Used Homag Jurassic Map Hot Melt Adhesive for sale (5,271)

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 Dodpfjz Ikq Dex Akmjwc EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 0-250-75-2227, input frequency: 50 Hz, input current: 21 A, For sale: a powerful, compact, vertical CNC drilling machine by HOMAG. Used in the production of custom-made furniture, regularly serviced, and in very good condition. Ready for immediate use. Key information and technical condition: Model: Drillteq V-200 / Optimat BHX055 Year: 2020 Workpiece length (X): 200mm to 2500mm Workpiece width (Y): 70mm to 850mm Workpiece thickness (Z): 12mm to 60mm Safe clamping system protects delicate panel surfaces Djdpfxjzvxz Aj Akmswc Power supply: 400V (3 phases), 50Hz

Condition: excellent (used), SINGLE SIDE EDGE BANDER (RIGHT) Edges (band in rolls) thickness (Min/Max) mm 0,3/ 3 Edges thickness in stips / lippings (min/max) mm 0,4 / 8 Panels thickness (min/max) mm 8 / 60 Numerical Control POWERTOUCH Feeding speed (adjustable) m/min 8 - 14 Top pressure system with rubber wheels Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) (2 x Kw 2,2) Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) QA65 N Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) (2 x Kw 0,22) Fine Trimming unit (2 x Kw 0,55) Corners Rounding (contour trimming) (1 x Kw 0,35) Profile edge scraping unit MZ40 Dwsdpfxszyahxo Akmec Glue scraping unit Buffing unit (2 x Kw 0,09)

Condition: used, Year of construction: 1985, Folding system Note: The system has been refurbished and received a new control system in 2013! Folding system consisting of: Lifting table with pusher Roller conveyor Infeed Transfer system and workpiece pre-cleaning Double-end profiler Manufacturer: Homag Type: FG63 Dedezuynzepfx Akmowc Year of manufacture: 1985 Technical data - with adhesive strip application - Machine for profiling and folding the edge strips - Milling station on both sides - Control system: Siemens Simatic Touch - Glue application unit - Folding unit for folding the pre-folded workpieces - Sliding shoe for pressing - Extraction table for material removal Electric scissor lift table Manufacturer: Altek Year of manufacture: 2014 Technical data - Load capacity max. 1000 kg - with attached roller conveyor - Dimensions approx. 3100 x 1000 mm - with height measuring device for automatic detection of stack height and corresponding cycle time Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, FOR SALE: COMPLETE UV PAINTING LINE – SORBINI / CEFLA / BARGSTEDT Individual machines can also be purchased! For sale: a complete, industrial UV painting line designed for finishing flat surfaces, furniture components, MDF, HDF boards, panels, and other wood-based materials. The line is equipped with automatic loading and unloading systems, wide-belt sanders, dust extraction systems, multiple coating stations, UV drying tunnels, and a UV printer. Main equipment of the line: • Automatic loading and unloading systems BARGSTEDT • Pallet storage systems BARGSTEDT • Wide-belt sander BUTFERING OPTIMAT SCR 413/RREE with HEESEMANN EA2 dust extraction • Wide-belt sander BUTFERING OPTIMAT SCR 213/EE • Brush sanding machine SORBINI SMART SAND 1 • Numerous CEFLA conveyors • Roller coating machines: SORBINI KOMPACT SYSTEM SORBINI SMARTCOATER SP1 (several units) SORBINI SMARTCOATER MF (several units) • CEFLA drying tunnels: hot air tunnels IR tunnels UV tunnels (UV 2000 M2, UV 2000 M3) • SORBINI T/20-3-STP UV printing line (3-head) Dodpfx Akozg Epusmowc The line enables the execution of a complete technological process: sanding, dust extraction, application of primers and paints, UV curing, UV printing, and final surface finishing. This is an ideal solution for manufacturers of furniture, furniture fronts, decorative panels, and carpentry elements. Machines from renowned manufacturers: SORBINI, CEFLA, BARGSTEDT, BUTFERING, HEESEMANN. Sale of the complete line. Viewing is possible by prior appointment. Detailed technical specifications available upon request.

Condition: excellent (used), Double side - First (1st) machine in a line Machine Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 - 40 Working width (min/max) mm 195 / 1500 Numerical Control /Software Power Control 22 / woodCommander Adjustable feeding speed (m/min) 15 - 32 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Hogging Units KD 10 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 Pressure zone A Edge coils supporting unit (No. 2 of reels) with servo-assisted edge feeding Rough Trimming unit BF10 (2 x Kw 0,55) Fine Trimming unit PF20 (2 x Kw 0,4) FRRE SPACE Djdjzrd Nqjpfx Akmswc Milling grooving unit UF 11 (1 x Kw ?) Profile Scraping unit PN 10 Finish processing unit (Glue scraper + Buffing unit) FA 11 Spraying Unit (for polishing liquid)

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 - 40 Working width (min/max) mm 250 / 2500 Numerical Control /Software Power Control 22 / woodCommander Adjustable feeding speed (m/min) 15 - 35 Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 1000 SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Anti-chipping Milling Unit (1 x Kw 4,5) Hogging Units KD 11 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 Dwjdpfxszrd Rzj Akmec Pressure zone A Edge coils supporting unit (No. 2 of reels) with servo-assisted edge feeding Snipping Unit HL86 (2 x Kw 0,22) Rough Trimming Unit BF10 (2 x Kw 0,55) Fine Trimming Unit PF20 (2 x Kw 0,4) FRRE SPACE for Corner Rounding unit ( Contour Trimming) FF 12 (2 x Kw 0,4) Profile Scraping unit PN 10 Finish processing unit (Glue scraper + Buffing unit) FA 11 Spraying Unit (for polishing liquid)

Condition: excellent (used), SINGLE SIDE EDGE BANDER (RIGHT) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Edges thickness in stips / lippings (min/max) mm 0,4 / 15 Panels thickness (min/max) mm 8 / 60 Numerical Control POWERTOUCH Feeding speed (adjustable) m/min 8 - 18 Top pressure system with rubber wheels Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) (2 x Kw 2,2) Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) A12 Edge coils supporting unit (reels N°) 1 Dedszyaiiepfx Akmowc Snipping (end-cutting) unit (2 x Kw 0,35) pneu Rough Trimming unit (2 x Kw 0,55) Corners Rounding (contour trimming) (2 x Kw 0,4) Profile edge scraping unit (fast-release) Glue scraping unit Spraying Unit (for polishing liquid) Buffing unit (2 x Kw 0,18)

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, - 5-axis spindle DRIVE 5C Profi, 12 kW - Work area: 4000 x 1300 mm (X, Y) - Tool changer: 30-position - Drilling units: 12x vertical, 2+4 horizontal Dwsdpfezz N Uqsx Akmec - Projection laser SL LASER Pro Director 6 - Slotted table/magnetic table

Condition: like new (used), Year of construction: 2020, operating hours: 50 h, We are selling several hotmelt stations from Huangsang. This system is almost as good as new and was only used briefly for a project. Data: Model: HS808A Capacity: 10 l Dodpfx Aorzauzekmewc Operating voltage: 220 V Power: 2300 W Temperature: 200 °C Weight: 61 kg Year of manufacture April 2020 _____ Model: HS808A Capacity: 10 l Operating voltage: 220 V Power: 2300 W Temperature: 200 °C Weight: 61 kg Year of manufacture September 2020 _____ Model: HS2199 Capacity: 10 l Operating voltage: 220 V Power: approx. 4000 W Temperature: 200 °C Weight: approx. 125 kg Year of manufacture 2020 More detailed information on request. Please contact us!

Condition: good (used), Year of construction: 2011, functionality: fully functional, number of axes: 5, number of slots in tool magazine: 18, controller manufacturer: Homag, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, For sale is a HOMAG BMG 311 Venture 316 L CNC machining center manufactured in 2011. The machine is currently in operation and can be inspected and tested while powered on until its availability in November 2026. A video of the machine in operation is available; see the advertisement or YouTube. Equipment: Djdpfxoz Ek Hte Akmowc * HOMAG BMG 311 Venture 316 L * Year of manufacture: 2011 * Control system / Software: WoodWOP 6.1 * Tooling will NOT remain on the machine * Vacuum pump included * Currently powered on and operational * Inspection and test run possible until November 2026 The machine is suitable for the professional CNC machining of wood-based materials and, due to its extensive equipment, is immediately ready for further use in production. A detailed functional test on-site is possible by arrangement. Availability: from November 2026 If you have any questions about the machine, require further technical data, images, or would like to arrange an inspection appointment, please do not hesitate to contact us. Contact: Dennis Bitzigeio Company: BIMA Maschinen & Zubehör

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 0-250-87-8843, input frequency: 50 Hz, input current: 21 A, For sale: a powerful, compact, vertical CNC drilling machine from HOMAG. Used in the production of custom-made furniture, regularly serviced, and in very good condition. Ready for immediate use. Key information and technical condition: Model: Drillteq V-200 / Optimat BHX055 Year of manufacture: 2022 Workpiece length (X): from 200mm to 2500mm Workpiece width (Y): from 70mm to 850mm Workpiece thickness (Z): from 12mm to 60mm Dwedpfjzvx Ucjx Akmoc Safe clamping system to protect delicate surfaces Power supply: 400V (3 phases), 50Hz

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: P260713253, 𝘼𝙪𝙩𝙤𝙢𝙖𝙩𝙞𝙘 𝘿𝙤𝙪𝙗𝙡𝙚-𝙀𝙣𝙙 𝙋𝙧𝙤𝙛𝙞𝙡𝙞𝙣𝙜 𝙇𝙞𝙣𝙚 𝙛𝙤𝙧 𝙋𝙖𝙧𝙦𝙪𝙚𝙩 𝙁𝙡𝙤𝙤𝙧𝙞𝙣𝙜 1. 𝗚𝗲𝗻𝗲𝗿𝗮𝗹 𝗜𝗻𝗳𝗼𝗿𝗺𝗮𝘁𝗶𝗼𝗻 • HOMAG OPTIMAT FRP225/7/10PL/L – Longitudinal Profiling Machine • HOMAG OPTIMAT FRP226/5/5PL/Q – Cross Profiling Machine Automatic, high-speed double-end profiling line designed for the production of solid wood, engineered wood, and laminate flooring. The line performs precision machining on all four edges, including tongue-and-groove and click-locking profiles. 2. 𝗠𝗮𝘁𝗲𝗿𝗶𝗮𝗹𝘀 𝗣𝗿𝗼𝗰𝗲𝘀𝘀𝗲𝗱 • Solid hardwood flooring • Engineered wood flooring • Laminate flooring • Multi-layer parquet • Decorative flooring panels 3. 𝗠𝗮𝗶𝗻 𝗧𝗲𝗰𝗵𝗻𝗶𝗰𝗮𝗹 𝗦𝗽𝗲𝗰𝗶𝗳𝗶𝗰𝗮𝘁𝗶𝗼𝗻 Parameter Specification Machine Type Double-End Tenoner / Profiling Line Longitudinal Machine HOMAG FRP225 Cross Machine HOMAG FRP226 Maximum Feed Speed Up to 80 m/min Working Principle Continuous automatic feed Number of Working Units 7 (FRP225) + 5 (FRP226) Total Working Units 12 Production Mode Continuous 4. 𝗪𝗼𝗿𝗸𝗽𝗶𝗲𝗰𝗲 𝗖𝗮𝗽𝗮𝗰𝗶𝘁𝘆 Parameter Typical Range Thickness 5–25 mm Width Customer-specific configuration Length Customer-specific configuration 5. 𝗠𝗮𝗰𝗵𝗶𝗻𝗶𝗻𝗴 𝗢𝗽𝗲𝗿𝗮𝘁𝗶𝗼𝗻𝘀 Dwsdpfx Akjzmrw Ssmoc The line is capable of performing: • Longitudinal profiling • Cross-end profiling • Tongue machining • Groove machining • Click profile machining (depending on tooling) • Micro-bevel production • Relief grooves • Edge trimming • Sizing and calibration • Four-side profiling 6. 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗖𝗼𝗻𝗳𝗶𝗴𝘂𝗿𝗮𝘁𝗶𝗼𝗻 HOMAG FRP225 Function • Longitudinal edge profiling Configuration • Six machining units • High-frequency spindle motors • Precision side guides • Automatic pressure system • Heavy-duty chain conveyor HOMAG FRP226 Function • Cross-end profiling Configuration • Four machining units • Automatic synchronization with FRP225 • Precision positioning system • High-speed transfer conveyor 7. 𝗗𝗿𝗶𝘃𝗲 𝗦𝘆𝘀𝘁𝗲𝗺 • High-frequency spindle motors • Variable-speed feed drive • Precision chain transport system • Pneumatic pressure rollers • Servo-controlled positioning (depending on machine version) 8. 𝗧𝗼𝗼𝗹𝗶𝗻𝗴 • Leitz • Leuco • Kanefusa • AKE • Tigra Typical tooling: • Profile cutters • Grooving cutters • Chamfer cutters • Relief cutters • Diamond tooling (PCD) 9. 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗖𝗼𝗻𝘁𝗿𝗼𝗹 • Siemens PLC control system • Frequency-controlled spindle drives • Digital machine diagnostics • Electronic feed speed adjustment 10. 𝗣𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝗼𝗻 𝗣𝗲𝗿𝗳𝗼𝗿𝗺𝗮𝗻𝗰𝗲 Parameter Typical Value Feed Speed Up to 80 m/min Production Capacity Approximately 1,500–4,000 m² per shift* 11. 𝗧𝘆𝗽𝗶𝗰𝗮𝗹 𝗣𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝗼𝗻 𝗟𝗶𝗻𝗲 𝗟𝗮𝘆𝗼𝘂𝘁 1. Automatic infeed system 2. HOMAG FRP225 longitudinal profiler 3. Automatic transfer section 4. HOMAG FRP226 cross profiler 5. Inspection station 6. Automatic stacker 12. 𝗠𝗮𝗶𝗻 𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲𝘀 • High dimensional accuracy • Excellent profile repeatability • High production speed • Fast tooling changeover • Continuous automatic operation • Suitable for traditional tongue-and-groove and modern click systems • Reliable industrial design for high-volume production 𝗧𝘆𝗽𝗶𝗰𝗮𝗹 𝗔𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻𝘀 • Solid parquet flooring • Engineered flooring • Laminate flooring • Luxury wood flooring • High-precision click flooring systems

Condition: like new (used), Year of construction: 2016, machine/vehicle number: 0-250-11-2627, functionality: fully functional, input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 3,050 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 80 mm, workpiece weight (max.): 60 kg, number of axes: 3, total height: 2,500 mm, total length: 2,500 mm, overall weight: 3,200 kg, table width: 4,740 mm, Equipment: CE marking, documentation/manual, HOMAG / WEEKE OPTIMAT BHX 200 CNC – Year of manufacture 2016 – HSK63 9 kW – Clamex-P – automatic tool changer – extensive equipment We are selling our HOMAG / WEEKE OPTIMAT BHX 200 vertical CNC machining center, manufactured in 2016. We purchased the machine directly from HOMAG Polska in 2018. Before the purchase, the machine was presented at a trade fair in Germany. It was exhibited with a very extensive range of equipment, which was one of the main reasons for our purchase. Originally, we planned to integrate the BHX 200 into our production line as part of further automation by connecting it to an industrial robot. Ultimately, we did not receive EU funding for this investment. At the same time, our current production volume is not large enough to utilize the full potential of this machine. This is also evident in the relatively low operating hours. For this reason, we have decided to sell the machine. The BHX 200 has served us reliably for many years and is still in continuous production today. We use it to manufacture furniture components from sheet materials. The machine operates very precisely and reliably and is ideally suited for flexible furniture production. This is not a basic BHX 200 with standard equipment. The machine has a very extensive configuration for drilling, milling, grooving, and hardware processing. Equipment: * Vertical drilling head V15 High Speed with 15 individually controlled spindles * 6 horizontal drilling spindles in the X-axis * 4 horizontal drilling spindles in the Y-axis * Additional vertical 3-spindle drilling head for hardware * HSK63 milling spindle * Power up to 7.5 / 9 kW * Speed range 1,250–24,000 rpm * Automatic tool changer * Automatic pick-up tool magazine with 4 positions for HSK63 tools or units Dsdpfjzzxzmjx Akmjwc * Special unit for Lamello Clamex-P * Unit for grooving in the X and Y axes * Optical workpiece control in X and Y * Automatically positioned workpiece clamps * Automatic adjustment to workpiece thickness * Integrated 1D/2D barcode system including wireless Datalogic barcode scanner and base station Workpiece dimensions: Length: 200–3,050 mm Width: 50–1,250 mm Thickness: 8–80 mm Maximum workpiece weight: 60 kg Control system and software: * HOMAG powerControl / powerTouch * 21.5" Full-HD touchscreen * woodWOP * DXF Import Basic * Tool database * Production list management * woodScan * Ethernet * UPS * ECO Plus * Climate control for the control cabinet The particular strength of this machine lies in its versatility. It is particularly suitable for manufacturers who produce many different types of furniture, sizes, and small to medium batch sizes. The combination of vertical and horizontal drilling, milling, grooving, Clamex-P processing, and automatic tool changer allows a very large number of machining steps to be performed on a single machine. The machine is available immediately. We are confident in its very good technical condition. It is still in use in our production. An inspection and demonstration of the machine in operation can be arranged by appointment. Location: Białystok, Poland.

Condition: used, Year of construction: 2022, operating hours: 540 h, Okleiniarka wąskich płaszczyzn + + stacja XES200 Producent: HOMAG Typ: EDGETEQ S-500 KAL375 AT Rok 2022 + stacja XES200 przeznaczoną do obsługi systemu klejowego PUR zastosowanie technologii airTec Sterowanie: HOMAG powerControl PC23 z ekranem powerTouch Wyposażenie: Dwsdszkmqzepfx Akmec agregat wstępnego frezowania, jednostka klejowa technologia airTec agregaty obcinające agregaty frezujące, agregaty zaokrąglające cykliny polerki Dodatkowe wyposażenie: stacja serwisowa HOMAG XES 200. only 540 working hours!!

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: 0-250-43-0070, functionality: fully functional, operating hours: 2,731 h, power: 10 kW (13.60 HP), input voltage: 300 V, input current: 32 A, year of last overhaul: 2026, Equipment: documentation/manual, 3-AXIS (X-Y-Z) CNC MACHINING CENTER Movable table (workpiece), movable machining head Vertical table (workpiece) Cec Ard Uoyywcvspnjrd Control system: POWERCONTROL + POWERTOUCH Software: woodWOP Safety cabin for the machining head Dwodpfx Aozi Ul Rskmsc No. 1 locking system for workpiece clamps in the working area Workpiece drive with transport chain Minimum workpiece dimensions (X-Y-Z) mm 200 x 70 x 12 Maximum workpiece dimensions (X-Y-Z) mm 3050 x 850 x 60 Total connected power (kW): approx. 11.5 WORKING GROUPS: No. 1 drilling unit (Power (kW) 2.3) with vertical spindles: - No. 13 independent vertical drilling spindles (V13 High Speed) - No. 6 independent horizontal drilling spindles (4 in X + 2 in Y) No. 1 grooving saw unit (for operations in the X-axis) diameter (mm) 100 No. 1 vertical main spindle (milling unit) HKS63 (Power kW 5) Automatic tool changing system - magazine positions (No. 4 tool positions)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: P260713249, The HOMAG SAWTEQ B-300 profiLine is a high-performance industrial beam saw designed for the precision cutting of coated and uncoated wood-based panels. Engineered for continuous production environments, it combines robust mechanical construction, high cutting performance, automated material handling, and intelligent digital control to maximize productivity while maintaining exceptional cut quality. Key performance features include a 3,800 mm cutting length, ±0.1 mm/m positioning accuracy, and a powerful 24 kW main saw motor with a 2.2 kW scoring saw, ensuring clean, chip-free cuts even on laminated materials. The saw carriage reaches feed speeds of up to 130 m/min, enabling short cycle times and high daily output. Material handling is highly automated through a 4-ton hydraulic lifting table, dual micro-feeders, automatic loading for thin panels, alignment units, and an optimized pusher system equipped with 11 lifting clamps. Air cushion tables with integrated air nozzles facilitate effortless panel movement while protecting sensitive surfaces from scratches. The machine is built around a heavy-duty steel frame with precision rack-and-pinion drives, maintenance-free measuring systems, and a patented central squaring system that reduces cycle times by up to 25% compared with conventional designs. The robust construction ensures long-term dimensional accuracy, minimal vibration, and excellent repeatability. Operation is managed through the PowerControl V2.1 system with a 24-inch Full HD multi-touch display, HOMAG powerTouch interface, CADmatic 5 software, integrated diagnostics, tool management, and network connectivity. The machine is also tapio Ready, enabling future integration with HOMAG's digital production ecosystem and Industry 4.0 services. Dsdpfx Akezmglkomowc Additional features such as ecoPlus energy-saving technology, automatic cutting height adjustment, optimized dust extraction, pneumatic saw movements, electric scoring saw adjustment, and remote diagnostics via TeleServiceNet further enhance machine efficiency, reduce operating costs, and simplify maintenance. Overall, the SAWTEQ B-300 profiLine provides an ideal solution for manufacturers seeking high productivity, precision, automation, and digital connectivity in industrial panel processing.

Condition: excellent (used), Year of construction: 2021, operating hours: 140 h, functionality: fully functional, feed length X-axis: 3,050 mm, feed length Y-axis: 1,250 mm, feed length Z-axis: 80 mm, input frequency: 50 Hz, input current: 29 A, working width: 3,050 mm, We offer this very good HOMAG DRILLTEQ V-500 throughfeed drilling machine, year of construction 2021. Working dimension X 3.050 mm Working dimension Y 1.250 mm Working dimension Z 80 mm Number of milling spindles 1 Main motor power 10 kW Rotation speed max 24.000 rpm Tool clamping system HSK-F63 Tool changer positions 4 Vertical drilling spindles 15 Horizontal drilling spindles in X 6 Horizontal drilling spindles in Y 4 Groove saw 90° turnable Vertical working surface Machine table Feed-through technology Special workpiece clamping system clamp gripper Barcode reader Safety device enclosed cabin Control Homag powerTouch, HOMAG POWER CONTROL Software HOMAG WOODWOP 7.2 Conformity marking CE mark Dodsylp Slspfx Akmewc Category: Machining centre Type designation: DRILLTEQ V-500 Subtype: OPTIMAT BHX200 Machine number: 0-250-73-7195 Wiring diagram: 0-250-73-7195 Supply voltage: 400Y/230 V Neutral conductor: yes Phases: 3 Frequency: 50 Hz Maximum operating full load current: 29 A Fuse rating: 35 A Control voltage: 24 V If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2023, operating hours: 489 h, Homag EDGETEQ 300 The machine will be available from approximately the end of December 2026. Dsdpfoz D U A Ajx Akmjwc For further information about the machine, please see the images or feel free to request it.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece height (max.): 60 mm, roll diameter: 830 mm, On-site inspections while the machines are running are possible in Lithuania! Fully automatic edge banding line with the following machines: HOMAG PROFI KAL330/9/A3/WZ (year of manufacture 2013) HOMAG PROFI KAL370/8/A3/WZ (year of manufacture 2016) HOMAG PROFI TBL100/20/30/F infeed table (year of manufacture 2013) HOMAG POWER TWL410/25/LQ transfer system cross conveyor (year of manufacture 2016) TECHNICAL DETAILS HOMAG PROFI KAL330/9/A3/WZ & PROFI KAL370/8/A3/WZ edge banding machines Workpiece width without edge at a workpiece thickness of 12–22 mm: min. 60 mm (depending on the workpiece length) Workpiece width without edge at a workpiece thickness of 23–60 mm: min. 100 mm (depending on the workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12–60 mm Edge height: max. workpiece thickness + 4 mm Edge material on a roll: 0.3–3 mm Edge material height PVC: max. 135 mm Edge material height veneer: max. 100 mm Roll diameter: max. 830 mm HOMAG PROFI TBL100/20/30/F infeed table Roller diameter: 54 mm Roller spacing: approx. 60 mm Panel length: 240–2,500 mm Panel width: 120–3,000 mm HOMAG POWER TWL410/25/LQ transfer system cross conveyor Roller diameter: 64 mm Roller spacing: 110 mm Panel length: 240–2,500 mm Panel width: min. 240 mm Panel thickness: 8–60 mm Panel weight: max. 80 kg EQUIPMENT Dwjdpoz A Tx Tsfx Akmjc Clearance-type joining-cutting unit on both edge banding machines A3 basic gluing unit on both edge banding machines Clearance-type processing units on both edge banding machines FA11 finishing unit on the HOMAG PROFI KAL330 FA21 finishing unit on the HOMAG PROFI KAL370 Fixed stop on the left side of the infeed table Transport rollers on the infeed table Side conveyor belt on the infeed table Electropneumatically controlled cross guard on the infeed table Manually adjustable infeed guard Set of small parts Integrated air cushion table Fixed stop on the left side in the infeed and outfeed of the transfer system cross conveyor Infeed roller track with conveyor belt and cross transport Controlled cross conveyor in the infeed Outfeed roller track Controlled cross conveyor in the outfeed Electropneumatically controlled stop guard Side transport belt Manually adjustable panel overhang

Condition: excellent (used), "SOFTFORMING" LEFT-side SINGLE-SIDE SIZING and EDGE BANDING Edges (tape) thickness in rolls (min/max) mm 0,4 / 3 Panels thickness (min/max) mm 8 / 60 Numerical Control / Software PC 22 / WoodCommander Adjustable feeding speed (m/min ) 10 - 40 Working line (work units support tables), manual adjustment mm 30 - 80 SIZING PART: Spraying unit (Anti-sticking liquid) Double Hogging Units KD 10 (2 x Kw 6,6) Fine Trimming unit for softforming (2 x Kw 1,85) 0°-20° Belt sanding unit (abrasive papers) for straight edge KS 10(mm 120 x 2100) Free space mm 700 EDGE-BANDING PART: Glueing Unit (Hot Melt + Quick Melt Unit) E34 softforming Dodet N H Tajpfx Akmswc Pressing rollers (revolver) both for straight and shaped edges (softforming) G (4 stations) With top and bottom rolling knives (In-lay) Edge coils supporting unit E3 (No. 6 of reels) Snipping (end-cutting) unit HL 84 (2 x kW 0,8) 0°-30° (max 25 m/min) 1st Fine Trimming unit 2 units x (2 x kW 0,55) 0°-30° pneumatic 2nd Fine Trimming unit 2 units x (2 x kW 0,55) 0°-30° pneumatic Milling grooving unit UF11 (1 x kW 4) 0°-90° Profile Scraping unit PN20 (Pneumatic adjustment) Finish processing unit (Glue scraper + Buffing unit) FA11

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, - Year of manufacture: 2003, commissioning: 2004 - Working dimensions: 4000x1600x200mm - Main spindle: 7.5kW - C-axis - Gluing unit - Drills: 12x vertical Dodpfx Akeza Urysmjwc - LED display of the vacuum pump position - Tool magazine: 12 slots

Condition: used, Year of construction: 2013, total height: 2,100 mm, total length: 9,000 mm, total width: 1,050 mm, Weight: 6.000 kg - Details: - └ Description: Not working: Several loose sensors and the glue bin has been disassembled, machine has not yet been tested - Year: 2013 - Documentation available: No Dedpfxjyrp Uao Akmjwc - CE certificate present: No - Serial number: - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - - Type/Brand: Nordson - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: No - └ 5th unit type: Rough milling unit - └ 6th unit type: Milling unit - └ 7th unit type: Fine milling unit - └ 8th unit type: Milling unit - └ 9th unit type: Milling unit - - Tools available: Yes - Glue system: Glue pot - Voltage [V]: 400 - Current consumption [A]: 69 - Fuse [A]: 80 - Transport dimensions: 9000mm x 1050mm x 2100mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2017, Batch mixer, type WBX 150 1 Control unit for the mixer Dodpfoztwbvjx Akmewc 1 Manual shut-off valve 1 Separate control panel ("remote control") Technical data for the 150 series, WBH 150: Parameter | Value Nominal volume | 150 l Usable volume | 105 l A | 1,460 mm B | 670 mm C | 754 mm Empty weight | approx. 270 kg Subject to prior sale Please submit inquiries only by email. Note: The machine is in storage and can be inspected on site. The buyer must arrange for shipping. This is not included in the quoted price.

Condition: used, Year of construction: 2005, functionality: fully functional, Equipment: CE marking, HOMAG OPTIMAT BAZ211 VENTURE 20 (Router No. 5) Year of manufacture: 2005 Basic structure and drives • Machine bed: Heavy-duty, stable design with compact linear guides. • X and Y axis drives: Digital AC servo motors and rack and pinion gears with pre-tensioning for backlash-free operation. • Z axis drive: Digital AC servo motor with ball screw; travel range is 535 mm. • Lubrication: Manual central lubrication for all drives and linear guides. Main spindle and C axis • Power: 11 kW in S6 mode (7.5 kW in S1). • Cooling: Liquid-cooled, vector-controlled asynchronous motor. • Speed range: Continuously programmable from 0 to 18,000 rpm. • Tool holder: HSK F63 according to DIN 69893. • C axis: Equipped with an aggregate interface, pneumatic interface, and 3-point support. Clamping system (Cantilever table) • Cantilevers: 6 pieces with a tubeless, dual-circuit vacuum system. • Stops: 6 longitudinal stops in the cantilevers (stroke 140 mm) and 2 adjustable lateral stops. • Suction cup equipment: • 10x dual-action vacuum suction cups (160x115x100 mm), 4 with integrated lift. • 2x dual-action vacuum suction cups (125x75 mm). • Pneumatics: 4 connections with a single-circuit system for mechanical clamps. Workpiece dimensions • Length (X): Max. 3050 mm (individual setup) or 900 mm (shuttle mode). • Width (Y): Max. 1220 mm for milling; max. 1150 mm for all aggregates. • Thickness (Z): Max. 60 mm with standard suction cups; up to 300 mm including fixtures for top-side milling. • Minimum thickness: 12 mm for chamfering, 16 mm for radius milling. Tool changer and accessories • Type: Disc-type tool changer (12 positions) for HSK F63 tools and aggregates. • Diameter capacity: 12x max. 135 mm, or a combination of 6x 180 mm and 6x 85 mm. • Vacuum system: Liquid ring pump with a capacity of 66 m³/h (equivalent to 100 m³/h for vane pumps). Control system (Power Control PC85) • Hardware: Industrial PC (2 GHz) with 512 MB RAM, a hard drive for data and a second for backup (cloning). Dwedpfx Aozr N H Ujkmec • Software: • woodWOP: Graphical interface for CNC programming. • woodDesign: 3D interface for furniture design. • woodScout (optional): Graphical diagnostic system. • Communication: Ethernet card and modem for remote diagnostics.