Used Himmel Quill Machining Unit for sale (95,287)

Condition: used, for Ferrari rotary mowers 530, 535 HY, 580 HY, 530 S, 530 S PS, 560 HY Itodpfxjz Uuqvs Ag Aen for Ferrari single-axle tractors 338, 340, 360, 370 HY, 380 HY

Condition: used, for Ferrari rotary mowers 514, 515, 518, 530, 535 HY, 580 HY Iedpfx Agez Tvc Rs Ajtn for Ferrari single-wheel tractors 328, 338, 340, 370 HY, 380 HY APPLICATION Clearing snow and cleaning roads, sidewalks, parking lots or stables. TECHNICAL DATA - Required minimum power*: 6.3 kW - Gearbox ratio: drive via gears in an oil bath and   cast housing - Brush: bristles made of nylon or nylon/steel (only for the model   with 100 cm) - Can be pivoted sideways from the driver's seat - Sweeping height adjustable

Condition: used, For Ferrari rotary mowers 514, 515, 518, 530, 535 HY, 580 HY, 530 S, 530 S PS, 560 HY For Ferrari single-wheel tractors 328, 338, 340, 360, 370 HY, 380 HY USE Specialized equipment for general cleaning of driveways, sidewalks, parking areas, and stables. Or for superficial snow removal. TECHNICAL DATA - Required minimum power*: 6.3 kW - Gear ratio: drive via gears in an oil bath and cast housing - Brush: bristles made of nylon - Can be pivoted sideways from the operator's station Itodpfsz Upxbox Ag Asn - Sweeping height adjustable

Year of construction: 1994, condition: used, Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor, saw unit, milling unit saw unit -Manufacturer: Paul OTT, saw unit from edge banding machine U 206 -Engines: Type K 14 -Power: 0.8 kW / 200 Hz Iedpfx Aou Rv Ttsg Aotn -Speed: 1200 rpm -Saw blade: Ø 140 mm -Saw blade spacing: 515 to 1070 mm -Dimensions: 530/490/H600 mm -Weight: 78 kg

Condition: used, Year of construction: 2000, functionality: unexamined, machine/vehicle number: EE425200, paper weight (max.): 400 g/m², paper width (max.): 720 mm, paper height (max.): 520 mm, input voltage: 380 V, Purchased in working condition and transferred to our warehouse. It is currently not in working condition. Ink and water rollers need to be replaced soon. Simultaneous front and back printing is possible. Very suitable for book printing. Iodpsy Emmzefx Ag Ajtn

Condition: used, CNC path control, computer, control unit, logic unit Heidenhain Type TNC 415 B / LE 415 B Logic unit LE 415 B, year of manufacture 1999 Itedpfezfqb Tjx Ag Asn Item number: 267 223 49 Serial number: 5 667 843 S5 PC serial number: 252 415 01 NC serial number: 259 930-12 Installed modules: - Computer board Type S4, item number: 268 553 01 / serial number: 5 615 221 - PLC graphics Type S3, item number: 257 954 03 / serial number: 5 556 573 A - Control loop board Type G3, item number: 275 705 02 / serial number: 20 232 905 C - Power supply, item number: 236 484 10, serial number: 5 600 157 / S4 - LE 415 B neutral, item number: 267 223 CC / serial number: 5 618 369 / S4 Housing dimensions L x W x H: 510 x 190 x 415 mm Weight: 11 kg Very good condition - functional guarantee

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Itodpfxou Tln No Ag Aen Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: ready for operation (used), functionality: fully functional, Gang drilling machine with 4 units, gear transmission, and feed. One unit equipped with a thread cutting device. Tool holder MK 4. Itodpjx S U Uyefx Ag Aon

Condition: excellent (used), Year of construction: 1996, I sell the widebelt sanding machine OTT MEGA TR11, year 1996. Configuration: Hard rubber calibrationcylinder Combi unit rubber cylinder + pneumatic jumping pad with segment control. Working width 1100mm Elektronic working height adjustment with digital readout 3-160mm 1 Motor 11kW 2 Feeding speeds. Sensitive adjustment of pad position. Pneumatic adjustment of pad and cylinders pressure position. Condition LIKE NEW ! The machine was working only a few. Isdpfx Aeywrzbjg Ajtn Available immediately.

Condition: new, Technical specifications: Number of rollers: 4 Roller size: 120 x 60 mm Number of speeds: 4 Feed speed: 4-8-11-22 m/min Itsdozvm Rropfx Ag Ajn Max. stroke: 20 mm Distance between rollers: 133-143-145 mm Distance between the first and last roller: 421 mm Motor power: 0.75 kW Motor speed: 1400/2800 rpm.

Condition: used, Technical specifications: Itedpfjzvm Rfox Ag Ajn Number of rollers: 3 Roller size: 120 x 60 mm Maximum stroke: 20 mm Number of speeds: 8 Distance between the first and last roller: 286 mm Distance between rollers: 133-153 mm Motor power: 0.75 kW Motor speed: 1400/2800 rpm Feed rate: 2-4-5.5-6.5-11-13-16.5-33 m/min.

Condition: used, MF welding machine with water-cooled projection welding head Medium-frequency projection welding head Manufacturer: TECNA (Italy) Model 3670 E CF00 Serial No.: Year of manufacture 2014 Rated welding power 25 kVA Max. welding power 160 kVA Mains connection 400 Volt, 50 Hz - Welding control TE750 or TE760 - Projection welding head for single-sided spot welding - Ideal for repair work in the bodywork area, ensuring the best welding quality - Water-cooled, type 2BHPLN - Mobile transport trolley Weight approx. 155 kg Very good condition - like new Iedeg U A Uzjpfx Ag Aetn

Year of construction: 1994, condition: used, Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor -Manufacturer: Paul OTT, milling unit from edge banding machine U 206 -Milling motors: Type HF 08.2 -Power: 0.6 kW / 200 Hz -Speed: 1200 rpm -Adjustment ranges: see photos Iodpou Rv Rxjfx Ag Aetn -Number: 2x milling unit available -Price: per piece -Dimensions: 530/490/H600 mm -Weight: 67 kg/piece

Condition: used, CNC oxy-fuel cutting system BACH, type ACW 2500 Oxy-fuel cutting machine with CNC control NBS 400 Machine no. 14 561-06, year of manufacture 2006 Cutting area: 2500 x 6500 mm Travel length: 8000 mm Track gauge: 3345 mm Height of travel: 650 mm 2x machine cutting torches Itjdpfx Aef Ncadjg Aon with cutting table (2-part)

Condition: new, Technical specifications: Number of rollers: 6 Itedpfjzvm Siex Ag Aon Roller size: 120x60 mm Maximum feed: 20 mm Number of speeds: 8 Feed speed: 2-4-5.5-6.5-11-13-16.5-33 m/min Distance between rollers: 133-154-133-133-133 mm Distance between the first and last roller: 686 mm Motor speed: 1400/2800 rpm Motor power: 0.75 kW

Condition: used, Year of construction: 2012, Softforming edge banding machine with panel cutting device Manufacturer: Elwood Year of manufacture: 2012 Itsdpjzuyi Sjfx Ag Aen Technical data: - Adhesive application system with slotted nozzle - Compatible with EVA and PUR adhesives - Meler adhesive melting and application system - Electronically controlled adhesive temperature and melting time - Panel thickness: 10-60 mm - 2 profiling milling units - IR heating lamps for material preheating - Spray device for release agent - Pressing zone with heated tower pads (can be replaced with pressing rollers) - Edge band magazine - Front and rear trimming units - Top and bottom flush trimming units for longitudinal edge overhang (2 at the top + 2 at the bottom) - Top and bottom polishing units - Computer control for quick, easy and precise adjustment of the machine's main functions and units Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2004, I sell the widebelt sanding machine COSTA K CCC 1350, year 2004. Configuration: 55 KW steel calibration cylinder 45 KW hard rubber cylinder 37 KW soft rubber cylinder. Cleaning unit combined brush + air blow in the outfeed. Working width 1350mm Pressure shoes for short elements. Itedpfx Ajt Rn E Tjg Aon Air-blow on all units. 3 motors 55 + 45 + 37kW Including full documentation. Condition very good ! Available immediately.

Condition: excellent (used), Year of construction: 2004, I sell the widebelt sanding machine COSTA S CCTT 1350, year 2004. Configuration: 1pc. steel cylinder 1pc. hard rubber cylinder 1pc electronic segmented pad 1pc electronic segmented pad Itjdpfx Aevxd Ttsg Asn Cleaning unit combined brush + air blow in the outfeed. Working width 1350mm Pressure shoes for short elements. Air-blow on all units. Vacuum underpressure table with integrated ventilator. Designed for the line, with fixed working height and moving aggregates. 4 motors total power 96kW Condition very good ! Available immediately.

Condition: ready for operation (used), Year of construction: 2008, Herzog + Heymann mobile flat pile feeder F530, year of manufacture 2008 Herzog + Heymann M7.32, year of manufacture 2008 – suitable for miniature folds – 12 folding pockets – roller diameter 32mm – minimum fold length 25mm – maximum working width 52cm – double rear knife shafts – transfer section Herzog + Heymann knife folding unit XS 300/6, year of manufacture 2008 – for small formats Iedpfx Aox Hbkdsg Aotn Herzog + Heymann upright sheet delivery 271, year of manufacture 2008 Stahl miniature upright sheet delivery STA30F, year of manufacture 1990 Herzog + Heymann transfer section 246/08, year of manufacture 2008 Optional: Herzog + Heymann small format feeder, year of manufacture 1991 – bottom suction feed

Condition: used, Machine is not operational, control system does not start, spare parts available with control system Horizontal machining center with pallet changer, STEINEL Type BZ 24 FFZ with CNC control system SIEMENS Sinumerik 850 M Mfg. No. 58, Year of manufacture 1990 Travel: X: 630 mm, Y: 500 mm, Z: 500 mm Table size per pallet: 400 x 400 mm Pallet rotation: B-axis Spindle speed: max. 7100 rpm, infinitely variable Tool holder: ISO 40 Power connection: 380 Volt, 50 Hz, 80 Amp. - Tool changer with 60 tool positions and double-arm gripper - Pallet changer with 4 pallets - Horizontally positioned pallet location for machining, axis movement = X-axis - Pallet rotation = B-axis - Spindle ram as Z-axis - Spindle ram with transverse movement as Y-axis - Coolant nozzles on the spindle ram and in the working area - Coolant system with chip conveyor under the working area - CNC control system SIEMENS Sinumerik 850 M with TFT monitor - Interface for data transfer Space requirement L x W x H: 9000 x 3100 x 3200 mm Weight: 13.5 tons Ijdpfx Aedzqmfjg Astn Machine is not operational, control system does not start - otherwise in good condition Transport dimensions: Machine with tool magazine L x W x H: 9000 x 3000 x 3000 mm Chip conveyor L x W x H: 4700 x 1000 x 1450 mm Partial sales possible, please inquire about the required spare parts.

Condition: excellent (used), ZILLI & BELLINI Automatic Sealing Machine with 12-Piston Filling Unit – Stainless Steel Automatic sealing machine from ZILLI & BELLINI with a 12-piston filling unit, designed to integrate the dispensing of the product and the subsequent hermetic sealing of containers within an automated industrial line. The unit combines a filling system with 12 pistons and an automatic sealing section, allowing both operations to be performed in a synchronized and continuous manner. The piston filling technology is particularly suitable for products whose dispensing requires repeatable volumetric control. Its construction, primarily in stainless steel, along with the complete enclosure of the work areas and the integrated control panel, makes it suitable for professional installations in the food and canning industry. MAIN FEATURES -Manufacturer: ZILLI & BELLINI -Type: Automatic filler + sealer -Filling unit: 12 pistons -Volumetric dispensing system -Automatic and continuous filling -Automatic container feeding -Synchronized positioning and transfer -Rotary processing system -Dispensing via pistons -Automatic sealing section -Cap feeding / positioning according to configuration -Continuous industrial operation -Construction primarily in stainless steel -Complete enclosure of work areas -Doors with inspection windows Itjdpszxwxfsfx Ag Aon -Integrated control panel -Safety guards -Structure on adjustable supports -Integrable into complete packaging lines PROCESS Containers are automatically fed into the machine and transferred to the 12-piston filling unit. The system performs a controlled volumetric dispensing, introducing the pre-set amount of product into each container. Once filling is complete, the containers are automatically transferred to the sealing section. In this second stage, the caps are positioned on the containers, and the corresponding mechanical sealing is performed, resulting in a product that is ready to continue to the subsequent operations in the line. It can be integrated with: -Container depalletizers -Washing / rinsing machines -Product feeders -Cap feeding systems -Conveyors -Weight checkers -Inspection equipment -Pasteurizers -Autoclaves / retorts -Labeling machines -Cartoning machines -Palletizers APPLICATIONS Particularly suitable for canning companies and manufacturers of packaged food products that need to automate the filling and sealing operations simultaneously. The 12-piston system may be suitable for various liquid, semi-liquid, or viscous products, depending on the product characteristics and the specific configuration of the equipment. Container formats, dispensing volumes, compatible products, and the type of sealing will depend on the tooling and configuration currently installed. The combination of ZILLI & BELLINI technology, 12-piston filling, and automatic sealing provides a compact solution for continuous industrial packaging lines. Machine available for inspection. Additional technical information, formats, capacities, production speed, dimensions, additional photographs, or videos can be provided upon request.

Year of construction: 2008, condition: excellent (used), I sell the widebelt sanding machine SGJ 1300R-RP. Year 2008 Configuration: steel cylinder / motor 37 KW combi unit rubber cylinder + pad / motor 22 KW Cleaning unit with dust extraction Feeding speed adjustable with variator Pressure pads for short elements on each unit. Infeed and outfeed table for long elements. Iedjkd Am Ejpfx Ag Aotn Working height 3-150mm Working width 1300mm Total power 64 KW Total weight 4000kg Condition very good ! Available immediately.

Condition: ready for operation (used), Year of construction: 2006, GUK folding machine FA 50/6 FA 52/4, year of manufacture 2006, equipped as follows: – Flat pile feeder FA 50 – 1st station FA 50 with 6 folding pockets, double pre-mounted knife shaft, top segment rollers, HHS cold glue 1 head, HHS hot glue with 2 heads, and transfer table. – 2nd station FA 52 with 4 folding pockets and transfer table, hydraulically height-lockable. Ijdpsx Enduefx Ag Ajtn – Knife shaft station SM 52 with 4 knife shafts, hydraulically height-adjustable. – Shingle delivery SM 52 – Vacuum/blast air pump – Window folding pocket – Various spare parts

Condition: used, Double end profiler, edge processing machine, flush milling cutter, edge milling cutter, spindle motor, milling motor Ijdpfx Asb Uhrzeg Aotn -1x motor: 1/1.5 kW 2670/5710 rpm at 50/100 Hz -1x motor: 5.5/8 kW 2870/5880 rpm at 50/100 Hz -Motor: mounted on guides -Motors: swiveling -Mill: with inserts -Dimensions: 900/1100/H1000 mm -Weight 274 kg

Condition: used, Description The AMR firewood splitting machine SPLITOMAT E offers fully automatic operation for professional use. It guarantees safe filling and operation and can process round wood with a diameter of 50 mm to 250 mm. The wood length can be adjusted to 150 mm or 200 mm without tools. With a cycle time of 1.5 s for 150 mm and 1.87 s for 200 mm wood, the machine achieves an hourly output of approximately 70-100 bags (40 l) in two-man operation. The splitting force is an impressive 5 tons, and the folding discharge chute and the adjustable feed chute (both 1,200 mm) ensure optimal handling. The X-shaped splitting blade allows for adjustable firewood thickness by adjusting the feed (0-110 mm). Equipped with a 62-liter oil tank and a standard oil cooler, the SPLITOMAT E is powerfully equipped. The drive is via an electric motor (400 V / 6.6 kW, CEE 16A), and the machine also has forklift slots and crane eyes for easy transport. - Fully automatic operation for professional use - Safe filling and operation - For round wood with a diameter of 50 mm to 250 mm - Wood length adjustable without tools to 150 mm or 200 mm - Cycle time of the splitting system: 150 mm / 1.5 s, 200 mm / 1.87 s - Hourly output of approx. 70-100 bags (40 l) in two-man operation with 200 mm wood length - Splitting force 5 tons - Discharge chute 1,200 mm, folding - Feed chute 1,200 mm, folding and adjustable in inclination - X-shaped splitting blade - Adjustable firewood thickness by adjusting the feed (0-110 mm) - Oil tank 62 liters - Oil cooler standard - Drive via electric motor 400 V / 6.6 kW, CEE 16A - Forklift slots & crane eyes Isdpfxez Uuubs Ag Ajtn