Used Immunodiagnostic Analyzer for sale (115)

Year of construction: 2020, condition: new, Use of one photocell Using one photocell in the space of workpiece allows you to measure the length of the workpiece and, consequently, gives you the opportunity to turn on the guns when the item is in range, and to switch off the gun immediately after the workpiece is finished. The photocell is included in the standard equipment.Identification of details using special tags. Lodpfsfy T Arsx Akuerl A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus braking the energy and powder coating. Vertical detection of the detail of the workpiece. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. Application of light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to manipulate the manipulators. Benefits of using gates and photocells The benefits of using photocells or light gates are primarily energy and powder savings. Eliminate painting of a zone in which there is no detail. With the use of light gates, precise control of the guns. Our lines can be optionally equipped with photocells, or light gates Using one photocell in the workpiece space allows you to measure the length of the workpiece and, consequently, gives you the ability to turn on guns when the item appears in their range, and turn off the gun immediately after the workpiece is finished.Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus saving the energy and powder.The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time in which the detail will appear in the gun space - allowing guns to be selectively switched on or off.Using of light gates with multiple sensors horizontally and vertically This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to adjusting the manipulators.The benefits of using photocells or light gates are primarily powder and energy savings Eliminate painting of a zone in which there is no detail With the use of light gates, precise control of the guns The PLC counts the time at which the detail should appear in the gun space - allowing guns to be selectively switched on or off.

Year of construction: 2020, condition: new, Automation Use of one photocell Using one photocell in the space of workpiece allows you to measure the length of the workpiece and, consequently, gives you the opportunity to turn on the guns when the item is in range, and to switch off the gun immediately after the workpiece is finished. The photocell is included in the standard equipme Array of guns Vertical 8pcs. pistols Control - profiControl 10 " Cyclone - CK-D1250 Dust collector - OZ-8H Center - RP-01 + SV-200 MA1-23 x 2 pcs manipulator Os X MX-100 x2 pcs. Horizontal goal - Horizontal goal W400 x2 items Vertical gate - H2000 vertical gate The maximum painting speed is 1,65714285714286m / min 0 piece pulling machines Pow. requires 10188m3 / h to fly Required min. cabin passage W900mm H2100mm Pipe diameter 500mm - 16.9m / s minimum 16m / s Air consumption 1210 L / min + Sug. SC-20 compressor Lodpfxoflq Spe Akusrl Min.current connection 28.14 kW Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus braking the energy and powder coating. Vertical detection of the detail of the workpiece. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time at which the detail should appear in the gun space - allowing guns to be selectively switched on or off. Application of light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to manipulate the manipulators. Benefits of using gates and photocells The benefits of using photocells or light gates are primarily energy and powder savings. Eliminate painting of a zone in which there is no detail. With the use of light gates, precise control of the guns. Our lines can be optionally equipped with photocells, or light gates Using one photocell in the workpiece space allows you to measure the length of the workpiece and, consequently, gives you the ability to turn on guns when the item appears in their range, and turn off the gun immediately after the workpiece is finished. Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus saving the energy and powder. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time in which the detail will appear in the gun space - allowing guns to be selectively switched on or off. Using of light gates with multiple sensors horizontally and vertically This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to adjusting the manipulators. The benefits of using photocells or light gates are primarily powder and energy savings Eliminate painting of a zone in which there is no detail With the use of light gates, precise control of the guns.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. Lredpjfz Dt Nsfx Akujl - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. Lodpfsfz I D Dsx Akusrl In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators. Lredpofz I Edjfx Akusl

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations Lrsdoflmdwjpfx Akusl The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). Lodpfx Akjfz Nb Tousrl - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. Lodpfofz U S Eox Akusrl This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: excellent (used), Year of construction: 2024, operating hours: 50 h, Lamella Production Machine The automatic acoustic panel stapler is equipped with an advanced three-axis NC control system, providing exceptional precision and flexibility in the manufacturing process. Below are the detailed advantages of each axis: 1. X-Axis: Precise Stapler Positioning Along the Horizontal Axis - The X-axis ensures accurate horizontal positioning of the staplers along the panel. This guarantees that staples are precisely applied at designated points, ensuring consistent stitching quality across the entire length of the panel, regardless of its size. 2. Y-Axis: Vertical Movement - The Y-axis allows vertical movement of the stapler, enabling stapling at various locations on the panel, regardless of its dimensions or shape. This enables the stapler to work with non-standard sized panels while maintaining full accuracy. Lrodpfxsy Sw I Ne Akusl 3. Z-Axis: Depth and Stapling Force Control - The Z-axis controls the depth and force with which the staples are driven into the panel. This allows the process to be precisely adjusted according to the thickness and hardness of the acoustic panel material. As a result, staples are embedded with optimal strength, ensuring the durability and aesthetics of the finished product while minimizing the risk of material damage. ### Automatic Changeover Automatic changeover is a key feature that significantly enhances production efficiency. With this function: - Changeover of the X, Y, and Z axes is fully automatic. ### Production Process Optimization Integration with production management systems such as MES (Manufacturing Execution System) and ERP (Enterprise Resource Planning) enables: 1. Full Control Over the Manufacturing Process: - Thanks to MES and ERP integration, every stage of production can be fully monitored and managed. 2. Optimization of Media and Material Consumption: 3. Optimization of Production Plans: ### Significant Relief for Operators Automation of the acoustic panel stapling process directly reduces manual workload: - Elimination of manual control requirements - Increased work efficiency ### Capability to Develop Algorithms for Media Demand Analysis Thanks to advanced integration with manufacturing management systems, the stapler allows for the creation of sophisticated algorithms to analyze production media demand: 1. Media Demand Analysis: 2. Adapting Production to Variable Conditions: ### OEE (Overall Equipment Effectiveness) Analysis The stapler also facilitates advanced OEE analysis, a key performance indicator in production operations: 1. Comprehensive Production Monitoring: 2. Automatic OEE Calculation: - The MES system automatically calculates the OEE value based on collected data, allowing immediate assessment of the stapler’s operational efficiency. This tool enables rapid identification of areas requiring optimization, such as downtime reduction, product quality improvement, or machine performance enhancement. 3. Early Detection of Problematic Areas: 4. Optimization of Production Plans: ### TPM (Total Productive Maintenance) and Automated Condition Monitoring The stapler also supports the implementation of TPM philosophy, focusing on maximizing machine efficiency and reliability...

Condition: used, functionality: unexamined, Complete metal testing and materials testing laboratory Industrial quality assurance/testing laboratory as a complete package A fully equipped professional metal and materials testing laboratory from the industrial QA sector is for sale. The package includes, among others: OES metal analysis, universal testing machine, technical cleanliness analysis according to VDA 19 / ISO 16232, metallography equipment, hardness testing, coating thickness measurement, laboratory scales, water analysis, laboratory devices, extensive Köttermann laboratory furnishings, and consumables. Manufacturers include: AMETEK/SPECTRO, GALDABINI, JOMESA, Struers, Fischer, List, Ernst, Zeiss, KERN, Mettler, IKA, Memmert, Macherey-Nagel, Hanna, WTW, and Köttermann. Key features: - AMETEK / SPECTRO SPECTROTEST TXC02 UV portable OES metal analyzer - GALDABINI QUASAR 100 universal testing machine / tensile tester 100 kN - JOMESA filter analysis system for technical cleanliness in accordance with VDA 19 / ISO 16232 - Struers TransPol-5 portable metallographic grinding and polishing system - Struers Rotopol-2 metallographic grinding and polishing machine - Fischer DELTASCOPE FMP30 coating thickness measuring system - List-Magnetik MEGA-CHECK Master coating thickness gauge - Ernst Computest SC portable hardness testing system - Carl Zeiss Jena Neophot metallographic reflected light microscope - Köttermann fume hoods, laboratory benches, hazardous materials cabinets, and chemical cabinets - Extensive laboratory consumables, laboratory glassware, and accessories Ljdoy Rglnjpfx Akuorl Complete object description can be found in the documents.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 23352279, type of input current: three-phase, input voltage: 400 V, total width: 600 mm, total length: 1,600 mm, total height: 2,150 mm, overall weight: 460 kg, power: 5.5 kW (7.48 HP), compressed air connection: 6 bar, Equipment: documentation/manual, type plate available, SICK MCS 100FT/F CEMS System (2023) - Unused / Zero Hours - QAL1 Certified Available for immediate sale: A complete, unused (zero hours) Continuous Emission Monitoring System (CEMS) SICK MCS 100FT/F, manufactured in October 2023. This is a turn-key solution featuring advanced multi-component analysis technology. Key Technical Specifications: - FTIR Technology: Simultaneous measurement of SO2, NO, NO2, CO, CO2, HCl, HF, and H2O - FID (TOC) Analyzer: Integrated total organic carbon measurement - Zirconia Sensor: Integrated O2 measurement - Certification: Fully QAL1 certified (EN 15267 compliant) - Acid Mist Protection: Includes special cabinet with Acid Mist Absorber Box (ideal for H2SO4 protection during petcoke combustion) Lredpfjy A Nu Ajx Akujl Complete Package Includes: - SICK MCS 100FT/F Analyzer Cabinet - Sampling Probe - 20m Heated Sampling Line - MEAC/DAU Data Acquisition System Condition: Brand New / Unused Availability: Immediate (Ex-stock) Ideal for cement and lime plants, refineries, and power generation facilities looking for a high-end upgrade without the manufacturer's lead time. FAT reports and technical manuals are available upon request.

Condition: excellent (used), For sale: Hioki CT6711 – precision current probe, designed for accurate current measurements in laboratory, R&D, service, and industrial applications. The CT6711 model allows safe, non-invasive current measurement with high resolution and an extremely wide bandwidth, ideal for use with oscilloscopes and power analyzers. Key features: • Current range up to 30 A • Bandwidth up to 120 MHz • High measurement accuracy and stability • Fast range switching • Demag / Auto Zero functions • Robust, professional construction • Manufactured in Japan Condition: Lrjdpfsyc Idbjx Akuol • Fully functional • Very good cosmetic condition • Equipment removed from laboratory / industrial use Included: • Hioki CT6711 current probe • Control unit • Full set of cables • Original carrying case • Manufacturer’s documentation (manuals) Ready-to-use device – no hidden defects. Applications: • AC/DC current measurements • Power electronics • Research and development (R&D) • Inverter, power supply, and drive servicing • Laboratories and maintenance departments

Condition: used, functionality: fully functional, Precise Defect Identification The Optyx sorting platforms are characterized by exceptional color, shape, size and texture recognition. High resolution Vis/IR, Tri-chromatic, or UV cameras ensure even the subtlest defects are identified and targeted for removal increasing quality. Precise Removal of Defects and Foreign Material The intelligent ejection system features precision pneumatic-based valves with exceptional response time for pinpoint accuracy. Unparalleled yield improvement can be achieved with the optional three-way sorting. Intelligent Sorting Advanced object-based image processing allows FMAlert™ to track foreign material providing you with a digital record. Custom algorithms determine shape, length, width, curvature, symmetry, circularity and other special characteristics improving quality. Using cameras, Optyx recognizes the size and shape of each object, as well as millions of subtle color differences. As the product passes through the sorter, it inspects it from above while on the conveyor belt. The product is then moved to the end of the Optyx conveyor for an overhead view from below. Using proprietary image processing technology designed specifically for dates, the sorter quickly analyzes the images, comparing each item to previously defined standards as accepted or rejected. When the sorter identifies objects to separate from the main product section, it activates the ejector system, comprised of a series of air valves that reach the full width of the system. As the air is expelled, the valves identify each object to be separated and removed from the main product section. Features & Benefits • Multiple camera configurations to match product requirements • High Resolution Vis/IR, UV or Tri-chromatic camera options Lsdownxupspfx Akusrl • HID, UV, & LED lighting options • Simple, user-friendly operation, cleaning and maintenance • Easy adjustment for product change over • Wet or dry products. Typical Applications Potatoes (chips, whole, strips, sliced, diced, wedges), fruits, nuts, vegetables, cereal, confectionery, dry beans, fresh-cut (including core removal), raisins, snack foods, wet or dry products. Sorting Excellence Green bean processors use an Optyx 3000 to re-sort the defect streams of other sorters to increase yields. Output. 6 TN metric/H = 13,000 lbs/h = 5,896 kg/h. Production may vary depending on the product. Work measures: Long tape: 2.20 m. Tape width: 0.66 m Download: 1.22 m.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: MW141, Technical characteristics: Work area # Maximum turning diameter: 300 mm # Maximum workpiece length: 276 mm # X-axis travel: 250 mm / Rapid traverse X: 24 m/min # Z-axis travel: 460 mm / Rapid traverse Z: 24 m/min # W-axis travel: 520 mm / Rapid traverse W: 24 m/min Main Spindle # Spindle mount: A2-8 # Maximum spindle speed: Left 3000 rpm # Continuous power (100% duty cycle): Left - 15 kW / Right - 7.5 kW # Max workpiece diameter over bed: 520 mm # C-axis indexing accuracy: 0.001° # Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Counter-Spindle: Lodpfx Akexxifkjusrl # Spindle speed: 6000 rpm # Max bar diameter: 53 mm # C-axis indexing accuracy: 0.001° # Travel: 520 mm Motorized Tool Turret # Tool interface: Okuma interface # Number of stations: 12-position lower turret, all stations powered # Maximum speed: 4500 rpm, Milling motor power: 4.5 kW Electrical equipment # Supply voltage: 400V 3-phase # Connected load: 22.5 kVA Dimensions # Machine dimensions (L×W×H): 3200 × 2200 × 1900 mm; Weight: 5500 kg Main features and capabilities: # Horizontal design: optimal chip evacuation, parts catcher + custom parts conveyor belt # Additional coolant tank with 10 bar pressure for cutting tool cooling # CNC control: OSP-P300L-R # Chip conveyor # Fire protection system # Tool measuring system (Q SETTER) # Broken tool detection: Load force auto-learning analyzer managed by OSP-P300L-R # Workpiece detection on counter-spindle: Low-pressure compressed air sensors # Spindle cooling system # Documentation: Available electronically and as hardcopy Optional: Bar feeder: FMB model Turbo 10-72XT/3200/A # Bar feeder dimensions (L×W×H): 3500 × 800 × 1200 mm; Weight: 1500 kg Machine status: In operation

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: MW137, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left 3,000 rpm - Continuous power (100% duty cycle): Left - 15 kW / Right - 7.5 kW - Maximum swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Counter-Spindle - Spindle speed: 6,000 rpm - Maximum bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Tool Turret with Driven Tools - Tool interface: Okuma interface - Number of positions: 12 lower turret stations, all driven - Maximum speed: 4,500 rpm; Milling spindle power: 4.5 kW Electrical Equipment - Operating voltage: 400V (3-phase), fuse protection: 151A - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3,200 × 2,200 × 1,900 mm; Weight: 5,500 kg Main Features and Capabilities: - Horizontal design: Optimal chip evacuation, parts catcher + custom-made conveyor belt - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Swarf (chip) extraction conveyor Ledpfx Akoxxh Udouerl - Fire suppression system - Tool measuring system (Q SETTER) - Broken tool detection: Load monitoring with auto-learning analyzer via OSP-P300L-R - Workpiece detection on counter-spindle: Low-pressure compressed air gauges - Spindle cooling system - Documentation: Electronic and print manual available Optional: - Bar feeder: FMB Model: Turbo 10-72XT/3200/A - Bar feeder dimensions (L×W×H): 3,500 × 800 × 1,200 mm; Weight: 1,500 kg Machine status: NOT OPERATIONAL - X-axis encoder: faulty

Condition: used, Year of construction: 2015, functionality: limited functionality, machine/vehicle number: MW130, Technical characteristics: Work Area Lredpfsxxrbbsx Akujl - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse W: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left 3,000 rpm - Continuous power (100% duty cycle): Left – 15 kW / Right – 7.5 kW - Maximum swing over bed: 520 mm - C-axis positioning accuracy: 0.001° - Bar capacity: Left spindle – 80 mm / Right spindle – 53 mm Counter-Spindle: - Spindle speed: 6,000 rpm - Maximum bar diameter: 53 mm - C-axis positioning accuracy: 0.001° - Travel: 520 mm Turret with Driven Tools - Tool interface: Okuma interface - Number of stations: 12-station lower turret, all positions driven - Maximum milling speed: 4,500 rpm - Milling motor power: 4.5 kW Electrical Equipment - Operating voltage: 400V, 3-phase, fuse: 151 A - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3,200 × 2,200 × 1,900 mm - Weight: 5,500 kg Main Features and Capabilities: - Horizontal construction: Optimal chip evacuation, parts catcher + custom parts conveyor belt - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measuring system (Q SETTER) - Broken tool detection system: Load monitoring auto-learning analyzer controlled by OSP-P300L-R - Workpiece detection on counter-spindle: Low-pressure compressed air gauges - Spindle cooling system - Documentation: Available electronically and as a hard copy Machine status: Operative only with main spindle – sub spindle requires repair Optional Equipment - Bar feeder: TopAutomazione model FU352 - Bar feeder dimensions (L×W×H): 3,500 × 800 × 1,200 mm - Weight: 1,500 kg

Condition: used, Year of construction: 2017, functionality: limited functionality, machine/vehicle number: MW149, Technical specifications: Work Area Ledpfx Aksxxiiijusrl - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left spindle 3000 rpm - Continuous power (100% duty cycle): Left spindle – 15 kW / Right spindle – 7.5 kW - Maximum swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle – 80 mm / Right spindle – 53 mm Sub-Spindle (Counter Spindle) - Spindle speed: 6000 rpm - Maximum bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Turret with Driven Tools - Tool interface: Okuma interface - Number of stations: 12-position lower turret, all driven stations - Maximum speed: 4500 rpm, Milling motor power: 4.5 kW Electrical System - Operating voltage: 400V 3-phase, fuse protection 151A - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3200 × 2200 × 1900 mm - Weight: 5500 kg Main Features and Capabilities: - Horizontal design for optimal chip evacuation - Parts catcher and custom-made parts conveyor strip - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measurement system (Q SETTER) - Broken tool detection: Load force auto learning analyzer, controlled by OSP-P300L-R - Part detection at sub spindle with low-pressure compressed air gauges - Spindle cooling system - Documentation: available electronically and as manual Option: Bar feeder: TopAutomazione FU352SX - Bar feeder dimensions (L×W×H): 3500 × 800 × 1200 mm - Weight: 1500 kg Machine status: Machine operational only with main spindle – sub spindle requires repair.

Condition: used, Year of construction: 2016, functionality: limited functionality, machine/vehicle number: MW127, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Max. speed: Left spindle 3000 rpm - Power at 100% duty cycle: Left spindle - 15 kW / Right spindle - 7.5 kW - Max. swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Counter-Spindle: - Spindle speed: 6000 rpm - Max. bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Tool Holder with Driven Tools - Tool interface: Okuma interface - Number of tool stations: 12-position lower turret, all positions driven - Max. speed: 4500 rpm / Milling motor power: 4.5 kW Electrical Equipment - Operating voltage: 400V 3-phase, fused at 151A - Connected load: 22.5 kVA Machine Dimensions - Dimensions (L×W×H): 3200 × 2200 × 1900 mm - Weight: 5500 kg Main Features and Capabilities - Horizontal design: optimized chip evacuation, parts catcher and custom-made parts conveyor - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measuring system (Q Setter) - Broken tool detection: Load force auto-learning analyzer controlled by OSP-P300L-R - Part detection at counter spindle: low-pressure compressed air gauges - Spindle cooling system - Documentation: Available electronically and in printed format Machine Status: Currently operating with main spindle only - sub spindle requires repair OPTIONAL: Bar feeder: TopAutomazione model Fu352 SX - Bar feeder dimensions (L×W×H): 3500 × 800 × 1200 mm - Weight: 1500 kg Ljdpexxihfjfx Akujrl

Condition: used, Year of construction: 2008, Overview This Ishida IX-GA-4075-D X-ray inspection system was manufactured in 2008 and is designed for high-performance product inspection in food, beverage, and pharmaceutical production environments. The system is primarily used for foreign body detection, identifying contaminants such as metal, glass, stones, and high-density plastics that may not be detected by conventional metal detectors. In addition to contamination detection, the machine can also support product integrity checks, such as identifying missing components or estimating product consistency. The system is built with a robust stainless steel construction, making it suitable for industrial environments with high hygiene requirements. The inspection process is based on X-ray imaging, where products pass through the inspection chamber via conveyor. The system analyzes density differences in real time and automatically triggers a reject mechanism if contamination is detected. Technical Data Construction: Stainless steel frame for hygienic industrial use HMI: Integrated touchscreen for operation, calibration, and product changeover Electrical Data Power supply: AC 230 V, single phase Current: 11.0 A Frequency: 50 / 60 Hz Inspection Function Detection of foreign bodies: Metal Glass Stones High-density plastics Additional capabilities: Product integrity verification Detection of missing components Density-based inspection Lrodpfoyzc D Ujx Akuol

Condition: used, CFS CombiGrind 2000/250 grinder-mixer Capacity: 2000 l Throat diameter: 250 mm Power: 75 kW Electrical supply: 400 V 50 Hz Dimensions: 3200 mm x 1900 mm x 2800 mm Lrsdpey Alwgefx Akuol Equipped with an infrared MultiTrack analyzer. It analyzes fat, protein, and water content in meat.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 226735, type of input current: AC, input voltage: 230 V, Equipment: type plate available, Qualification, commissioning and troubleshooting – intuitive, flexible, fast High data transfer rates of up to 10 Gbit/s Ethernet and new Power-over-Ethernet applications up to 90 W present entirely new challenges for structured cabling. The NetXpert XG2 offers comprehensive active and passive network testing up to 10 Gbit/s for the qualification, commissioning, and troubleshooting of copper and fiber optic cabling. Featuring the largest touch display in its device class, the NetXpert XG2 guarantees user-friendly operation and a clear presentation of results. At the same time, the NetXpert XG2 ensures maximum reliability of results thanks to the unique combination of up to four different testing methods for analyzing a data link. Flexible, scalable model range – upgradable from 1 to 10 Gbit/s The NetXpert XG2 and XG2-PLUS qualify twisted pair cabling from 1 to 10 Gbit/s. With their unique combination of four measurement methods, these devices verify whether your cabling can support interference-free Ethernet transmission up to 10 Gbit/s. The NetXpert XG2 is available in its base version from 1 Gbit/s and can be upgraded to 10 Gbit/s. The NetXpert XG2-PLUS comes fully equipped to also qualify fiber optic cabling up to 10 Gbit/s. SPECIFICATIONS – ALL VERSIONS Copper Interface 1 x Cat 6A RJ45, replaceable Fiber Interface 2 x SFP slot, 1 - 10 Gbit/s; (SFP modules to be ordered separately!) Length measurement technology TDR (Time Domain Reflectometry) and capacitive Cabling test and ID Up to 305 m Split-pair detection: 1 m to 305 m Length measurement: 0 to 457 m, ± (5%+30 cm) Distance to fault (short circuit): 0 to 200 m ± (5% + 1 m) Compatible with 8 pass-through test and up to 24 ID remote units (RJ45) (ID remote units only) Power over Ethernet (PoE) Tests according to IEEE 802.3af PoE (Type 1, max 15.4 W), IEEE 802.3at PoE+ (Type 2, 30 W) and 802.3bt PoE++ (Type 4, 90 W) Max. voltage Maximum voltage that can be applied to any two test inputs without damaging the tester: RJ-45: 60 VDC or 50 VAC Memory capacity Stores an unlimited number of cable or network tests per project with custom names Tone generator Tone frequencies: 730 Hz and 11.440 Hz Languages English, German, French, Spanish, Italian Battery Li-Ion, 7.2 VDC, 6.2 Ah / up to 4 hours (typical) External power supply 12VDC Permissible temperatures Operation: -10° to 60 °C Storage: -30° to 70 °C Permissible humidity 10% to 90%, non-condensing Housing Plastic injection-molded Display 7" TFT-LCD color display with capacitive touchscreen, 1024 x 600 resolution (WSVGA) Dimensions Lredpfxsygwayo Akusl 245 x 177 x 73 mm (main unit) 130 x 177 x 55 mm (active remote) Weight with batteries 1.2 kg (main unit) 0.6 kg (active remote)

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, workpiece weight (max.): 100 kg, total width: 320 mm, total length: 640 mm, total height: 540 mm, Axioplan 2 Imaging, a universal all-in-one solution adaptable to any application. A flexible, future-oriented microscope system, controllable via computer or manually, capable of digital image capture and storage, and able to communicate with other systems – truly a digital microscope from A to Z. Eight filter positions with a full 25 mm field of view, easily accessible in a compact reflector turret: This means top performance without compromise and offers space for a wide range of filter combinations, Optovar modules, multi-channel fluorescence, and a DIC analyzer. Includes attachment for the AXIOPLAN photomicroscope. Lredsytr Acspfx Akujl

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, Scratch testing device for characterizing the adhesion and scratch resistance of thin coatings and bulk materials The scratch testing method involves scoring the surface with a diamond tip under a constant or progressive load. During the scratch process, the specimen moves under the video system to examine the various types of damages caused by the tip and correlate them with the applied load. The images can be digitized and precisely mapped onto emission, acoustic, and load diagrams. This standard procedure enables the comparison of different coatings, substrates, coating thicknesses, surface preparations, and the scratch resistance of bulk materials. Features include an acoustic emission sensor, multi-pass scratch function (repeated scratching along the same track), friction force measurement, and the 2018 upgrade: new illumination system with analyzer, polarizer, 2 apertures and filters, plus high-resolution INFINITY 5X and 20X objectives, and lens holder with adjustment screws for easy tip/microscope calibration. Lodeytrufjpfx Akuerl Includes calibration set for table speed and applied load sensor.

Year of construction: 2025, condition: new, ProdMa Sp. z o. o. specializes in stainless steel processing and configures stainless steel machines according to the customer's requirements and capacities. Efficiency, high productivity, and good customer communication are our top priorities. Accordingly, we focus on existing machines on the market, analyzing and optimizing problem areas to ensure complete customer satisfaction. Here we offer the CB-80: Height: 2,000 mm Width: 1,120 mm Length: 4,890 mm Weight: approx. 800 kg Ljdperci U Hjfx Akuorl Power: 50 Hz 360 V Power consumption: 1.64 kW Air pressure consumption: 1 m3/10 bar / 1 min. Peeling: 40 - 80 pieces / min Peeling diameter: 35 - 100 mm of unsorted onions

Year of construction: 2014, condition: good (used), Mechatronics RPU-2100R Reagent Production Unit The Mechatronics RPU-2100R is a reagent production unit used in hematology to optimize reagent logistics in laboratories. The unit is manufactured by RR Mechatronics and is often used in combination with hematology analyzers from Sysmex. Purpose and Function The RPU-2100R (Reagent Production Unit) is used to automatically dilute concentrated reagents (such as Cellpack S Conc.) and produce large quantities of ready-to-use reagent on-site in the laboratory. The RPU-2100R is a standalone unit with all components housed in a single, enclosed enclosure. The enclosure features removable, epoxy-coated metal covers. All external connections and the ON/OFF switch are located on the rear of the unit. All user-serviceable and replaceable components are accessible via the front door. The cart for the Cellpack concentrate (e.g., Cellpack®-S Conc.) can be attached to any three sides of the unit. Features and Capacities The RPU-2100R focuses on optimizing reagent management for high-throughput laboratories: Reagent Concentrates: Uses Cellpack S Conc. in 10L and 20L containers. Throughput per Concentrate: Up to 8,250 complete blood counts per month can be performed with a 10L container without reagent changes. Up to 16,500 complete blood counts per month are possible with a 20L container. Shelf Life: Once opened, the reconstituted reagent has a shelf life of 30 days. Manufacturer: RR Mechatronics Model: RPU-2100R Catalog Number: NARP109010 External Connections Power Supply, Euro Plug Ethernet/USB (NARP109010 only) RJ45/USB-B RS-232 (NARP109000 only) 9-Pin SUB D Connector External Connections (Liquids) Water Connection: G ¾" Thread Reagent Dispensing Connections (4x) Push-in Hose Connection, 6 mm Outer Diameter Waste Connection (1x) Hose Barb, 12 mm Inner Diameter Reagent Concentrate Maximum Dimensions: 390 x 260 x 300 mm (W x D x H) Reagent: SYSMEX Cellpack Concentrate Peak Reagent Dispensing Rate: 0.5 Liters/Minute for 6 Minutes max. (at (with full reservoir and overflow tank and new pre-filter) 1 liter/minute, 2 minutes max. Filtration: Air filter, bacteria filter, pore size 0.2 µm Liquid pre-filter: Particle filter (sterilized), pore size 0.8+0.45 µm, self-venting Liquid final filter: Bacteria filter (sterilized), pore size 0.2 µm, self-venting System dimensions: Width: 500 mm Height: 700 mm Depth: 430 mm Ledpfxoyk U Dws Akujrl Weight: approx. 50 kg Water tank volume: 2.5 liters Reservoir: 2.5 liters Mixing tank: 0.6 liters Overflow tank: 0.6 liters Language selection available: German, English, Spanish, French, Hungarian, Italian, Dutch, Swedish Swedish (spreadable) Voltage: 230 VAC (+/- 10%) Frequency: 50-60 Hz Year of manufacture: 2014 Find more items – new and used – in our shop! International shipping costs available upon request!