Used Heinen Ct15(Reduced) for sale (2,627)

Condition: excellent (used), machine/vehicle number: 11 020 021/10 EU0148, functionality: fully functional, power: 10.2 kW (13.87 HP), Dry air dryer Luxor LS 80 Connection value 10.2 kW Nodpfx Akey Exfijuewg Dry air flow rate 80 m3/h Heater 6.5 kW Silos Motan BS 250-LN-0-0+EU1 Volume 250 L Heater 2.5 kW Material conveying unit Motan Type METRO SG HES 80 BT Power 1.1 kW The technical condition of this system is excellent!!! PRICE REDUCTION FROM 3550 TO 3250 EUR!!!

Condition: excellent (used), machine/vehicle number: 07 021 060/06 0031, functionality: fully functional, power: 9.7 kW (13.19 HP), number of chambers: 1, Dry air dryer Luxor LS 50 Connection value 9.7 kW Dry air flow rate 50 m3/h Heater 6 kW Silos Motan BS 60-L Volume 60 L Heater 1.55 kW Material conveying unit Motan Type METRO HES 50-1ANC-AAA-B-A Power 1.1 kW Nwjdpfx Aksy Examsueg The technical condition of this system is very good! PRICE REDUCTION FROM 2550 TO 2250 EUR!!!

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Compressor: Manufacturer: Kaeser Model: SM 12 Year of manufacture: 2016 Power: 7.5 kW Operating pressure: 8 bar Refrigeration dryer: Manufacturer: Kaeser Nwodpfxewx I Ruj Akueg Model: ABT 12 Year of manufacture: 2016 Refrigerant: R-134a Tank: Manufacturer: BWB Behälter-Werk Year of manufacture: 2016 Pressure: 11 bar Capacity: 270 liters After oil and filter inspection (replacement) Technical condition: perfect! PRICE REDUCED FROM 4250 TO 4000 EUR!!!

Condition: new, Screen Nwjdpfxexq S U Ej Akueg Type ELD 400/1 B 6771/00 StCd: A0E0 Week 48-95 PRICE REDUCTION FROM 500 TO 400 EUR!!!

Year of construction: 2000, condition: excellent (used), functionality: fully functional, Manufacturer: Wanner Technik GmbH Model: 13.20 Nwjdpfxsyz U Eks Akuog Grinding chamber dimensions: 130 x 200 mm Power: 2.2 kW Cascade knife arrangement New knives!!! PRICE REDUCTION FROM 1350 TO 1250 EUR!!!

Condition: excellent (used), Heavy Linck reduction gear for sash drive up to 160 KW Shaft diameter 110 mm. Triple bearing. Nwedpfxofn Rige Akuog 1 pulley 1250 x 315. 1 pulley 630 x 315 mm. Other transmissions also available.

Year of construction: 2026, condition: new, Slow-speed, side-by-side granulator Rotor diameter (mm) 180 Rotor width (mm) 180 Rotor speed (rpm) 150 Drive (kW) 3 Number of rotor blades 18 Number of stator blades 2 Screen perforation (mm) >5 Approx. weight (kg) 140 The slow-speed side-by-side granulators of the GSL series are primarily used in injection molding and blow molding for the inline reduction of sprues and defective parts. Various hopper and extraction systems allow the machines to be flexibly integrated into existing installations. Nwsdpfxjqmik Is Akujg GSL 180 For the comminution of sprues from injection molding and blow molding Highlights of the GSL series: Low noise thanks to the low rotor speed, angled cut, and soundproof hopper in a multi-layer sandwich design. Powerful and efficient drive thanks to a brand-name gearbox. Easy maintenance, cleaning, and knife replacement. The slow-running, stand-alone granulators of the GSL 180 series feature a closed rotor with a diameter of 180 mm. The machines are available in working widths from 120 mm to 430 mm. The rotor consists of individual discs directly connected to the spur gear unit via an oversized drive shaft. This enables efficient and low-maintenance power transmission. The material to be crushed can be fed by hand, by conveyor belt, or by robot via a generously dimensioned, soundproof hopper in a sandwich design. The granulator is mounted on a low base frame on casters as standard. The mill is emptied via an extraction tray inserted beneath the screen with a pipe connection for a suction conveyor. Applications The slow-running, stand-alone mills of the GSL 180 series were specifically developed for the size reduction of sprues from injection molding and blow molding. Easy accessibility allows for quick color and material changes. The low rotor speed also allows for the processing of both soft and hard materials, ensuring good material quality with low dust content.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, conveyor belt length: 4,000 mm, conveyor belt width: 800 mm, Manufacturer: Virginio Nastri Length: 400 cm Width: 80 cm PRICE REDUCTION FROM 1650 TO 1500 EUR!!! Nodpfjwanf Ijx Akuewg

Condition: like new (used), Year of construction: 2018, functionality: fully functional, conveyor belt length: 6,000 mm, conveyor belt width: 2,000 mm, Manufacturer: MB Conveyors Model: PA ALL Nwsdpfjwfym Ijx Akujg Year of manufacture: 2018 Length: 600 cm Width: 200 cm Conveyor belt in as-new condition! PRICE REDUCTION FROM 2950 TO 2750 EUR!!!

Year of construction: 1994, condition: excellent (used), functionality: fully functional, Manufacturer: Rapid Nwjdpfx Akswg R S Reusg Model: 2645-KU 3 rotor knives 2 stator knives Power: 12 kW Slow-speed granulator with soundproof enclosures PRICE REDUCED FROM 4,250 TO 3,850 EUR!!!

Year of construction: 2003, condition: good (used), functionality: fully functional, Manufacturer: HERBOLD Model: CS450/600-2A Rotor / grinding chamber dimensions: 450 x 600 mm Number of rotor knives: 5 Number of stator knives: 2 Drive motor power: 22 kW Replacement knives: 3 pieces Additional screens: 5 pieces Equipment: Milled material discharge + silo This mill features three additional, different material feed systems (various designs)!!! Nwsdpfexl R Imex Akuog PRICE REDUCTION FROM 10,500 TO 9,000 EUR!!!

Condition: excellent (used), Year of construction: 2019, Urschel Comitrol in almost brand new condition. Bought new in 2019 and only used for tests. Nwodpfx Aexvt Idokujg

Condition: good (used), Year of construction: 1999, Selogica control system All cards Removed from a running Arburg 420 C 1000-350/150 Individual cards can also be sold!!! Nwedpsw Tkdfofx Akueg PRICE REDUCTION FROM 2500 TO 1950 EUR!!!

Condition: excellent (used), functionality: fully functional, Proportional Valve Set Manufacturer: Bosch Type 0811404666 Type 1817414313 Price for both valves: 1,500 EUR PRICE REDUCTION TO 1,200 EUR!!! Nodpfxowkucbs Akuowg

Condition: good (used), Year of construction: 1999, functionality: fully functional, Screen with keyboard Removed from Arburg 420C 1000-350/150 Nwsdov Tp Nvjpfx Akusg PRICE REDUCTION FROM 1000 TO 900 EUR!!!

Condition: good (used), Year of construction: 1999, functionality: fully functional, Injection unit Type 150 Removed from Arburg 420C 1000-350/150 Screw diameter: 35 mm Complete with hydraulic motor, valves, etc. PRICE REDUCTION FROM 1200 TO 950 EUR!!! Njdpfxov Tp Ncj Akujwg

Year of construction: 2022, condition: used, functionality: fully functional, Reduction furnace for N2/H2 atmosphere - BADER & SCHEFFER Nsdpfoxp Exusx Akuewg

Condition: used, various adaptors for MK pictures 5 x 5 on 4 2 x. 5 to 3 1 x. 5 to 2 1 x. 5 to 1 1 x. 6 to 4 1 x. 6 to 5 1 x. 4 to 3 1 x. 3 to 2 Nwedpfx Aedgcd Ajkueg

Condition: as good as new (ex-display), 4 different adaptors for direct clamping Make WNT Length 55 mm ID: 28 322 5 G 200 28, 322 0 G 200 28.321 6 G 200 Nwjdpfx Akedgc D Rjusg 28.40 2 0 S

Condition: good (used), Year of construction: 1994, functionality: fully functional, Manufacturer: S.P.A Magic M.P. Model: MGL2D This blow molding machine is fully functional. It is still in production and can be inspected by appointment. Nsdpfx Asxxp Tbskuowg Videos can be provided upon request. PRICE REDUCTION!!! From 21,000 to 19,000 EUR!

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,300 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold complete with collets, toolholders, and additional accessories! For more Schütte multi-spindle machines available from the same location, see below! TECHNICAL DETAILS Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle pitch circle diameter: 300 mm Standard/special bar feed: up to 125 / 290 mm Standard longitudinal slide travel, total/traverse: 100 / 80 mm Special longitudinal slide travel, total/traverse: 145 / 115 mm Cross slide travel – upper slide, total/traverse: 50 / 33 mm Cross slide travel – middle slide, total/traverse: 50 / 30 mm Cross slide travel – lower slide, total/traverse: 60 / 37.5 mm Number of spindle speeds: 49 Spindle speed range I: 450–3,150 rpm Spindle speed range II: 200–1,400 rpm Workpiece revolutions per cycle, standard: 60–425 Workpiece revolutions per cycle, reduced: 33.5–236 Workpiece revolutions per cycle, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Drive motor: 18.5 kW Drive motor speed: 1,500 rpm Dimensions & Weight Nwsdsy R N I Espfx Akujg Dimensions with control cabinet (L x W): 3,850 x 1,510 mm Length with bar feeder: 6,453 mm Machine weight: 8,300 kg Space required for packed machine: 15 m³ EQUIPMENT Collets Toolholders Additional accessories

Condition: used, Year of construction: 2017, INDEX C200 Mfd. 2017 Tooling in photos to be divided between 3 C200 machines available. Power-on hours: ~49,960 h Hydraulic hours: ~48,700 h Main spindle hours: ~24,800 h Counter spindle hours: ~24,000 h Stroke mm 20 Clamping pressure min.Max. bar 8/80 Piston Area pressure cm^2 57 Area piston thrust cm^2 57 pressure Force Max. CN 45,6 Tensile force Max. CN 45,6 10350989 1 INDEX C200 CNC-turning machine with 3 revolvers with Siemens-Based Index C200 control system SINUMERIK 840D SolutionLine - Rigid cast iron bed, perpendicular angle to the ground, excellent gradient chips - The kinematics of tool head movements guarantees maximum damping, reducing tool wear - Patented plate supports with excellent properties damping and stiffness The motion of the X-axis is derived through kinematics. "double scissors" guaranteeing high dynamics - Thermosymmetric spindle Control system Index C200 Identical to SIEMENS SINUMERIK 840d SolutionLine - Modular multiprocessor control system, SINAMICS with 120 drives - Siemens Operate control box, display in language Germany - language switching WINDOWS and flat screen - 2x USB 2.0 connection on the control panel, 2x USB connection on the control panel - NCU 720.3 B PN NCK - Integrated PLC 317-3 PNDP and ET200S - Security features implemented in software through SIEMENS Safety-Integrated and ProfiSave Extended machining cycles consisting of: Einstechzyklus Freistechzyklus Gewindestrehlen with 4 point move Lighting work. space in LED design 1 flat color TFT screen, 18.5" PCT-Touch IP65 front panel 10142338 1 Main spindle dia 65 Spindle end AD140mm, ID 85mm Material passage Max. mm 65 Speed max. 1 / min 5000 Front bearing diameter mm 110 Power 100% / 40% kW 31,5/32 Torque Max. 100%/40% Nm 125/170 Continuously synchronous variable speed drives Main spindle with hollow clamping cylinder D65/20 for pincer clamping or Chuck clamping Hydraulic control with clamp metering C axis of main spindle Drive: hollow spindle motor clamping cylinder, metering system directly on the spindle Resolution 0.00014 degrees Positionsstreubreite (VDI/DGQ 3441) Psmax = 0.01 degree 11040430 pressure clamping device Clamping pressure 8-75 bar adjustable For anti-spindle clamping cylinder 10038475 1 tool carrier 1 X-axis work vehicle mm Nwjdey Um Rrjpfx Akusg 110 X-axis quick shift m / min 30 X-axis acceleration m / s^2 9 X-axis shear force N 5000 Z-axis work vehicle mm 320 Z-axis quick feed m / min 50 Z-axis acceleration m / s^2 9 Z-axis shear force N 5000 Y-axis working vehicle mm 100 Y-axis quick feed m / min 15 Y-axis acceleration m / s^2 9 Y-axis shear force N 5000 Offer: 1702114 - 02 / 30.3.2017 CNC-lathe INDEX C200 (GP3790. 0000F) Revolver 1: 14 stations with cylindrical shank clamping D25x48 (DIN 69880), W-grooves on the revolver-higher repeated accuracy when replacing the tool. Centering plate set, V-strips, not content of delivery, must be ordered separately. Gearshift revolver AC motor, hydraulic locking A driven tool is possible in each station of the revolver 1 . Power 25% kW 10 Torque 25% Nm 16 Speed max. 1 / min 8000 10720950 1 tool carrier 2 X-axis working vehicle mm 110 X-axis quick shift m / min 30 X-axis acceleration m / s^2 9 X-axis shear force N 5000

Condition: like new (used), Year of construction: 2020, operating hours: 360 h, functionality: fully functional, FOR SALE! SET OF 2 PROFESSIONAL PNEUMATIC MACHINES FOR STRETCHING CANVAS AND TARPAULIN Maximize delivery times and quality in your advertising workshop, printing company, or picture frame factory. This equipment fully automates the mounting and stretching process on frames, dramatically reducing staff fatigue and ensuring perfect and uniform finishes in seconds. WHAT DOES THE OFFER INCLUDE? The listed price is for the complete set of two essential pieces for the most common formats on the market: 1 Stretching Machine, 1.20 meters. 1 Stretching Machine, 1.60 meters. TECHNICAL AND OPERATIONAL CHARACTERISTICS: Model: JS8020. Pneumatic Operation: Continuous operation with high precision (requires connection to a standard compressor). Adjustable Pressure (F.R.L. System): Integrated filter, regulator, and lubricator to control the exact stretching force according to the material thickness, preventing tears or damage to the canvas/tarpaulin. Professional Results: Achieves uniform tension across the entire surface, eliminating wrinkles quickly and without manual effort. Robust Structure: High-strength metal chassis designed for heavy-duty workshop use. SALES CONDITIONS: Nwsdpfxsy Tcnwo Akusg Condition: Used / Excellent condition (Ready for immediate operation).

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Bodor, laser type: fiber laser, laser source manufacturer: Bodor, laser power: 12,000 W, warranty duration: 60 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Nodpfjhwhf Asx Akuewg Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: good (used), Year of construction: 2015, machine/vehicle number: 190630, turning length: 150 mm, turning diameter: 200 mm, spindle bore: 42 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 150 mm, travel distance Z-axis: 155 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, turning diameter over bed slide: 220 mm, overall weight: 5,000 kg, spindle nose: 140 Flat, bar diameter (max.): 51 mm, power: 0.015 kW (0.02 HP), The innovative front-facing spindle of the 2SP-150H helps create an automation-friendly lathe for small parts production. By moving the spindle off the side and incorporating the Okuma Gantry Loader (OGL) into the production line, parts can be loaded and unloaded automatically. An extremely compact footprint improves floor space utilization, while the popular dual spindle option significantly reduces cycle time. Nsdpfx Aertrlzskuewg Equipped with: Okuma OSP-P300L CNC Control 8" 3-Jaw Chuck Expanding Mandrel Turret Tooling Gantry Loader Pendant Controller Chip Auger Stack Light