Used Hiwell Flattener for sale (64)

Condition: used, live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: Sandvik Costa, rotating centering point, centering cone flattened Ijdpfju I Hqwsx Ab Njat -Recording: MK5 -Model: A-5-65085 -Dimensions: Ø 110 x 275 mm -Weight: 6.4 kg

Condition: new, pressure 160 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 250 mm ram stroke speed 90.0 mm/sec work speed 7.5 mm/sec return speed 80.0 mm/sec work stroke 160 mm dayligth 395 mm table height 900 mm back stop - adjustable max. 800 mm oil volume 200 ltr. voltage 400 Volt total power requirement 11.0 kW weight 7524 kg Iedpfxjxab Hio Ab Neat range L-W-H 4250 x 1900 x 2550 mm Furnishing: - DELEM CNC control model DA-66T graphic/touch screen * 2D graphical programming * 17" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface * intuitive, graphical entry of profiles * Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation * Radius programming * Graphic tool and product library * Collision monitoring * 3D visualization * 1GB memory - controlled axes : Y1 - Y2 and X - manual table crowning - AKAS - laser protection device f. d. machine - Upper tool, deer foot - Lower tool, die block with 4V's - Light barrier behind the machine - 2 front support arms - SIEMENS - electrical system - BOSCH/HOERBIGER hydraulic system - CE mark/Declaration of Conformity - Operating manual : machine and control - Safety manual : press brakes

Condition: as good as new (ex-display), Year of construction: 2024, pressure 60.0 t chamfer lenght 1270 mm distance between columns 1000 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 165 mm/sec work stroke 275 mm dayligth 530 mm table height 900 mm table width 90.0 mm back stop - adjustable max. 800 mm oil volume 150 ltr. voltage 400 V engine output 7.5 kW Weight 4320 kg range L-W-H 2250 x 1960 x 2750 mm Demonstration/demo machine (!!) From our showroom (like new) With very few operating hours ----- CNC press brake with special equipment * Version "ERGO" - knee room for the operator * flexible articulated arm mount for the controller * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA-66T graphic/touch screen * 2D graphical programming * 17" TFT color screen with high resolution * Bending sequence calculation Ijdexabt Aepfx Ab Nsat * Product programming and real size display * USB interface * intuitive, graphical entry of profiles * Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation * Radius programming * Graphic tool and product library * Collision monitoring * 3D visualization * 1GB memory - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes : Y1 - Y2 - X - R - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - Front, foldable sheet metal support - Double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes

Condition: new, Year of construction: 2025, Sturdy cast steel construction With rigid milling spindle 3 spindle speeds 3500 to 10000 min¯¹ Milling spindle with right-left rotation Large dimensioned milling unit made of grey cast iron, directly mounted to the table With suction hood under the worktable for better extraction Solid and precise cast iron table Quick and easy speed change Powerful motor with 5,0 kW Standard arc milling protection hood Quality Made in Italy Equipment details Cast iron milling unit Directly mounted on the milling table Milling spindle mounted high up with precision ball bearing, thus lowest possible bearing load and longest possible service life 3 milling speeds from 3500 to 10000 min¯¹ Powerful motors equipped with powerful three-phase motor Iedpfx Abohp Rcre Neat Milling guard The standard milling guard is equipped with a height-adjustable guide rail and guard plate as standard for maximum safety. Milling fence Precise milling fence with a quick adjustment and a fine adjustment with scale on the fence jaw. The integrated suction connection ensures a clear view Milling table opening A large milling table opening also allows the use of larger flattening cutters and tenoning and slotting tools above and below the table Curved milling protection hood Included as standard Reversible fence jaws versatile integratable stop for bridging the tool gap enables safe working even with narrow workpieces TECHNICAL DAY

Condition: used, Year of construction: 2007, Koenig Combi line KCL/14 modular bun roll line for the production of high quality products: round, oval, rounded and stamped, long rolled and stamped, flattened, long rolled and cut. seeded. working width 800mm Konig Rex Futura II headmachine 4, 5 or 6 rows SK58 weight range 35-85 gram higher weight range is possible with new rounding drum ledges capacity 4, 5, 6 row maximum 6000, 7500 or 9000 pcs/h Siemens Simatic controlling with touch panel Iajdpforyckbox Ab Njt pre-prover VG190 long roll unit RR800 seeding unit setting unit AS800/1000 year of build 2007 pictures BEFORE reconditioning

Condition: used, Year of construction: 2008, Konig Combi Line KCL 7 modular bun roll line for the production of high quality products performance and products: flattened products (e.g. dough for Streuselschnecke) approx. 80g up to 6,000 pieces/hour; product diameter approx. 100-110mm - main product! round unstamped products: up to 7,500 pieces/hour round stamped products max. 75g (e.g. Kaiser): up to 7,500 pieces/hour long-rolled pressed products max. 75g (e.g. Styrian long roll, Housky): up to 6,000 pieces/hour long-rolled sliced products max. 75g (e.g. sliced rolls): up to 6,000 pieces/hour long-rolled products max. 85g up to 6,000 pieces/hour depending on the product length; max. product length 150mm flat-pressed products max 85g up to 6000 pieces/hour depending on product diameter; max. product diameter 120mm Konig Rex Classic I headmachine 3, 4 or 5 rows SK 58 weight range 35-85 gram capacity 3, 4, 5 row maximum 4500, 6000 or 7500 pcs/h König Combi LineR 600-VG 190/230-ST/K-K5-VO-SL4-Hou4-SCHN4-RR 560-4R -AS600 consisting of: pre-long rolling station R600 SPS Siemens Blue Line digital control panel pre-prover VG190/230 stamping device with 3 stamps: Kaiser Schnitt(cut) stamped forming station RR-560-4R driven lower belt pre-pressure roller adjustable 4 driven rollers 4R via lower belt - speed continuously adjustable - for flattening; flour duster thru R4 useable long moulding board for long rolling Iaodpfx Absub Rnqo Njt setting unit AS600/K+L setting device mechanically prepared for later installation of a Streuselstation - in line or to the left or right - front protective cover on the setting device for removal year of build 2008 pictures BEFORE cleaning

Condition: ready for operation (used), Koenig Mini Rex 4000 Futura bun roll machine 2-pockets with formstation DR-RR 400. For the production of rounded, long-rolled, long-rolled and folded as well as flattened products drum and pistons SKG54-AKG70 weight range 25-140 grams several weight ranges with other drums is possible through the use of combined stamp sizes, on request max. cap. 4000 pcs/h year R 2021 compact design fully automated dividing and rounding of wheat doughs and rye- -wheat doughs with a maximum rye percentage of 40% excellent results with the production of round, long-rolled, long-rolled and folded as well as flattened goods tried-and-tested in thousands of in-store bakeries height-adjustable calibrating head, folding net belts, lower belt and upper belt for ergonomic working with the following functions: transporting, long rolling, pressing flat teflonised collecting drawer for manual product removal high level of operating comfort quick and easy cleaning on account of plug-in elements stainless steel design Iasdpjxu E Rhjfx Ab Not power supply: 1.5 kW weight approx. 460kg

Condition: used, Year of construction: 2010, Koenig Combi line KCL/7 modular bun roll line for the production of high quality products: round, oval, rounded and stamped, long rolled and stamped, flattened Konig Rex Basic headmachine 3, 4 or 5 rows SK 67 weight range 55-120 gram capacity 3, 4, 5 row maximum 4500, 6000 or 7500 pcs/h Isdpoxr Ichofx Ab Nsat König Combi Line CL600+WDK+RR+AB consisting of: pre-long rolling station R600 Siemens digital control panel pre-prover VG190/230 stamping device with 2 stamps: Kaiser stamped forming station R600 setting unit AS600 year of build 2010 pictures BEFORE reconditioning

Condition: ready for operation (used), Cross Bar Milling Machine Manufacturer: Stegherr Model: KSF Suitable for milling cross bar joints, e.g., in windows, doors, and furniture Equipped with 3 milling units An upper and a lower milling unit simultaneously mill the two mitre-like cut-outs Iedpfew Imhcjx Ab Neat A third unit simultaneously performs the flattening The machine table is moved pneumatically-hydraulically. The forward and return speeds are adjustable. With foot switch 2 motors, each approx. 2.2 kW Total connected load approx. 4.5 kW Compressed air 6 bar Voltage 380 V 50 Hz Extraction connection diameter 180 mm Incl. 3 milling tools

Condition: used, Year of construction: 2000, operating hours: 15,800 h, Used Bottle Washer KLINGER up to 9600 bph This Bottle Washer handles up to 9,600 bottles per hour. The machine features 20 bottles per row, ensuring a long soaking time and double lye pumps. Constructed entirely of stainless steel, this bottle washer uses a Siemens S7 control system, ensuring reliable and precise operation. Technical Specifications of the Washing System The Used Bottle Washer KLINGER up to 9600 bph includes double heaters and overflow pumps, providing a high cleaning capacity. Consequently, this configuration treats each bottle uniformly, enhancing the efficiency of the washing process. The Siemens S7 control system, furthermore, offers a user-friendly interface via a touch panel, simplifying operational management. Potable Water Treatment Plant Iasdpfexqmrfox Ab Net Potable water treatment plays a crucial role in the proper functioning of the bottle washer. Hager + Elsässer provides the plant, which includes cation and anion exchangers, a salt container, a pre-filter, and a UV probe. This system processes 5 m³/h, ensuring high-quality water. Additionally, the reverse osmosis (RO) plant delivers a total desalination capacity of 2.5 m³/h, ensuring pure water for the washing process. Electrical Configuration and Control Panels This Bottle Washer features three electrical panels, arranged from left to right, with a Siemens touch panel for centralized control. This configuration allows for accurate monitoring and optimal operational management. In addition, the upper panels handle cooling, with a total residence time of 4.13 minutes and a treatment time of 1.63 minutes. Technical details Bottle cells: width and diameter: height 100 mm. 360 mm spray hole in the base of the cell diameter 20 mm. The bottle cell is not round on the lower insertion side, but flattened , so that even bottles with small diameters can be inserted into the cell without any problems. Bottles from 200 ml to 1,500 ml can be rinsed. The diameter of the bottle mouth must not be smaller than the spray hole in the bottom of the cell, i.e. at least 20 mm. If the bottles are very light, or made of PVC, the spray pressure of the pumps could be reduced using software, so that the bottles are not sprayed out of the cell. Fort PVC bottles the diameter of the bottles should not be smaller than 50 mm, depending on the shape and weight. The higher the weight, the better… PVC bottles do not cause problems because of their shape or diameter, but are usually too light… So your bottles can be easily worked. Treatment and Spraying Details of the Used Bottle Washer KLINGER up to 9600 bph The central panel, on the other hand, manages the spraying times with the following specifications: Spraying soda: 0.5 min. Residual soda: 0.83 min. Hot water: 0.38 min. Warm water: 0.38 min. Cold water: 0.38 min. Fresh water: 0.

Condition: new, empty load weight: 145 kg, maximum load weight: 605 kg, overall weight: 145 kg, loading space length: 2,006 mm, loading space width: 1,256 mm, loading space height: 1,500 mm, tire size: 155/70 R13, Year of construction: 2024, operation weight: 750 kg, Tarpaulin trailer Garden Trailer 201 KIPP with leaf grid attachment, support wheel and gray high tarpaulin incl. high bows The Garden Trailer 201 KIPP car trailer from UNITRAILER with a GVW of up to 750 kg has a hinged rear dropside so that it can be loaded and unloaded in just a few minutes! By using a tiltable drawbar, it can be positioned vertically anywhere on the rear dropside. All formalities in connection with the purchase are taken care of for you. The ordered goods with enclosed documentation will be delivered to the address you specify in Germany/Austria within 3 to 5 working days. Once you have received the car trailer, all you have to do is register it. Further information can be found at the following link - Registering a trailer: what do I need to consider? You can find the same model with additional drop sides instead of a leaf grid attachment under the following link. The same model with a blue high tarpaulin can be found under the following link. The new KIPP series is characterized by new, improved features: The new model has not only been equipped with a new hinge structure for the side walls, but also has a new, unique side wall design. The ribbed surface of the side walls guarantees safe use and no sharp edges. The bottom edge of each side panel has been flattened to improve your safety when loading and unloading your goods. The new side walls are 30 cm high, which means they are more compact than ever before! We have made this model even more user-friendly. It features such design changes as improved spacing between hooks for tarpaulin cords as well as an improved folding drawbar structure, which greatly reduces the need for a lot of trailer storage space. The bows have also been redesigned, which means that the frame beams are easier to fit. When you buy our trailer in a set with a high frame, you get more vertical beams, which increases the stability of the entire structure. No more water on the tarpaulin! This model has been equipped with revolutionary rear wall stops - improving the safety of the rear wall when the trailer is placed upright. Not only do you save a lot of space, but you also secure the structure of your rear wall. Necessary documents and fast delivery If you want to buy a car trailer Garden Trailer 201 KIPP, you don't have to worry about the formalities. We will prepare all the necessary documents required for immediate registration, i.e. invoice, EC certificate of conformity, vehicle registration document, warranty book (2-year warranty) and our certificate. Further information can be found under the following link: from order to delivery. Isdpfx Abouk Ethj Nsat Payment is made in advance or on receipt of the goods [the latter option is subject to higher shipping costs]. The purchased car trailer will be shipped within 24 hours with the complete set of documents for registration.

Condition: new, empty load weight: 151 kg, maximum load weight: 599 kg, overall weight: 750 kg, loading space length: 2,006 mm, loading space width: 1,060 mm, loading space height: 1,500 mm, tire size: 155/70 R13, Year of construction: 2024, Tipping trailer Garden Trailer 200 KIPP with leaf grate attachment, support wheel and gray high tarpaulin incl. high bows The Garden Trailer 200 KIPP car trailer from UNITRAILER with a maximum tare weight of up to 750 kg has a hinged rear dropside so that it can be loaded and unloaded in just a few minutes! By using a tiltable drawbar, it can be positioned vertically anywhere on the rear dropside. All formalities in connection with the purchase are taken care of for you. The ordered goods with enclosed documentation will be delivered to the address you specify in Germany/Austria within 3 to 7 working days. Once you have received the car trailer, all you have to do is register it. Further information can be found at the following link - Registering a trailer: what do I need to consider? The new KIPP series is characterized by new, improved features: The new model has not only been equipped with a new hinge structure for the side walls, but also has a new, unique side wall design. The ribbed surface of the side walls guarantees safe use and no sharp edges. The bottom edge of each side panel has been flattened to improve your safety when loading and unloading your goods. The new side walls are 30 cm high, which means they are more compact than ever before! We have made this model even more user-friendly. It features such design changes as improved spacing between hooks for tarpaulin cords as well as an improved folding drawbar structure, which greatly reduces the need for a lot of trailer storage space. The bows have also been redesigned, which means that the frame beams are easier to fit. When you buy our trailer in a set with a high frame, you get more vertical beams, which increases the stability of the entire structure. No more water on the tarpaulin! This model has been equipped with revolutionary rear wall stops - improving the safety of the rear wall when the trailer is placed upright. Not only do you save a lot of space, but you also secure the structure of your rear wall. Iasdpfxouk E Npo Ab Not Tipping trailer Garden Trailer 200 KIPP 200x106 cm 750 kg with leaf grid attachment, high tarpaulin, high bows and support wheel Necessary documents and fast delivery If you want to buy a Garden Trailer 200 KIPP car trailer, you don't have to worry about the formalities. We will prepare all the necessary documents required for immediate registration, i.e. invoice, EC certificate of conformity, vehicle registration document, warranty book (2-year warranty) and our certificate. Further information can be found under the following link: from order to delivery. Payment is made in advance or on receipt of the goods [the latter option is subject to higher shipping costs]. The purchased car trailer will be shipped within 24 hours with the complete set of documents for registration.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, operating hours: 60 h, +++ Demo machine, approx. 60 operating hours +++ +++ Descending Die +++ Basic machine: TruPunch 3000 large format (S20) Machine: - Box frame - Hybrid axis system - Linear tool magazine with 24 stations for clamps and tools - Hydraulic clamps (3x) - Drives with maintenance-free three-phase motors - Repositioning with programmable presser foot - Foot switch to close clamps - Part chute, right - Part removal flap, left - Sensor for part removal flap - SortMaster Compact retrofit-prepared Punching head: - Delta Drive - Rotating single-station tool adapter - Programmable presser foot position - Tool length compensation - Punch spray lubrication - Punching slug vacuum - Forming function - Punch stroke counter Control: - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19" TFT color display - Touchpoint - Auto-shutdown - Remote support interface - Program manager - Production plan Data transmission: - Central Link - Online Update Manager Safety: - CE marking and EC Machinery Directive - Double-beam safety light barrier Advanced standard configuration: - First index pin (inside right) - Ball tables - Part chute for finished part container - Chip container to rear for removal Advanced machine and punching features: - MultiTool function - MultiShear function - MultiBend function - Tapping function with thread counter - Forming tap breakage control - Lubricant level monitoring - Unlimited time license - Marking/Quick beading function (option) - Engraving function Iedexmfc Ujpfx Ab Noat - Deburring and roller technology function - Adaptive stroke calibration - StripLine - Die spray lubrication with fill level monitoring - Descending Die - Integrated flattening function - Smart punch monitoring - Additional clamp - Height-adjustable clamp - Vibration damping - Chip container removed to front - Brush tables with loading and unloading assistance - Warped sheet detection Technical data TruPunch 3000 large format (S20) Dimensions / Weight: Width: 7644 mm Depth: 7666 mm Height: 2200 mm Weight (fully equipped): 13,800 kg Control / Hardware / Electrics: Hard disk type: SSD Number and size of hard disks: 2 x 120 GB Customer program memory: 10 GB Display: Touchscreen Display size: 21.5 in Interfaces: USB Network: RJ45 Control type: Bosch CML75 Operating system: Windows 10 IoT Axis data: X/Y/C axis drive: NC-controlled, maintenance-free three-phase servo motors Punching head drive: Electric Max. X axis speed: 90 m/min Max. Y axis speed: 60 m/min Max. simultaneous axis speed: 108 m/min Max. C axis speed (punching): 350 rpm Max. C axis speed (tapping): 350 rpm Max. punching stroke rate (E=1mm): 690 1/min Max. marking stroke rate: 1000 1/min Accuracy — positioning deviation Pa: +/- 0.1 mm Accuracy — position range Ps: +/- 0.03 mm Smallest programmable increment: 0.001 mm Working range / Workpiece size: Max. sheet thickness: 6.4 mm Max. workpiece weight: 230 kg X axis working range: 3000 mm Y axis working range: 1550 mm Punch-specific data: Max. punching force: 180 kN Max. presser foot force: 20 kN Max. tool size, punching (outer diameter): 76.2 mm Max. tool size, forming (outer diameter): 101.6 mm

Condition: new, Year of construction: 2025, STARWELD GR is a high performance mesh welding plant for the production of electro-fused grating. A big product range can be achieved through its easy adjustments. Special designs can be adopted according to the customer needs (special technical specifications or special products). Products can be used for stairs, floorings, catwalks, platforms, fencing, etc. Iajdpfxod Rlapj Ab Njt Features: Feeding from coil or pre-straightened and cut bearing bars Automatic or manual feeding of flat steel bearing bars Automatic feeding of round or twisted-square cross bars from coils or hopper Various bearing bar spacings: 22, 25, 30, 34 mm or different on demand Very effective grating flattening mechanisms Cross bar automatic edge trimming Fully automatic CNC programmable High speed High precision through advanced servo technology Easy machine adjustments Easy maintenance & use High reliability & long life