Used Haco Ppm 30-150 for sale (33,131)

Condition: as good as new (ex-display), Year of construction: 2025, High-pressure cleaner, high-pressure flushing unit, high-pressure built-in unit on hot-dip galvanized and painted high-quality steel frame with forklift tines, suitable for installation in service vehicles. PTC Moses 60/200, 75/150, 30/300, 75/210XL, 84/190XL, 102/150XL and 50/300XL – similar to, but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Moses 60/200 | 60 l/min. at 200 bar | Engine: Yanmar 3TNV88C 27.5 kW Stage V Moses 75/150 | 75 l/min. at 150 bar | Engine: Yanmar 3TNV88C 27.5 kW Stage V Moses 30/300 | 30 l/min. at 300 bar | Engine: Yanmar 3TNV88C 27.5 kW Stage V Moses XL 75/210 | 75 l/min. at 210 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V Moses XL 84/190 | 80 l/min. at 190 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V Moses XL 102/150 | 102 l/min. at 150 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V Moses XL 50/300 | 50 l/min. at 300 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V DIMENSIONS / WEIGHT: Dimensions of models with 27.5 kW without water tank LxWxH: approx. 910x1,220x1,200 mm Dimensions of models with 35.5 kW without water tank LxWxH: approx. 1,240x1,310x1,300 mm Empty weight without water tank: approx. 550-700 kg HIGH-PRESSURE PUMP: - Manufacturer: HPP - Model: CLW for standard models and ELS for XL models - Flow rate: max. 102 l/min. - Operating pressure: max. 300 bar ENGINE: - Manufacturer: Yanmar - Model: 3TNV88C and 4TNV88C - Fuel: Diesel - Cooling: Water - Cylinders: 3 and 4 - Max. power: 37-48 hp (27.5-35.5 kW) - Max. engine speed: 3,600 rpm TRANSMISSION: Pulley and belt CONTROL PANEL: - Start button - Hour meter - Electronic fuel gauge - LED indicator for oil temperature - LED indicator for low lubricating oil pressure - LED indicator for clogged air filter - LED indicator for speed measurement - LED indicator for generator - LED indicator for spark plugs - Emergency stop button ELECTRICAL CONTROL: - Winding/unwinding of hydraulic hose reel; Hedpfx Aksf Ar Exeronu - On/off bypass; - Speed control +/-; - Emergency stop button; - Switching to remote control; INSTALLED ALARM: - Low water level protection against dry running of the high-pressure pump with automatic shut-off function. SAFETY AND PRESSURE REGULATING VALVES: - The unit is equipped with a safety valve, a pressure regulating valve and a pressure gauge. HIGH-PRESSURE HOSE REEL: - Type: hydraulically operated hose reel, swiveling by 180° - Material: Stainless steel - Capacity: max. 100 m ½“ - Hose: 80 m ½“ high-pressure hose (included) - Hose guidance: manual WATER SUPPLY HOSE REEL: - Type: manual - Material: Stainless steel - Capacity: max. 35 m ¾“ low-pressure hose - Hose: 35 m ¾“ low-pressure hose (included) FUEL/OIL TANK: - Fuel: approx. 13 l - Oil: approx. 13 l INCLUDED IN DELIVERY: - Multifunction remote control IMET; - On / Off engine; - On / Off bypass; - Speed control +/-; - Winding / unwinding of hydraulic hose reel; - Emergency stop button; - Battery charger for remote control; - 500, 800 or 1000 l water tank;

Condition: like new (used), functionality: fully functional, mileage: 65,668 km, fuel type: diesel, overall weight: 3,500 kg, axle configuration: 2 axles, fuel: diesel, energy efficiency: B, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 3, total length: 5,986 mm, total width: 2,040 mm, loading space length: 5,986 mm, loading space width: 2,040 mm, Equipment: ABS, airbag, VOLKSWAGEN CRAFTER 30 2.0TDI 140 HP PMTA – Year 10/2023 – 65,668 km – EURO 6D – 1968 cc – 103 kW – 140 HP – Internal length 3,300 mm – Width 1,780 mm – Internal height 1,950 mm – Payload 884 kg – ABS – Air conditioning – Electric windows – CD radio – Overhead shelf – Navigation system – For info contact Francesco 3356514297 Hnjdpfx Akjycudhorou

Condition: used, Year of construction: 2010, 4 positions Automatic full-width device 2 axes digitized 230/120mm Hsdsz Syp Sopfx Akrjnu 24.5KW 380V

Condition: good (used), Year of construction: 2006, functionality: fully functional, Technical details turning diameter 660/275 mm turning length 1498 mm control Fanuc/Mori Seiki MSX 701 total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm Additional information 9-axis CNC turning and milling centre * Fanuc MSX-701 CNC control * Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. * 40-position tool magazine * 10-position turret at bottom, all positions driven * 2 x 3-jaw quick-change chuck KNCS-N 315/91 * KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system * Chip conveyor * Drain system for main spindle chuck (controlled via M function) * Drain system for tool cutting edge (controlled via M function) * Coolant gun incl. accessories * Oil mist extraction * Direct measuring system X1, X2, Y-axis * Bar loader interface * Double foot switch for both spindles * Islands and pocket programming for MAPPS * High-speed fixed cycle for MAPPS * Programm memory extension to 8 MB * Programm restart * 3-stage signal lamp * 512 MB memory card (CF card) Swing diameter over cross slide (tool spindle 1): 750 mm Swing diameter over cross slide (turret 2): 400 mm Max. turning diameter (tool spindle 1): 660 mm Max. turning diameter (turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Travels: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120 deg., full B-axis 1 deg. indexed and 0.0001 deg. braked X2 axis (turret): 195 mm Z2 axis (turret): 1525 mm SZ axis (subspindle): 1610 mm Rapid traverse: (X1,Z1) 50 m/min. / (Y,X2,Z2,SZ) 30 m/min. Hjdpezr Hgxjfx Akronu Main and subspindle: Spindle speeds infinitely variable (spindle 1 + 2): 30-3000 rpm. C axis (spindle 1 + 2): 0.001 deg. Main spindle motor: 22/18.5 kW Subspindle motor: 22/18.5 kW Torque (spindle 1 + 2): 1000 Nm Disc turret: Number of tool positions: 10 Speed of driven tools: 6000 rpm. Drive power: 5.5/3.7 kW Milling spindle head: Tool holder: HSK A63 Max. speed: 12,000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Tool changer: 40-stations Tool diameter 70/140 mm Tool length 400 mm Tool weight 8/10 kg Total power requirement 90 kVA Main dimensions Length x width x height 5301 x 2997 x 2788 mm Machine weight 26.6 t Accessories: Measuring arm (picture) tool measurement in machine Tool holder + box, reduction sleeves, driven tools Clamping jaws package Collets package

Year of construction: 2018, condition: ready for operation (used), cutting length (max.): 3,050 mm, sheet thickness (max.): 6 mm, Hydraulic shearing machine manufactured in 2018. This HACO TSX3006 MOT features a maximum cutting length of 3050 mm and a cutting thickness capacity of 6 mm for mild steel. It includes automatic blade gap and rake angle adjustments, along with a backgauge adjustment range of 1000 mm. If you are looking to get high-quality shearing capabilities, consider the HACO TSX3006 MOT machine we have for sale. Contact us for further details. Hedpfxjy Ti A Ie Akrsnu - Control System: SC 100 T Touchscreen control- Voltage: 380V / 50 Hz- Capacity: 3000 / 6- Backgauge Adjustment Range: 1000 mm- Sheet Support Arms: 1x 1000 mm length- Blade Gap Adjustment: Automatic- Rake Angle Adjustment: Automatic- Cutting Line Illumination: Included- Safety Equipment: Type II Finger Guard with Moulden, CE Certified- Machine Paint Finish: Light Gray and Dark Gray (No Cyan Blue)- Current Status: Delivered WITHOUT OIL FILLING

Condition: good (used), Year of construction: 2014, Knuth Sinus 330 x 1500 Knuth Sinus 330 x 1500 lathe, manufactured in 2014, in very good original condition. The machine comes from a special production run by a renowned German machine tool company. CE compliant!! Technical data: Year of manufacture: 2014 Knuth Sinus 330 x 1500 Working area: Workpiece length: 1,500 mm Turning diameter over bed: 660 mm Turning diameter over cross slide: 440 mm Turning diameter without bridge: 900 mm Bridge length: 320 mm Bed width: 400 mm Travel distances: Travel X-axis: 368 mm Travel Z1-axis: 230 mm Swivel range of top slide: 45° Main spindle: Spindle speed: 25 rpm - 1,600 rpm Spindle bore: 105 mm Spindle mounting: D1-8 Spindle taper: ø 113 mm / 1:20 Rapid traverse: Rapid traverse X-axis: 2,000 mm/min Rapid traverse Z-axis: 4,000 mm/min Tailstock: Tailstock spindle diameter: 90 mm Tailstock taper: 5 MK Hjdsz Irwfepfx Akrsnu Tailstock quill stroke: 235 mm Tailstock cross slide: ± 12.5 mm Drive power: Motor power, main drive: 7.5 kW Dimensions and weights: Dimensions (L x W x H): 3.21 m x 1.23 m x 1.6 m Weight: 2,800 kg About the machine: The Sinus D is the largest series in the universal lathe segment. Conventional lathes like this are characterized by their robust design and high versatility. The design follows a classic design, but is based on a heavy, one-piece cast machine bed. As with heavy-duty lathes, the power transmission between motor and spindle is also achieved here via a manual lamellar clutch. With integrated functions such as the removable bed bridge, rapid traverse, and a taper turning device, this series offers optional solutions for machining long workpieces or large flanges. One-piece heavy cast bed with high stability Massive headstock with large spindle bearings Rapid traverse in 2 axes for fast positioning Taper turning attachment for additional applications Well-designed safety features You can find more lathes from well-known manufacturers on our website.

Condition: excellent (used), Year of construction: 2006, load capacity: 130 kg, arm reach: 2,900 mm, controller manufacturer: KUKA, controller model: KRC2, This system is equipped with a KUKA KRC2 control unit and features the KR 150 L130-2 2000 robot model. The robot offers a payload capacity of 130 kg and a reach of 2900 mm. It is suitable for high-precision applications. Main application areas: Spot and arc welding Heavy-duty material handling Palletizing Hnjdpfxow Idw Ij Akrsu CNC machine tending Press automation The robot is designed for reliable operation in demanding industrial environments. Model: KR 210 L150-2 2000 KRC2 ed05 Payload: 130kg Arm Reach: 2900 mm Condition: Used & Tested Year: 2006 Controller Cabinet: KRC2 ed05 Included: Manipulator + KRC2 ed05 Control Cabinet + All Wire Sets + Teach Pendant As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and designs for your specific production needs. ( Source : Kuka's Website )

Condition: good (used), Year of construction: 2000, Punch press Manufacturer: EHT Type: Strippit 1500/30 Year of manufacture: 2000 CNC control: Fanuc Working area without repositioning: 2500 x 1500 mm Hnedpfx Akjul S Eaoreu Maximum material thickness: 8 mm Punching force: 30 tons Turret with 46 tool stations, including 4 indexing stations, size D 3 programmable clamps Metal table Used exclusively in single-shift operation Includes tools from WILSON TOOL 51026

Condition: used, CNC control, PLC control, electronic modules, PLC module, plug-in card circuit board, circuit board, circuit board Hsdord Adqjpfx Akrjnu -Manufacturer: Baldor, circuit board electronic module circuit board from press brake HACO PPES 30135 -Type: TEM 060-06-01-1 -Individual components: see photos -Dimensions: 165/100/H250 mm -Weight: 0.9 kg

Year of construction: 2022, condition: ready for operation (used), overall weight: 8,500 kg, total height: 1,950 mm, This Metallkraft RBM 4 HMS Pro 3050-150 plate rolling machine was manufactured in 2022. It features a robust welded construction, induction-hardened rollers, and a hydraulic drive for the upper roller. The machine includes three digital displays for precise roller adjustments and a hydraulic folding plate for easy workpiece removal. Ideal for heavy industrial use with options for conical bending. Contact us for more information about this machine. Hodpfx Akox D Sulsrjnu Additional equipment • Teach-In NC control for automated bending processes (optional) • Mechanical auxiliary arm for handling heavy workpieces (optional) • Hydraulic side supports for stabilizing long sheets (optional) • Infinitely adjustable bending speed (optional) Machine Benefits Qualitative Machine Benefits • Three digital displays for precise adjustment of the roller position • Hydraulic folding plate for easy removal of the finished workpiece • Movable control panel for comfortable operation • Conical bending option • Hydraulic balancing system for the rollers to ensure parallelism • Safety emergency stop system Technical Machine Benefits • Maximum working width: 3050 mm • Upper roller diameter: 300 mm • Rolling speed: 1. 5 – 5 m/min • Minimum bending diameter: 450 / 1500 mm • For steel with 400 n/mm² strength, the machine allows pre-bending of 10/12 mm, full bending of 12/15 mm, and conical bending of 6/7. 5 mm. • For stainless steel (va), the machine allows full bending of 9/11. 2 mm and conical bending of 4. 5/5. 6 mm. • For aluminum, the machine allows full bending of 14. 4/18 mm and conical bending of 7. 2/9 mm. • Heavy, robust welded construction for industrial use • Induction-hardened rollers, suitable for bending stainless steel • Hydraulic drive for the upper roller with planetary gear Extra Information Technical Specifications Maximum working width: 3050 mm Upper roller diameter: 300 mm Rolling speed: 1.5 – 5 m/min Drive motor power: 11 kW Minimum bending diameter: 450 / 1500 mm Bending Capacities Steel (400 N/mm²): Pre-bending: 10 / 12 mm Full bending: 12 / 15 mm Conical bending: 6 / 7.5 mm Stainless steel (VA): Full bending: 9 / 11.2 mm Conical bending: 4.5 / 5.6 mm Aluminum: Full bending: 14.4 / 18 mm Conical bending: 7.2 / 9 mm Dimensions Machine Depth 5400 mm

Condition: used, Year of construction: 2003, functionality: fully functional, Ledinek High speed double side calibrate planer 150 m/min Rotoles 300 2V-KS 150 214 KW Hnjdszy Nxtepfx Akrju

Condition: as good as new (ex-display), Year of construction: 2025, High-pressure cleaning unit, high-pressure flushing unit, high-pressure built-in unit on hot-dip galvanized and painted high-quality steel frame with forklift pockets, suitable for installation in service vehicles. PTC Salmon, similar but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Salmon 60/200 | 60 l/min at 200 bar | Engine: Vanguard 35 HP 26 kW Salmon 75/150 | 75 l/min at 150 bar | Engine: Vanguard 35 HP 26 kW Salmon 30/300 | 30 l/min at 300 bar | Engine: Vanguard 35 HP 26 kW Salmon 45/240 | 60 l/min at 200 bar | Engine: Vanguard 35 HP 26 kW DIMENSIONS / WEIGHT: Dimensions without water tank (L x W x H): approx. 760 x 1,250 x 1,200 mm Dimensions with 400 l water tank (L x W x H): approx. 1,220 x 1,250 x 1,200 mm Dimensions with 800 l water tank (L x W x H): approx. 1,670 x 1,250 x 1,200 mm Empty weight without water tank: approx. 300 kg Empty weight with 400 l water tank: approx. 320 kg Empty weight with 800 l water tank: approx. 350 kg HIGH-PRESSURE PUMP:  Manufacturer: HPP  Model: CLW ENGINE:  Manufacturer: Vanguard  Model: 35 HP  Fuel: Gasoline  Max. Output: 35 hp (26 kW) CONTROL PANEL:  Start button  Operating hour counter  Electronic fuel gauge  LED display for oil temperature  LED display for low lubricating oil pressure  LED display for clogged air filter  LED display for engine speed  LED display for generator  LED display for spark plugs  Emergency stop button ELECTRICAL CONTROL:  Winding/unwinding of hydraulic hose reel;  On/Off bypass;  Engine speed control +/-;  Emergency stop button;  Switching to wireless remote control; INSTALLED ALARM:  Water shortage protection against dry running of the high-pressure pump with automatic shut-off function. SAFETY AND PRESSURE REGULATING VALVES:  The unit is equipped with a safety valve, a pressure regulating valve and a pressure gauge. HIGH-PRESSURE HOSE REEL:  Type: Electric hose reel  Material: Stainless steel  Capacity: max. 80 m ½“ and 80 m 3/8" high-pressure hose  Hose: 80 m ½“ high-pressure hose (included)  Hose guide: manual LOW-PRESSURE WATER SUPPLY HOSE REEL:  Type: manual hose reel  Material: Stainless steel  Capacity: max. 35 m ¾“ low-pressure hose  Hose: 35 m ¾“ low-pressure hose (included) WATER FILTER:  With washable cartridge and drain valve.  Filtration degree: 50 Mesh INCLUDED IN DELIVERY:  Multi-function wireless remote control IMET; - On/Off motor; - On/Off bypass; - Engine speed control +/-; - Winding/unwinding of hydraulic hose reel; - Emergency stop button;  Battery charger for wireless remote control;  300, 400, 500 or 800 l (with steel frame) water tank made of polyethylene; OPTIONAL ON REQUEST:  Pulsation/booster pump;  50 or 60 m ½“ high-pressure hose;  50, 60 or 80 m 3/8“ high-pressure hose with G3/4“ connection; ACCESSORIES ON REQUEST:  STORZ kit for connection to the water hydrant; Hnsdpfef Arugox Akreu  UNI 45 kit;  Version with 2 HD hose reels;  Mobile hot water generator 10 kW – 12 VDC;  High-pressure spray gun kit, swivel joint and quick coupling;  High-pressure lance kit with flat jet nozzle 15° / rotating nozzle;  Lance kit for high flow rate;  Rotating nozzle kit;  Double nozzle kit;  Water sandblasting lance kit;  Detergent dispenser kit;  Step cleaning device;  Surface cleaner;  Sludge suction device (Venturi);  Pipe cleaning nozzles;  Other accessories on request.

Condition: used, Year of construction: 1980, functionality: fully functional, Kohler straightening machine 30-400 - built in 1980 Hnodpsv Hrltsfx Akreu Number of straightening rollers 9 Max. belt width 400 mm GSW decoiler AHM 1500 - built in 1999 Mounted together on a base frame Further data and pictures on request

Condition: excellent (used), Year of construction: 2011, Arburg 1500T 3200-1300 e² / hybrid machine with one rotary table Year of manufacture: 2011 Injection unit: Screw diameter: 60 mm injection weight: 607 g Injection pressure: 2000 bar Metering volume: 664 ccm Clamping unit: clamping force: 320 t tie bar distance: 0x0 mm size of clamping platens: 1510 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 30.000 in automatic mode Hodjz Iqdqepfx Akrenu Euromap 67 Robot interface Control with air valve Hydraulic core pull x 3 Control with hot runners x 13 Injection unit hardened - bimetal Main machine motor - servo motor driven by inverter Very precise rotary table driven by servo motor controlled by inverter Rotary table diameter: 1500 mm Horizontal injection unit with automatic injection height adjustment Self-closing nozzle Primus sensor - mold pressure control It is possible to convert the injection unit so that it works vertically Dimensions: Weight: 16080 kg Length/width/height: 4.91x2.12x4.62 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: like new (used), Year of construction: 2013, functionality: fully functional, input voltage: 400 V, compressed air connection: 6 bar, year of last overhaul: 2025, warranty duration: 12 months, input frequency: 50 Hz, Useful printing format: 150x300. Frame lifting parallel to the printing plane. Printing plane adjustable on all three axes. Lift-O-Mat (device for progressive frame release), continuously adjustable from the operator side. Printing stroke adjustment via magnetic microswitches. Printing speed and ink return adjustable continuously and independently. Extremely uniform squeegee advance in the transverse direction, even at high speeds. Micrometric adjustment of the squeegee and blade pressure. Squeegee tilt adjustment. Two operating cycles: single and pulsed, for setup. Hjdpfjzqf D Tox Akrenu Printing plane with a honeycomb structure and anodized aluminum coating. Printing plane equipped with a vacuum device with pre-vacuum and blow functions. Quick removal of the squeegee and blade. Pneumatic frame locking system.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 615, overall weight: 8,700 kg, The Mori Seiki SL-303 BMC/1500 is a robust, high-precision 3-axis CNC inclined-bed turning and milling center. The model designation indicates a system with driven tools (BMC), C-axis, milling function (MC), and an extended distance between centers of 1500 mm for machining long workpieces (e.g., shafts). Hnodpfxjz N Dkbs Akrsu Equipment: -Single spindle, three-jaw chuck, automatic tailstock SMW Autoblock, 12-tool turret, automatic steady rest, chip conveyor Control: -MSG-501 (SL303-615) Key Features & Advantages: -Complete machining (Multi-Process): By using driven tools and C-axis control, milling, drilling, and threading operations can be performed directly after turning without re-clamping. -High rigidity: The massive cast iron inclined bed effectively dampens vibrations, which contributes to excellent surface finishes and a long tool life. -Thermal stability: Comprehensive cooling and oil circuits around the spindle minimize thermal expansion during long and heavy roughing operations. Accessories: -Workbench with partition (1 door, 3 drawers), containing: hand tools -Telescopic drawer cabinet (7 drawers), side shelf, containing: various turning tools and tool holders

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 7 / 8939 / 05 / 21, Used Reifenhäuser extruder Type: RH-241-1-50-30 WE DC-motor with 37 kW capacity screw dimensions : diameter 50 mm – 30 L/D Grooved feeding zone Hedpfx Akew Np Tkjrsnu With manual screen changer Fully functional You are welcome for inspection this (and further) extruders in our warehouse Königswinter The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned.

Condition: as good as new (ex-display), Year of construction: 2026, High-pressure cleaning unit, high-pressure flushing unit, high-pressure built-in unit on hot-dip galvanized and painted high-quality steel frame with forklift tines, suitable for installation in service vehicles. PTC Salmon, similar but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... Hnjdpfxoiky H Se Akrsu The following models are available: Salmon 60/150 | 60 l/min at 150 bar | Engine: Kohler 19 kW Salmon 45/200 | 45 l/min at 200 bar | Engine: Kohler 19 kW Salmon 35/250 | 35 l/min at 250 bar | Engine: Kohler 19 kW Salmon 30/300 | 30 l/min at 300 bar | Engine: Kohler 19 kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 760x1,250x1,200 mm Dimensions with 400l water tank LxWxH: approx. 1,220x1,250x1,200 mm Dimensions with 800l water tank LxWxH: approx. 1,670x1,250x1,200 mm Empty weight without water tank: approx. 370 kg Empty weight with 400l water tank: approx. 400 kg Empty weight with 800l water tank: approx. 430 kg HIGH-PRESSURE PUMP: - Manufacturer: HPP - Model: CLW - Flow rate: 30 - 60 l/min - Operating pressure: 150 - 300 bar ENGINE: - Manufacturer: Kohler - Model: KDW 1003 - Fuel: Diesel - Max. power: 26 hp (19 kW) CONTROL PANEL: - Start button - Operating hour counter - Electronic fuel gauge - LED indicators for oil temperature, low oil pressure, clogged air filter, tachometer, generator and spark plugs - Emergency stop button ELECTRICAL CONTROL: - Wind/unwind hydraulic hose reel; - Bypass on/off; - Speed control +/-; - Emergency stop button; - Switch to wireless remote control; INSTALLED ALARM: - Low water protection against dry running of the high-pressure pump with automatic shut-off function. SAFETY AND PRESSURE REGULATING VALVES: - The unit is equipped with a safety valve, a pressure regulating valve and a pressure gauge. HIGH-PRESSURE HOSE REEL: - Type: Electric hose reel - Material: Stainless steel - Capacity: max. 80 m ½“ and 80 m 3/8" high-pressure hose - Hose: 80 m ½“ high-pressure hose (included) - Hose guide: manual LOW-PRESSURE WATER SUPPLY HOSE REEL: - Type: manual hose reel - Material: Stainless steel - Capacity: max. 35 m ¾“ low-pressure hose - Hose: 35 m ¾“ low-pressure hose (included) WATER FILTER: - With washable cartridge and drain valve. - Filtration rate: 50 Mesh INCLUDED IN DELIVERY: - Multifunctional wireless remote control IMET; - Engine on/off; - Bypass on/off; - Speed control +/-; - Wind/unwind hydraulic hose reel; - Emergency stop button; - Battery charger for wireless remote control; - 400 or 800 l water tank (with steel frame) made of polyethylene; OPTIONAL ON REQUEST: - Pulsation/booster pump; - 50 or 60 m ½“ high-pressure hose; - 50, 60 or 80 m 3/8“ high-pressure hose with G3/4“ connection; ACCESSORIES ON REQUEST: - STORZ kit for connection to the water hydrant; - UNI 45 kit; - Version with 2 HD reels; - Mobile hot water generator 10 kW – 12 VDC; - High-pressure spray gun kit, swivel joint and quick coupling; - High-pressure lance kit with flat spray nozzle 15° / rotating nozzle; - Lance kit for high flow; - Rotating nozzle kit; - Double nozzle kit; - Water sandblasting lance kit; - Detergent dispenser kit; - Stair cleaning unit; - Surface cleaner; - Sludge suction device (Venturi); - Pipe cleaning nozzles; Further accessories on request.

Condition: used, pressure 150 t chamfer lenght 4300 mm distance between columns 3700 mm ram stroke speed 100 mm/sec working feed 8 mm/sec return speed 80 mm/sec stroke 175 mm table height 920 mm Control DELEM DA 52 total power requirement 11 kW Hnsdpfx Asv S Iryskrju weight of the machine ca. 15000 kg dimensions of the machine ca. 4800 x 1700 x 2850 mm Equipment: - Controlled axes Y1 - Y2 - X, as well as CNC crowning - DELEM DA52 CNC control - Electric backgauge (X-axis) - 4x manually adjustable stop fingers - 2x front support arms - AMADA UKB system upper tool holder - Side guard - Foot switch

Condition: used, Year of construction: 2007, DEMAG Ergotech System 1300/1500-11500 injection moulding machine from 2007 with 13,000 kN clamping force, 110 mm screw diameter and 5,200 g shot weight. Equipped with a Wittmann DR 853 227 linear handling robot (2014) featuring servo B axis 270° and C axis 90°, plus 32 hot runner control zones for advanced multi-cavity production. Factory-configured with 4 hydraulic core pulls and 12 cascade circuits for complex technical moulding applications. CNC CONTROL Controller: Demag Ergocontrol CLAMPING UNIT Clamping force kN: 13.000 Tie-bar clearance (H x V) mm: 1.500 INJECTION UNIT Injection unit size (Euromap): 11500 Screw diameter mm: 110 Max. shot weight (PS) g: 5.200 Hsdjzz Rw Hepfx Akrjnu MOULD FUNCTIONS & HANDLING Hydraulic core pull circuits: 4 Cascade / valve gate circuits: 12 Hot runner control zones: 32 Handling robot (model / year): Wittmann DR 853 227 (2014) Robot strokes X / Y / Z mm: 1.600 / 2.500 / 3.500 Robot rotary axes (B / C): C 90° / B servo 270° DRIVE Max. hydraulic pressure bar: 190 Mains connection V / Hz / A: 3 x 400 / 50 / 348 + 201

Condition: used, nett width 500 mm dimensions: ± 3.000 x 800 x 1.200 mm aluminum step: ± 2.150 x 700 mm gutter length: 2.300 mm loading height: ± 1.200 mm motor stainless steel 400V, 50 Hz Power: 5.20 A Hodpfx Ajz Imx Rskrjnu output height: ± 700 mm 1 vibration motor Shock absorbers Vibro feeder completely stainless steel Vibro gutter chassis steel + aluminium Opening grid: 4 mm and 8 mm

Condition: excellent (used), Year of construction: 2001, sheet width 2050 mm plate thickness 6.0 mm cutting angle adjustment 0.5 - 3.0 ° down holder 12 Stück no. of strokes 8 - 14 Hub/min back stop - adjustable 750 mm Hnodpfxoz St Rpj Akrsu work height max. 770 mm Control konv. total power requirement 7.5 kW weight of the machine ca. 3800 kg. range L-W-H 2650 x 2100 x 1750 mm From a maintenance workshop Very good condition (!!) Features - Robust, slide-guided electro-hydraulic panel shear - HACO control panelâ??front left * Easy operation directly at the cutting table * Adjustment of cutting angle and backgauge * Emergency stop button, latching - Electromotor-driven material stop/backgauge * Fine adjustment with handwheel (front left) - Electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the front * Eccentric adjustment - 1x long side stop - Front finger guard - 1x freely movable foot switch - Rear sheet metal chute - Operating instructions

Condition: used, Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller, servo module, axis amplifier, DC converter, axis amplifier, velocity control unit, spindle amplifier module, control unit Hnsdpferdil Rsx Akrou -Manufacturer: Robosoft, control unit from press brake HACO type PPES 30135 -Type: 411-1084 / 412-0112 / 412-0094 see photo nameplate -Dimensions: 295/190/H145 mm -Weight: 2.5 kg.

Condition: excellent (used), functionality: fully functional, Automatic lathe Locatelli OMK300 + UF 150/220 Turning length: 300 mm Maximum square bar: 100x100 mm Minimum square bar: 20x20 mm Hjdpfjy R T N Tex Akrjnu Copy turning operation Drilling transfer UF 150/220

Condition: good (used), Year of construction: 2017, Machine is stand-aloneBlows products with metal in them off the belt with compressed airHas been used for herbsThe machine detects: Ferrous; NON-Ferrous; Stainless steel Hedsz Rchujpfx Akrenu The VARICON+ compact metal detection system is designed to ensure safe and efficient throughput with maximum sensitivity for metal detection. Key features include: Robust Construction: Built with a durable stainless steel conveyor belt, capable of inspecting cargo up to 50 kg.Short Metal-Free Zone: Its particularly short metal-free zone (MZ) guarantees fail-safe and reliable inline metal detectionHygienic Design: The VARICON+ is designed for easy and thorough cleaning, ensuring high hygiene standards.Certifications: The system meets BRC, IFS, and HACCP certification standards, highlighting its quality and compliance with food safety regulations.Protection Class: Comes with IP65 protection, ensuring resistance to dust and water ingress. Overall, the VARICON+ combines advanced technology and hygienic design to ensure maximum reliability and safety in metal detection for various applications. More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery