Used Hönnema Kat 63/1250 for sale (5,786)

Condition: used, mileage: 570,000 km, power: 375 kW (509.86 HP), first registration: 06/2021, fuel type: diesel, number of seats: 63, gearing type: automatic, next inspection (TÜV): 08/2026, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, onboard kitchen, parking heater, soot filter, According to our “General and Stated Terms and Conditions,” and without any warranty or guarantee, we can offer you the following vehicle as a non-binding offer, subject to prior sale, error, and typographical mistakes, until conclusion of the contract: Neoplan Cityliner L, 3 stars, 63+2+1 (Vehicle 727) First registration: 03/06/2021 570,000 km Engine: 12,419 cc 375 kW / 510 HP Euro 6, D, M, N MAN Truck & Bus TÜV valid until 08/2026, SP until 02/2026 Gross vehicle weight: 23,920 / 25,530 kg Unladen weight: 16,145 kg Payload: 7,775 kg Overall length: 13,900 mm Lajdpfxsy Dmqkj Am Nja Overall width: 2,550 mm Overall height: 3,745 mm Tow coupling 63+2+1 configuration Auxiliary headlights Upper windshield wipers Tow coupling Lane departure warning system with adaptive cruise control and emergency brake assist Sleeping cabin converted into luggage compartment DAB radio with large screen and navigation ZF Intarder Multifunction steering wheel Automatic climate control, auxiliary heater Microphone Emergency exit Driver’s seat heating Toilet Rear kitchen Front refrigerator integrated in dashboard Partial leather + fabric + leather headrests with armrests and belts Wooden floor 220V inverter 2 screens (1 front, 1 rear) Camera system: interior, doors, rear, and reversing camera ALCOA LM rims 3rd axle steerable and liftable (relief axle) Tyres: 295/80R22.5: 1st about 70/40%, 2nd about 60/40%, 3rd about 60/40% Spare wheel Rear bumper on passenger side with minor damage (bumper will be replaced) New replacement transmission in 12/2025 for €28,000.00 Price: €250,000.00 (net) All information provided without any warranty or guarantee. Our “General and Stated Terms and Conditions” apply. Jurisdiction for both parties up to a disputed amount of €50,000.00 is the District Court Ludwigslust; for higher amounts, the Regional Court Schwerin. Subject to error, typographical mistakes, and prior sale.

Condition: used, Year of construction: 2008, turning diameter 1000 mm swing diameter 1250 mm turning height 500 mm control Siemens Sinumerik 840 D Workpiece spindle flange diameter 520 mm work piece spindle speed range 0-440 U/min total power requirement 75 kW weight of the machine ca. 25 t dimensions of the machine ca. 5100 x 3034 x 4500 mm With grinding spindle Table travel: - Z1/Z2 axis 1000 mm, - X1/X2 axis approx. 1300 mm Table speed continuously adjustable: - Z axis 0–30 m/min, - X axis 0–50 m/min Lsdpfx Amjw Rgcfj Noaa - Feed speed continuously adjustable 0.01–15 mm/min - Feed dependent on stroke 0.0005–0.1 mm - Workpiece spindle positioning C axis Equipment/accessories: - Grinding spindle - Kaiser dresser - Tool measuring probe - Filter system - With flushing nozzle connections - 2 Capto holders - 1 set of jaws for chuck - technical documentation

Condition: used, maximum load weight: 22,700 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 04/2015, next inspection (TÜV): 11/2023, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, * Hydraulic unit (24V) * Hydraulic loading ramp * Lifting roof * Drinking system * Fan ----* Side shift * Feed flaps * Partition grille * Storage boxes ----* Trailing axle steered & liftable * BPW Eco Plus axles * Wabco Trailer EBS, ABS & ALB ----* Tire dimensions: 385/65R22.5 Laedpskpmu Eefx Am Nsa * Total length: 14000 mm * Own weight: 12300 kg * SP due: 05.2023 -----Subject to errors and prior sale Vehicle number 4225

Condition: used, Guideway and surface grinding machine WMW FRITZ HECKERT Aschersleben type SZ 1000 x 1250 x 3000 / 344 make no. 13.2236.2 year of construction 1989 nominal grinding area 3000 x 1250 mm table clamping area 3240 x 1000 mm grinding length max. 3300 mm Machining width 1250 mm Machining height 1250 mm Lsdpfehv A A Dex Am Njaa grinding wheel diameter (surface grinding support) max. 600 mm grinding wheel width (flat grinding support) max. 100 mm grinding wheel diameter (swivel support) max. 450 mm Mains connection 400 Volt, 50 Hz - grinding support swiveling, drive power 16,5 kW, infinitely variable speed - grinding support for surface grinding, drive power 15 kW, infinitely variable speed - new electrical control, based on SIEMENS S7 from year 2001 - new electric control cabinet beside, year of construction 2001 - infinitely variable grinding wheel speed at both grinding supports - swiveling wheelhead for guideway and profile grinding - swivel-mounted and height-adjustable control panel - coolant system adjacent - Hydraulic system adjacent - oil circulation lubrication adjacent - Various grinding wheels and holders space requirement complete L x W x H 11900 x 7700 x 4600 mm weight 45 ton. very good condition

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, clamping force: 2,451 kN, screw diameter: 60 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laedpfoy Ewvtjx Am Nea Clamping force: 250 t Screw diameter: 60 mm Tie bar spacing: 630 x 560 mm Note: When purchasing multiple items from the same location (see offers below), you will be granted the lower costs for dismantling and loading accordingly.

Condition: new, Cesurbend 3-roll round bending machine MRS 1250 x 140 Technical specifications: Special equipment included in the price: hardened rolls motorized back roll adjustment digital display sheet width 1250 mm sheet thickness 5,5 mm max. sheet thickness 5,0 mm bending roll length 1250 mm roll diameter 140 mm Lsdpfx Aeh Timpjm Njaa weight 1150 kg dimension L-W-H 2020 x 900 x 1200 mm motor: 2.2 KW Equipment: upper and lower roller electr. driven upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor sep. control and operation panel safety line CE mark

Condition: excellent (used), CATALOG NUMBER 7051 Lajdox S Icwspfx Am Nsa TECHNICAL SPECIFICATIONS - Wheel diameter: 630 mm - Table dimensions: 890x710 mm - Table adjustable in angle - Motor: 3 kW - Max cutting height: 240 mm - Throat (band to frame): 570 mm - Extraction port diameter: 100 mm - Dimensions (L/W/H): 1250x800x2300 mm - Weight: 681 kg ADVANTAGES – Manufactured in Poland – Very good condition – Used saw Net price: 7,900 PLN Net price: 1,880 EUR depending on the rate 4.2 EUR (Prices subject to change in case of significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7914 TECHNICAL DATA - shaft width: 640mm - number of knives: 4 pcs - max thickness of processed element: 250mm – top side: - anti-kickback fingers/rejectors - toothed feed roller, driven - pressure unit - planing shaft - pressure unit - smooth outfeed roller, driven – underside: - adjustable rollers in the lower table: 2 pcs - main motor: 7.5kW - electric table lift - lifting motor: 1.1kW - 2 feed speeds - feed motor: 1.3kW - dimensions (L/W/H): 1130x1300x1200mm - weight: 1026kg Laedpfx Asyrr A Hsm Nea ADVANTAGES – made by Polish brand JAROMA – electric table height adjustment – DTR documentation provided – used thickness planer, in very good condition Net price: 16900 PLN Net price: 4030 EUR (at an exchange rate of 4.2 EUR) (Prices may change with larger rate fluctuations)

Condition: used, mileage: 266,000 km, power: 243 kW (330.39 HP), first registration: 12/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, tail-lift, * Iveco Stalis AD190 330 refrigerated box truck * 3 units in stock Ledpsyum Iiefx Am Nsaa * TÜV NEW 04-2027 * First registration: 12-2016 * Automatic transmission * Carrier Supra 1250 MT * 3 compartments / 3 cooling evaporators * Palfinger tail lift 2,000 kg * Air conditioning * Engine brake * Internal length: 8.03 m * Internal height: 2.4 m * Internal width: 2.48 m * Unladen weight: 10,910 kg * Payload: 7,090 kg * Gross weight: 18,000 kg * More images and videos via Whatsapp * Information subject to change and prior sale reserved.

Condition: excellent (used), Year of construction: 2017, CNC Turning and Milling Center DMG Mori CTX gamma 1250 CT (Year 2017) Available from March 2027 Base Machine - CTX gamma 1250 CT with turning length 1,250 mm - Main spindle as integrated spindle motor (ISM102) - Drive power: 35/45 kW (100/40% duty cycle) - Speed: 4,000 rpm - Partial hollow clamping device (hydraulic) - Draw tube inner diameter: 104 mm, depth: 848 mm - C-axis and hydraulic spindle brake - Chuck flushing device on main spindle (external) - Upper cross slide with turning/milling spindle as motor spindle: - Speed: max. 12,000 rpm - Power: 27 / 36 kW (100% / 40% duty cycle, 2 min) - Torque: 160 / 220 Nm (100% / 40% duty cycle, 2 min) - Hydraulic clamping during turning - Tool interface: HSK-A 63 DIN 69893 - Y-axis: ±210 mm - B-axis: ±120°, torque motor - Tool disc magazine: 36 positions - NC tailstock with supported, hydraulically movable quill and fixed center - Absolute, direct linear measurement systems in X-, Y-, and Z1-axis - Coolant pump: 6 bar, 20 l/min, fabric filter, filter fineness 100 µm - Cooling system for spindle motors, motor unit, turning/milling spindle, and B-axis torque motor - Control: CELOS® with Siemens 840D sl Operate and ShopTurn 3G Control & Operation - CELOS® with Siemens 840D solutionline Operate including 21.5" ERGOline® Control with multi-touch display - APPs for simplified machine operation - Comprehensive management, documentation, and visualization of order, process, and machine data - Networking with CAD/CAM and compatibility with PPS/ERP Enhanced Equipment - Tool chain magazine: 120 positions (instead of 36-position disc magazine) - Tool interface: HSK-A 63 DIN 69893 Lasdpsy A Hq Isfx Am Nea - Mechanical oil mist separator - Capacity: 1,100 m³/h, filter class H13 - 4-color signal lamp - "BLACK" design variant - Work area door, front panel, and front window frame in deep black - Tropical package for ambient temperatures up to 40 °C - Includes control cabinet cooling unit - Energy measuring device - 3D data model of machining area (STEP & IGES) – supplied on CD - Electrical Profibus interface for 6-axis robot - (Only with Siemens control) Special Equipment / Options - Grinding preparation (using CBN cup tools), consisting of: - Shortened grease lubrication cycle - Plug sealing in draw tube - Flushing of Z1/X1 telescopes during machining - HT 2 control hand unit - Jog mode, creep mode, and incremental adjustment via handwheel - Integrated emergency stop function and feed override - Tailstock with increased feed force (20 kN) Hydraulically actuated double-piston chuck Forkardt OZRDI 150, consisting of: - Integrated pressure converter - Piston rod clamping - Stroke monitoring unit with switching cone for clamping piston Ø150 mm - Maintenance-free 5-channel oil supply - Safety valve system for clamping piston Ø150 mm Condition The machine has been regularly serviced by DMG Mori customer service and is in technically flawless condition. An inspection under power or during ongoing production is possible. Dimensions & Weight - Machine: approx. 580 × 280 × 285 cm, approx. 20,000 kg - Chip conveyor: approx. 670 × 125 × 160 cm, approx. 1,000 kg - Total weight including accessories: approx. 22,605 kg - Number of packages: 11 - Loading meters: approx. 21 The complete equipment and further technical data are available in the documentation, which we are happy to provide upon request. Disassembly, removal, shipping, and recommissioning can be organized.

Condition: excellent (used), Year of construction: 2016, operating hours: 75,078 h, functionality: fully functional, CNC Turning and Milling Center Gildemeister CTX gamma 1250 CT – Technically Excellent Condition (Year of manufacture: 2016) Operating hours: 75,078 Spindle hours: 48,772 Available from: Week 47 / 2026 (Inspection under power during ongoing production possible) Basic Equipment Turning length: 1,250 mm Main spindle as integrated spindle motor (ISM102) Drive power: 35/45 kW (100/40 % DC) Spindle speed: up to 4,000 rpm Partial hollow chucking device (hydraulic) Draw tube inner diameter: 104 mm, 848 mm depth C-axis with hydraulic spindle brake Upper cross slide with turning/milling spindle as motor spindle Mounting: HSK-63A DIN 69893 Hydraulic clamping during turning Y-axis: ±200 mm B-axis: ±120° (torque motor) Tool disc magazine: 36-position NC tailstock with mounted, hydraulically traversable quill and fixed live center Absolute, direct measuring systems on X, Y, and Z1 axes Coolant pump: 6 bar, 20 l/min, filtration fineness 10 µm Cooling system for spindle motors, motor console, turning/milling spindle, and B-axis USB and Ethernet interfaces Control CNC controller: Siemens Sinumerik 840D solutionline Operation: ERGOline Control Software: SINUMERIK Operate, ShopTurn 3G Operating system: Linux Extended Equipment Tool chain magazine: 120-position (instead of 36-position) Mechanical oil mist separator, filter class H13 Chuck flushing device on main spindle Coolant supply through spindle Tropical package (up to 40°C ambient temperature) Workpiece measuring probe BLUM TC60 incl. cycle package 3D data model of work area (STEP / IGES) Profibus interface Hand-held control device with jog mode and emergency stop function Tailstock force increased to 20 kN Special tailstock version for torque-proof pressure device Coolant & Chip System Coolant cleaning unit: Filter unit FK 20 (20 l/min) Coolant tank 950 l Magnetic roller MW180 Process pumps: 5 bar / 20 bar Chip conveyor type 300 S-2 (wear-resistant design, XAR) Return delivery pump: 1.2 bar Condition The machine has been regularly serviced by Gildemeister service and is in technically excellent condition. Dimensions & Weight Machine: approx. 580 × 280 × 285 cm, approx. 20,000 kg Chip conveyor: approx. 670 × 125 × 160 cm, approx. 1,000 kg Total weight incl. accessories: approx. 22,605 kg Number of packages: 11 Loading meters: approx. 21 Disassembly, loading, transport, and recommissioning can be organized Machinery Trade Nord Gerstenstraße 2 Ljdpfx Amjy A Hngo Njaa 17034 Neubrandenburg

Condition: used, Evaporator GEA KUBA -Type: SGB 63-F62 -Cooling capacity: 33.3 kW at DT8, 26.6 kW at DT7 -Fin spinning: 7 mm -We have 10 pcs with electric heaters and 7 pcs without heaters -Fans: 2 x 630 mm -Dimensions: 3020 x 850 x 1000 mm -Refrigerant: Freon -Volume: 45 L -Quantity in stock: 17 -Stock number: CH 599 -Condition: Used in very good condition, evaporator 100% tight, fans working, ready to work Lsdpfxjy Endze Am Njaa

Condition: refurbished (used), Moog double pump for Engel injection moulding machine Lsdpfx Ajy Ah Ihem Njaa

Condition: excellent (used), CNC Turning-Milling Center Gildemeister CTX gamma 1250 CT, Year 2016 Pictures to follow... Available from March 2027 Base machine: CTX gamma 1250 CT with a turning length of 1250 mm - main spindle as integrated spindle motor, ISM102, drive power 35/45KW (100/40% duty cycle), 4000 rpm - partial hollow clamping device (hydraulic), draw tube inner diameter 104 mm x 848 mm depth - C-axis and spindle brake (hydraulic) - upper cross-slide with turning/milling spindle as motor spindle with hydraulic clamping during turning, HSK-63A DNI 69893 interface - Y-axis ±200 mm - B-axis ±120°, torque motor - disc-type tool magazine with 36 stations - NC tailstock with bearing-mounted, hydraulically movable quill, fixed center - absolute, direct linear measurement systems in X, Y, Z1 axes - coolant pump 6 bar; 20 l/min, plug-in screen filter 10 µm filtration - cooling system for spindle motors, motor console, turning-milling spindle, B-axis torque motor - CNC control with ERGOline operating panel (manufacturer and type per control description) - USB interface, Ethernet interface CNC Control: SIEMENS Sinumerik 840D solutionline with ERGOline Control, SINUMERIK Operate and ShopTurn 3G, Linux OS at no extra cost Tool chain magazine for 120 tools replaces disc-type magazine (36 tools), HSK-A 63 DNI 69893 interface, - only with Siemens control - Mechanical oil mist separator 100 m³/h, filter class H13 Chuck flush device at the main spindle, external, Coolant supply through turning spindle Tropical package for machine environment temperatures up to 40°C, consisting of control cabinet cooling unit (up to 40°C) B-H7080 workpiece touch probe, BLUM, with Quickstart cycle package including probe TC60 with transmitter and receiver unit, HSK 63A tool interface, 1 stylus, measuring cycles B-Z0908 3D data model of the specified machine workspace in Step and IGES format. Delivery of the 3D data model on CD. B-L7000 Standard electrical interface Profibus Handheld control unit: Axes X1Y, 1, Z1, C1, B1, X2, Z2, Z3, C3, C4 can be jogged and moved incrementally using the handwheel. Emergency stop and feed override functions are available on the handset. Tailstock feed force increased to 20kN. SK-2014-3518 The tailstock is supplied without quill bearing to allow fitting of a twist-proof pressure device. When used as a tailstock, a rotating center must be used. Coolant cleaning system: - Filter unit type: FK 20 * Filter performance 20 l/min * Filter medium: filter fleece PN100/100 - Coolant tank 950l type: FKA/950 - Magnetic roller type: MW180 - Process pump 5 bar (50 l/min) - Process pump 20 bar (40 l/min) with DBV 20/40 - Control cabinet Chip conveyor type 300 S-2: - Wear-resistant version (guides and base plates made from XAR) - Return pump 1.2 bar (100 l/min) etc. The full equipment and further technical data can be found in the documentation, which we are happy to provide on request. The machine has always been serviced by Gildemeister customer service and is in technically perfect condition. It can be inspected under power and during production. Dimensions & weight: (LxWxH) Machine CTX Gamma DL 125 – 580x280x285 cm, 20,000 Kg Chip conveyor 670x125x160 cm, 1,000 Kg Total weight incl. accessories 22,605 Kg Number of packages 11 Loading meters: 21 Dismantling, removal, shipping, and reinstallation can be organized. Ljdpfx Amjy Axuxj Njaa

Condition: ready for operation (used), An industrial large-format welding rectifier ESAB is available. Rated current: 1250A, welding voltage: 44V, power factor: 0.92, weight: approx. 490kg. An on-site inspection is possible. Lasdpfx Amsy Ayaco Nea

Condition: new, sheet width 1250 mm plate thickness 1,5 mm distance between columns 1300 mm daylight opening 80 mm 155 ° total power requirement Handbetrieben weight of the machine ca. 0,18 t dimensions of the machine ca. 1,4 x 0,8 x 1,3 m Segment-bending machine Segment widths: Laedpfx Amoy Aa Iae Nja 2x50mm,1x70mm,2x75mm, 2x100mm,4x150mm, 1x170m.

Condition: excellent (used), Year of construction: 2002, operating hours: 140 h, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 2,000 mm, overall weight: 12,000 kg, Equipment: safety light barrier, CNC Punching Machine Boschert TWIN / ROTA – 2023 MANUFACTURER COMPLETE OVERHAUL – EXCELLENT CONDITION For sale is a CNC punching machine Boschert TWIN / ROTA, year 2002, which underwent a comprehensive manufacturer overhaul in 2023. The machine is in exceptional technical condition and is immediately ready for production – ideal for subcontracting or companies with short-term capacity requirements. --- 🔧 Scope of Overhaul (2023): - Complete refurbishment of all axes - New motors Ljdpfx Aoy A Sx Djm Neaa - New wiring - New pneumatic components - Professionally serviced hydraulic system - Control system renewed - New brush tables --- ⚙️ Equipment: - Working area: 1250 x 2000 mm - 1x punching head, 360° rotatable - 1x punching head (fixed) - 8-station Revotool, including tools - Ready for immediate use – no investment required - Only approx. 140 operating hours since overhaul --- 💡 Special Features: The machine was not just serviced but has been thoroughly modernized. All key components have been renewed or overhauled – resulting in a significantly lower failure risk compared to typical used machines. --- 🎯 Ideal for: - Subcontract manufacturing - Small and medium batch production - Companies with urgent production requirements --- 📍 Inspection and test run possible by arrangement. A video of the machine in operation can be provided upon request. If you have any questions or need more information, please feel free to send us a message or give us a call. Sale is carried out under exclusion of any warranty claims. The machine is sold in its current condition (as inspected and tested). Inspection and test run are expressly encouraged.

Condition: good (used), 1 x chip vibrating screen Schwanog Rapid SBM 63 GDS Year of manufacture: 1977 with blower In good technical and visual condition. Accessories: 3 x screens of your choice Dimensions: L: 970 x W: 390 x H: 110 mm Ledoy Atkzjpfx Am Njaa The machine can be inspected under power at any time.

Condition: used, Year of construction: 2021, total length: 3,300 mm, total width: 1,200 mm, total height: 2,150 mm, Weight: 500 kg Price: On request - Year: 2021 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 5026BW Lsdpfsyzm Hmsx Am Njaa - Max. cutting height horizontal [mm]: 1250 - Max. cutting width [mm]: 2500 - Max. cutting depth [mm]: 55 - Min. saw blade diameter [mm]: 250 - Max. saw blade diameter [mm]: 250 - Arbor saw blade diameter [mm]: 30 - Horizontal cutting: Yes - Vertical cutting: Yes - Voltage [V]: 400 - Current consumption [A]: 6.6 - Fuse [A]: 16 - Power [kW]: 3.0 - Transport dimensions: 3300mm x 1200mm x 2150mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,200 mm, total width: 3,600 mm, spindle speed (max.): 3,000 rpm, total height: 7,200 mm, table load: 10,000 kg, overall weight: 21,000 kg, spindle motor power: 22,000 W, controller manufacturer: HEIDENHAIN, controller model: TNC, product length (max.): 5,200 mm, number of axes: 3, This 3-axis Rambaudi RX 1250 gantry milling machine was manufactured in 1997. It features a substantial table dimension of 2500 x 1250 mm and impressive axes strokes of 2000 x 1250 x 1200 mm. With a rotation speed of 3000 rpm and a power of 22 kW, this machine is designed for high-performance milling applications. If you are looking to get high-quality milling capabilities, consider the Rambaudi RX 1250 machine we have for sale. Contact us for further details. Laedpfoy Aaw Ujx Am Noa • Table dimensions (X/Y): 2500 × 1250 mm

Year of construction: 2013, condition: ready for operation (used), number of axes: 3, This 3-axis BOSCHERT Compact 1250 Rota was manufactured in 2013. It features a working area of 1270 × 2000 mm and handles sheet thickness up to 6 mm. Equipped with a rotational tool changer, it offers versatile punching options and a user-friendly CNC control. Its compact design saves space while ensuring robust and durable construction. Ideal for batch and small to medium production runs. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Working area: approximately 1270 × 2000 mm • Maximum sheet thickness: up to 6 mm (standard setup) • Rotational tool changer for versatile punching • High precision and repeatability • User-friendly cnc control • Compact and space-saving design • Fast tool change for efficiency • Robust and durable construction Laodpeyaihvofx Am Nsa • Automated sheet clamping for consistent results • Suitable for batch and small to medium production runs

Condition: used, Style lathe Max turning diameter: 510 mm Ledpfxsyzcz Ho Am Neaa Distance between centers: 1250 mm Spindle bore: 80 mm Automatic tool changer with 8 positions Year of manufacture: 2002

Condition: good (used), functionality: fully functional, pressing force: 65 t, stroke length: 200 mm, table width: 600 mm, table length: 1,250 mm, throat depth: 500 mm, ram plate width: 600 mm, ram plate length: 1,250 mm, distance table to ram: 650 mm, total length: 2,300 mm, total width: 1,400 mm, total height: 3,000 mm, overall weight: 7 kg, Capacity: 65 tonnes Adjustable stroke: 200 mm Upper and lower table dimensions: 1250 x 600 mm Longitudinal groove in addition to transverse grooves, allowing for the installation of a bending tool. Indicative bending capacity at maximum power: 10 mm over 1000 mm (tool not supplied) Table/ram opening (open): 650 mm Ledpfx Amjyz Sgxo Noaa Table/ram opening (closed): 445 mm Throat depth: 500 mm Machine dimensions: 2300 x 1400 x 3000 mm Weight: 7 t

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, punching force: 30 t, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, overall weight: 6,950 kg, EUROMAC PUNCHING MACHINE MOD. 1250/30 – 2000 AUTOINDEX YEAR 2009 – CE – FULLY REFURBISHED, AS NEW. Maximum punching force: 300 kN Y-axis travel with multitool: 1300 mm Y-axis travel with single punch: 1250 mm X-axis travel: 1250 x 2000 mm Automatic repositioning: Up to 10,000 mm Punch stroke adjustment: from 0.1 to 31 mm Autoindex multitool stations: 5 Ledpfxey Dgrns Am Nsaa Rotational speed: Programmable Y + X 1250 speed: 50 m/min Y + X 2000 speed: 60 m/min Positioning accuracy: +/- 0.1 mm Clamp opening: 11 mm Maximum strokes: 300 (1/min) Maximum sheet thickness: 10 mm Maximum punching diameter: 81 mm Installed power during operation: 7.5 kW Year: 2009 CE marked machine Overall dimensions: 2000 x 4000 x h 3350 mm Weight: 6950 kg

Year of construction: 2012, condition: excellent (used), Agro pellet production line ! Year - 2012 Capacity - 10t/h - Line Ai B for transporting bales, command bridge and lane - 2 pieces - Rotary crusher - 1 pieces - Rotogrind - 1 pieces - Pneumatic transport with fan - 2 pieces - Cyclone - 2 pieces - Bunker for mixing materials - 2 pieces - A line- 2 spirals for passing material - 1 pieces - line- 2 turnstiles for passing material - 1 pieces - Line A dryer with four cyclones - 1 pieces - Line B dryer with four cyclones - 1 pieces - Straight belt for transporting raw materials - 4 pieces Ledpolqw Dcefx Am Noaa - Slanted belt for transporting raw materials - 4 pieces - Wood chipper for shredding material - 4 pieces - Pneumatic transport with fan - 4 pieces - Material cyclone - 4 pieces - Small dosing cyclone - 4 pieces - Bunker for mixing raw materials - 2 pieces - Press dosing spiral (screw conveyor) - 5 pieces - Kahl press with electric. with a motor - 250 kw - 1 pieces - Kahl press with electric. with a motor - 250 kW - 1 pieces - Kahl press with electric. with a motor - 250 kW - 1 pieces - Small conveyor belt for pellets - 1 pieces -Small inclined conveyor belt for pellets - 1 pieces - Vibro screen - 1 pieces - Pellet cooler - 1 pieces - Elevator for returning material with two spirals Dust filter - 1 pieces - Bran filler - 2 pieces - Large inclined belt for transporting - 1 pieces pellets Silos for sacking pellets with scale - 1 pieces - Electricity Cabinets - 20 pieces - Filter for extracting steam from the press - 1 pieces