeed conveyor Chedpfx Ahez Ixxvemec isolated canopy 10 kW sediment removal system filter oil level control low - high oil circulation pump suitable for CIP-cleaning electrical hoists dimensions (l x w x h) : ± 6.650 x 2.300 x 3.500 mm

Condition: good (used), Perfecta BSH 5-1200 Paper Stack Lift with Sidewall This machine is in excellent technical and visual condition. It’s practically unused. It features an adjustable sidewall for easy stacking. Stylish design. 1200 kg lifting capacity Chsdpfszw Tz Tox Ahmsc Plate size: 990 x 1350 mm 380V power supply Weight: 800 kg The lift is very easy to move, mounted on wheels. The control panel is adjustable to the right and left. Photocell-controlled lifting. Quiet hydraulic unit.

Condition: repair required (used), Year of construction: 2000, functionality: not functional, power: 7.5 kW (10.20 HP), spindle diameter: 40 mm, overall weight: 1,100 kg, Equipment: documentation/manual, HOFMANN table milling machine, type TF1200, with a sliding carriage on the side and an extendable table support, with electric height adjustment. Unfortunately, the programs on the control unit cannot be saved. Otherwise, the machine is in very good condition. Csdpfx Aez Eztkohmehc

Condition: used, Year of construction: 1994, functionality: unexamined, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 900 mm, table width: 700 mm, table length: 1,800 mm, overall weight: 10,500 kg, Anayak VH 1800 bed milling machine with 4th axis Control system: Heidenhain TNC 415 B Chsdpjypxtajfx Ahmjc 4th axis as a rotary table, table diameter approx. 530 mm Tool holder: SK 50 Machine is operational; a test run is possible. However, it is sold without any warranty. Sale by offer/bid. Machine is still connected to power. Overhead crane available for loading.

Condition: used, all stainless steel water circulation net belt length ± 10.500 mm net belt width 900 mm adjustable speed lifting unit with electrical hoists dimensions (l x w x h): ± 11.500 x 1.600 x 4.000 mm + "IGEFA" tube heat exchanger Type 161U-159-159 380 kW + Conveyor belt with flights Chsdez Imvispfx Ahmjc belt width: 800 mm distance between flights: 190 mm height of flights: 50 mm

Condition: ready for operation (used), Year of construction: 2005, operating hours: 6,247 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 900 mm, table load: 3,000 kg, workpiece weight (max.): 3,000 kg, Bed milling machine, type Anayak VH-2200, for sale as shown in the photos. The machine is in perfect working order and can be inspected while running. Cedpjz Ig Hzofx Ahmjhc It was mainly used for processing aluminum and plastic (mold and fixture construction). It operates very smoothly and offers high dimensional accuracy. Upon request, we can also send functional videos. - Type: Anayak VH-2200 - Heidenhain control system - Year of manufacture: 2005 - X-axis travel: 2000 mm - Y-axis travel: 920 mm - Z-axis travel: 900 mm - Table surface area: 2200 x 750 mm - Table load capacity: 3 tons Number of T-slots: 6 T-slot width: 18 mm T-slot spacing: 120 mm Spindle mount: ISO 50 DIN 69871-B Machine operating time: 26,553 hours Spindle operating time: 6,247 hours Dismantling and removal can be carried out by us for an additional charge. Please do not hesitate to contact us if you have any questions.

Year of construction: 2013, condition: like new (used), functionality: fully functional, machine/vehicle number: 42L01-A00-00, Masuko Sangyo Ceren Miller MKCL8-15 Dry DAU - air-flow type ultra-fine micronizer Specifications Model MKCL8-15 Motor 11Kw , 3P Standard capacity 10~30kg/Hr Chsdpfx Ajz D A A Dshmjc External dimensions W×L×H 1000×1400×1800mm Weight 280kg

Condition: ready for operation (used), Year of construction: 1996, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 2,500 rpm, Heidenhain TNC 407 control unit Table: 2000 x 700 mm Cjdpfx Ahezbrkpjmohc Travel: 2000 x 800 x 800 mm Spindle: SA 50 Maximum spindle speed: 2500 rpm Weight: 10000 kg

Condition: good (used), “Bakker Magnetics LD400.1200/1200/7” for Sale Chedpfjw R N Udjx Ahmoc Manufacturer: Bakker Magnetics Type: LD400.1200/1200/7 Magnet L x W x H: (1.200 + 1.200=) 2.400 x 1.200 x 400mm. (130mm. Transportmagnet) AA.: Ca. 3.050mm. Belt widthness: 1.400mm. Weight: 4.850 KG. Year of Manufacture: 2019

Year of construction: 1997, condition: used, functionality: fully functional, machine/vehicle number: 8116, For sale is a robust and versatile vertical console milling machine (turret mill) from the renowned Taiwanese manufacturer King Rich, model KR-V3000V, manufactured in 1997. The machine is based on the proven Bridgeport concept and is characterized by its extremely flexible geometry: the milling head can be tilted, and the upper arm can be rotated and moved. This makes it the ideal all-around machine for repair shops, jig and fixture manufacturing, workshops, or demanding users. Technical data & details: • Manufacturer: King Rich Industries Co., Ltd. (Taiwan) • Model: KR-V3000V • Year of manufacture: 1997 • Control: Conventional (manual) Chedpfx Asz Hi S Dehmsc • Spindle mount: ISO 40 (standard) • Main motor power: 3.75 kW (total connected load 5.16 kW) • Power connection: 415 V / 3 phases (high voltage) • Weight: approx. 1,600 kg (massive cast iron body) • Equipment: Automatic table feed (X-axis) installed Condition: The machine is in its original, as-is condition, directly from operation, and shows the typical wear and tear of a workshop machine. The guide rails do not show any deep rust visually. Inspection & Functionality: The machine is fully functional and can be inspected and tested on-site with power connected after prior arrangement. The scope of delivery includes the operating manual and a box with spare parts. Price: €3,600 payable in advance Note for collection: The buyer is responsible for the transport and loading. Assistance with loading can be provided.

Condition: used, Year of construction: 2004, x-travel 4000 mm y-travel 1200 mm z-travel 1500 mm Csdpfxjz It Dtj Ahmehc table-size 4200 x 1100 mm tool adaptor SK 50 | turning speed range 5000 U/min power requirement 37 kW control Heidenhain iTNC 530 table load 6,0 t milling head -swivable A= 1,0°/ B= 1,0° Grad tool change unit 60 SK 50 range L-W-H 11,0 x 5,0 x 4,0 m Universale CNC- bed milling machine with extra round table H/V - internal coolant - filter system - oil cooler - external handwheel - chipconveyor

Condition: used, all stainless steel belt width 1.000 mm adjustable height finished product from 2 up to 35 mm speed of the belts is separately adjustable with outfeed belt mobile Codjz H Ummepfx Ahmehc 3 kW dimensions (l x w x h) : ± 2.400 x 1.200 x 1.500 mm

Condition: refurbished (used), Year of construction: 2022, operating hours: 1,518 h, functionality: fully functional, power: 260 kW (353.50 HP), year of last overhaul: 2026, Basic Inventhor 6 package: Load-Sensing System Fuel tank, 500 liters Longitudinal belt: belt length 2,900 mm, belt width 800 mm centrally arranged lubrication strips 24V electrical control system - additional electric pump for operating the following functions when the engine is stopped: raise/lower/tilt rear belt, open/close comb flap, open/close comb, raise/lower folding chute complete radio remote control Chjdpfexx N Dgsx Ahmjc large side GRP maintenance doors easy-to-maintain engine compartment LED lighting package: engine compartment and rear hydraulically reversible fan wheel three-sided loading protection folding chute fire extinguisher maintenance ladder toolbox acoustic start-up warning Doppstadt telematics system paint: RAL2011 traffic orange Additional equipment: Drive train 260 kW - EV 2-axle semi-trailer chassis Shredding system Size L - 20 teeth Additional hydraulic connection 35 - 80 l/min Hydraulic drive Rear belt 7 m Over-belt magnet, neodymium Frame for over-belt magnet, 7 m Delivery date will be agreed upon.

Condition: used, Year of construction: 2003, x-travel 1250 mm y-travel 500 mm z-travel 500 mm Control Heidenhain tnc 124 serial number 5277 Chodpjz D Iu Esfx Ahmsc table size 1800 - 360 mm taper ISO 50 weight of the machine ca. 3 t

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details x-travel 1200 mm y-travel 600 mm z-travel 600 mm Control Heidenhain iTNC 530 Chjdpfez D Amvex Ahmsc spindle speed: 6000 1/min. spindle taper CAT-50 ISO spindle drive (S1) 10 kW table surface area 1300 x 600 mm table load 1200 kg feed speeds 1-10000 mm/min rapid travel x/y/z 20/20/15 m/min distance table - lower edge spindle 125-725 mm total power requirement 25 kVA weight of the machine ca. 7,5 t dimensions of machine 3600 x 2300 x 3000 mm Additional information Equipped with: * CNC control Heidenhain iTNC 530 * Electr. portable handwheel * Spindle oil cooler * Tool changer 24-pos., double arm changer - Max. tool diameter 80/150 mm - Max. tool length 250 mm - Max. tool weight 8 kg * Preparation for hydraulic machine vice * Preparation for 3-D measuring probes * Chip conveyor * Coolant system, coolant through spindle 20 bar * Machine documentation Working hours (date 29. July 2026): - Control on: 60.822 h - Machine on: 59.602 h - Program cycle: 22.283 h - Spindel on: 19.522 h

Year of construction: 2018, condition: excellent (used), functionality: fully functional, For sale are 10 GARANT ZeroClamp clamping devices, type 10012. The clamping devices are used, in good condition, and fully functional. New price per unit: €661.20 plus VAT. Available for sale individually or as a complete package. If you are interested or have any questions, please do not hesitate to contact us. Inspection possible by appointment. Shipping and inspection are possible! Product details Technical data Series: ZeroClamp Manufacturer's designation: ZeroClamp clamping device, type: 10012 Clamping device diameter: 120 mm Maximum clamping force: 25 kN Material: Steel Indexing hole available: no Product type: Clamping device Identification & Classification Article number: 360040 10012 EAN / GTIN: 4045197415820 Manufacturer's number: 360040 10012 Cedpfez E Rdfox Ahmshc Description Design: All components are made of stainless or corrosion-resistant steel. The zero-point clamping of the GARANT ZeroClamp system is an important function for modern manufacturing systems, especially in automated manufacturing. Thanks to a special contact interface, it guarantees precise and reliable zero-point repeatability. The pneumatic clamping force of the system holds workpieces securely in the desired position, allowing for quick and accurate workpiece changes without re-positioning. This reduces setup effort and increases productivity. The zero-point clamping of the GARANT ZeroClamp system is essential for efficient manufacturing processes. Learn more about the innovative technology of GARANT ZeroClamp and optimize your production. Application: For individual installation in clamping fixtures.

Condition: used, cooking length ± 13.000 mm belt width 600 mm all stainless steel with electrical hoist steam heated (steam generator not included): 780 kg/h (6bar) temperature distribution in 2 zones dimensions (l x w x h) : ± 14.400 x 2.000 x 2.700 mm adjustable speed Chedpez Imw Hefx Ahmec

Condition: used, Year of construction: 1985, Year: 1983–85 Condition: functional Machine description - Combined laminating machine for: - water-based dispersion lamination - thermal lamination Equipment: - Mabeg automatic feeder Chsdpoyxpbnjfx Ahmjc - Water heater (TW3) - Sheeter BAT 127 / BAT 102 - Jogger table Technical specifications: - Maximum format - 1100 × 1400 mm - Minimum format - 210 × 300 mm - Production speed - approx. 45 m/min - Paper weight range - 80–600 g/m²

Condition: used, all stainless steel belt width 1.000 mm adjustable height finished product from 2 up to 35 mm speed of the belts is separately adjustable with outfeed belt mobile 3 kW Chodpfx Asz H Ul Nehmjc dimensions (l x w x h) : ± 2.400 x 1.200 x 1.500 mm

Condition: used, all stainless steel nett belt length 4.500 mm nett belt width 600 mm overall dimensions (l x w x h) : ± 7.400 x 1.900 x 3.150 mm suitable for thermic oil heating (= 214 kW) with top hold down belt Chjdpfx Aoz Imvpshmjc adjustable speed sediment removal system electrical hoists

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 1,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 3,000 rpm, overall weight: 10,000 kg, Heidenhain TNC 426 control Table: 1400 x 700 mm Travel: 1300 x 800 x 800 mm Spindle: SA 50 Maximum spindle speed: 3000 rpm Weight: 10,000 kg Chedpfszbrilsx Ahmjc

Condition: used, “FED” Drum Coater Type Crumb breader for dry coatings all stainless steel belt width 400 mm adjustable speed min. 300 gr coating material adjustable angle fom 0 to 8° overall dimensions (L x W x H) : ± 4.400 x 1.450 x 1.800 mm infeed belt Cjdpfez Har Iex Ahmohc belt width 300 mm Elevating spiral screw

Condition: used, The GEA oil fryer is used for flash or deepfrying coated and uncoated products. It is suitable for meat, fish, poultry, cheese, vegetables, potatoes and vegetarian dishes. all stainless steel nett belt length 3.000 mm nett belt width 400 mm Chodpfx Aez Harnshmsc mesh width ± 10 mm suitable for thermal oil heating (= 115 kW) oil circulation pump level control adjustable speed infeed conveyor outfeed conveyor sediment removal system lifting unit with mechanical hoists suitable for fire protection overall dimensions (l x w x h) : ± 5.200 x 1.700 x 3.100 mm

Condition: refurbished (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 5-048.045, filter area: 84 m², filter pressure: 15 bar, cake thickness: 30 mm, total width: 1,820 mm, total length: 5,820 mm, total height: 2,550 mm, warranty duration: 12 months, year of last overhaul: 2026, number of chambers: 40, control voltage: 24 V, Equipment: documentation/manual, safety light barrier, For sale is a fully overhauled bridge-type chamber filter press from Passavant. Cedpjz D Earofx Ahmehc The pictures were taken before the overhaul. Chamber filter press – Manufacturer: Passavant with plate thickness: 76 mm, made of PP cake thickness: 30 mm volume: approx. 1160 l useful length: approx. 2800 mm dimensions: 1200x1200 mm overall dimensions: 5820x1820x2550 mm (l x w x h) tare weight: 2700 kg closed filtrate discharge plate transport: electric hydraulics: electric Please let us know if you are interested in this press. We will be happy to provide you with a customized offer. Price upon request.

Condition: used, Granit marble ATELIERS MAITRE Length: 2000 mm Width: 1200 mm Thickness: 400 mm Height on feet: 910 mm Class 2 Weight: approx 2 T Chjdpfxjz H Ixio Ahmsc