Used Iemca Boss 332-E for sale (70,586)

Condition: refurbished (used), Year of construction: 2011, Used automatic hydraulic bandsaw for metal MEP SHARK 332 NC EVO Blade dimensions: 3320x27x0.9mm Mitre angle: from 45° to +60° Operating modes: manual, semi-automatic dynamic, semi-automatic, automatic Cutting speed: 15-100m/min (inverter) Cutting capacity: at 0° - round 300mm - square 260mm - rectangle 330x260mm Dimensions: 2600x2320x2000mm Year of manufacture: 2011 Weight: 1050kg Kdodpfx Ajul Svlei Rer The machine is fully refurbished and tested.

Condition: good (used), LNS EXPRESS 332 installed on TRAUB TNK 36 Very good condition Kodexxh Htspfx Ai Rjdr

Condition: good (used), Fan, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, ventilation blower, exhaust gas extraction, dust extraction blower, dust blower -Fan: centrifugal fan Ø 285 mm Kodpfx Aozulfroi Rjdr -Motor: ABB 0.55 kW -Speed: 2820 rpm -Fan wheel: Ø 285 x 20 mm -Inlet: Ø 110 mm -Air duct connection: Ø 75 mm -Dimensions: 400/350/H380 mm -Weight: 12.4 kg

Year of construction: 2011, condition: good (used), warehouse no.: 503260 Kodpfsx Eifkex Ai Redr type / device: dehumidifying dryer manufacturer: Amboss+Langbein type: Sektionaltrockner H150 year of construction: 2011 The sectional dryers from Amboss+Langbein can be used for energy-saving, stationary and mobile drying. Thanks to the modular system from Amboss+Langbein, the drying system adapts individually to operational requirements and can be implemented in the smallest of spaces. Also available with material station and vacuum system if required. The dryers work with dew point control and energy-saving heat exchangers. Depending on the production requirements, the air throughput is regulated between 140 and 400 m³/h by process control. Each drying boiler has an individual temperature control. A separate scanning of the material to be dried prevents over-drying and insufficient drying Drying due to excessive material removal. Properties: Fully insulated drying container made of V2A stainless steel Sectional multi-boiler system Each dryer boiler individual temperature control Continuous drying Automatic air volume measurement Patented throughput recording and adapted drying Protection against overload and overdrying Dew point controlled (-60 °C tested) Process air control Batch drying Energy-saving heat exchanger Extreme drying of compressed air for electronic component manufacturing

Condition: excellent (used), functionality: fully functional, Key operating parameters and performance: Drying temperature: from 30 °C to 160 °C (adjustable via a precise 3-point controller). Dew point: stable at approximately -60 °C, which ensures thorough drying of hygroscopic materials. Dry air flow rate: from 80 m³/h to 180 m³/h for units in the compact series. Pre-drying time: reduced to just 3–4 hours for standard materials. Throughput: from 4 kg/h to 70 kg/h (values measured for Polyamide PA max). PRICE REDUCTION FROM 1150 TO 950 EUR!!! Kedsy Ud T Rjpfx Ai Rodr

Condition: used, Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, ventilation fan, exhaust gas extraction -Manufacturer: Bossler, radial fan -Type: unfortunately no exact type designation, see photo -Speed: 2820 rpm -Power: 0.55 kW -Protection class: IP 54 Kdsdeuncyaepfx Ai Rjr -Connection input: Ø 155 mm -Dimensions: 300/280/H300mm -Weight: 10.4 kg

Condition: ready for operation (used), Anvil & Stand Length x Width x Height 1000x350x360 mm (dimensions of the anvil) Kodpfjzcqpyox Ai Redr Weight approx. 300 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 2013, Scissor lift table with ramp, platform 1.50 m x 0.77 m, 500 kg – used – : Ex-works price: only €1,250 (net), dismantled, packed, and loaded! Manufacturer: Intraboss Model: ELS 0.5 10-5G-SO Year of manufacture: 2013 Load capacity: 500 kg Kodpfxjwxvznj Ai Redr Platform size: Depth: approx. 1.50 m Width: approx. 0.77 m Overall height: approx. 20 cm Lift height from floor: approx. 1.17 m Own weight: 300 kg 400V, control voltage 24V, 1.1 kW, IP 54 Condition: good Available: immediately Location: Warehouse Frankenberg (Saxony)

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 2.23024635/4097, overall weight: 15 kg, type of input current: AC, power: 1 kW (1.36 HP), tank capacity: 10 l, Motor power: 1 kW Supply voltage: 230 V AC (+/- 10%) Frequency: 50–60 Hz Container volume: approx. 10 liters Conveying capacity: approx. 10–120 kg/h (depending on material and distance) Kdodsy Hkyhepfx Ai Rjr Required compressed air connection: approx. 5 bar (for filter cleaning/control) Device weight: approx. 15 kg Material: stainless steel

Condition: ready for operation (used), Year of construction: 2009, clamping force: 1,000 kN, total width: 1,217 mm, total height: 1,990 mm, overall weight: 4,900 kg, product length (max.): 4,480 mm, Hydraulic injection moulding machine manufactured in 2009. This Negri Bossi BM BIRAGHI SINTESI 100 features a clamping force of 1000 kN and an opening stroke of 370 mm. The machine has a platen size of 610 × 550 mm and a maximum mould height of 450 mm. If you are looking to get high-quality injection moulding capabilities, consider the Negri Bossi BM BIRAGHI SINTESI 100 machine we have for sale. Contact us for further details. Kdedsyzzmzopfx Ai Rer • Opening stroke: 370 mm • Platen size: 610 × 550 mm • Distance between tie bars: 420 × 360 mm • Min/Max mould height: 120 / 450 mm • Ejector force: 34 kN • Ejector stroke: 120 mm • Max mould area (250 bar): 400 cm² • Injection unit (screw options) • 32 mm: L/D 24; injection volume 169 cm³; shot weight (PS) 156 g; injection rate 95 cm³/s; injection pressure 2352 bar; plasticizing capacity (PS) 18 g/s • 37 mm: L/D 21; injection volume 219 cm³; shot weight (PS) 202 g; injection rate 127 cm³/s; injection pressure 1759 bar; plasticizing capacity (PS) 20 g/s • 45 mm: L/D 17; injection volume 324 cm³; shot weight (PS) 298 g; injection rate 188 cm³/s; injection pressure 1189 bar; plasticizing capacity (PS) 22 g/s • General injection data • Screw torque: 440 Nm • Max screw speed: 440 rpm • Barrel heating power: 7.5 kW • Heating zones: 3 + 1 • Nozzle contact force: 49 kN • Electrical and hydraulics • Motor power: 15 kW • Total installed power: 22.5 kW • Hydraulic oil capacity: 150 L • Footprint: 5.4 m²

Condition: ready for operation (used), Year of construction: 2024, clamping force: 3,500 kN, screw diameter: 50 mm, injection weight: 437 g, total width: 2,210 mm, total height: 2,050 mm, overall weight: 18,500 kg, product length (max.): 8,000 mm, Electrical injection moulding machine manufactured in 2024. This Negri Bossi NOVA e350T H1550 features a screw diameter of 50 mm and a clamping force of 3500 kN. It offers a maximum mould opening stroke of 695 mm and a platen size of 1110 × 1200 mm. If you are looking to get high-quality injection moulding capabilities, consider the Negri Bossi NOVA e350T H1550 machine we have for sale. Contact us for further details regarding this machine. • Injection Unit (1550) • Screw L/D ratio: 20 Kdodpfsytgbyjx Ai Rsr • Theoretical injection volume: 480 cm³ • Injection speed: 300 mm/s • Injection rate: 588 cm³/s • Maximum pressure on material: 2100 bar • Holding pressure: 1100 bar • Screw torque: 900 Nm • Screw speed: 250 rpm • Plasticising capacity (PS): 56 g/s • Barrel heating zones: 5 • Heating capacity: 36 kW • Nozzle contact force: 50 kN • Clamping Unit • Locking force: 3850 kN • Max. mould opening stroke: 695 mm • Min–Max mould height: 350–800 mm • Platen size: 1110 × 1200 mm • Tie bar spacing: 820 × 820 mm • Ejector force: 70 kN • Ejector stroke: 200 mm • Power • Total installed power: 216 kW

Condition: excellent (used), Year of construction: 2016, operating hours: 47,000 h, functionality: fully functional, machine/vehicle number: 141-100, clamping force: 3,700 kN, screw diameter: 70 mm, clearance between the columns: 710 mm, displacement volume: 1,175 cm³, injection pressure: 1,400 bar, injection weight: 1,060 g, mold height (min.): 300 mm, opening stroke: 710 mm, plate width: 1,070 mm, plate height: 990 mm, total length: 8,135 mm, total width: 1,890 mm, total height: 2,275 mm, overall weight: 16,000 kg, pump power: 107,000 W, Fully electric Negri Bossi injection moulding machine. Was operational in production until the end. Kdjdpfx Aieyxpd Ae Rsr

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 606300, Year of construction: 2019, operating hours: 3,925 h, load capacity: 3,000 kg, lifting height: 4,500 mm, fuel type: electric, mast type: simplex, construction height: 3,550 mm, No minimum price – guaranteed sale to the highest bidder! Kdodpozu Nklofx Ai Rer TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 4,500 mm MACHINE DETAILS Mast type: Simplex Fuel type: electric Engine power: 2 x 25 kW Battery year of manufacture: 2023 Battery voltage: 80 V Overall height: 3,550 mm Machine weight: 14,900 kg EQUIPMENT Fork positioner Heater Full cabin

Condition: used, axle configuration: 2 axles, first registration: 04/2007, loading space length: 13,450 mm, loading space width: 2,470 mm, loading space height: 2,450 mm, total length: 14,020 mm, total width: 2,600 mm, suspension: air, tire size: 295/60, tire condition: 30 %, wheelbase: 9,100 mm, color: other, Year of construction: 2007, Equipment: ABS, = Additional options and accessories = Kedpfx Aiozvdnuo Rjdr - Air Suspension - Drum brakes = More information = Axle configuration Tyre size: 295/60 Make axles: BPW Tyre profile: 30% Brakes: drum brakes Suspension: air suspension Rear axle 1: Steering Weights Empty weight: 10.920 kg Carrying capacity: 22.080 kg GVW: 33.000 kg Functional Cooling engine: diesel Identification Registration number: OJ-28-TJ

Condition: used, mileage: 332,205 km, power: 338 kW (459.55 HP), first registration: 03/2021, tire size: 315/80 R22,5, axle configuration: 4x2, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, suspension: other, total length: 6,100 mm, total width: 2,550 mm, total height: 3,700 mm, Year of construction: 2021, Equipment: ABS, air conditioning, airbag, cruise control, electric window regulation, fridge, power assisted steering, retarder, spoiler, = Additional options and accessories = Kedpfozvb Hbsx Ai Rsdr - Brake booster - Roof spoiler - Intarder - Air conditioning - Air-suspended seats - Radio/CD player - Sleeper cabin - Sun visor - Immobilizer = Additional information = Fuel type: Natural gas Tire size: 315/80 R22.5 Front axle: Steered; Suspension: Parabolic spring suspension Rear axle: Double tires; Suspension: Air suspension Unladen weight: 6,863 kg Emission class: Euro 6d Reference number: 46

Condition: good (used), functionality: fully functional, machine/vehicle number: 10575, Year of construction: 1995, load capacity: 4,500 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: duplex, motor manufacturer: Briggs & Stratton, overall weight: 9,800 kg, empty load weight: 9,800 kg, total height: 3,500 mm, total length: 5,000 mm, total width: 2,700 mm, Equipment: lighting, A very well-maintained side loader is offered for sale. It is in good technical condition and is a truly robust machine. Ksdpfx Aiszu Stie Redr

Condition: good (used), Year of construction: 2007, functionality: fully functional, cutting length (max.): 6,000 mm, saw blade diameter: 500 mm, saw blade speed: 2,800 rpm, input voltage: 400 V, rotational speed (max.): 2,800 rpm, saw band length: 500 mm, main saw diameter: 500 mm, saw blade length: 6,000 mm, Double automatic aluminum saw with 500 mm blades. Cuts materials up to 6000 mm in length. Can automatically cut an entire profile into smaller pieces. Length, cutting angle, and material thickness are electronically adjusted on the machine. The saw system is in perfect working order. For sale due to production shutdown. Kdedpfx Aiex U Df Hs Rsr We are happy to assist with loading the machine onto the buyer's truck.

Condition: used, empty load weight: 15,000 kg, maximum load weight: 39,895 kg, overall weight: 54,895 kg, axle configuration: 3 axles, first registration: 10/1989, loading space length: 13,600 mm, loading space width: 2,750 mm, loading space height: 650 mm, total length: 14,850 mm, total width: 2,750 mm, total height: 3,500 mm, suspension: air, tire size: 8.25R15, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 3 axles, BPW axles, air suspension, forced steering, lift and lower function, lashing eyes, two-part loading ramps, hydraulic ramps. Superstructure: hydraulically liftable low-bed trailer, hydraulic ramps. The trailer was partially overhauled in 2009 for EUR 11,000: NEW FLOOR, etc., and has not been used since. It can be widened from 2750 mm to 3250 mm. Loading length in the low-bed = 5850 mm, loading length over axles = 4250 mm, loading height over gooseneck approx.: 1620 mm, over loading area approx.: 650 mm, over axles approx.: 940 mm. 1/3 of the low-bed can be hydraulically raised! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Kjdsi Rqi Sjpfx Ai Rsdr

Condition: good (used), functionality: fully functional, Year of construction: 2019, operating hours: 14,287 h, load capacity: 1,800 kg, lifting height: 4,620 mm, fuel type: electric, mast type: triplex, construction height: 2,150 mm, battery voltage: 48 V, fork length: 1,200 mm, tire condition: 65 %, Equipment: UVV, lighting, pallet forks, Description & special equipment: good tyres, good battery 70%, fork positioner, sideshift. Note: The forklift is in good condition. Kdjdpfeyzzz Sjx Ai Ror The machine is currently located at our site in Bad Krozingen. Transport to your location can be arranged at an additional cost. An invoice with VAT shown will be sent to the buyer and the stated prices are net.

Condition: used, diameter / mm boring diameter / mm - / Ksdpfxoyk Ilns Ai Rsdr total power requirement / kW weight of the machine ca. / t required space / m dividing head Chuck DH 130 x 4 II / TGL 30 2332 Exact dimensions available upon request.

Condition: good (used), Bar feeder, automatic bar loader for CNC lathe, brand Iemca, model Kid 80, year 2016. Kdjdpoy N R Ttefx Ai Ror

Condition: new, functionality: fully functional, mileage: 0 km, color: red, empty load weight: 2,050 kg, maximum load weight: 650 kg, lifting height: 3,330 mm, digging bucket width: 1,160 mm, Year of construction: 2025, Equipment: pallet forks, standard shovel, TECHNICAL DATA: Model: VOLT 600 Payload (kg): 650 Unladen weight (kg): 2050 Bucket volume (m³): 0.25 Maximum steering angle: ±45° Turning radius (mm): 2050 Rear axle oscillation angle: 19° Full cycle time (s): 8 Operating time (h): 6 Speed (km/h): Slow: 10 km/h, Fast: 20 km/h Dumping height (mm): 2170 Lifting height (mm): 3330 Dimensions (mm): 3810 × 1260 × 2270 Dumping reach (mm): 405 Bucket width (mm): 1160 Wheelbase (mm): 1380 Track width (mm): 890 Ground clearance (mm): 200 BATTERY: Model: 3-EVF-200 Type: Maintenance-free lead-acid battery Quantity: 12 Capacity (kW): 14.4 Nominal voltage (V): 72 Charging time (h): 8 System voltage (V): 12 Electrical system: AC Kodpfx Ajw Ufplji Rjdr MOTOR: Voltage (V): 72 Power (kW): 5 Displacement (ml/r): 23 Nominal speed (rpm): Slow: 800 rpm Fast: 2200 rpm System pressure (MPa): 16 Hydraulic system: Steering type: Fully hydraulic steering System pressure (MPa): 14 Steering pump: 5–125 Cylinder size (mm): 63 × 190 mm Number of cylinders: 1 DRIVE: System: AC Voltage (V): 72 Power (kW): 4 × 2 Number of motors: 2 Tyres: 26×12.00–12 Tyre pressure (MPa): 0.25 PRICE: €14,500 net €17,255 gross KINGWAY DEUTSCHLAND is the exclusive stationary distributor of the Kingway brand in Germany. Here you can inspect and test all machines on-site. We are the largest importer of construction and agricultural machinery in Europe and the main branch of Kingway in Germany. We have a vast selection of machines in stock, with around 100 units available at any given time. We deliver machinery throughout Germany, Austria, Switzerland, Italy, and other neighboring countries, and provide our customers with access to all spare parts as well as a mobile service. KINGWAY DEUTSCHLAND e. K. Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), color: red, overall weight: 4,500 kg, empty load weight: 3,000 kg, maximum load weight: 1,500 kg, Year of construction: 2025, FARMER 815T The modern telescopic loader FARMER 815T – professional and robust. The FARMER 815T model is the ideal machine for agricultural operations, construction companies, electricians, installers, renovation firms, and service providers in similar sectors. We also guarantee customer support even after the warranty period has expired. The loaders are manufactured under supervision of European technicians and based on European technology. The machine is built on a stable chassis and can perform reliably under all conditions. The comfortable, glazed cab ensures safe and pleasant working conditions. TECHNICAL DATA: Model: FARMER 815T Total weight: 3000 kg Overall dimensions (L×W×H): 4100×1520×2450 mm Rated bucket capacity: 0.25 m³ Maximum lifting capacity: 1500 kg Dump height: 2200–3000 mm Lifting height: 3450 mm Discharge height (maximum reach when dumping): 700 mm Wheelbase: 2100 mm Track width: 1405 mm Rear chassis articulation angle: 8° Maximum steering angle: 31° Total cycle time: 11 s ENGINE: Model: YUNNEI Power: 25 HP Type: Direct injection, horizontal, water-cooled, 4-stroke, 3-cylinder Rated output: 18.8 kW Rated speed: 2400 rpm Minimum fuel consumption: ≤1800 g/kW·h HYDRAULIC SYSTEM: Working pressure: 18 MPa Boom lifting time: 4 s Kodpfsxp Ibxox Ai Redr Total boom lift/lower time: 7 s Fuel tank capacity: 55 l Hydraulic tank capacity: 65 l Automatic leveling: YES DRIVE SYSTEM: Standard: Fully hydraulic Transmission type: Fixed-axle, constant mesh gearbox Gear range: 2 forward gears / 2 reverse gears Maximum speed: 22 km/h BRAKE SYSTEM: Service brake: Foot-operated, drum brake (mechanical) Parking brake: Hand-operated, disc brake (mechanical) TYRES: Standard tyres: 31×15.5-15 Optional tyres: 19.0/45-17/MP Tyre pressure front: 320 kPa Tyre pressure rear: 320 kPa PRICE: €21,700 net €25,823 gross KINGWAY DEUTSCHLAND is the exclusive point-of-sale distributor for the Kingway brand in Germany. Here, you can inspect and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and the Kingway headquarters in Germany. We have a huge selection in stock, with around 100 machines available at any time. We deliver machines throughout Germany, Austria, Switzerland, Italy, and other neighboring countries, and we offer our customers access to all spare parts and mobile service. KINGWAY DEUTSCHLAND Jakub Dylus 84098 Hohenthann Gambacherstr. 4 STOCK: Untergambach 10 84098 Hohenthann

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), fuel tank capacity: 15 l, color: grey, empty load weight: 1,200 kg, shovel volume: 0.3 m³, Year of construction: 2025, operating hours: 1 h, The YAMA S15 LITE crawler excavator – modern, professional, and durable. The YAMA S15 LITE model is the ideal machine for demanding construction, electrical, plumbing, and renovation companies as well as service providers in similar sectors. The YAMA S15 LITE is also equipped with a swing boom, significantly facilitating work in confined spaces. We also offer post-warranty service support. The mini excavators are designed and manufactured under the supervision of European engineers. The robust construction ensures reliable operation under all conditions. TECHNICAL DATA: Operating weight: 1,200 kg Bucket volume (set with 3 buckets): 0.03 m³ Engine model: LAIDONG Engine power: 18.4 kW / 25 HP Number of cylinders: 3 Oil cooler: Yes Swing arm: Yes Extendable tracks: No Max. gradeability: 35° Pump type: Gear pump System pressure: 16 MPa Hydraulic flow: 25 l/min Max. travel speed: 2 km/h Platform rotation speed: 9–10 rpm Digging force: 13 kN Ground pressure: 30 kPa Fuel tank capacity: 15 l DIMENSIONS: Overall length: 2,870 mm Overall width: 1,000 mm Overall height: 2,150 mm Blade width: 1,000 mm Blade height: 220 mm Track gauge: 800 mm Track width: 180 mm Ground clearance: 380 mm Standard bucket width: 380 mm Total track length: 1,300 mm WORKING RANGE: Max. digging height: 2,740 mm Max. dumping height: 1,750 mm Max. digging depth: 1,800 mm Max. vertical digging depth: 1,320 mm Max. reach at ground level: 2,400 mm Minimum swing radius: 1,550 mm Max. digging radius at ground level: 3,227 mm Max. blade lift height: 325 mm Max. blade lowering depth: 175 mm PRICE: €10,400 net €12,376 gross Kjdpfowzh A Nox Ai Rjdr

Condition: new, functionality: fully functional, power: 55 kW (74.78 HP), fuel type: diesel, color: red, overall weight: 7,500 kg, operation weight: 5,500 kg, maximum load weight: 2,000 kg, Year of construction: 2025, The 825T model is the ideal machine for the most demanding construction, electrical, hydraulic, renovation companies, and service providers in related industries. It is built on a robust frame and can be operated under any conditions. The comfortable, glazed cabin ensures safe and pleasant operation. The machine boasts an impressive lifting height of 4.8 meters! PERFORMANCE: Rated load capacity: 2,000 kg Total weight: 5,500 kg Rated bucket capacity: 1.2 m³ Maximum traction force: ≥34 kN Maximum breakout force: ≥51 kN Maximum climbing ability: 30° Maximum dumping height: 4,006 mm Maximum dumping reach: 854 mm Overall dimensions (L×W×H): 6,200 × 2,100 × 2,580 mm Minimum turning radius: 4,043 mm ENGINE: Standard model: YUNEI DEF20CAF4 Type: Vertical, inline engine, water-cooled, 4-stroke diesel Number of cylinders – Bore/Stroke: 4 — 100 × 125 mm Rated power: 55 kW Max. torque: 250 N·m Minimum specific fuel consumption: ≤243 g/kW·h DRIVELINE: Torque converter: YJ1—26501 Transmission: Intermediate shaft, power-shift type Gear range: 2 forward, 2 reverse Maximum speed: 20 km/h Drive axles: Main reduction – spiral bevel, single-stage Reduction type: Planetary, single-stage Wheelbase: 2,551 mm Track width: 1,650 mm Ground clearance: 310 mm HYDRAULIC SYSTEM: Operating pressure: 16 MPa Arm lift time: 4.8 s ± 0.2 s Full cycle: 9.2 s ± 0.5 s Fuel tank volume: 80 L Automatic leveling function: Yes BRAKE SYSTEM: Service brake: Disc brakes on all four wheels Parking brake: Hand brake TYRES: Type and size: 16/70-20 Front tire pressure: 0.22 MPa Rear tire pressure: 0.22 MPa PRICE: €30,500 net €36,295 gross WARRANTY: - Each machine carries a 12-month warranty, which can be extended by an additional two years. - After the warranty period, we ensure our customers have access to all spare parts. SERVICE: - We have our own mobile service team that reaches all our customers throughout Germany and abroad. KINGWAY is Europe's largest and leading importer of construction and agricultural machinery. For 25 years, we have been active in the European market, importing and selling between 3,000 and 4,000 machines annually, earning the trust of numerous customers. KINGWAY DEUTSCHLAND is the only stationary distributor of the Kingway brand in Germany. Only here can you visit and test all of our machines on site. We are the largest importer of construction and agricultural machinery in Europe and the main Kingway branch in Germany. We have a vast selection of machines in stock, with about 100 units available at any time. We deliver throughout Germany, Austria, Switzerland, Italy and other neighboring countries. We also offer full access to parts and mobile services for our customers. KINGWAY DEUTSCHLAND Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 Ksdpsxcv Hijfx Ai Rsdr 84098 Hohenthann