Used Hgg Spc 330 for sale (1,978)

Year of construction: 2004, condition: ready for operation (used), Max. web width: 330 mm Min. / max. paper weight: 90 – 160 g/m² Itsdpfx Anoy Shz Heyek Max. unwind roll diameter: 700 mm Max. rewind roll diameter: 400 mm Core diameter: Unwind: 76 mm / Rewind: 76 mm Max. speed: 230 m/min Description: Unwind unit, splicing table with clamping device, web guiding and web tension control (including automatic web fixing during stop operation), single punching station (no tools included) with rewind for the punching grid, up to 12 slitting knives in a cutting unit with separators for slitting and/or longitudinal cutting of the rolls, extended operator panel for settings, counter (labels or meters) as well as inspection control (missing label detection) with visual check, 2 driven rewind shafts for fast and efficient production. All safety devices are installed on the machine.

Condition: ready for operation (used), Year of construction: 2007, Main motor (kW): 27 Infeed system Saw length (mm): 3300 Ijdjzgwpgopfx Anyjtk Saw width (mm): 2200 Panel thickness (mm): 40 All specifications are provided by the manufacturer.

Condition: good (used), mileage: 530,000 km, power: 345.68 kW (469.99 HP), first registration: 07/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, fuel: diesel, fuel tank capacity: 960 l, color: white, driver cabin: sleeper cab, gearing type: automatic, suspension: air, number of beds: 2, Year of construction: 2021, Equipment: ABS, air conditioning, blind spot assist, central locking, cruise control, differential lock, electronic stability program (ESP), fridge, full service history, lane keeping assist, parking heater, power assisted steering, retarder, seat heater, traction control, Vehicle purchased and serviced at an authorized MAN service center, one owner, purchased in Poland, complete documentation and service history New-generation tachograph New tires Ready for work Itjdpfx Anjzvgdroyok Specifications: – 07.2021 – Transmission: Automatic – Mileage: 530,000 km – Power: 470 km – Euro 6 Truck is equipped with: GM cab retarder front/rear air suspension 2 beds webasto air conditioning refrigerator LED headlights with cornering lights pneumatic driver and passenger seats heated driver’s seat adaptive cruise control lane departure warning hill start assist eco roll differential lock If you have any questions, feel free to contact us by phone or WhatsApp The vehicle is available for viewing at our lot in Krakow. Please contact us before visiting to confirm availability and schedule a viewing. We can send additional photos and videos of the vehicle. Additionally, we offer: Export plates and insurance Transport to any location within the EU, Ask the seller for details.

Condition: excellent (used), Year of construction: 2004, Engel Victory 330/110 Tech / production line with robot Engel ER-HLI 41 and conveyor belt / machine in very good technical condition Year of manufacture: 2004 Injection unit: Screw diameter: 40 mm injection weight: 190 g Injection pressure: 1670 bar Iedozc Nykspfx Anyetk Metering volume: 201 ccm Clamping unit: clamping force: 110 t tie bar distance: 0x0 mm size of clamping platens: 790x680 mm ejector: hydraulic clamping unit: hydraulic Control system: CC 100 Additional equipment: Production line with integrated robot Engel ER-HLI 41 and conveyor belt. Tie-bar-less machine Hydraulic core puller x 1 Injection unit hardened - bimetal Machine serviced by authorized service Engel Machine with original protective housing to the robot and conveyor belt Dimensions: Weight: 7400 kg Length/width/height: 5.10x1.50x2.10 m Drive: Pumps/motor: 18.5 kW Heating power: 9,2 kW Total power: 27,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, mileage: 148,900 km, power: 243 kW (330.39 HP), first registration: 03/2015, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, all wheel drive, crane, soot filter, Iveco Trakker 330 4x4, Meiller 3-way tipper Crane: Hiab 088 B2 HiDuo with 2x hydraulic outriggers + grab + swivel head + remote control Mounting plate Manual transmission, air conditioning, 2x trailer coupling, EURO 6, external sun visor, rotating beacons, engine brake, differential locks, remote control, radio/CD, rotating beacons, ABS. Payload: 6,550 kg Iodozkdf Aepfx Anyetk

Condition: used, mileage: 148,900 km, power: 243 kW (330.39 HP), first registration: 03/2015, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, all wheel drive, crane, soot filter, Iveco Trakker 330 4x4 Meiller three-sided tipper Crane: Hiab 088 B2 HiDuo with 2x hydraulic extensions + grapple + rotator + remote control. Mounting plate. Manual transmission, air conditioning, 2x trailer coupling, EURO 6, external sun visor, rotating beacons, engine brake, differential locks, remote control, radio CD, rotating beacons, ABS. Itedpfxozkdgge Anyok Payload: 6,550 kg.

Condition: excellent (used), Year of construction: 2017, volume flow: 5,500 m³/h, RENNER OM-COMD 330 desiccant dryer Itjdszkwagopfx Anysk Capacity: 5.5 m³/min Year of manufacture: 2017

Condition: used, Cooling/freezing chamber Viessmann Isdpfx Ansxqpgrsyotk -External dimensions: 3300 x 2100 x 2450 mm -Internal dimensions: 3100 x 1900 x 2250 mm -Plate thickness: 100 mm -Door clearance: 800 mm -Stainless steel floor -Cooling/Freezing unit in set -Stock quantity: 1 -The chamber is easy to assemble

Condition: used, Year of construction: 1980, operating hours: 8,840 h, lifting height: 3,230 mm, fuel type: diesel, mast type: duplex, fork length: 2,190 mm, fork width: 2,280 mm, total height: 3,560 mm, total length: 5,070 mm, total width: 2,560 mm, color: blue, Empty weight: 17.000 kg Lifting capacity: 15.000 kg - Year: 1980 - Documentation available: Yes - CE certificate present: No - Serial number: B6Y 01146 - Operating hours: 8840 - Lifting capacity: 15000kg - Lifting height: 3230mm - Overhead clearance: 3560mm - Free lift: 0mm - Fork length: 2190mm Itsdpfx Aey N Ubusnyek - Maximum fork width: 2280mm - Minimum fork width: 440mm - Number of wheels: 6 Wheels - Attachment: Side-shift - Options: Work lights, Half cabin - Mast: Duplex - Drive: Diesel - Motor brand: 3208 CAT - Transport dimensions: 5070mm x 2560mm x 3560mm (l x w x h) - Transport weight [kg]: 17000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 380 mm, total height: 2,680 mm, total length: 2,700 mm, total width: 1,900 mm, overall weight: 2,100 kg, type of input current: three-phase, feed length W-axis: 300 mm, power: 6 kW (8.16 HP), drill diameter: 6 mm, Equipment: documentation/manual, Topedm TSH-400T CNC CNC electro-discharge drilling machine with electrode changer and guide changer Year of manufacture: 2007 Includes guides, collets, and various spare parts Operates with brass electrodes Automatic electrode changer Automatic, patented guide changer Predefined machining parameters Itjdpsztyxdjfx Anysk Repeatability: 0.01 mm Burr-free drilling Automatic electrode wear compensation enables precise blind hole drilling Full water bath machine Water treatment unit Deionized water as dielectric, no additives required Deionization, large filters Water chiller Additional flushing at the guide Technical data Max. travel (X x Y x Z): 400 x 400 x 380 mm Table size: 480 x 458 mm Electrode diameter: 0.15 to 6.0 mm Maximum distance head / table: 315 mm Machine head movement (W-axis): 300 mm Repeatability: ± 0.01 mm Number of positions in automatic electrode changer: 21 Maximum working current: 50 A Automatic guide changer: 5 guides Fillable working tank Working tank size (L x W x H): 670 x 930 x 330 mm Power consumption: 6 kW Footprint (L x W x H): 2700 x 1900 x 2680 mm Weight: 2100 kg Optionally, more than 1000 multi-channel brass electrodes, 0.3 to 6 mm, are in stock and can be sold at a favorable price. The machine is in good condition and can be tested under power. Inspection is possible during our business hours or by appointment. The sale is due to upcoming retirement.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 715 h, controller manufacturer: SIEMENS, laser power: 3,000 W, punching force: 18 t, sheet thickness (max.): 6 mm, overall weight: 18,500 kg, total width: 9,945 mm, total height: 2,500 mm, product length (max.): 8,862 mm, number of axes: 3, This 3-axis TRUMPF TruMatic 6000-1600 fiber was manufactured in 2022. It features a maximum laser power of 3,000 W and a punching force of 180 kN, with a maximum punching frequency of 917 strokes/min. The machine has a large working area, allowing for combined punching and laser processing. If you are looking to get high-quality punching and laser cutting capabilities, consider the TRUMPF TruMatic 6000-1600 fiber machine we have for sale. Contact us for further details. • Laser source: TruDisk 3001 solid-state laser, 3,000 W, fiber-optic beam delivery (10 m), compact cutting head, anti-collision, protective glass, closed beam guidance, programmable cutting gas pressure • Control/OS/Interface: Rexroth IndraMotion MTX CMP70; Windows Embedded; 17-inch touchscreen; 4 GB program memory; 320 GB HDD; USB; RJ45 10/100 Mbit/s; Internet teleservice; integrated technology database; NC program management; production planning; automatic machine shutdown; network connection for programming/production systems • Working area: • Punching (no reposition): 3,050 x 1,550 mm • Laser cutting (no reposition): 3,050 x 1,550 mm • Combined (no reposition): 2,500 x 1,550 mm • Combined (with reposition): 3,050 x 1,550 mm • Max sheet thickness: 6.4 mm; Max workpiece weight: 230 kg • Max part size via flaps: 500 x 500 mm (laser) / 500 x 500 mm (punching); via chute: 80 x 50 mm • Axes/performance: • Drives: Maintenance-free AC servo motors (X/Y/C); electrohydraulic punching head • Max speeds: X 90 m/min; Y 90 m/min; simultaneous 108 m/min; C-axis 330 rpm (punching/thread forming) • Frequencies: Max punching at E=1 mm: 917 strokes/min; marking: 2,800 strokes/min • Accuracy: Pa ±0.1 mm; Ps ±0.03 mm; min increment 0.001 mm • Punching unit: • Force: 180 kN; electrohydraulic head; rotary single-station tool holder • Tool circumferences: punching 76.2 mm; forming 101.6 mm; optional 110 mm • Change times: basic 3.2 s; MultiTool 0.3 s • Magazine: 25 linear positions; standard 22 tools; up to 220 with MultiTool • Clamps: 3 hydraulic; fully rotatable tools; programmable blank-holder; tool length compensation; punch lubrication; chip extraction with automatic tube emptying and fill-level estimation; stroke counter; tool lubricant level monitoring; WhisperTools compatible • Forming/punching functions: • MultiTool; MultiBend; thread forming (M2.5–M10); surface marking/embossing; vertically movable clamps • Max MultiBend: width 55 mm; height incl. material 25 mm; angle up to 90° • Automatic thread-forming lubrication; thread counter • Laser cutting capability (max thickness): • Mild/structural steel: up to 6 mm (O2 or N2) • Stainless steel: up to 6 mm (N2) • Aluminum: up to 5 mm (N2) • Laser functions: NitroLine; FocusLine; FastLine; FlyLine; ControlLine; slug detection; ejector cylinder for laser-cut parts; laser event log; automatic cutting-head height adjustment Itodpfx Aszul Dzenysk • Standard machine equipment and safety: • Rigid C-shaped welded frame; coordinate guide system; linear tool magazine • 3 hydraulic clamps; programmable repositioning; foot switch for clamp closing • Radiation protection at cutting head; two 500 x 500 mm part flaps with sensors • Ball tables; two finished-part containers; chip container • Compact dust extraction and filtration unit • Water-air cooling unit (machine and laser) • Initial hydraulic oil filling • Two-level safety light curtains; fast drive shutdown; protection against scattered laser radiation

Condition: good (used), Year of construction: 1999, functionality: fully functional, MPS EP 330-5 Year of manufacture: 1999 Machine configuration: • 5 flexographic printing units • Laminating unit • Die-cutting unit • Sheeter unit • Web width: 330 mm • Inline printing and converting process • Suitable for paper and label-related converting applications Application and Advantages The MPS EP is a compact and versatile flexographic printing and converting machine. With integrated laminating, die-cutting, and sheeting units, this machine enables the processing of roll materials into individual sheets or pieces in a single workflow. Possible applications: • Paper converting • Roll-to-sheet production • Roll-to-piece production Iedpjy N Tk Usfx Anystk • Flexographic printing • Laminating • Die-cutting • Sheet delivery after converting • Inline production of printed and finished products Main benefits: • Printing, laminating, die-cutting, and sheeting in one production line • Reduced handling compared to separate offline processes • Flexible use for various converting applications • Attractive solution for customers seeking a compact machine with inline finishing • MPS is a reputable manufacturer in the label and narrow-web printing sector

Condition: excellent (used), Year of construction: 2007, Engel Victory 330/60 TECH Injection Moulding Machine Itedpfxjxwvias Anyek Year of manufacture: 2007 Clamping unit: Clamping force: 600 kN Platen dimensions (table): 720 mm Mould height: 600 mm Opening stroke: 900 mm Ejector stroke: 115 mm Ejector force: 125 mm Injection unit: Screw diameter: 35 mm Shot volume: 154 cm³ Injection pressure: 2,400 bar Machine weight: 5,300 kg

Condition: like new (used), Year of construction: 2023, operating hours: 10 h, functionality: fully functional, Automatic slicing machine CHANTALAT-PROCESS with conveyor – Very little use. Professional, fully automatic slicing machine CHANTALAT-PROCESS, purchased new in 2023. The machine was used only for a few tests and never used in production because it ultimately did not meet our requirements. Very good overall condition. Casters have been added to the base to facilitate the movement of the machine. Technical specifications: Stainless steel construction Vertical blade Ø 330 mm Automatic horizontal carriage Output conveyor Stacking, aligning, and offsetting device for slices Cycle rate: approximately 25 to 55 movements/minute 99 programmable slicing programs Slice thickness: 0 to 10 mm Maximum stacking height: 80 mm Cutting length: 255 mm Cutting height: 195 mm Carriage dimensions: 275 × 360 mm Conveyor dimensions: 880 × 280 mm Electrical power: 0.6 kW Power supply: three-phase 400 V – 50 Hz – 3P+N+T Noise level: less than 70 dBA Dimensions: approximately 1270 × 853 × 1330 mm Weight: approximately 130 kg New price in 2023: €24,284 excluding VAT. Iodpfsztz Nqjx Anyetk Documentation available. Machine available immediately. Price: €15,000 excluding VAT, negotiable. Available for viewing by appointment. Additional information and photos available upon request.

Year of construction: 2005, condition: used, We offer an ELS industrial labelling system, type 330, manufactured in 2005, designed for automatic labelling of food products, retail packaging and trays. The machine is ideal for meat processing plants, food processing plants, dairies and anywhere else where fast, repeatable and precise label application is required on the packaging line. The ELS 330 labelling system operates at 230 V, 50/60 Hz, 2500 VA and achieves a capacity of up to 2800 pcs/min at a belt speed of 0.5 m/s. The labeller supports labels up to 300 mm wide, allowing the use of both small product labels and larger marketing or logistics labels. Its compact dimensions of 2300 x 1000 x 1700 mm make it easy to integrate the device into an existing packaging line. Availability: 4 pcs ELS Labeling System 330 Technical data: Manufacturer: ELS Type: 330 Machine no.: 5383/2005 Isdpfx Aex Aq Stonystk Year of manufacture: 2005 Power supply: 230 V, 50/60 Hz Power: 2500 VA Capacity: up to 2800 pcs/min Belt speed: 0.5 m/s Maximum label width: up to 300 mm Dimensions: 2300 x 1000 x 1700 mm The ELS 330 labelling system is a reliable, used labelling machine that allows you to increase the automation of the packaging process, improve the appearance of packaging and ensure consistent product identification throughout the supply chain. We currently have 4 ELS 330 labelling systems in stock, available immediately.

Condition: used, mileage: 965,000 km, power: 243 kW (330.39 HP), first registration: 12/2016, fuel type: diesel, tire size: 255/70R22.5, tire condition: 40 %, axle configuration: 6x2, wheelbase: 6,450 mm, fuel: diesel, fuel tank capacity: 600 l, color: red, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, total length: 9,920 mm, total width: 2,550 mm, total height: 4,000 mm, loading space length: 7,850 mm, loading space width: 2,500 mm, loading space height: 2,800 mm, Year of construction: 2016, Equipment: ABS, air conditioning, cruise control, = Additional options and accessories = - Radio/CD = Further information = General information Cab: Day cab Technical information Number of cylinders: 6 Axle configuration Front axle: Tire size: 255/70R22.5; Tire tread: 40%; Reduction: single reduction; Suspension: leaf spring suspension Rear axle 1: Tire size: 275/70R22.5; Tire tread: 60%; Reduction: single reduction; Suspension: air suspension Rear axle 2: Tire size: 285/70R19.5; Tire tread: 30%; Reduction: single reduction; Suspension: air suspension Weights Unladen weight: 10,470 kg Itodpfezuvhdex Anyek Payload: 17,530 kg GVWR: 28,000 kg Functional Body brand: OTHER Condition Damage: none = Company information = Heisterkamp Used Trucks BV doesn’t just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are ready for immediate use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today’s requirements, and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Telephone: - E-mail: - Website:

Condition: good (used), Year of construction: 2007, operating hours: 68,651 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, displacement volume: 154 cm³, Equipment: documentation/manual, ENGEL Victory 330-120 Tech Stock no.: 503558 Manufacturer: ENGEL Model: Victory 330-120 Tech Control system: CC100 Year of manufacture: 2007 Operating hours: 68,651 h Technical Data – Clamping Unit Clamping force: 1,200 kN Platen size (H x V): 740 x 680 mm Minimum mould height: 300 mm Maximum daylight: 800 mm Opening stroke: 500 mm Ejector stroke: 130 mm Ejector force: 40 kN Movable platen centring diameter: 125 mm Fixed platen centring diameter: 125 mm Mould weight: 825 kg Technical Data – Injection Unit Screw diameter: 35 mm Shot volume: 154 ccm Injection pressure: 1,600 bar Screw L/D ratio: 20 l/d Screw stroke: 160 mm Screw speed: 400 rpm Free injection flow: 151 g/s PS Number of heating zones: 4 Nozzle stroke: 250 mm Dimensions & Weight Machine dimensions (L x W x H): 4.5 m x 2.1 m x 2.1 m Total weight: 7,300 kg Equipment Screen text in German CEE socket 16A Hydraulic core pull, 2x Machine including conveyor belt Machine including safety enclosure Machine without material hopper Levelling elements Interface for ejector plate safety Schuko socket 10A Technical Data – Handling Machine type: Linear Brand: ENGEL Iodpfx Aeytfgnsnyotk Control system: ER-HLI41VC Year of manufacture: 2007

Condition: good (used), Year of construction: 2007, machine/vehicle number: 22428.07, Offer 22252 Technical Data: - Cutting range at 90° round + square: 330 mm - flat: 600 x 320 mm Itjdpfxewn Dy Ds Anyok - Mitre adjustable left / right: 30 / 45° - Cutting range at 45° right + left round: 320 mm flat: 350 x 320 mm - Material support height: approx. 920 mm - Saw band dimensions: 4440 x 34 x 1.1 mm - Cutting speed steplessly adjustable: 10 to 100 m/min - Hydraulic lifting – lowering of the saw frame - Upper lift limitation of the saw frame - Cutting pressure steplessly adjustable: 0 - 10 m/min - Hydraulic material clamping vice - Cooling device - Total drive power: 400 V / 2.2 kW - Required space: approx. W 1400 x H 1400 x D 2400 mm - Weight: approx. 1000 kg

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, turning diameter over cross slide: 3,300 mm, turning diameter: 3,300 mm, spindle speed (max.): 92 rpm, spindle speed (min.): 92 rpm, travel distance X-axis: 2,000 mm, travel distance Z-axis: 1,200 mm, spindle motor power: 60,000 W, rapid traverse Z-axis: 6 m/min, rotational speed (min.): 92 rpm, rotational speed (max.): 92 rpm, total height: 2,330 mm, total width: 6,282 mm, feed length Z-axis: 1,200 mm, workpiece weight (max.): 35,000 kg, overall weight: 50,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, CNC vertical lathe SC 33 CNC MS Year of manufacture: 1995 Condition: used, fully functional Technical specifications: Maximum turning diameter: 3300 mm Maximum workpiece height: 2300 mm CNC control system Condition: functional, live Video available on request. *The machine is in very good condition, fully functional, live and available for inspection and testing. Itedoyzgtmepfx Anyjk

Condition: good (used), Year of construction: 1988, functionality: fully functional, Double mitre saw DG79 Itodpfsygm Akjx Anysk - 2 x 2 kW - 380 Volt - Year of manufacture: 1988 - 2100 / 3800 rpm - Saw blade 330 mm Ø - Cutting area at 90°: 195 x 90 mm; at 45°: 135 x 90 mm - Minimum cutting length 500 mm, maximum approx. 3300 mm - Compressed air 6-8 bar / 250 l/min - Weight: approx. 500 kg - Pneumatic clamping device Transport available at extra cost! Due to the age of the used machine, warranty is excluded for commercial customers.

Condition: repair required (used), Injection moulding machine, Engel ES 330/85, Used machine As shown in the pictures, its working condition is uncertain. Overall dimensions :3100 x 1950 x 2600 mm Weight: 5500 kg Itedpfx Anjukn S Hoyek Manufacturer: Engel Type: ES 330/85 Year of manufacture: 1997 Electrical data: 380V, 60 A, Contoller cards: Keba PS 244; Keba DO 321; Keba DO 321; Keba DO 321; Keba DI 325; Keba DI 325; Keba DI 325; Keba TT 081; Keba AR 181; Keba PD 242; Keba CU 211

Condition: used, Year of construction: 2015, operating hours: 3,944 h, Equipment: ABS, Top-condition Mercedes Benz Actros 1830 with Ruthmann T 330 HV 12 aerial work platform, 33 m working height, 320 kg load capacity or up to 3 persons, 20.70 m lateral outreach, with minimal stabilization, 1,000 V insulation possible, box body 1.60 m x 2.38 m x 1.10 m, lift and swivel lock, large aluminum work basket, newly UVV-inspected and serviced by Ruthmann, and much more. Platform Data Ruthmann T 330 HV 12 aerial work platform Max. working height: approx. 33 m (manufacturer spec) 4-fold hydraulic outriggers Minimal stabilization 20.70 m lateral outreach Load capacity: 320 kg or 3 persons Basket dimensions: 1.71 m (L) x 0.85 m (W) x 1.10 m (H) with power socket Insulation according to DIN VDE 0682-742 up to 1,000 V with fiberglass (GRP) work basket possible Permitted wind speed: 12.5 m/s Lateral force: 400 N Slew and swivel range: 2 x 250° 15° lift and 20° swivel lock Emergency controls on subframe Special boom lock prepared for subsequent installation of underrun protection at rear Quick-change system for fast replacement of work platforms Large tool storage box at rear of loading area, dimensions: 1.60 m x 2.38 m x 1.10 m, with side shutters 4 non-slip U-plates with holders Work platform spotlight 3,944 operating hours (according to meter) Platform UVV certificate newly issued by Ruthmann (09/2025) Ruthmann service newly carried out (09/2025) Registered as self-propelled work equipment (tax-exempt) Very well-maintained condition Truck Data First registration: 08.04.2015 Mileage: 108,250 km Cab: M CompactSpace with rear window Wheelbase: 4,200 mm Engine: OM936, inline 6-cylinder, 220 kW (299 hp), 1,200 Nm Euro VI engine version Drive: 4x2 Automatic transmission: Mercedes Benz PowerShift 3, G 140-8/9.30-0.79 Air conditioning Front and rear axles with leaf suspension Weight variant: 18.0 t (8.0/11.5) Front axle: 8.0 t, rear axle: 13.4 t planetary with 300 mm ring gear Front springs: 8.0 t, 3-leaf; rear springs: 11.5 t, heavy-duty HY axle ratio: i = 4.833 Disc brakes front and rear Electronic brake system with ABS and ASR Cruise control Stability assist Stabilizers front and rear Reversing camera Navigation system LED daytime running lights LED warning light bar on cab roof 2 additional flashers at the front of cab roof Air horn on cab 290-liter tank Comfort driver's air-suspension seat Very good and well-maintained condition Itedpfxsyi N Ste Anyjk TÜV (MOT/roadworthiness) valid until 10/2025 Registered as self-propelled work equipment (tax-exempt) Price NET plus 19% VAT. Attractive financing options available on request. All information provided without guarantee. Subject to errors and prior sale. Internal vehicle number: 2567

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, power: 4.4 kW (5.98 HP), cutting height (max.): 6,000 mm, saw blade diameter: 500 mm, tilt adjustment saw blade: 90 °, rotational speed (max.): 2,800 rpm, On sale Pertici saw that is no more required. wo headed automatic saw for cutting aluminium profiles. Saw blade diameter: 500 mm Max cutting lenght: 6000mm Min cutting lenght: cca 330 mm Engine power: two three-phase motors, each one 2,2 kW (summary4,4 kW), 2800 rpm Head tilt: 90-45° Year of production : 2016 Ijdpfeztc Dcjx Anyetk Price: 9300€ The machine can be seen in Rugvica, Croatia (nearby Zagreb).

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Suitable for cutting aluminum as well. However, up to now, it has mainly been used to cut plastic and wood materials. Iedpfx Anoy T Sxfoyotk Maximum panel width: 4300 mm Cutting depth: 3300 mm Main blade overhang: 135 mm Scoring unit, blade diameter 200 mm Pushing carriage with 11 clamps 1 fixed front table with air cushion 2 mobile front tables with air cushion Total power: 37 kW Manuals in printed format Availability: October 2026

Condition: excellent (used), Year of construction: 2012, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: P128YH003, travel distance X-axis: 710 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, nominal power (apparent): 12 kVA, controller model: Fanuc 31i-B5, rotational speed (max.): 10,000 rpm, overall weight: 2,100 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 12,000 h, number of spindles: 1, number of slots in tool magazine: 21, mount diameter: 40 mm, input voltage: 250 V, type of input current: three-phase, Equipment: CE marking, USB port, documentation/manual, type plate available, 4-axis CNC milling machine, original DDR rotary table, 21 tools, reinforced spindle 10,000 rpm, Fanuc 31i-B5m controller, table travel 700 x 400 x 330 mm Itjdpfx Ajw T S Nienyek