Used H+ Valves X Arn X Irn for sale (90,248)

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 630005, center height: 305 mm, center width: 1,000 mm, travel distance X-axis: 350 mm, travel distance Z-axis: 1,160 mm, controller model: KELCO 90, TECHNICAL DETAILS Centre height: 225 mm / 305 mm Centre distance: 1,000 mm Travel Z-axis: 1,160 mm Travel X-axis: 350 mm Max. workpiece weight: 200 kg Workpiece diameter: 449 mm Left grinding wheel diameter: 500 mm Left grinding wheel width: 80 mm Left grinding wheel bore: 203 mm Right grinding wheel diameter: 400 mm Right grinding wheel width: 40 mm Right grinding wheel bore: 127 mm B-axis swiveling range: +30° / -190° Max. grinding wheel speed: 1,720 rpm Peripheral speed: 45 m/s Workpiece spindle speeds from: 5 rpm Workpiece spindle speeds up to: 500 rpm Spindle taper: Morse taper 5 (MT 5) Tailstock quill taper: 4 Morse (MT 4) Tailstock quill stroke: 50 mm Feed rate X-axis: 8 m/min Feed rate Z-axis: 16 m/min Max. table tilt: -1° / +11° MACHINE DETAILS Control: KELCO 90 Total power requirement: 25 kW Connection: 50 Hz, 3x 380 Volt Dimensions & Weight Machine dimensions (L x W x H): 2,850 x 2,200 x 2,100 mm Control cabinet dimensions (L x W x H): 550 x 450 x 900 mm Pjdpfx Ajyhnrvjnyjrb Machine weight: approx. 6,000 kg EQUIPMENT 80 mm riser block Coolant system Automatic tool measurement KELSET Wheel dressing device Internal grinding device (without spindle) Set of flanges Set of grinding wheels Balancing arbor Lamp Magnetic chuck diameter (2x): 300 mm / 500 mm Electronic hand-held control panel

Condition: good (used), Year of construction: 1995, Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Venjakab, belt conveyor on solid base frame, without drive -Webbing: Type H 6.5 m -Belt width: 1985 mm -Conveyor length: 3 m -Transport dimensions: 3060/2430/H940 mm -Weight: 740 kg Prodpfx Aew Avpyonyob

Year of construction: 2009, condition: like new (used), Tuflin chick valve, DN 80, with pneumatic actuator and electric switching module Manufacturer: Xomox Pedod Rww Ispfx Anysrb Nominal size: DN 80 Material: 1.4408 (V4A) Pneumatic actuator: Part No.: 716301-5 Article No.: XRP-RO53800148KXD40 Year of manufacture: 2009 Pmax (psi): 5/70 QSP: 8 In very good condition! Tuflin chick valves, some unused, therefore in new condition!

Condition: new, sheet length: 1360sheet thickness: 3Standard Accessories: NC control system Programmable motorized backgauge with 750 mm travel Shadow line illumination 1 pcs squaring arm with scale 2 pcs sheet support arms 1 pcs sheet support arm (for models 1106, 1306, 1505) Finger protection Ball transfer table Pedpexx D Efjfx Anyjrb Easy front access blade gap adjustment Ballscrew mechanism Cut counter Portable foot control with emergency stop button Photocell safety sensor on rear guards

Condition: like new (used), Year of construction: 2016, machine/vehicle number: DN-KR29, DEMAG KBK overhead crane, dimensions approximately 24 x 6 m Load capacity / lifting capacity: 1 x 500 kg - 0.5 tons Technical data of the system: Overhead crane track made of Demag KBK2 / KBKII-H / KBKII-H-R rails Height of steel structure: 4.52 m (bracing) Top of steel structure (purlin): 4.38 m Bottom of steel structure (purlin): 4.24 m Bottom of crane track: 3.84 m Bottom of bridge: 3.6 m Hook height: 3.1 m External dimensions of steel structure (space requirement): 24 x 6 m Support spacing: 8.7 + 7.5 + 8.2 m Dimensions of overhead crane track: approximately 25 x 5.3 m The system is delivered complete: KBK rails, rail connectors Carriages, end plates, cable carriers, supports/hangers, etc. + complete steel structure (HEA140/U140) including Abus GM 500 kg chain hoist Pjdszv E Dkjpfx Anysrb The crane is disassembled and packed on a pallet. Item location: 75053 Gondelsheim Very good condition - almost new. See photos. Shipping by freight forwarder or collection only by prior arrangement. Demag KBK1, KBK2, and KBK3 rails are in stock!

Condition: used, functionality: fully functional, Year of construction: 1996, operating hours: 11,233 h, load capacity: 2,000 kg, lifting height: 5,500 mm, free lift: 1,800 mm, fuel type: diesel, mast type: triplex, construction height: 2,450 mm, drive type: Diesel, Diesel forklift Load center: 500 Mast type: Triplex Transmission: Hydrostatic Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Rear tire type: Superelastic Prjdpfx Anez Hg Nyjyob Description: Side shifter, 3rd valve, rear work light, front work light, half-cab, LED.

Condition: new, sheet length: 3060sheet thickness: 4messurements (LxWxH): 3700 x 2250 x 1400motor: 11weight approx.: 4000Standard Accessories: NC control system Programmable motorized backgauge with 750 mm travel Shadow line illumination 1 pcs squaring arm with scale 2 pcs sheet support arms 1 pcs sheet support arm (for models 1106, 1306, 1505) Finger protection Ball transfer table Easy front access blade gap adjustment Ballscrew mechanism Cut counter Portable foot control with emergency stop button Photocell safety sensor on rear guards Psdpfx Ansgickyeysrb

Condition: used, functionality: fully functional, Year of construction: 2006, operating hours: 13,137 h, load capacity: 3,000 kg, lifting height: 6,455 mm, free lift: 2,074 mm, fuel type: gas, mast type: triplex, construction height: 2,841 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Treibgas, Internal combustion engine forklift Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Hydrostatic / 2-pedal Condition: Ready for use and fully functional Technical condition: good Prsdpfsz Ecvgox Anyob Front tire type: Superelastic Front tire size: 7.00-12 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 23x9-10 Rear tire condition: 80 - 100% Description: Delivery includes a new FEM 4.004 inspection certificate. If you have any further questions, please call us. In addition to this model, we have approximately 150 other material handling vehicles in stock. Visit our website for leasing and financing options. We would be happy to provide you with a quote for delivery at favorable conditions. Trade-in of Linde equipment is also possible, even if you do not purchase a device from us. The stated operating hours were recorded at the time the listing was created. Subject to prior sale, changes and errors. Side shifter, pre-installed side shifter 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, full free lift, safety light, seat heating.

Condition: used, empty load weight: 5,980 kg, maximum load weight: 26,020 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 05/2008, loading space length: 7,500 mm, loading space width: 2,340 mm, loading space height: 1,450 mm, loading space volume: 25 m³, suspension: air, tire size: 385/65R22.5, color: grey, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel body, 2 axles, BPW axles, air suspension, ABS (anti-lock braking system), catwalk, tailgate, underrun protection, chute. Body: steel tipper body approx. 25 m³, 2 x 9t BPW axles, drum brakes! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Psdpfx Ajyx Iugenyjrb

Year of construction: 1994, condition: ready for operation (used), 1 used steam boiler ----- manufacturer : LOOS Gunzenhausen type : U-HD heating surface approx. : 20 qm capacity max. : 1.000 kg/h working pressure : 13 bar increased test pressure : 23,4 bar water contents low level approx. : 993 l Psdpfx Anslx Azyoyerb water contents full approx. : 1.365 l year of construction : 1994 1 pipe set blind equipped with Weishaupt oil burner, switch cabinet, feed water pump, eco AWT 3, 28 ltr,82 kW, 8,5 m², horizontal and the existing small and large fittings

Condition: used, Year of construction: 2009, fuel type: diesel, Due to the large number of unreliable emails, we will not be responding to them. Psdpjz Edv Usfx Anyerb WhatsApp: x Linde forklifts H80, H70, H45, H35 Gas/Diesel Various spare parts available "ERRORS, TYPOS AND PRIOR SALE EXCLUDED"

Condition: new, operating pressure: 160 bar, high-pressure hose length: 15,000 mm, input voltage: 400 V, overall weight: 111 kg, warranty duration: 24 months, TECHNICAL DATA OF THE KARCHER HDS 7/16 CXA WASHER: Model: HDS 7/16 CXA Manufacturer: KARCHER Country of production: Germany Series: Professional Condition: NEW Thread type: KARCHER !EasyLock series Power supply (~/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 310 - 660 Working pressure (bar/MPa): 30 - 160 Maximum pressure (bar/MPa): 160 Maximum water temperature (°C): 80 Connection power (kW): 4.4 Power cable (m): 5 Fuel tank (l): 15 Weight (kg): 126 Dimensions (length x width x height) (mm): 1260 x 650 x 920 Pedjv Tmx Ijpfx Anyjrb EQUIPMENT OF THE KARCHER HDS 7/16 CXA WASHER: Pressure gun: Karcher Professional !EasyForce Advanced High-pressure hose: Karcher Professional - Ultra Guard HD 15M series, DN6, 250BAR - !EasyLock Automatic high-pressure hose reel: Professional, originally integrated reel with a capacity of 15m - automatic winding. Spray lance: Karcher Professional 1050 mm !EasyLock Nozzle: Karcher Professional POWER pressure nozzle !EasyLock RELIABLE | DURABLE | ERGONOMIC Automatic hose reel ensures safe operation and convenient storage of the 15-meter Ultra Guard high-pressure hose with Teflon® coating eco!efficiency mode - economical and environmentally friendly, even during longer periods of use - Reduces fuel consumption and CO₂ emissions by 20%. Easily accessible water filter protects the pump from impurities in the water. SDS reduces pressure pulsations in the high-pressure system of the device and thus extends the life of all pump components on the high-pressure side. Built-in funnel for filling the cleaning agent prevents accidental spillage of chemicals. EASY!Force technology reduces the force needed to hold the gun trigger to zero. The device also has an EASY!Lock equipment mounting system that allows 5x faster equipment changes than a traditional thread system. The device is completely new and factory-packed

Condition: used, axle configuration: 3 axles, first registration: 06/2001, color: other, Year of construction: 2001, Empty weight: 6.000 kg Axle 1: left 8 mm right 6 mm Axle 2: left 7 mm right 7 mm Axle 3: left 8 mm right 12 mm We have the possibility to stack trailers! Pjdpezum T Djfx Anysrb

Year of construction: 2004, condition: excellent (used), 1 used quick steaming units ----- manufacturer : CERTUSS type : Universal capacity : 1.300 kg/h thermal output : 947 kW Prsdpfx Anei E Hztsyob working pressure : 10 bar test pressure : 57 bar water contents approx. : 155,7 ltr heating surface : 23,7 m² CE mark : CE 0035 year of construction : 2004 yoc heating coil : 2018 / 2021 equipped with Certuss oil burner, oil throughput 40-80 kg/h, switch cabinet built on boiler body, feed water pump and the existing fine and coarse fittings.

Condition: excellent (used), Year of construction: 1997, 1 used steam boiler ----- manufacturer : LOOS Gunzenhausen type : U - HD 1250 heating surface approx. : 20 qm boiler capacity max. : 1.250 kg/h working pressure : 16 bar increased test pressure : 28,8 bar water contents low level approx. : 993 l water contents full approx. : 1.365 l year of construction : 2000 Podpfx Ast E Rwnjnyerb equipped with Weishaupt-combined burner (oil/ gas) Typ GL5/1-D, ZD, 200-945 kW, oil throughput 20-79 kg/h, 15-500 mbar, fittings for gas supply, switch cabinet, feed water pump, and the existing small and large-scale fittings. Economizer: Eco 3, 65 kw, 31 bar, 238°C, 28 ltr, 8,5 m².

Condition: new, sheet length: 1360sheet thickness: 6messurements (LxWxH): 2050 x 2250 x 1400motor: 7,5weight approx.: 2300Standard Accessories: NC control system Programmable motorized backgauge with 750 mm travel Shadow line illumination 1 pcs squaring arm with scale 2 pcs sheet support arms 1 pcs sheet support arm (for models 1106, 1306, 1505) Finger protection Ball transfer table Easy front access blade gap adjustment Predpfx Ajgickkonyjb Ballscrew mechanism Cut counter Portable foot control with emergency stop button Photocell safety sensor on rear guards

Condition: new, sheet length: 1560sheet thickness: 5messurements (LxWxH): 2250 x 2250 x 1400weight approx.: 2500motor: 7,5Standard Accessories: NC control system Programmable motorized backgauge with 750 mm travel Shadow line illumination 1 pcs squaring arm with scale 2 pcs sheet support arms 1 pcs sheet support arm (for models 1106, 1306, 1505) Finger protection Ball transfer table Easy front access blade gap adjustment Ballscrew mechanism Psdpfxogickns Anyerb Cut counter Portable foot control with emergency stop button Photocell safety sensor on rear guards

Condition: reconditioned (used), functionality: fully functional, operating pressure: 160 bar, empty load weight: 96 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 698 CSX HOT WATER PRESSURE WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A built-in hose reel allows for easy rewinding and storage. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 160 bar and 650 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Model: HDS 698 CSX Power supply voltage (V): 400 ~ 3 phase Performance discharge (l/h): 650 Operating pressure (bar): 30 - 160 Max. Water heating temperature (C): 80-155 Connection power [kW]: 4.5 Dimensions (L x W x H mm): 940 x 600 x 740 Pressure hose length (m): 20 Weight (kg): 96 EQUIPMENT: BUILT-IN HOSE REEL NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 20m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE Pedpfx Aozl Rqbjnyerb KEY FEATURES: Open oil system - no operating time limits Built-in chemical tank allows for dispensing cleaning fluid directly through the machine Highly legible and intuitive control panel Control The simple design and easy access to individual components under the housing make the machine user-friendly and easy to service. The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes.

Condition: used, axle configuration: 3 axles, first registration: 08/2007, color: other, Year of construction: 2007, Empty weight: 5.500 kg Axle 1: left 4 mm right 4 mm Axle 2: left 6 mm right 6 mm Prsdpfx Ansza T Uyoysb Axle 3: left 4 mm right 4 mm We have the possibility to stack trailers!

Condition: excellent (used), Tacchi HD/1450 – 725 x 4000mm CNC Lathe (2012) Serial Number: 7264 Year: 2012 Prsdsxc In Sspfx Anyjb Control: Fanuc OiTD CNC Condition: Used – good working order Technical Specifications: Centre height: 725mm Swing over bed: 1450mm Swing over cross slide: 1000mm Distance between centres: 4000mm Main drive motor: 60 kW Maximum weight between centres (unsupported): 15,000 kg Spindle speed range: 1.9 – 560 rpm Features & Equipment: 2 x 3-point steady rests Handwheel Swarf conveyor 4-position hydraulic toolpost 4-jaw chuck Fanuc OiTD CNC control

Condition: used, functionality: fully functional, Year of construction: 1991, operating hours: 9,529 h, load capacity: 4,000 kg, lifting height: 3,700 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,430 mm, fork carriage width: 1,220 mm, fork length: 1,120 mm, empty load weight: 4,335 kg, total length: 3,000 mm, drive type: Diesel, construction width: 1,380 mm, Diesel forklift Load center: 500 ISO class: FEM 3 A Mast type: Standard Transmission: Automatic Technical condition: normal Front tire type: Superelastic Front tire size: 2 x 250-15 Front tire condition: 0 - 20% Rear tire type: Superelastic Rear tire size: 2 x 7.00-12 Rear tire condition: 0 - 20% Battery year of manufacture: 1991 Pjdpfsz Hnxijx Anyorb Additional single hydraulic circuit, side shifter, Monotrol

Condition: reconditioned (used), functionality: fully functional, empty load weight: 96 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 698 CSX ECO HOT WATER PRESSURE WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A built-in hose reel allows for easy rewinding and storage. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 160 bar and 650 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Model: HDS 698 CSX Power supply voltage (V): 400 ~ 3 phase Performance discharge (l/h): 650 Operating pressure (bar): 30 - 160 Max. Water heating temperature (C): 80-155 Connection power [kW]: 4.5 Dimensions (L x W x H mm): 940 x 600 x 740 Pressure hose length (m): 20 Weight (kg): 96 EQUIPMENT: BUILT-IN HOSE REEL NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 20m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Podpfxjztzhyo Anyorb Open oil system - no operating time limits Built-in chemical tank allows for dispensing cleaning fluid directly through the machine Highly legible and intuitive control panel Control The simple design and easy access to individual components under the housing make the machine user-friendly and easy to service. The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes.

Condition: new, sheet length: 2060sheet thickness: 4messurements (LxWxH): 2700 x 2250 x 1400motor: 7,5weight approx.: 3000Standard Accessories: NC control system Programmable motorized backgauge with 750 mm travel Shadow line illumination 1 pcs squaring arm with scale 2 pcs sheet support arms 1 pcs sheet support arm (for models 1106, 1306, 1505) Finger protection Ball transfer table Easy front access blade gap adjustment Ballscrew mechanism Cut counter Portable foot control with emergency stop button Podpfx Anogickreyorb Photocell safety sensor on rear guards

Condition: new, sheet length: 2560sheet thickness: 4messurements (LxWxH): 3200 x 2250 x 1400motor: 7,5weight approx.: 3500Standard Accessories: NC control system Programmable motorized backgauge with 750 mm travel Prjdpjgickvofx Anyob Shadow line illumination 1 pcs squaring arm with scale 2 pcs sheet support arms 1 pcs sheet support arm (for models 1106, 1306, 1505) Finger protection Ball transfer table Easy front access blade gap adjustment Ballscrew mechanism Cut counter Portable foot control with emergency stop button Photocell safety sensor on rear guards

Condition: used, Year of construction: 2011, pressure: 400bending length: 4050column width: 3400electricity performance: 37,5weight approx.: 25.000messurements (LxWxH): 5750 x 2110 x 3440STOCK CLEARANCE – UNBELIEVABLE PRICE!CNC Press Brake – DURMA AD-S 40400 (4 m x 400 tons) (Original price approx. EUR 170,000) Technical Specifications:Manufacturer: DURMA Model: AD-S 40400 Year of manufacture: 2011 Bending length: 4,050 mm Pressing force: 400 tons Axes: Y1, Y2, X, R + CNC-controlled crowning Motor power: 37 kW Features & Equipment:CNC crowning system, motorized adjustment via control Upper tool: 1010/A/75°, segmented and gooseneck-style Die: Multi-V die Backgauge: CNC-controlled 2 front sheet supports on linear guides Psdpjvfy Sxsfx Anyjrb CE-certified laser safety system (Lasersafe) mounted on the upper beam Machine fully complies with CE standards new pump installed The machine is being sold in its current condition. The machine was purchased from an insolvency sale and transported to our warehouse. The basic up and down functions have been tested and are working. Apart from that, we have no further information regarding the technical condition or overall functionality of the machine. An on-site inspection can be arranged upon request. The machine is sold as is, without any warranty or guarantee. One-time offer – available immediately!Only 1 unit in stock – ready for fast delivery – no lead time!Take advantage of this rare opportunity to own a high-performance CNC press brake at a fraction of the original price.