Used Gigant G2-800/2 for sale (82,952)

Condition: excellent (used), Year of construction: 2008, Injection Moulding Machine DEMAG System 800/1120-9500 Basic Information Manufacturer: DEMAG Model: System 800/1120-9500 Year of manufacture: 2008 Clamping Unit Clamping force: 8,000 kN Platen dimensions (horizontal × vertical): 1620 × 1500 mm Tie bar spacing (horizontal × vertical): 1120 × 1000 mm Minimum mould height: 500 mm Maximum mould height: 1050 mm Maximum distance between platens: 2080 mm Opening stroke: 1030 mm Ejector stroke: 350 mm Ejector force: 139 kN Maximum mould weight: 7,200 kg Injection Unit Screw diameter: 130 mm Injection volume: 7,300 cm³ Shot weight (PS): 6,640 g Maximum injection pressure: 1,300 bar Screw length: 20 L/D Electrical & Hydraulic Equipment Rated pump motor power: 110 kW Heater power: 79 kW Hydraulic oil tank capacity: 1,300 l Machine Dimensions and Weight Machine dimensions (L × W × H): 12.3 × 2.7 × 2.7 m Machine weight: 33,500 kg Control cabinet weight: 9,700 kg Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with the modern ESS servo drive system, which increases the energy efficiency of hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor via a frequency inverter, adjusting the motor’s rotational speed to the current demand during the production cycle. As a result, electrical energy is consumed only during the actual machine demand. Key Advantages - Up to 30% reduction in electricity consumption Gsdpfsyugctex Afuebu - Servo drive technology for the hydraulic pump - World-class and proven technology used in the plastics processing industry - Reduction of energy losses during idle operation - Lower heating of the hydraulic system - Longer service life of hydraulic components - Possibility of installation on existing hydraulic injection moulding machines The ESS system enables a significant reduction in machine operating costs while maintaining full production parameters.

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: A/18031, SCHULER - MSP2-800- 4,5x1,8-400 Kapasite: 800 ton Hava Tüketimi: 30 m³/saat Güç: 296 kW Üst Tabla Ebatları: 4500 mm x 1700 mm Alt Tabla Ebatları: 4500 mm x 1800 mm Pres Yükseklik: 7,5 m Pres En: 6,50 m Pres Genişlik: 4,50 m Dakikadaki Vuruş Sayısı(maksimum): 70 spm Çalışma Reglajı: 300 Kurs Değeri: 80-360 Gsdszxqz Topfx Afusbu Used machine

Condition: like new (used), Year of construction: 2006, Clamping force: 220 tons Opening stroke: 650 mm Mould height: 300 mm Clamping platen daylight: 950 mm Tie bar daylight: 570 x 570 mm Mould clamping plattens (b x h) : 795 x 795 mm Ejector stroke: 225 mm Screw diameter: 50 mm Screw stroke: 200 mm Gjdpezwlbfofx Afuebu Injection volume: 392 cm3 Shot weight: 359 g Injection pressure: 2000 bar Working hours: 10.444 Core pullers: 1x

Condition: excellent (used), Year of construction: 2013, operating hours: 19,500 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 45 mm, Very low hours Arburg 570 E 2000-800 moulding machine fitted with Wittmann Primus 16T robot Arburg 570 E 2000-800 moulding machine specs; Hours = 19,800 Year = purchased new in December 2013 Tonnage = 200 Screw diameter = 45mm Shot weight (g PS) = 291 Wittmann Primus 16T robot specs; Hours = very low Year = purchased new in June 2021 Gjdpsyxhaijfx Afujbu Travel = Z=2000mm, Y=1000mm, X=590mm comes with integrated conveyor and cell panels

Condition: good (used), Year of construction: 2006, Brand: GEMINIS Model: GHT4 G2 700x 2000 Cnc: FANUC 21 TB Distance between centers: 2000 mm Ø Swing over bed : 720 mm Ø Over carriage: 470 mm Gjdpoxdub Isfx Afujbu Spindle diameter : 104 mm Maximum piece weight between points : 2.560 kg Spindle nose: DIN 55027-11 Spindle speed: 0-1600 m/min Total power : 28 kw

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 50 h, total length: 1,000 mm, total height: 500 mm, total width: 500 mm, type of input current: AC, overall weight: 550 kg, temperature: 280 °C, ambient temperature (min.): 15 °C, ambient temperature (max.): 28 °C, positioning accuracy: 0.1 mm, wall thickness: 1 mm, space requirement length: 2,715 mm, space requirement height: 2,765 mm, space requirement width: 2,170 mm, High-performance materials: Best-in-class print heads With its nozzles, the STUDIO G2 is ready for printing with fiber-reinforced and other industrial-grade materials at maximum speed and precision. The specially designed extruder achieves a high level of detail with layer thicknesses as low as 0.1 mm on objects up to one meter long. This allows for more options for perfecting a part's mechanical properties. Optimal printing temperatures: The temperature-controlled build chamber The STUDIO G2's enclosed, temperature-controlled print chamber creates perfect conditions for printing with industrial-grade materials. The transparent doors allow users to visually monitor the printing process with safe and easy access to the print bed. User-friendly features such as automatic pausing when the housing is opened ensure a smooth and safe printing process. Independent Temperature Control: Heated Filament Chambers The STUDIO G2's integrated heated filament chambers ensure that the printing materials remain dry in a constantly controlled environment, guaranteeing print quality unmatched in this class. The filament chamber exceeds industry standards by offering temperature control independent of the print room. Gsdpfxswgbcyj Afuebu Optimal Print Temperatures: Fast-Heating Print Bed Low setup time thanks to a fast-heating print bed. Increased bed temperature up to 100°C improves adhesion for a wider range of materials. New inductive sensor for fast, precise semi-automatic bed leveling. Simple & Intuitive: The New Slicer The user-friendly BigRep "BLADE" slicing software allows for greater control over printing parameters and offers presets for all BigRep-compatible materials, enabling a quick, hassle-free start to print. BLADE is one of the fastest and most precise slicers on the market, specifically optimized for large-format printing. Large enough for every idea: The large print area Create space for innovation with the STUDIO G2's large 500 mm x 1000 mm x 500 mm print area, packed into a compact housing and with features optimized for fast, high-resolution printing of large-format, industrial-grade parts.

Condition: ready for operation (used), Year of construction: 2006, clamping force: 2,500 kN, screw diameter: 45 mm, Hydraulic injection moulding machine manufactured in 2006. This Arburg Allrounder 630S-2500-800/350 features a clamping force of 2,500 kN and a maximum mold height of 900 mm. It includes a screw diameter of 45/35 mm and a maximum injection volume of 195/140 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 630S-2500-800/350 machine we have for sale. Contact us for further details. • Tie-bar spacing (space between columns): 630 x 630 mm • Maximum mold height: 900 mm • Minimum mold height: 300 mm • Maximum injection volume: 195 / 140 cm³ (for 45 / 35 mm screw) Godpfx Afjz Dal Aousbu • Maximum injection pressure: 2,470 bar • Centering ring: 160 mm • Hot runner control: 3 zones • Core puller: 1 Additional equipment • Robot: Arburg Multilift H • 2x Moretto electric loader, Safety cage, Conveyor belt, Rotary table • 2x dryers with intake ducts are available for extra 1000€

Condition: excellent (used), For sale: Professional fire-fighting pump METZ TS 8/8 manufactured by METZ Feuerwehrgeräte GmbH Karlsruhe. The equipment is in very good visual and technical condition and comes from a fire brigade unit. The pump is powered by a Volkswagen type 122 engine with 25 kW output, renowned for its durability and ease of maintenance. A significant advantage is its low operating hours—approximately 66 hours, which is exceptionally low for equipment of this type. Technical specifications • Manufacturer: METZ Feuerwehrgeräte GmbH • Model: TS 8/8 • Standard: DIN 14410 • Year of manufacture: 1989 • Engine: Volkswagen type 122 • Engine power: 25 kW • Displacement: 1192 cm³ • Pump capacity: 800 l/min at 8 bar • Operating weight: approx. 190 kg • Hour meter: approx. 66 hours Equipment • Pressure and vacuum gauge • Hour meter • Work lights • Firefighting quick couplings Gbedpfx Aoyt H R Uefuju • Transport frame • Choke and throttle control Application • Volunteer and professional fire brigades • Water transfer from ponds, rivers, and wells • Agricultural operations • Fire-protection systems • Dewatering and water management duties Robust German engineering—very durable and easy to service.

Condition: excellent (used), Year of construction: 2020, clamping force: 2,000 kN, Equipment: documentation/manual, Clamping force: 200 t Screw diameter: 50 mm Distance between tie bars V: 570 mm Distance between tie bars H: 570 mm Gbjdpfx Asyfh Uljfueu Type: Horizontal Drive: Electric Hours: 34535 Available 3 units (2020-2019)

Year of construction: 2001, condition: excellent (used), machine/vehicle number: BO834, DEMAG KBK crane canopy crane runway with dimensions approx. 18x6m (6m bridge) Gbedpoupvyisfx Afuju This crane is available several times ! Payload / lifting capacity 800 KG - 0,8to Technical data of the system: Crane runway made of Demag KBK2 rails System is supplied complete: KBK rails, rail connectors, trolleys, end plates, brackets/hangers etc. Crane is with internal power supply incl. 800KG Demag DK chain hoist - lifting height approx. 3m Crane is disassembled and immediately available Used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, clamping force: 2,000 kN, Equipment: documentation/manual, Clamping force: 200 t Screw diameter: 55 mm Shot weight: 434 g Distance between tie bars V: 570 mm Distance between tie bars H: 570 mm Shot volume: 474 cm3 Platen dimensions : 795 x 795 mm Gbsdpjx Ir Ngefx Afusu Working hours: 25.969 h Type: Horizontal Drive: Hydraulic Equipment: 1x core puller Euromap 67

Condition: good (used), Year of construction: 2018, overall weight: 50 kg, total length: 830 mm, total width: 180 mm, total height: 150 mm, Make: CERAZIZIT Type: CORALINE HDG-2 Year: 2018 Length:830mm Width:180mm Gjdpfx Asz Aqy Dsfuobu Height:150mm Weight:50kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, WMW Heckert ZFWVG 250X800 No. 262122/42 Long thread and spline milling machine, also for gear hobbing. (Thread milling and spline shaft hobbing machine) Max. workpiece diameter: 250 mm (the machine can swing up to 500 mm over the bed/support) Milling length (Z-axis): 800 mm Godpfxszxqbys Afuobu Tailstock height above bed: 260 mm Spindle diameter (bore): 102 mm Max. module: Up to module 10 / 18 (depending on the specific head configuration) Spindle speed: 45 – 560 rpm Total power consumption: 9.5 kW Machine weight: Approx. 3,400 kg

Condition: used, faceplate diameter 900 mm height 150 mm Gbedszxt Naopfx Afueu 4 Stück weight of the machine ca. 0,45 t dimensions of the machine ca. 0,9 x 0,9 x 0,45 m Faceplate - Short taper size 11 - Bolt circle 235mm - Through hole 155mm

Condition: excellent (used), Year of construction: 2006, For sale are functioning and very well-maintained gas burners, brand Weishaupt: Weishaupt WM G30-1800kw, with gas manifold DUNGS DN65 Gedpfxewgkpis Afujbu Weishaupt WM G20-1600kw, with gas line Dungs DN65 1. Weishaupt WM G30/2-A - Output: 300 - 1800 kW - Connection pressure: 15 - 500 mbar - Design: ZM-LN - Year of manufacture: 2006 2. Weishaupt WM G20/2-A - Output: 250 - 1600 kW - Connection pressure: 15 - 500 mbar - Design: ZM-LN - Year of manufacture: 2008

Condition: used, Year of construction: 1997, - Manufacturer: SPS Gjdpfsy N Udvsx Afujbu - Model: Vitessa Star G2 - Machine type: Screen printing machine - Year of manufacture: 1997 - Equipment: • Mabeg feeder, model MS • SPS drying unit, type UV Top 1200, year of manufacture 1993 • SPS Rehmus explanation unit, type Autostack S-02, year of manufacture 1993 • Steel platform and checker plate on pallets • Control cabinet • Screen printing frames

Condition: used, Year of construction: 1987, functionality: unexamined, machine/vehicle number: 6215.101.00001B, pressing force: 12 t, Our HSM 12 Gigant is in its element wherever bulky cardboard, plastic films, or other materials need to be compacted. Thanks to the extremely large loading opening, the device can be filled simply and conveniently. The result is compact bales that are easy to transport. And if the press is urgently needed in another area of the company – not a problem: Thanks to its 4 wheels, it can be used anywhere and at any time. Gsdpjw Az E Tsfx Afuobu

Year of construction: 2007, condition: ready for operation (used), A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen spacing: 750mm, tie bar spacing X/Y: 420mm/420mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1700mm/2100mm, weight: approx. 3500kg. Documentation available. On site inspection is possible. Gedpeyddzljfx Afuebu

Condition: excellent (used), Year of construction: 2018, overall weight: 50 kg, total height: 150 mm, total length: 830 mm, total width: 180 mm, Metal cutting Tooling CERATIZIT - CORALINE HDG-2 MACH-ID 9707 Make: CERATIZIT Type: CORALINE HDG-2 Year: 2018 Length:830mm Gbjdpfx Afjz Dtzkjusu Width:180mm Height:150mm Weight:50kg Length:830mm Width:180mm Height:150mm Weight:50kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2001, Technical details: pressure: 250 t throat: 360 mm distance table/ram: 800 mm max. ram stroke: 500 mm ram speed - reverse: 390 mm/sec. ram speed - forward: 450 mm/sec. hydraulic-pressure: 280 bar connected load: 43 kW Gsdpfjxna Uzex Afusbu work speed: 11....50 mm/s operating pressure: 20 MPa total power requirement: 20,5 kW weight of the machine ca.: 17 t dimension machine xH: 3,9 x 1,9 x 4,0 m

Condition: used, Year of construction: 1984, Name: Used filter press Manufacturer: Netzsch Type: 800/32 Year built: 1984 Construction form: Side beam press Filter pressure: 15 bar Gbsdpfew Rb Ehox Afuou Press content: Approx. 480 Liters Cycle: Closed Filter area: approx. 34 m2 Plate size: 800 x 800 mm Number plates: 32 Plate material: Polypropylene Plate transport: Automatic Filter cloth washer: No Plate pack length: approx. 2000 mm Cake thickness: 30 mm Closing pressure: 350 bar Dimensions: L 4.500 x W 1.700 x H 2.000 mm Empty weight: approx. 5000 kg Accessories: A control cabinet, a hydraulic system, a light curtain & drip trays. Condition: Second hand Price: On demand

Year of construction: 2010, condition: ready for operation (used), A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen distance: 750mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2100mm, weight: approx. 3500kg, operating hours: 44117h. Documentation available. On-site inspection is possible. Gjdpfjyddy Usx Afusbu

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, LIQUIDATION SALE – COMPLETE STEAM BOILER SYSTEM – IMMEDIATE AVAILABILITY Due to the closure of the production facility, we offer for sale a complete industrial steam generation system based on a UNICAL BAHR’12 800 high-pressure steam boiler, manufactured in 2020. The system was used as a complete installation and is offered together with the burner, control system, water treatment equipment and fuel storage tanks. Main technical data • Manufacturer: UNICAL • Model: BAHR’12 800 • Year of manufacture: 2020 • Steam production capacity: 800 kg/h • Approximate useful thermal output: 545 kW • Maximum design pressure: up to 12 bar • Boiler type: horizontal fire-tube steam boiler • Fuel: light fuel oil • Condition: excellent, used Gjdpfx Ajy N Sq Hofusbu • Functionality: fully functional • Complete technical documentation available The complete system includes: 1. UNICAL BAHR’12 800 steam boiler 2. RIELLO RL70 two-stage oil burner 3. Electrical control cabinet with automation 4. Boiler accessories and safety equipment 5. Water treatment station 6. Two double-walled fuel tanks, each with a capacity of 5,000 litres The BAHR’12 series is designed for industrial steam generation and features a robust fire-tube construction with a wet-back combustion chamber. The system is suitable for industrial process applications requiring a reliable steam supply. Key advantages • Complete and ready-to-relocate boiler installation • Relatively recent year of manufacture – 2020 • Boiler, burner, controls and auxiliary equipment offered as one package • Water treatment equipment included • Total fuel storage capacity of 10,000 litres • Full documentation available • Immediate availability The equipment can be inspected at the production facility in Panoszów, Poland. Liquidation price: EUR 59,000 net, EXW, negotiable. Preference will be given to buyers able to complete the transaction and collect the equipment quickly. Additional photographs, technical documentation and information concerning dismantling and loading are available upon request.

Condition: used, Year of construction: 2005, Pressure 800 t distance between columns 2560 mm stroke 1050 mm Distance table/ram, stroke up 1870 mm Table surface area 2500 x 1730 mm Gbsdpfx Afezrpt Isuou pressure of drawing cushion in table 300 t Die cushion stroke in table 395 mm Die cushion area in table 2300 x 1300 mm Ram surface 2500 x 1730 mm Die cushion pressure in ram 63 t Die cushion stroke in ram 150 mm Side window 1000 mm Oil volume 4300 l Power capacity 200,0 kW Dimensions (WxDxH) 4,1 x 2,8 x 10,0 m Height above floor 7,0 m year of manufacture 1974 overhaul 2005: formerly type BZE 800, converted to ZE 800 by manufacturer with new ram and new cylinder mit ölhydraulischem Antrieb, hydraulischem gesteuertem Ziehkissen im Tisch und Stößel stored in dismantled condition - Video at seller’s site before dismantling available

Year of construction: 2006, condition: excellent (used), Fly wheel diameter : 800 mm Engine size : 4 Kw Tilt of table : 0 - 45 degree CoMaFer feeder with adjusteble speed, rubber feed wheel ( Year 2020 ) Maximum cutting hight : 680 mm Maximum cutting width : 750 mm Gbjdpfxolk Ilye Afuju Machine measures : L 1400 x W 1000 x H 2700 mm Request live video presentation on WHATSAPP