Used Inverter Welding Machine for sale (66,784)

Condition: excellent (used), Year of construction: 1996, ESAB LHF 400 Welding Rectifier / Electrode Welder Infinitely variable welding current range up to 400 A, power 400 A at 35% duty cycle, 315 A at 60% duty cycle, weight 165 kg, ... Siegfried Volz Machine Tools Blodpfjv N Hkcox Ad Ajg Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Welding current range - 200 A Weight: 158 kg Accessories / Special features: Bodpefkpgdjfx Ad Aslg - separate ESAB A 10 wire feed unit with 2-roll wire feeder - including hose package and ground cable Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel / Germany

Year of construction: 2025, condition: new, Operates with 3 Phase 400V-50/60 Hz mains voltage and generators, tolerates voltage fluctuations up to 15%. Due to inverter technology, energy efficiency is higher than the conventional machines. Excellent welding characteristics with all types of solid and flux cored wires with CO2 or Mix gases. 4 Wheel Drive system, offers very powerful feedability for longer torches and offers less deformation on soft wires such as aluminum and flux cored wires. Bledeyx Hpiopfx Ad Aeg Welding voltage, wire feed speed (welding current) is adjusted from the panel in front of the wire feeder. Optimum welding parameters can be obtained from the printed table inside of the wire feed cabinet. Manual wire feeding & gas valve buttons, Trigger Mode (2/4), Spot mode are available on the wire feeder. Soft Start, Pre-gas, Post-gas, Crater Filling, Burn-Back, Flow Sensor settings are adjusted from the digital panel of the wire feeding system. ø300 mm, ø270 mm and ø200 mm spools and drums of any size can be used. 24V AC outlet for CO2 gas heater. Built in gas cylinder platform with large wheels to ease mobility in workshops. The Separate wire feeder standard harness length is 5 m and can be extended up to 30 m upon request (M-MW models). Protected against voltage fluctuations. Designed also for outdoor use, protection class is IP 23. Water cooling unit for water cooled torches provides powerful cooling even at very hot climates. (Water-cooled (W) models) Standard accessories come with the machine.

Condition: used, Shielding Gas Welding Machine MIG-O-MAT Type U 405 Serial No. Year of manufacture 1991 Output 400 amps = 60% duty cycle 280 amps = 100% duty cycle Adjustment range 18 steps Torch hose length 5 meters Power supply 380 V, 50 Hz, 32 amp plug - Spot and interval welding function - 2-stroke and 4-stroke welding functions - Wire feed with 2-roller drive - Water-cooled - Shielding gas pressure regulator - Supplied with 1.2 mm welding wire Dimensions L x W x H: 1300 x 500 x 900 mm Weight approx. 200 kg Blsdpfx Aoyy Dfqjd Aog In good condition

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, Equipment: type plate available, Year of manufacture 1994, modernized by the machine manufacturer KUKA in 2012. The system is equipped with a turning unit, bead punching unit, and a tube feed unit for unloading the welded components. We can adapt this system according to customer requirements. A complete retrofit is also possible. Bodpfsx I Efbjx Ad Ajlg

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, The machine is almost new, coming from a company liquidation. Bledpfeyl R U Iox Ad Aeg

Condition: as good as new (ex-display), ⭐ FRONIUS TPS 4000 ⭐ Fully equipped Device description/scope of delivery: Fronius TPS 4000 fully equipped device - you can't get more than this! - Pulse 400 Ampere power source - FK 4000 FC cooling unit with optional filter including flow control (==>if no water circulates, the device shuts down to protect the hose package). - VR 4000 with optional rollers underneath + long connecting hose package + metal feed rollers - only the best of the best. Bedpfxovlwh De Ad Aslg - Fronius Aw5000 hose package with Job Master function on the torch (==>display on the torch / amperes, job, feed, arc adjustable on the torch) Photo = scope of delivery. All prices quoted are starting from prices. Prices are calculated individually according to your configuration requirements. New price approx. €15,000 (net). We are offering it for 1/3 the new price. Not comparable to Transsteel junk. Why buy from us rather than from anyone else: - We are professionals when it comes to this Fronius welding machine series. We always have around 60-80 units in stock. Only these Fronius devices, not other manufacturers! - We don't just push the devices through; we disassemble them, test them, replace wear parts, and only sell them when everything is working perfectly. - All our devices are sold with the popular Fronius welding torches. NOT a 100-euro buy-it torch, but QUALITY! The Fronius welding torches cost between 650 and 900 euros net, depending on the configuration! - Our devices are "all" clean and don't have burn holes in the displays or countless burn holes/dents scattered throughout the device! You're buying an item from us that's worth seeing and doesn't look completely finished! - It's worth buying from us. - As our customer, you have the opportunity to obtain suitable spare parts and support at reasonable prices if necessary. - You will receive a proper invoice with VAT shown. All devices can be inspected, paid for, and picked up at our main warehouse in Vienna by appointment! Insured shipping on pallets is of course possible! All prices are starting from £100. You can configure the devices with us. Robot device or handheld device. Long or short connecting hose package. A wide variety of hose packages to choose from. Synchropuls. 270, 400, or 500 amp devices in stock. CMT version available as handheld or robot. It's best to call us. We'll discuss your application and give you an initial price estimate.

Condition: new, Year of construction: 2026, A compact device using the FIBER technology, designed for welding many types of metals with precision far exceeding traditional welding methods. Advanced technological solutions used in the offered welding machine allow to perform high-quality and repeatable welding welds of thin-walled materials and parts without the risk of deformation. Advantages of a laser welding machine Easy to use - thanks to the applied solutions and well-thought-out structure, the operator can start working after a short training Low indirect radiation, when working, it is enough to wear protective glasses to filter strong light, Welding much faster than with traditional methods, productivity can be increased by up to 3 to 10 times Concentrated beam: slight structure change due to the small heat-affected area, The repeatability of the welds, the welding seam is nice, the welds are high strength. Very thin materials such as 0.5mm stainless steel can be welded. Option of welding with or without wire. Bljdpfx Adjizr Rlj Asg Technical parameters Maximum power 2000W Laser wavelength 1080nm Depth of penetration (stainless steel 1 m/min) 4.57mm Depth of penetration (black steel 1 m/min) 3.59mm Depth of penetration (aluminum 1 m/min) 4.0mm Depth of penetration (brass 1 m/min) 4.0mm Welding speed 0-120mm/s Automatic Wire Feeder Ø 0.8 - 1.6mm Maximum power consumption ≤6.0kW Cooling system aqua Working voltage 400V Shielding gas consumption 20L/min Dimensions 600 x 1100 x 1100mm Weight approx. 185 kg LATEST GENERATION WELDING HEAD WOBBLE head; Automatic wire feeder included; Adjustable spot size 0-5mm; The powerful welding head allows many types of beam guidance: -, ○, ◎, ⊙, 8, ∞; Integrated connections for shielding gases and cooling system, Interchangeable nozzles allow for welding at different angles, 10 m of optical fiber that connects the head to the source, Adjustment of welding parameters directly in the head without having to go to the control panel; Full ergonomics - thanks to the light and flexible design, the head can perform welds even in hard-to-reach places; Easy to service - quick and easy replacement of the protective lens. Automatic wire feeder included The wire feeding system is synchronized with the welding machine software. The task of the feeder is to feed the filling, thanks to which the operator can focus 100% on the work of the head. Set includes laser welding machine with built-in cooling system welding gun with adjustable focus and a set of accessories Fiber laser source automatic wire feeder set of cables starter kit of nozzles and protective glasses THICKNESS OF WELDED MATERIALS Material WELDER POWER 1000W 1500W 2000W Stainless steel 0.5-3.0mm 0.5-4.0mm 0.5-5.0mm Black steel 0.5-2.5mm 0.5-3.5mm 0.5-4.5mm Galvanized steel 0.5-2.5mm 0.5-3.0mm 0.5-4.0mm Aluminum 0.5-1.2mm 0.5-1.8mm 0.5-4.0mm Brass 0.5-1.2mm 0.5-1.8mm 0.5-2.5mm

Condition: good (used), Year of construction: 2013, functionality: fully functional, For sale: Due to changes in our manufacturing division and a production conversion, we are selling a micro plasma welding unit at short notice. * Castolin Micro GAP 50 DC / Micro Plasma Welding Unit * Year of manufacture: 2013 * Blodpfsw A Iltox Ad Aog Description: For professional use in industrial and craft sectors. * The Micro GAP 50 DC is ideal for welding tasks requiring precision, high-quality layer properties, and low dilution; especially when fully automatic welding is not appropriate or feasible due to small batch sizes or a variety of tasks. The welding units are available with various equipment features. Operation is via push-button selectors and rotary controls on the front display. The Micro GAP 50 DC is designed for manual and semi-automatic welding applications where frequent parameter adjustments are necessary. All settings are clearly shown on the LCD display in plain text. Up to 100 memory slots are available for storing welding parameters. The highly efficient inverter delivers 33 A at 100% duty cycle, which is sufficient for various micro plasma welding tasks. * Condition: Used, very good, little used. Original price (net): €13,995 * - Complete with accessories and documentation (see photos) - Without gas cylinder - Without base cart – this can be purchased optionally for €300. * IMPORTANT: For logistical reasons, we sell only within Europe. The buyer is responsible for removal, loading, and transportation. * "The seller excludes any warranty for the purchased item. The item is sold as-is, without any guarantee for fitness for a specific purpose or freedom from defects. The buyer confirms that the item was inspected before purchase and is satisfied with its condition. The seller assumes no liability for any damages resulting from the use of the item. Any claims by the buyer against the seller are excluded." * Status: 31.03.2026 * Price: €2,900 negotiable / plus VAT Prices are net plus VAT * For any questions or further information, feel free to contact me.

Condition: used, Insertable welding controller in 19" housing, type NPS 8043-1 IQ1, with quality assurance and 50 programs. Solenoid valve voltage: 24 V DC. Complete with MB 260 current measuring strap. ADDITIONAL CONTROLLER MODULES IN STOCK: e.g. 8036 - 8036-S3, 8033, 8043, MPS 200 R1, RATIA 43a, HWS 2202 Profil IQ. Bledpfx Ajdga Nbed Aog

Condition: ready for operation (used), Merkle W 420 AC/DC TIG Insquare welding machine / welding system Technical data can be found in image no. 2 Bedpfxju Hg Aqj Ad Aolg You are welcome to arrange a viewing appointment. We can also organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid is available. Sale subject to prior sale. Visit our shop and check out our other offers as well. Company names and trademarks mentioned are the property of their respective owners and are used solely for identification and product description purposes. Deviations from technical data and errors in the item description may occur and are subject to change.

Condition: excellent (used), foot-operated, water-cooled rocker arm spot welding machine Brand: DALEX Model: easyspot 35 Rated power at 50% duty cycle: 25 kVA Secondary short-circuit current: 22.4 kA Secondary open-circuit voltage: 5.1 V Electrode force: 17-278 daN Arm spacing: 140 or 300 mm Throat depth: 180-500 mm with attached control cabinet according to VDE 0100 Bledpfx Adoyxp Rpe Asg Synchronous welding control Main switch

Condition: used, MIG MAG welding machine, shielding gas welder CLOOS type GLC 357 N MIG MAG welding power source Serial no. 576 Year of manufacture approx. 1985 Rated output 350 Amp. Output 350 Amp. - 80% duty cycle Bedpehubg Tofx Ad Ajlg 310 Amp. - 100% duty cycle Continuously adjustable output range Connection hose package: 4.5 meters Power supply: 380 Volt, 50 Hz, 32 Amp plug - 2-stroke and 4-stroke welding function - External wire feeder type CK 72 ZK with 2-roller drive and 4.5 meter hose package - 3 meter hose package with central connection and CLOOS hand torch - Water-cooled - Pressure gauge for gas cylinder - Welding unit equipped with 1 mm welding wire Space requirements (L x W x H): 1250 x 600 x 1100 mm Weight: 260 kg Machine tested – fully functional

Condition: used, Spot welding pliers with DALEX RS 17 control unit and balancer Spot welding pliers DALEX Type A 3139 Serial number: 98G 69757 Year of manufacture: 1998 Rated power at 50% duty cycle: 8 kVA Maximum welding power: 22.4 kVA Open-circuit voltage: 2.9 Volts Maximum electrode force: 200 daN Maximum short-circuit current: 9.5 kA Cooling water flow: 1.5 l/min Power supply: 400 Volt, 50 Hz Throat depth: 250 mm Arm spacing: 120 mm Electrode holder diameter: 12 mm Spot electrode diameter: 6/12.5 mm Electrode gap: max. 230 mm - Pliers with water cooling (without cooling unit) - cooling water requirement 1.5 l/min. - Suspension device: DALEX balancer Type D4-21 Weight of welding pliers: 15.5 kg Welding controller DALEX RS 17 LS 5-phase synchronous welding controller with 2 welding programs PAS no.: 0413-410 Serial no.: 41341000278 Year of manufacture: 2006 Operating modes: Single (EP) / Series (SP) Pre-hold time, post-hold time, hold-open time, and pause time: each adjustable 1 – 99 cycles Current time: 0.5 – 9.5; 10 – 99 cycles Welding current: 0 – 99 Skt. Impulses: 1 – 99 Current rise time: 0.5 – 9.5; 10 – 15 cycles Parameter setting via arrow keys Bljdeyxrhdepfx Ad Aog - with solenoid valve control - Current adjustment via phase angle control - Welding control unit in steel switch cabinet for wall mounting Total weight: approx. 30 kg Very good condition

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 4,000 mm, warranty duration: 3 months, type of cooling: water, hose package length: 4,000 mm, welding current at 60% duty cycle: 245 A, welding current at 100% duty cycle: 210 A, welding current (min.): 5 A, welding current (max.): 260 A, Rehm Invertig 260 AC/DC Digital – Water-cooled TIG ACDC 3-month warranty Refurbished, tested, serviced, and ready for immediate use Bjdpfx Adeywgpae Aslg Specifications: 5-260 AMP 380 Volt Water-cooled ACDC Pulse 2/4 Step Pre gas / Post gas Start current / End current Up slope / Down slope Frequency adjustable AC Balance AC Frequency Electode option Including Parweld PRO20 Welding torch, earth work cable with clamp, and gas cable. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Year of construction: 2019, condition: like new (used), functionality: fully functional, For sale: SCHTEC WM740 four-head automatic welding machine, rarely used and in like-new condition, including WM620 corner cleaning automaton, cooling station, and automatic turning arm. If purchased together with the SMC350 machining center and Pressta two-head automatic screwing unit, which are also listed in your advertisements, the package price is EUR 180,000. Bsdpfxjyzimce Ad Ajlg For further information, please feel free to contact me.

Condition: good (used), Inert gas welding machine with pulse function, pulse-arc welding system, MIG/MAG pulse welding system -with: 3 hose packages (1x aluminum, 1x stainless steel, 1x steel) -Max. welding power: 330 A -Equipment: remote control connection, with removable wire feed, including ground cable, gas fitting -Wire feed: 4-roller drive Blodpfx Aod I U Dwod Asg -Cooling: Water-cooled -Dimensions: 655/900/H1490 mm -Weight: 160 kg

Condition: ready for operation (used), machine/vehicle number: 03890317, Machine number: 03890317 // See pictures for condition and details Blodot A A Aqepfx Ad Ajg

Condition: refurbished (used), functionality: fully functional, welding current (max.): 400 A, Equipment: type plate available, ESS EcoMag 414 – Water-cooled MIG/MAG Note: This is a Trade-in. Refurbished, tested, serviced, and ready for immediate use. Specifications: 40-400 AMP 380 Volt Water-cooled 2/4 Step / 4 Roller drive Steplessly adjustable Including PRO5000 Welding torch, earth work cable with clamp, gas cable, and +- 5 meter interconnection hose. Blsdpfx Adsywatro Ajg Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: AC, Spot Welding Machine Type KAP10 CE certified Operated: Pedestal Power at 50% ED 10kVA, Continuous power 7.1kVA Welding Capacity: 1.5+1.5mm steel sheet Transformer Construction: -Primary winding: Copper wire -Secondary winding: Copper flexible foil sheet Bodpfxjkwcbyj Ad Aolg -Core: Silicon steel EI core Mains Connection: 220V/400V (50Hz) Protection Fuse: 220V-40A / 380V-25A Power Level: 5 Arm Length: 500mm Arm Diameter: 40mm Electrodes: Adjustable electrode stroke Power Input Cable: 3m Protection Class: IP21 Space Requirement (W/L/H): 380mm x 1000mm x 1050mm Weight: 110Kg Warranty: 1 years (+10 years spare parts support)

Condition: new, Year of construction: 2026, Technical Specifications: Model: KEP40 Bljdoy Dildjpfx Ad Ajg Operated: Manuel Power: 40KVA Welding Capacity: 1+1 mm mild steel Power Level: %0-100 power adjustable by digital microcontroller Weld Time: 1-99 Cycle (20ms - 2s) adjustable by digital microcontroller Input Voltage: 380V/50Hz Protection Fuse: 63A Flexible Pistol Arm cable Length: 250cm Flexible Chassis Cable Length: 100cm Power Input Cable: 3m Protection Class: IP21 Dimensions (W/L/H): 530mm x 430mm x 610mm Weight: 116kg

Condition: good (used), Year of construction: 1985, Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-action spot welding machine Blsdpfx Adok Aubxe Aeg -Manufacturer: Tecna, Spot welding machine: Type 4161 -Rated power: 31 kVA -Operation: via foot pedal -Dimensions: 780/250/H1500 mm -Weight: approx. 130 kg

Condition: good (used), Year of construction: 1976, Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-action spot welding machine -Stationary -Operation via hand switch Bljdpfxjc N Uabe Ad Ajg -Arm length of welding machine: 350 mm -Welding pliers type: -Steering -Machine dimensions: 1500/1000/H1670 mm -Machine weight: 774 kg -Dimensions of control cabinet: 1550/420/H1960 mm -Weight of control cabinet: 330 kg

Condition: new, Year of construction: 2024, Cleaning, welding, cutting, weld cleaning, and energy storage welding — the handheld laser welding machine can improve the efficiency of your production. It’s able to weld carbon, stainless steel, aluminum and titanium alloys, plastics, and various dissimilar materials. This laser welder is easy to operate and features a user-friendly interface. Wattsan Laser Welding includes a 10-meter cable, which allows you to operate freely. The gun weighs only 1 kg and includes an auto-wire feed. This model has 2 mirrors, 8 seam types and multiple types of weld clean. You can give our managers a call for additional details! Wattsan 5in1 G2 Pro characteristics: Bljdperztrmjfx Ad Aog Cooling: water Laser power: 1500-3000 W Machine size: 1075x664x1055 mm Laser source: JPT / Raycus Weight: 235 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our website you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, Year of construction: 2024, Cleaning, welding, cutting, and weld cleaning — the handheld laser welding machine can improve the efficiency of your production. It’s able to weld carbon, stainless steel, aluminum and titanium alloys, plastics, and various dissimilar materials. This laser welder is easy to operate and features a user-friendly interface. Wattsan Laser Welding includes a 10-meter cable, which allows you to operate freely. The gun weighs only 1 kg and includes an auto-wire feed. This model has 1 mirror and 1 seam type. You can give our managers a call for additional details! Wattsan Welding machine characteristics: Cooling: water Laser power: 1500-3000 W Machine size: 1075x664x1055 mm Laser source: JPT / Raycus Weight: 235 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our website you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine. Bedpfoiichhox Ad Aelg