Used Heidebrenner Ako 70 for sale (12,348)

Year of construction: 2021, operating hours: 4,748 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5 water-cooled, 1000 liters, year of manufacture 2021, operating hours 4979.69 h For sale is a used temperature test chamber manufactured by Weiss Technik. This chamber is utilized for testing components and materials under various temperature conditions (e.g., cold, heat, aging). Designation breakdown: T = Temperature test chamber 1000 = approx. 1000 liters volume 70 = low temperature range (-70 °C) e = energy-optimized design 5 = temperature change rate (model series) Equipment/features: - Stainless steel interior - Recirculating air fans - Touch control (WEBSeason) - Viewing window - Automatic/manual temperature control Nedjy El Ttepfx Ag Dewf Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rates: Cooling approx. 6 K/min Heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1200 kg For your safety as a buyer, please note the following information! The following work is carried out on our offered chambers beforehand: 1. Functional inspection and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to changes and errors in technical data; specifications may vary!) If you have further questions, we are happy to assist you by phone.

Condition: used, LPG forklift truck, gas-powered forklift STILL type RX 70-16T Serial no.: 517314G00021 Year of manufacture: 2016 Rated capacity: 1600 kg Lift height: 4920 mm Fork length: 1000 mm Fork carriage width: 980 mm Overall height: 2160 mm Overall width: 1100 mm Overall length without forks: 2200 mm Unladen weight: 3040 kg - Triplex mast with full free lift 1550 mm - Hydraulic sideshift - LPG-electric drive - 4-cylinder Volkswagen LPG engine with 30 kW - Hydraulic power steering - Front working lights - Reversing warning light (blue) - Rear flashing warning light (yellow) - 4-wheel superelastic, solid rubber tyres, front 18X7-8 SE / rear 18X7-8 SE - Battery charger for the starter battery, VICTRON maintenance charger - New TÜV safety inspection UVV (surcharge 150,-- EUR net) Good condition Njdpeinldwofx Ag Dowf

Condition: reconditioned (used), Year of construction: 2021, portalkran 2x35 ton 25 or 28 meter spann longer possible Nwodpfxeggggpj Ag Def

Condition: used, mileage: 31,725 km, power: 375 kW (509.86 HP), first registration: 05/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), Standard warranty of 2 years up to a maximum of 100,000 km, drivetrain warranty of 4 years or 200,000 km. EBS, full braking assistant, EasyStart, LED lighting, 2 rotating beacons on cab roof, rear view camera pre-installation, ASR, emergency braking assistant, emergency braking assistant EBA, lane departure warning LDW, MAN Attention Guard, retarder, rotating beacons on cab roof, MAN Mediasystem Navigation Advanced 7'', navigation map Europe + Russia, Rio Box. Fifth wheel coupling height 40 mm, fifth wheel coupling JOST JSK 37 C 2'', 185 mm fifth wheel height, fifth wheel lead 1,075 mm. Hydraulic system for tipper semi-trailer 2-line system, Meiller, 275/150 bar, hydraulic coupling type G, 1 inch. Coupling height 1.30 m. Standard fifth wheel plate not suitable for heavy-duty operation!!!! Nsdpfx Aovw H D Sog Djwf

Condition: ready for operation (used), Year of construction: 1987, machine/vehicle number: 402, functionality: fully functional, cutting height (max.): 70 mm, cutting width (max.): 3,200 mm, saw blade diameter: 300 mm, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 70 mm, Equipment: scorer, Cutting length: 3200 mm Cutting width: 3200 mm Nwodpfxovi H Dis Ag Djf Width stop: Gear motor adjustment Main saw unit: saw blade Ø 300, Ø 30, Z=60, SH 70 Scoring unit: yes - saw blade Ø 125, Ø 20, Z=24 Softforming unit: no Side pressure unit: yes - Version: FR 50/100 Residual cutting device: yes - Pressure beam recess Veneer cutting device: yes Trimming device: yes - Spacing: 145/525/1790 Support table front: 400 x 1400 mm - 2 pieces Rear support table: 240 x 2960 mm - 1 piece Support bars rear: 40 x 2960 mm - 5 pieces Angled table: 480 x 1400 mm left Angle ruler: with pull-out Collets: 4 pieces - floating - distance 70/400/1600/2800 Stop jaw: 2 pieces - rigid - distance 1000/2200 additional foot at the rear : no - 3 feet safety guard: yes foot switch : no Machine cuts from: left to right unit can emerge in any area: no automatic lowering with saw overtravel: no 3-step cutting height adjustment: no Main circular saw: 7.5 kW, 380 V, 2870 rpm, 50 Hz Scoring saw: 1.1 kW, 380 V, 2800 rpm, 50 Hz Width stop adjustment motor with torque compensation: fine input motor: 0.12 kW, 380 V, 1380 /min, main motor: 0.35 kW, 380 V, 1350n.

Condition: good (used), Gear cutters, module cutters, hob cutters, tooth form cutters, module milling heads, end mill cutters, roller cutters, milling cutters, hob cutters, splined shaft hob cutters, gear hob cutters, slotted hob cutters, rack cutters -Manufacturer: Reinecker, hob cutters, 2 pieces -Type: Ø 70 mm / Ø 67 mm KHSS-E Nwjdpfxoy D Nkms Ag Djf -Hole: Ø 27 mm -Price/Fee: complete -Transport dimensions: 135/70/H70 mm -Weight: 2.1 kg

Condition: ready for operation (used), functionality: fully functional, empty load weight: 2,580 kg, maximum load weight: 32,000 kg, loading space length: 3,000 mm, loading space width: 2,500 mm, loading space height: 720 mm, loading space volume: 7.5 m³, Year of construction: 2009, Platform transport trolley Brand: Plan Type: 70-4 Dimensions platform: 3000X2500/H720 mm Nsdpfx Agswarxxo Dowf Load capacity: 32000 kg Total dimensions: 5100x2500/H 720 MM Year of construction: 2009 Own weight: 2580kg This trolley is double steered and has double full rubber wheels with metal rims. The triangle is removable and can also be hung on the other side of the trolley. The floor is fitted with a thick iron tear plate.

Condition: excellent (used), Weiss WT-1000/70/5 Temperature Test Chamber For sale is a pre-owned temperature test chamber manufactured by Weiss, model WT-1000/70/5. This unit is designed for precise temperature testing in industrial and laboratory environments, and is suitable for use in research, development, and quality assurance applications. The test chamber allows for reproducible temperature cycles across an extended temperature range and is particularly suitable for material testing, aging tests, and stress tests under defined temperature conditions. Technical Data Manufacturer: Weiss Model: WT-1000/70/5 Type: Temperature Test Chamber Temperature Range: -70 °C to +180 °C Temperature Deviation (over time, center of usable space): ± 0.1 to ± 0.5 K Temperature Homogeneity (spatial): ± 0.5 to ± 2 K Heating rate: 6.1 K/min Cooling rate: 6 K/min Test chamber volume: approx. 1000 liters Test chamber dimensions (approx.): 950 x 1100 x 950 mm (H x W x D) External dimensions (approx.): 2000 x 1415 x 2105 mm (H x W x D) Permissible total load, test chamber floor: 150 kg Permissible load per shelf: 50 kg Rated voltage: 3/N/PE AC 400 V ± 10% / 50 Hz Rated current: 38 A Rated power: 26 kW Refrigerants: R404 / R23 Weight: approx. 955 kg Features - Water-cooled system - Spacious test chamber - High rate of temperature change - Industrial grade construction Condition Used, with age- and use-related signs of wear. Service / Inspection For quality assurance, the following work is carried out on the offered systems: - Function check and replacement of necessary components - If required, refilling with legally compliant refrigerant - Leak test with certificate Nwedsy D Nyujpfx Ag Djf - Documented test run following successful inspection Scope of delivery - Weiss WT-1000/70/5 temperature test chamber - Accessories as shown Notes - Connection via 400 V three-phase power required - Shipping by freight carrier required due to size and weight - Sale from commercial inventory - All information subject to change - Prior sale reserved - For further information, feel free to contact us.

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Lamella – Carcase Press with Rapid Traverse Technical specifications: Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm, depth 700 mm; - Upper lamella pressing beam with 6 elements, side lamella pressing beam with 5 elements - Lamella pressing beams with field-proven tolerance compensation for tightly pressed carcase joints Nwjdpfx Agjy Egz Se Def - Counter-pressure surfaces are continuous, coated support plates, 40 mm thick - The pressing force of the pressing beams is infinitely variable via two potentiometers and set electronically via frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressing beams: min. 500 daN (kg) up to infinitely adjustable 2,200 daN (kg) max. - Pressing force for vertical pressing beams: min. 300 daN (kg) up to infinitely adjustable 2,200 daN (kg) max. - Including option: Rapid traverse speed for quick positioning of the pressing beams, controlled by automatic workpiece detection with sensors in the pressing beams; pressing speed 5/10/25 mm/sec and rapid traverse speed 50 mm/sec. Sensors can be deactivated for pressing special parts. - Jog mode for precise positioning of both pressing beams, e.g., for low pressing forces, drawers, and carcases at 45 degrees. Easy operation via six separate push buttons, freely adjustable pressing time preselection with automatic opening feature, loading height 300 mm. The machine is available from our showroom and can be delivered immediately. Location: ex-stock 54634 Bitburg - available immediately -

Condition: like new (used), Year of construction: 2022, machine/vehicle number: 1080.241, functionality: fully functional, power: 7 kW (9.52 HP), input voltage: 480 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, operating speed: 51,025 mm/s, Brief Introduction: • With field-proven tolerance compensation (GANNOMAT system) • Two potentiometers for infinitely variable pressing force adjustment • Minimum pressing force 300/500 daN (kg) on Concept Eco • Maximum pressing force 2200 daN (kg) on Concept Eco • Three pressing and adjustment speeds: 5 / 10 / 25 mm/sec. (with fine positioning / inching mode) • Freely adjustable pre-selection of pressing time with automatic opening feature • Concept Eco: Simplest operation via six separate push buttons for eight movement sequences • Concept Primus: Simplest operation via LCD display • Field-proven tolerance compensation (GANNOMAT system) • Electromechanical carcass press with frequency-controlled geared motors • Independent vertical and horizontal pressing beams • High durability thanks to established, high-quality components • Robust and solid frame construction Nwsdpfsy Hgn Usx Ag Djf • Space-saving design • Carcass pressing = Simple + Fast + Efficient + Flexible + Precise + Professional • Easy operation through a user-friendly control panel • Fast thanks to pressing beam positioning speeds up to 50 mm/sec (option) • Efficient due to precise pressing of various carcass sizes • Flexible through adjustable parameters such as pressing force, pressing time, and traverse speeds • Precise through angle-accurate pressing of furniture carcasses and drawers • Professional carcass and drawer production with state-of-the-art carcass presses

Condition: excellent (used), Year of construction: 2009, operating hours: 78,099 h, functionality: fully functional, screw diameter: 25 mm, Arburg 520S 1600 290/70 2-component 12.3 million cycles 86,565 hours manual operation 78,099 hours automatic operation Injection unit 1 horizontal 290, diameter 25, max. 71 cm³ Nwodpfx Aoxzix Aeg Def Injection unit 2 vertical 70, diameter 18, max. 21 cm³ Opening stroke 925 mm Electric index rotation 12-zone hot runner integrated 3x core pull 2x air blow (control for needle shut-off) Various customer inputs and outputs Interfaces: ALS Temperature control units Dryers Multilift H 6kg: 2x vacuum 5x double-acting grippers Z-axis servo 800mm C, G, X, and B-axes pneumatic Various customer inputs and outputs (gripper monitoring, etc.) Important Notice!!! Current update – Tax note and benefit for used machinery From 01.07.2025, used machines can also be considered for tax purposes with a special depreciation of 30% per year. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine. Keyword: Growth Booster (§ 7 Section 2 EStG-E)

Condition: excellent (used), Year of construction: 2009, operating hours: 78,100 h, functionality: fully functional, screw diameter: 25 mm, Arburg 520S 1600 290/70 2-Component 78,099 hours, automatic Injection Unit 1: horizontal, 290mm, diameter 25mm, max. 71 cm³ Injection Unit 2: vertical, 70mm, diameter 18mm, max. 21 cm³ Opening stroke: 925 mm Electric table indexing 12-zone integrated hot runner 3x core pulls 2x air blow (control for needle shut-off) Various customer-specific inputs and outputs Interfaces: - ALS - Temperature control units - Dryers Multilift H 6kg: - 2x vacuum - 5x double-acting grip - Z-axis servo 800mm - C, G, X, and B axis pneumatic - Various customer-specific inputs and outputs (gripper monitoring, etc.) At Maschinen-Handel, we offer a commissioning guarantee for every machine purchased from us, meaning the machine will be started up by the manufacturer. This offers you, as a customer, maximum security on the used machinery market. Important Note!!! Current legal update – Tax advantage for used machinery Effective from 01.07.2025, used machines can also be subject to an annual special depreciation of 30%. In addition to the lower price compared to a new machine, you can benefit from the same depreciation allowances as with a new machine. Keyword: growth booster (§ 7 Paragraph 2 EStG-E) Nwsdpfx Agjx A Dy Rj Def

Condition: used, Year of construction: 2022, load capacity: 5,000 kg, lifting height: 7,270 mm, total length: 5,670 mm, - Tragfähigkeit: 4999 kg - Lastschwerpunkt: 500 mm - Lastabstand 540 mm - Achslast mit Last vorn 10468 kg - Achslast ohne Last vorn/hinten 2956/3635 kg - Reifengröße vorn: 355/45-15 - Reifengröße hinten: 250-15 - Räder Anzahl vorn/hinten: 2x/2 - Spurweite: vorn Einfachreifen 1210 mm - Spurweite: vorn Doppelreifen 1364 mm - Spurweite hinten 1120 mm - Neigung Hubgerüst/Gabelträger, vor/zurück 3/7 Grad - Sitzhöhe: 1298 mm - Kupplungshöhe: 496 mm Nwodpfx Agoy E Uiks Dsf - Gabelträger: Kategorie 3 / Forma A - Arbeitsgangbreite bei Palette 1000 x 1200 quer: 4470 mm - Arbeitsgangbreite bei Palette 800 x 1200 längs: 4670 mm - Wenderadius: 2730 mm - Kleinster Drehpunktabstand: 746 mm - Fahrgeschwindigkeit mit/ohne Last 20/20 km/h - Hubgeschwindigkeit mit/ohne Last min. Lüfterdrehzahl 0,50/0,53 m/s - Senkgeschwindigkeit mit/ohne Last 0,50/0,50 m/s - Steigfähigkeit mit/ohne Last />30 % - Betriebsbremse mechanisch - Motorhersteller/Typ Deutz/TCD 2,9 L4 - Nenndrehzahl: 2200 1/min - Max. Drehmoment 260 Nm - Anzahl Zylinder/Hubraum 4/2900 cm³ - Arbeitsdruck für Anbaugeräte 250 bar - Ölmenge für Anbaugeräte 30 l/min - Anhängekupplung Bolzen

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, TipperTie double clipper Model: KDMCA 70 Caliber: 25 - 75 mm, also suitable for ring-shaped products (thread dispenser) Accessories: 1x nozzle Nwjdoy Eq Aqopfx Ag Dof 1x brake 1x filling cable 150,000x Clips E 220 T Shipping possible

Condition: excellent (used), - Dimensions: 2254x1150x1680 mm - Operating hours: 1147 hours - Power: 70 kVA / 61 kW Nodpjwyc Ttjfx Ag Dewf - Type: Diesel - Engine type: JOHN DEERE - Model: 4045TF150 - Rated speed: 1500 rpm - Tank capacity: 190 L - Consumption (at 75% load): L/h - Voltage: 230/400 Volt - Weight: 1597 kg

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor GKF 1650-750-550 IR600 70° right RA1441 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 1650 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 70° degrees support feet: optional Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Characteristic / Accessories: Lateral guides included on both sides Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Nwjdpfx Agek Abazo Djf For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor left GKF 70° degrees-770-600 IR600 RA1415 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length middle radius (NL): 1100 mm Frame width (NB): 770 mm with Motor 940 mm belt width (GuB): 600 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 70° degrees support feet: optionally available Conveying speed (v m/s): 0,8m/s, frequency converter for an additional charge Drive: SEW gear motor SA47/T DT80N4 Electrical data: 50Hz V220-240, kW 0,75 / S1 Year of construction: 2001 Special feature / Accessories: Lateral guides included on one sides Optionally available: Nodpfx Ask Abf Ujg Dewf Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2000, Transnorm belt curve conveyor left GKF 70°-730-600 IR600 RA1936 The Transnorm belt curve is fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Frame width (NB): 730 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 600 mm Njdpfx Aok Ablpjg Dowf Conveying angle: 70° degrees support feet: optionally available Conveying speed (v m/s): freely adjustable with frequency converter between 0,032 and 1,17m/s, Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 / S1 Year of construction: 2000 Scope of delivery: without supports Optionally available: Supports Side guide one- and both sideds Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), Year of construction: 2000, Ref. -No.: 10588 Manufacturer: HEDELIUS Type: CB 70 - 3200 Year of construction: 2000 Type of control: CNC Control: Heidenhain TNC Storage location: Halberstadt Country of origin: Germany Machine-No.: 0032XXXX Space requirement: 7200 x 3400 x 3100 Length x width x height (mm) X-Travel: 3200 mm Y-Travel: 720 mm Z-Travel: 600 mm Table Height: 900 mm Number of T-slots: 5 Max. Workpiece Weight: 3000 kg Max. Tool Length: 330 mm Clamping Area: 3900 x 650 mm T - groove width: 18 mm T - slot spacing: 125 mm Tool Taper: DIN 69871 AD 40 Spindle Speed: 30 - 8000 RPM Max. Torque: 102 x 240 Nm Feed Speeds X/Y/Z Axis: 30000 mm / min Rapid Travel X/Y/Z: 30 / 30 / 30 mm / min Total Power Requirement: 50 kW Borehole Diameter: 28 x 44 mm Max. Feed force: 9000 / 9000 / 9000 kN Distance between spindle nose and table: 140 - 740 mm Number of tools: 30 Pcs Tool clamping: Tellerfeder Njdpfjy Ed Ivox Ag Dswf Max. milling capacity: 400 x 600 Max. thread diameter: M20 x M30 mm coolant: 250 bar Further information: - L = 7.50 m Special accessory: automatic door - H = 3.60 m Special accessory: full cladding of working area - Ø 125 mm only with free side spaces 35 mm The machine can be viewed under power by arrangement.

Year of construction: 2025, condition: new, New machine Nsdpfx Ajw Nafkog Dswf Year of manufacture: 2025 Features and technical specifications: Fully equipped in standard version with: - Robust, torsion-free steel frame, welded and bolted construction - Lamella pressure beam TOP with 6 elements, lamella pressure beam SIDE with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface, height 95 mm, on lower vertical pressure beam - Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir - The pressing process is carried out electromotorically, via 2 independent worm gear motors (2 x 0.75 kW) - Pressing force of the pressure beams is infinitely variable and electronically controlled by 2 potentiometers, regulated via frequency inverter, ensuring absolutely wear-free force control - Pressing force for horizontal pressure beam: min. 500 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning, using 3-stage selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcasses at 45° - Simplest operation via 6 separate push buttons, 8 movement cycles selectable via control panel - Freely adjustable press time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressure beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed, for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special components Including a set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term

Condition: used, Year of construction: 2023, operating hours: 102 h, 2023 | SEBA New Evolution 70-40 Jaw | Used Crusher | 102 hours Nsdpoytnykefx Ag Dewf 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 112000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 82 inspection points 78 approved ✅ 3 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Well kept Jaw chrusher from 2023 , few scrathes on it , conveyorbelts all look OK, left track needs Some tension , jaw and upperdeck in good condition , no further issues during inspection 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39845 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: reconditioned (used), functionality: fully functional, warranty duration: 6 months, input voltage: 400 V, year of last overhaul: 2026, DGUV certified until: 05/2027, working width: 700 mm, conveyor belt width: 700 mm, type of input current: three-phase, Croissant Winding Machine Universum HWM 50/70 EZ For all stick-shaped products such as Kornspitz, pretzels, and lye sticks, etc. Universal combination winding machine Suitable for all doughs for winding and long rolling Rugged technology Croissant winding machine for consistently high quality! Only with us: DGUV V3 tested Connection: 400V, 16A-CEE plug Used machine—refurbished & SAB tested with warranty and spare parts service Njdey Ebiwopfx Ag Dowf Visit our large showroom!

Year of construction: 2010, condition: excellent (used), functionality: fully functional, 1 x Giemme Thermo Packaging Machinery S.r.l. semi-automatic shrink bundling machine. Model – ALTAIR 70 P. Serial number – 001.041.10. Date of manufacture - 2010. Speed – up to 12 packs/minute. Electrical supply – 400 V / 50 hz / 3 phase. Nwsdpfoyzxgfsx Ag Dsf Power – 20 kW. Overall dimensions – 3000mm long x 1200mm wide x 2000mm high.

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 10,649 h, load capacity: 7,000 kg, lifting height: 5,000 mm, free lift: 1,250 mm, load center: 700 mm, fuel type: diesel, mast type: duplex, construction height: 3,750 mm, motor manufacturer: PERKINS, fork carriage width: 1,500 mm, fork length: 1,400 mm, fork width: 200 mm, fork thickness: 70 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 10.00-20 SE, rear tire type: superelastic tires (black), rear tire size: 10.00-20 SE, overall weight: 19,400 kg, empty load weight: 12,400 kg, total height: 3,400 mm, total length: 5,000 mm, total width: 2,300 mm, color: yellow, Equipment: cabin, lighting, pallet forks, 🚜 USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS 📌 Years of experience | 🛠️ In-house service & paint shop | 💼 Professional consultancy | 🚚 Own transport | 🤝 After-sales support Looking for a forklift you can truly depend on? We are an established dealer of new and used forklifts with a longstanding tradition. We serve clients throughout Europe – from small companies to major international industrial facilities. Our forklifts are more than just machines – they are a guarantee that your logistics will operate smoothly and reliably. ⭐ What sets us apart? ✅ Every forklift undergoes a thorough technical inspection (servicing, testing, filter and oil replacement, refurbishment of main components) Nwedpfx Agsy Hldho Dof ✅ Full safety inspection (UDT) available on request ✅ In-house paint and service workshop – machines perfected aesthetically and technically ✅ Europe-wide transport – performed with our own fleet and trained drivers ✅ Operator training at delivery + practical on-site demonstration ✅ After-sales service & technical support – support continues after the sale ✅ Possibility to visit & test the machine at our premises – you are welcome! ✅ Hundreds of satisfied customers across Europe – join those who already trust us ✅ Financing assistance – we cooperate with most leasing companies ✅ Invoice in EUR or PLN – as per customer preference 🔹 Current Offer: BAUMANN GS 70/14/50 – 7 T Side Loader 📅 Year of manufacture: 2007 ⏱️ Operating hours: 10,649 h ⚡ Power: Diesel 🏋️ Capacity: 7,000 kg – load centre 700 mm 🗜️ Mast: Duplex – 5000 mm 🔧 Forks: 1200 mm 🛞 Superelastic tyres: 100% condition 🛠️ Technical condition: Excellent – after full service ✨ Visual condition: Well-maintained, rust-free, ready for work 📏 Free lift: 1250 mm Dimensions: 📐 Truck height: 3400 mm 📐 Total length: 5000 mm 📐 Width: 2300 mm 📐 Fork positioner width: 1500 mm 📐 Overall height: 3750 mm 🏭 Ideal applications: Warehouses with narrow aisles Wood, steel, and pipe industries Handling of long goods Both indoor and outdoor operations

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 4,171 h, load capacity: 2,500 kg, lifting height: 3,680 mm, fuel type: diesel, mast type: simplex, construction height: 2,480 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift truck Mast type: Standard Nwsdpfx Agoy Dwfxe Def Transmission: Automatic Condition: Refurbished without warranty Technical condition: Very good Front tyres type: Superelastic Front tyres condition: 60 - 80% Rear tyres type: Superelastic Rear tyres condition: 40 - 60% Description: Price includes new UVV (safety inspection), new paintwork, and air conditioning maintenance. We are happy to arrange cost-effective transport for you. Leasing with option to buy is generally possible! We are an official Jungheinrich partner. Sideshift, 3rd valve, rear work lights, front work lights, heating, road registration (StVZO), full cabin, air conditioning, CE certificate, Mini levers,