Used Iemca Kid 80 for sale (18,028)

Condition: used, TECHNICAL DETAILS - Bar diameter : 45 [mm] Tsdpfx Aozbnb Rontob - Bar length : 3800 [mm] - Max. scrap length : 150 [mm] - Loading time : 22 [sec] POWER SUPPLY - Supply voltage : 400 [V]

Condition: used, TECHNICAL DETAILS - Bar diameter : 45 [mm] Tedpfx Aozbncbsnteb - Bar length : 3800 [mm] - Max. scrap length : 150 [mm] - Loading time : 22 [sec] POWER SUPPLY - Supply voltage : 400 [V]

Condition: used, functionality: fully functional, Manufacturer: TOS Type: H 80 Todpfozwmrfex Anteb Spindle diameter: 80 mm Spindle travel: 700 mm Spindle taper: Morse taper 5 (MT5) Table size: 1100 x 890 mm / 1120 x 900 mm (X / Y / Z): 1000 mm, 1000 mm, travel: 1100 mm

Condition: excellent (used), Year of construction: 2009, operating hours: 35,808 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 204 cm³, injection pressure: 1,860 bar, injection weight: 186 g, Here we offer the following well-maintained used injection moulding machine as an injection moulding machine dealer: Of course, we also purchase well-maintained injection moulding machines from the 2010 model year onwards. We have been a wholesale dealer for injection moulding machines for over 25 years. Manufacturer: KraussMaffei Model: KM EX 80-380 (fully electric) Serial number: 61013142 Year of manufacture: 2009 Operating hours: 35,808 h Control system: MC 5 Fully functional Condition: very well maintained Machine comes from original German ownership xxxxx without robot / without temperature control unit xxxxx Extras: - Pneumatic needle shut-off nozzle - 1 pneumatic valve on BWAP - Pneumatic control for 1 hot runner - Pneumatic control for hot runner/cold runner - Reject chute - Nozzle guard door – ejector area safety door foldable - Euromap 18 interface on FWAP Tjdpfxoyrd U Us Antjb - Electrically actuated ejector plate in BWAP - Hydraulic auxiliary unit for core pulls - Injection-compression control - 2 x hydraulic core pulls (on BWAP and FWAP) - Pressure relief for core pulls on BWAP and FWAP - Water manifold, 8 circuits - 8 heating zones for hot runner - Extrusion injection circuit with position control - 3 x 230V sockets, 2 x CEE 16A / 1 x CEE 32A - EUROMAP 67 signal interface for robot - Start-up sequence, quality assurance package, cycle time analysis, cycle memory, event protocol - BluePOWER package: energy consumption display - Graphics analysis package, trend chart - Interface for temperature control unit - Cycle time analysis, actual cycle time optimization Injection unit: Screw diameter: 40 mm Shot weight: 186 g / PS Injection pressure: 1,860 bar Shot volume: 204 cm³ Clamping unit: Clamping force: 80 t / 800 kN Tie bar spacing: 420 x 420 mm Platen size: 655 x 670 mm Mould installation height: 250 mm Max. platen gap: 750 mm Ejector stroke/force: 100 mm / 22 kN Clamping unit fully electric Warranty: Warranty until first commissioning Loading/Shipping: Free loading onto buyer’s truck or free delivery within Germany against reimbursement of freight charges Available from our warehouse in Hannover, Germany

Condition: used, Engine and transmission for GRM 80 – according to the previous owner, the transmission was overhauled and has not been used since. Todpfx Aszw I Hqsntsb ATTENTION!! This offer includes only the engine and transmission!

Condition: excellent (used), Year of construction: 2007, clamping force: 350 kN, screw diameter: 22 mm, clearance between the columns: 280 mm, injection pressure: 2,061 bar, injection weight: 37 g, ejector stroke: 100 mm, Clamping force: 35t Year of manufacture: 2007 Injection weight: 37g Injection unit 80 Screw diameter: 22 mm Specific injection pressure: 2061 bar Injection volume: 42 ccm Injection weight: 37 g Todpjzt Itcsfx Antjb Screw L/D ratio: 20 Tool closing system 35 Clamping force: 35 t Tool plate dimensions: 390x390 mm Distance between columns: 280x280 mm Ejector force: 26 kN Ejector stroke: 100 mm Weight: 2200 kg Control system: MC4 Equipment: - Hydraulic core - Pneumatic valve

Condition: good (used), Year of construction: 2008, For sale: 1 unit Scherer VDZ 80 DS with the following technical specifications: Tsdpfx Anszvniiotsb Swing diameter: 120 mm Z-axis (vertical): 265 mm X-axis (horizontal): 280 mm Front bearing diameter: 85 mm Rear bearing diameter: 75 mm 2 x A4 spindle Spindle drive unit rated power: 16.8 kW Rated torque: 100 Nm Speed: 1,000 – 7,000 rpm Travel speed Z-axis: max. 30 m/min Travel speed X-axis: max. 30 m/min Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Weight: 9,000 kg Complete documentation available. Note: The system will likely require some reprogramming, as it was previously integrated into a complete processing line. However, a stand-alone program is available. Transportation and loading can be organized Europe-wide at extra cost upon request. Prices are subject to VAT. Inspection possible by appointment. Please contact us; our team will be happy to assist you. Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, MACHINE TOOLS, AND MORE. Are you looking for a high-quality yet affordable machine for your production? Or do you wish to sell your machine? For further information or contact options, please reach us via the contact form.

Condition: good (used), punching/shearing machine GEKA Hydracrop 80/A Angle 130 x 130 x 13 mm Flat bar 450 x 15 mm Round bar 45 mm Square bar 45 mm Punch ø40 x 14mm Double-acting Equipped with an automatic side stop Tsdpfx Aezurz Hjntob Weight approximately: 2500 kg

Condition: used, functionality: fully functional, machine/vehicle number: 512044006074, Year of construction: 2004, operating hours: 9,813 h, load capacity: 2,000 kg, lifting height: 4,335 mm, free lift: 1,515 mm, fuel type: electric, mast type: triplex, construction height: 2,000 mm, empty load weight: 3,711 kg, total length: 2,120 mm, drive type: Elektro, construction width: 1,000 mm, Electric 3-wheel forklift Chassis number: 512044006074 Load center: 500 Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Description: German: Still R20-20 No.: R0817 Year of manufacture: 2004 Operating hours: not specified Lifting capacity: 2,000 kg Lifting height: 4,335 mm Overall height: 2,000 mm Free lift: 1,515 mm Mast: Triplex Battery: 48 V Battery: A refurbished battery with at least 80% remaining capacity will be installed upon purchase. As the battery will only be installed at the time of sale, no photo of the battery that will ultimately be supplied is currently available. Equipment: Side shift, fork positioner, 3rd and 4th valve, StVZO road equipment, front and rear work lights, rotating beacon and rear-view mirror. Charger available upon request. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right machine, please contact us. We have a large selection of additional equipment available on site. English: Still R20-20 No.: R0817 Year of manufacture: 2004 Operating hours: not specified Lifting capacity: 2,000 kg Lifting height: 4,335 mm Overall height: 2,000 mm Free lift: 1,515 mm Mast: Triplex Battery: 48 V Battery: A refurbished battery with at least 80% remaining capacity will be installed upon purchase. As the battery will only be installed at the time of sale, no photo of the battery that will ultimately be supplied is currently available. Equipment: Side shift, fork positioner, third and fourth hydraulic valve, StVZO road equipment, front and rear work lights, rotating beacon and rear-view mirror. Charger available upon request. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right machine, please contact us. We have a large selection of additional equipment available on site. Side shift, fork positioner, Todpozwyfrjfx Antob 3rd valve, 4th valve, rear work light, front work light, StVZO, interior mirror, rotating beacon, 3-wheel.

Condition: used, TECHNICAL DETAILS - Bar diameter : 5 - 51 [mm] - Bar length : 3200 [mm] Tsdpjym D Sijfx Antjb POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 4080 x 1200 [mm] - Machine height : 1750 [mm] - Machine weight : 830 [kg]

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: SFV 80-N, Included with the machine: Tsdpfx Aozuwcpjntob A wide selection of different forming dies for packaging timber products with various cross-sections. Machine documentation and operating manuals. Suitable for packaging planed timber and various other wood products. The machine can be inspected and tested on-site: Observe the machine in operation. Perform a test run. Inspect the operation of the rollers, chains, and other mechanisms. Inspect all included forming dies. The machine is operating correctly and is ready for production.

Condition: ready for operation (used), Scharmann - WB 80 / Heidenhain digital display ND 780 Tsdpfxoztyi No Antjb -Travel ranges X/Y/Z 1300x1200x1200mm -Heidenhain digital display -Rotary table - 1200x1200mm -Table load max. 5 tons -Spindle mount MK5 -Automatic feeds 0.053-6.35mm -Rapid traverses -Spindle speeds 24-2880 rpm -Coolant system -Various accessories / tool holders etc. Errors and omissions excepted.

Condition: used, Year of construction: 2004, Milling machines Travel distance X: 880 mm Travel distance Y :630 mm Todpfx Anozwqvnsteb Travel distance Z: 630 mm HSC-machines Number of axis: 5 milling machine / machining center Control: Heidenhain iTNC 530 table size X: 1250 mm table size Y: 700 mm tool changer: 32 - time Torque: 130 Nm control Heidenhain Universal machining center NC rotary table (C-axis) integrated into rigid table Swivel milling head (B-axis) SK40 tool holder Tool magazine: 32 (2x16 positions) Cooling unit Rotary table: 700 mm Max. table load: approx. 500 kg Speed range - main spindle: 20 - 12,000 rpm Feed rates: 20 - 15,000 mm/min Torque: 130 Nm Machine weight approx.: 9.0 tons Machine dimensions approx.: 4.0 x 3.0 x 2.5 meters

Condition: good (used), -KOM 3005- We offer here a used bar feeder for lathes. Technical data Machine dimensions: (w x d x h) approx. 3850 x 700 x 1300 mm Power connection / control voltage: 220 Volt / 50 Hz Machine no.: 90042033 Remarks: Tedpfourldcjx Antjb The machine is under power in our warehouse and is ready for demonstration

Condition: refurbished (used), Year of construction: 2014, Technical specifications Product number A80 Year of manufacture 2014 Machine dimensions: 830 x 880 x 840 mm Rotation: Left, Right Weight: approx. 130 kg Protection rating: IP 69 Capacity: 80 l Model A 80 Capacity: 80 liters, 50/55 kg product Stainless steel construction Mixing arm with a single blade Forward and reverse mixing 3-phase motor power: 415 V 50 Hz 1.0 kW Tedpfezvrnvjx Antsb Manual discharge with tilting Cover with safety lock Motor with frequency inverter Machine has undergone a complete overhaul and is ready for operation.

Year of construction: 1979, operating hours: 500 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 123, We are selling a Bosch Höller 3 edge-sealing machine that underwent a general overhaul in 2022. The machine has been fully converted to servo drive and fitted with an S7 control system. Coloured or clear film is fed via a roller, folded into a bag measuring 11 cm wide by 15 cm high, and sealed. The grippers can be individually adjusted within the frame as required. Product feeding is via a screw feeder, which also operates fully electrically with all standard parameters. The machine is fully operational. Depending on the product to be filled, speeds of 40–60 bags per minute can be achieved. Todpfxoizag To Antsb

Condition: used, Bar Feeder, Automatic Bar Feeder, Used Machine Manufacturer: IEMCA Model: Master 100 F/R Overall Dimensions: Width: 4900 mm Depth: 1115 mm Tedpfsxab Adjx Antsb Height: 1800 mm Weight: 2200 kg Year of Manufacture: 2012 Electrical Data: 400V; 8.4A Bar Diameter Range: 10–100 mm Bar Length: 1100–4200 mm Maximum Bar Weight: 180 kg Maximum Feeding Speed: 500 mm/sec Magazine Types: UP: 500 mm usable length MP: 290–330 mm F: 2.5-ton stacked magazine Changeover Time: 31 seconds Installed Power: 1.5–3 kW Pneumatic System Pressure: 6 bar

Condition: good (used), functionality: fully functional, machine/vehicle number: Nr.72.092.010, spindle bore: 12 mm, Iemca CS112 No.72.092.010 Iemca Bar Feeder and Motor Round bars Ø 1 - 12.7 mm (3/64" - 1/2") Supplied with guide sets for 4 mm and 12 mm and with 2 motors for Tornos M4 For 3 m bar lengths ON CLEARANCE SALE REDUCED PRICE! Hexagonal bars Ø 1.3 - 11 mm (3/64" - 7/16") Capacity: 28 bars Ø 7.5 mm - 16 bars Ø 12.7 mm Min. bar change time: 26 sec. (with 3200 mm bars) (mod. 32) Feed speed: 1000 mm/sec. Return speed: 1600 mm/sec. Supply voltage: 230/400 volts Installed power: 1.8 kW Tsdpforn I Dfox Antsb

Condition: used, A professional Meiko DV 80 T dishwasher, ideal for the catering industry or large kitchens. This powerful conveyor dishwasher is known for its reliability and efficiency. The machine comes complete with the necessary racks and accessories, as shown in the photos. Perfect for intensive use and a fast washing cycle. The dishwasher has been used, but is in good condition and ready for its next owner. Please contact us for more information or to arrange a viewing. Tedpfezv Sc Tsx Antsb

Condition: good (used), Year of construction: 2004, For sale are 2 units of Scherer VDZ 80 DS with the following technical specifications: Swing diameter: 120 mm Z axis (vertical): 265 mm X axis (horizontal): 280 mm Front bearing diameter: 85 mm Rear bearing diameter: 75 mm 2 x A4 spindle Spindle drive rated power: 16.8 kW Rated torque: 100 Nm Speed range: 1000 - 7000 rpm Traverse speed Z axis: max. 30 m/min Traverse speed X axis: max. 30 m/min Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Weight: 9000 kg Complete documentation available. Attention! The system will likely need some reprogramming as it was part of a complete production line. However, an individual program is available. Todpjzvnh Ssfx Antob On request, transport and loading can be organized throughout Europe for an additional charge. Prices are subject to VAT. Inspection possible by appointment. Please contact us; our team looks forward to assisting you. Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Are you looking for a high-quality yet affordable machine for your production? Or do you want to sell yours? For more information or contact options, please reach us via the contact form.

Condition: good (used), Year of construction: 2001, bar diameter (min.): 3 mm, bar diameter (max.): 32 mm, - Guide channel (oil-damped) - max. bar length 3,200 mm - included guide channel: D 21 mm - material pusher length L - centering device - synchronization unit Tjdpsy N Tiqofx Anteb - last mounted on a sliding head automatic lathe - weight approx. 800 kg - dimensions LxWxH 4,000x700x1,200 mm

Condition: used, mileage: 652,000 km, power: 315 kW (428.28 HP), first registration: 02/2014, fuel type: diesel, overall weight: 27,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, total length: 11,110 mm, total width: 2,600 mm, total height: 4,000 mm, Year of construction: 2014, Equipment: tail-lift, Information in English: VOLVO FH 420 6X2 GLOBETROTTER HEIWO BOX THERMO KING UT-800 DHOLLANDIA 3,000 KG LIFTGATE Type: Heiwo fully insulated box Date of first registration: MOT valid until: - 26 Mileage: 652,000 km Engine power: 315 kW (428 hp) Transmission: Automatic Dimensions (L x W x H): 875 x 250 x 272 cm (internal) Unladen weight: 14,690 kg Todpfxjzw Sp As Antsb Payload: 13,310 kg Permissible total weight: 28,000 kg Color: White Suspension: Front axle parabolic, axle 2 air-suspended, axle 3 air-suspended Emission class: EURO 6 Axle configuration: 6x2 Steering axle: Yes, axles 1 and 3, the last axle can also be lifted Front tires: 385/55 R22.5 L90% R90% Tires axle 2: 315/70 R22.5 L60% R60% Tires axle 3: 385/55 R22.5 L80% R80% Tail lift: Dhollandia 3,000 kg tailgate Refrigeration: Thermo King T-800, powered by diesel and electricity (380 V). Refrigeration hours: total (diesel and electric) Cab type: Globetrotter Extras: Smart tachograph, Globetrotter cab, 9-ton front axle, steerable and liftable tag axle, air conditioning, auxiliary heater, Thermo King T-800 refrigeration system with only 2,384 diesel and 1,165 electric operating hours (diesel and electric operation), temperature range from -29 to +30 degrees Celsius, 3-ton tail lift with cab operation, 5 floor/ceiling rails, fully insulated cargo compartment by Heiwo, stainless steel tailgate, separate batteries for the body, cruise control, trailer coupling with light and air connections, camera, 700-liter aluminum diesel tank, various additional lights, 4 reversing lights, complete maintenance history available, immediately available and ready for use. SUITABLE FOR: 16 block pallets and a concrete pump truck 21 EURO pallets 14 auction cars 27 DANISH CARDS Further information: * Payload: 12,310 kg * Type | Front axle: Semperit R * Tire size | Front axle: 385/55 R22.5 * Tire tread depth inside left | Front axle: 90% * Tire tread depth inside right | Front axle: 90% * Maximum axle load | Front axle: 8,000 kg * Type | Second axle: Michelin R * Type | Third axle: Semperit R * Tire size | Second axle: 315/70 R22.5 * Tire size | Third axle: 385/55 R22.5 * Tire tread depth outside left | Second axle: 60% * Tire tread depth inside left | Second axle: 60% * Tire tread depth inside left | Third axle: 80% * Tire tread depth outside right | Second axle: 60% * Tire tread depth inside right | Second axle: 60% * Tire tread depth inside right | Third axle: 80% * Maximum axle load | Second axle: 11,500 kg * Maximum axle load | Third axle: 7,500 kg * Wheelbase: 697 cm * Tail lift | Manufacturer: Dhollandia * Tail lift | Load capacity: 3,000 kg * Price on request: Yes * Position | Front axle: Front * Brand | Front axle: Other * Brake type | Front axle: Disc brakes * Suspension | Front axle: Parabolic springs * Steering | Front axle: Yes * Position | Second axle: Rear * Position | Third axle: Rear * Brand | Second axle: Other * Brand | Third axle: Other * Brake type | Second axle: Disc brakes * Brake type | Third axle: Disc brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension * Reduction | Second axle: Single reduction * Lift axle | Third axle: Yes * Twin tires | Second axle: Yes * Driven | Second axle: Yes * Steering | Third axle: Yes * Differential lock | Second axle: Yes Semtrade B.V. Contact | Martin Klaaijsen |

Condition: used, TECHNICAL DETAILS Tjdpoykb Uvjfx Antsb - Bar diameter : 40 [mm] - Bar length : 4200 [mm] - Max. scrap length : 150 [mm] - Loading time : 22 [sec] POWER SUPPLY - Supply voltage : 400 [V]

Condition: used, Year of construction: 1976, Drum speed: 4500/min, drum diameter: 650mm, permissible density of centrifuged material, heavy liquid: 1,1kg/dm³, solids: 1,3kg/dm³, control panel: Siemens SIMATIC HMI. Maintenance was carried out every two years by a specialist company, new control system installed two years ago, very good condition, no maintenance backlog, with documentation. An on-site inspection is possible. Tedpfx Ajzun S Ijntob

Condition: used, Year of construction: 2020, Industrial bandsaw CENTAURO SUPERCUT 80 BANDSAW FOR THIN SLICES WITH THE HIGHEST PRECISION The major advantages of a compact and versatile machine for all applications in the field of thin slicing: Thin slicing from 2 mm material thickness Maximum cutting accuracy up to 0.15 mm Minimum cutting kerf from 1.3 mm Ideal for cutting dry and wet wood as well as alternative materials The surface of the thin lamella can be glued directly, without any further post-processing being required User-friendly electronic control Two programmable feed speeds of the conveyor belt from 0 to 30 m/min for optimal cutting quality and a longer service life of the saw blade Optical sensor for starting the cutting cycle and for automatic speed switching Ground work table Flexam feed belt for optimal performance 6 height-adjustable rubber pressure rollers, whose position can be adjusted to open/close, in order to ensure the optimal pneumatic clamping pressure on the workpiece during the feed and cutting process Oleopneumatic saw blade tension for optimal cutting performance Upper and lower Chaco saw blade guides, which ensure optimal stability of the saw blade during the cutting process Internal and external lubrication of the saw blade for removing resin residues and chips 4 dust extraction connections to optimize the extraction of dust and chips Maximum cutting height 400 mm (optional 500 mm) Maximum cutting width 400 mm Powerful quality motor with 15 kW (20 hp) Ethernet interface for online service and remote maintenance Carbide or stellite saw blades for optimal cutting performance Tjdpfozvflnsx Antob Maintenance-friendly design and easy service