Used Jöni Easy for sale (5,979)

Condition: like new (used), Year of construction: 2006, operating hours: 671 h, functionality: fully functional, total height: 2,992 mm, total length: 3,980 mm, total width: 2,580 mm, overall weight: 8,500 kg, operating hours of spindle: 671 h, number of slots in tool magazine: 48, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer this as new Quaser MV154 APC/P vertical machining center, year of construction 2006. The machine has 9039 power-on hours, but only 671 spindle-hours, this has been confirmed in the parameters aswell. The machine has seen very little usage. When i bought this machine the linear guides for the X & Y axis was worn out as they had not been lubricated properly and with the incorrect grease. These have been swapped for brand new ones, aswell as most of the air and coolant hoses. All the lubricating lines for the X & Y guides and ballscrews have also been renewed. There are some tools in the 48 tool magazine aswell. It also has a 3D Taster. The chip conveyor also has new bearings and seals. Itodpfx Agszxz Dfo Ajn Two Hilma vices could also come with the machine. I have done a ballbar test and checked the machine to be in great working order. The size of the machine also makes transportation easy, as it will fit inside a standard curtain semitrailer. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2008, Spraying machine CEFLA FINISHING EASY 2000 DUO D Pictures are only sample - Producer Cefla - Type EASY-DUO - Year of construction 2008 - Working width 1300 mm - Operating side, left - Prize for overhauled machine Isdozv Tg Topfx Ag Aotn - Actual condition, machine is not overhauled - Duo gun drive system - Dry filter system - Exhaust air 12.000 m³/h - Transport belttransport System - Feed speed adjustable 2 - 8 m/min - Belt cleaning system with roller - Lacquer reclaiming system with v-belt - Number of installed lacquer circles 2 Stk. - Number of installed spraying guns 4 Stk. - spray gun type Kremlin AVX - Airmix spraying system - Height adjustment for spraying guns - Number of lacquer pumps 1 Stk. - Producer lacquer pump Kremlin 16-120 - Supply air box - Ex-prevention - Suitably for solvent based lacquer - Suitably for water based lacquer - Used machine, good condition - Length ca. 6152 mm - Width 3.700 mm - Height 2.895 mm - Total connection power 18 KW - Location, on stock - Voltage fluctuation max. +/- 5 % _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in contact with us!

Year of construction: 2014, condition: good (used), Millipore Flow Cytometer Guava easy Cyte 8 HT, manufactured in 2014. Regularly maintained. Includes PC and software. Location: Cologne. Due to laboratory closure, various equipment is available; please request a detailed list. Isdsiv S Aropfx Ag Aotn

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: S23SFERA05, Mobile stretch winder ATLANTA SFERA Easy TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE Brake can be adjusted manually from the carriage by means of a tension roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless stretch film Standard connection values: 230 V - 1L+N+PE - 50 HZ Optionally available: -winding height up to 3500mm -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" 200% -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM SLIDE TYPE “PS” (POWER STRETCH) 120-400% -Automatic line formation to strengthen the winding .Automatic system for cutting the film in 3 strips for “BANDEROLL WRAPS” - Machine version for temperatures down to -5° C -BATTERIES LITHIUM RELION 2 x 12V Other systems available from the Ludwigsburg warehouse. Isdpoz Indujfx Ag Aetn Illustration similar.

Condition: used, Year of construction: 2004, Used Machine Year of Manufacture: 2004 Features and Technical Specifications: Travel Ranges: - X-axis: 2,685 mm - Y-axis: 1,095 mm - Z-axis: 140 mm Milling unit: - 6 kW, water-cooled - HSK 63 F tool holder - Speed: 1,000–18,000 rpm - Tool changer: 6-position, side-mounted Drilling head: - 9 vertical drilling spindles spaced at 32 mm intervals - Horizontal drilling spindle: 1 1 - Vertical drilling spindle: 1 1 Itodpfx Ajzk Nmfeg Aen Groove saw: in the X direction Control system: Twin CAm 32 Vacuum pump: 100 m³/h Includes vacuum suction cups Dimensions: 5,200 x 2,843 x 1,855 mm Weight: approx. 3,500 kg Availability: upon request Location: Röllbach

Condition: used, Year of construction: 2005, Second-hand machine Itjdpfxozk Nu Ne Ag Aen Year of manufacture: 2005 Features and technical specifications: Travel ranges: - X-axis: 2,685 mm – Y-axis: 1,095 mm – Z-axis: 140 mm Milling unit: - 6 kW, water-cooled - Tool holder HSK 63 F – Speed 1,000 – 18,000 rpm Tool changer: 6-position, side-mounted Drilling head: - 9 vertical drilling spindles in 32 mm increments - Horizontal drilling spindle: 1+1 - Vertical drilling spindle: 1+1 Groove saw in the X-direction Control system: Twin CAM 32 Vacuum pump 100 m³/h Including vacuum suction cups Dimensions: 5,200 x 2,843 x 1,855 mm Weight: approx. 3,500 kg Availability: by arrangement Storage location: Röllbach

Condition: used, lifting height: 4,090 mm, Year of construction: 2019 Operating hours: 3.710 Field of application: Construction Empty weight: 5.000 kg Dimensions (LxBxH): 551 x 184 x 252 cm Itjdpozpaizsfx Ag Asn Track width: 40 cm Digging depth: 3.625 m

Condition: used, Year of construction: 2021, Drive shaft, 2 x 8 mowing discs, auger-type crop consolidation, lighting + warning signs, pneumatic overload protection, ISOBUS control, hydraulic swath curtain. Itedpez Sbh Refx Ag Aon

Condition: used, Year of construction: 1994, functionality: fully functional, Listing for Machineseeker – Used CEFLA Painting Line (Fully Operational) For sale is a complete, fully operational paint booth machine dismantled from a used production line. Manufacturer: CEFLA – premium industrial equipment for professional coating applications. System Components: 1 pc. belt conveyor • Length: approx. 1,900 mm • Belt width: 1,400 mm • Conveyor speed: 1.7 – 10.7 m/min Iodpfoxdwi Iex Ag Ajtn 1 pc. CEFLA EASY 2000 automatic spraying machine Condition: Used, fully functional Regularly serviced Immediately ready for use Field of application: Ideal for industrial coating and drying processes, e.g. furniture or wood processing sectors. Other information: Viewing possible by appointment

Condition: used, This listing includes 3 combination steam ovens, convection ovens from the manufacturer Convotherm, type OGS 20.20, gas-fired version without a boiler, manufactured in 2008. Offers for export in a package are preferred. Our ID Nos. 9361 + 9362 + 9363 The units are set for natural gas; they can also be converted to propane gas. The combination steam oven is equipped with a loading trolley for 20 x 2/1 GN containers or 40 x 1/1 GN containers and with insert racks for 2 x 1/1 GN containers. The units are sold in a package, without inspection and warranty, as returned by the customer. Inspection work will certainly need to be carried out for a new start-up. All 3 combination steam ovens are functional, and videos can be provided. The core temperature sensors are in good condition, and a door lock is included because one is no longer functional. Wiring diagrams and documentation are included. The units were exclusively used for heating/regenerating frozen ready meals. You will receive an invoice with VAT shown. Our used equipment service for you: High-quality branded equipment at fair prices Professional refurbishment/inspection & expert cleaning Tested & fully functional Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Testing according to DGUV V3 Technical data: W x D x H: approx. 1232 x 1055 x 1952 mm Power connection: V: 400 / kW: 2.2 Gas connection: kW: 70.0 Inserts: 20 x 2/1 GN or 40 x 1/1 GN Weight: approx. 403 kg Year of manufacture: 2008 Condition: Used, no inspection Further details: ACS Advanced Closed System (automatic energy-saving system, optimal humidity in the cooking chamber) Crisp & tasty (multi-stage cooking chamber dehumidification in ACS) Press & Go (symbol) for quick selection of defined cooking programs Tray Timer / staggered loading Start time preselection in real-time mode Night baking Delta-T cooking (multi-point core temperature sensor required) Cook & Hold Programmable with 250 cooking programs, each with up to 20 steps CONVOTHERM cookbook with pre-programmed cooking programs Disappearing door: more space and safety Double-glazed door with integrated door locking position Antibacterial door handle with ventilation position and safety function Door handle with automatic closing function Motor brake when opening the cooking chamber door: less steam release Fan with autoreverse function Hand spray with infinitely adjustable settings Multi-point core temperature sensor Height-adjustable device feet Simple operation via menus/icons Bright graphic display Digital rocker switch for easy setting of temperature, time and core temperature Modular processor control with clear display and module self-test RS232 interface Storage of all device settings and cooking programs in an additional memory module Permanent self-diagnosis for error detection System with full-text error description Safety program mode: the device can be operated with limited functionality Basic prison version Robust design in stainless steel Seamlessly welded cooking chamber Rounded cooking chamber corners Suction plate easily removable Hygienic seal Cooking chamber lighting with shatterproof glass cover Including loading trolley with condensate collection tray Subject to change and errors. The sale is exclusively subject to our general terms and conditions. Itsdpjzvd H Dsfx Ag Aon

Year of construction: 2022, condition: good (used), functionality: fully functional, REF: MM6470 Volumetric filling and sealing system for pre-made pouches (doypacks). Rotary Volumetric Filler mounted on stainless-steel frame with 1 x Pre-made pouch (doypack) filling and sealing machine. Manufacturer - Qinyao/Top Y Machinery. Iodpezp E T Sefx Ag Astn Date of manufacture - 2022. Setup of volumetric filling system: Stainless-steel large infeed hopper over Rotary volumetric cup filler (freestanding) with nylon volumetric cups. Setup of pre-made pouch fill and seal machine: Twin-lane bag magazine (lanes 1# and 2#), vacuum pick-up and bag opening (1#Sucking, 2#Sucking, Pick Up Bag, Open Bag), front and back sealing jaws with sponge-faced grippers, Siemens Smart Line HMI, Omron controllers for front jaw, back jaw and printer, thermal transfer ribbon coder and discharge chute. Speed – variable up to 20 packs / minute, depending on fill volume. Pack size range – can handle doypacks up to 300mm long x 250mm wide. Controls – Siemens Smart Line HMI touch-screen control with easy-to-use programme settings. Tooling – 1 x Set of volumetric cups, previously used to pack whey protein products (1000g volume), dried fruit (200g volume) and other dry ingredients (depends depending on product). Supplied with a fill head attachment for plastic scoops as the material is deposited. Electrical requirements - 3 phase. Requires compressed air supply. Condition – Very good, likely has a total use of one year production. *Please note* - the pre-made pouch (doypack) filler and sealer has previously been used / fed by a linear weigher and a multi-head weigher depending on what the products being packed were.

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Condition: Function tested Equipment and technical data: Milling unit: 4.4 kW Tool holder: HSK 63 F Speed: 1,000 - 18,000 rpm Water-cooled Tool changer: 4-position, lateral Drilling head: 9 vertical drilling spindles on a 32 mm pitch Horizontal drilling spindle: 1+1 Vertical drilling spindle: 1+1 Grooving saw in X-direction Control: Twin CAM 32 Vacuum pump: 40 cbm/h Including vacuum suction cups Travel paths: X-axis: 2,685 mm Y-axis: 1,095 mm Z-axis: 140 mm Weight: approx. 3,500 kg The machine is completely checked for all mechanical, electrical, and electronic components and overhauled where necessary. All guides checked; console guides replaced New PC control system for the TWIN CAM control All axis modules checked and serviced Location: Flörsheim Itedpfx Agjw I Ug He Aen Availability: by arrangement

Condition: new, Hydraulic tapping machine Easy Tap ETH 24 Thread diameter up to M 24 Itodpfx Ajtbawkjg Aon Speed 0 - 600 rpm Thread M 5 - M 24 Working range 2050 Rmax. Working height 920 mm Table surface 900 x 700 mm Oil capacity 100 l Motor power 3.0 kW Weight: 220 kg Equipment: Hydraulic tapping machine Incl. machine base with clamping disk Mobile Hydr. pressure gauge Infinitely variable speed adjustment from 0 - 600 rpm Vertical / horizontal thread cutting possible Special accessories included / quick-change inserts : M05 / M08 / M10 / M12 / M14 / M16 / M20 / M24

Year of construction: 2007, condition: ready for operation (used), overall weight: 1,300 kg, number of axes: 3, This 3-axis EROWA Robot Easy Automation was manufactured in 2007. It features a maximum load capacity of 1500 kg and a magazine plate with 6 positions per level. The machine has a Z-axis travel of 75 mm and an M-axis capable of 360° movement. If you are looking to get high-quality automation capabilities, consider the EROWA Robot Easy Automation system we have for sale. Contact us for further details. • Maximum Load Capacity (Magazine): 1500 kg • Magazine Plate Type: MTS 400 • Magazine Capacity: 6 Positions per Level • Maximum Load per Level: 1500 kg • Maximum Load per Position: 250 kg • Maximum Transfer Weight (RCS 5): 250 kg • Maximum Transfer Weight (RCS I): 130 kg • Required Coupling for Loads >130 kg: RCS 5 Coupling with RCS 5 Gripperlink ER-038622 • Supply Voltage: 3 × 400 VAC ±10% / 3 × 208 VAC ±10% / 3 × 480 VAC ±10% • Frequency: 50/60 Hz • Power Rating: 710 VA • Nominal Current: 1.8 A • Fuse Protection: 10 ATT • Service Socket Voltage: 230 VAC • Minimum Pneumatic Pressure: 5 bar • Minimum Air Consumption: 200 l/min (Nameplate) • Pneumatic Air Quality: Dry, Oil-Free • X-Axis Travel: Type Dependent • Z-Axis Travel: 75 mm Itodpjzcdwdefx Ag Aen • M-Axis Rotation: 360° • Z-Axis Drive: Pneumatic • M-Axis Drive: Electric • Net Weight: 1300 kg • Interface Type: EROWA Standard Interface • Communication Interface: RS232 • Optional Communication Interface: RS422 • Interface Connector: 72-Pin Harting Connector • Communication Protocol: EROWA EWIS Protocol • Alternative Communication Protocol: EROWA Standard Protocol • Robot Door: Pneumatic Door Valve Kit • Pneumatic Connection: Standard • Electrical Connector: Harting 6-Pin (230 V) • Electrical Connection: 230 V (Phase 1 + 2) • Machine Condition: No Longer Connected to Power • Viewing: Available

Condition: good (used), Year of construction: 2008, pressing force: 300 t, control type: CNC control, actuation type: hydraulic, CNC crowning Hydraulic tool clamping EFL Easy Form laser measuring & correction system Set tooling Laser guide protection Controlled axis Y1/Y2/X/R/V-Axis Max. bending length: 4000mm Distance between supports: 3150mm Max. pressing force: 320T Distance table mount: 570mm Max. stroke: 300mm Table width: 200mm Support throat: 400mm Descent speed: 120mm/min Working speed: 14mm/min Return speed: 130mm/min Itedpfswrza Aox Ag Asn X-axis range: 1000mm Control: CADMAN Power: 42kW Length: 5800mm Width: 2300mm Height: 3800mm Weight: 23000kg

Condition: used, Year of construction: 2020, functionality: fully functional, load capacity per storage section: 500 kg, Price: Make a serious offer Mezzanine, 760 m² storage platform Very nice industrial mezzanine from 2020, in excellent condition, completely disassembled, marked, and palletized for easy and quick reassembly. Key features: Area: 750 m² Itodoz Tdhnepfx Ag Ajn Dimensions: Approximately 45 m x 17 m (see plan) Allowable load: 500 kg/m² Floor covering: very high-end grating Height under structure (under beam): 4.50 m Height on floor level (on beam): 5.00 m Column spacing: approximately 4.3 m x 5.8 m Condition and packaging: Entire assembly in very good condition Disassembly carried out carefully by professionals All elements are numbered; marking and assembly plans provided Assembly ready Stored on pallets Loading onto your truck is free Price: Make a serious offer

Condition: refurbished (used), Year of construction: 2000, table length: 1,000 mm, table width: 1,000 mm, operating pressure: 3,800 bar, (Pictures in current state) - prepared for two cutting heads (1x pure water) - Control unit will be renewed - will be sandblasted and repainted - Pump optionally available - available after order in 12-16 weeks Special features: - max. two cutting heads per Z-axis Itodpfxonab Rle Ag Ajn - Can be individually adapted to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: used, first registration: 12/2013, Year of construction: 2013, KRONE SD TAUTLINER Sliding Curtainsider Trailer EASY TARP XL - Certificate for Beverages!! 2 units available!! EASY TARP - Equipment / Side Curtains: Pneumatic Quick Opening and Closing!! • ABS • 3 x Mercedes axles, air-suspended Iodpfx Aewmpibog Ajtn • Lift axle • Lifting/lowering system • Disc brakes • EDSCHA roof • Spare wheel carrier • Wooden floor • Beverage certificate: Vertical tarpaulin reinforcements / stiffening pockets • Interior dimensions: 13,620 x 2,500 x 2,800 mm (LxWxH) • Unladen weight: 6,236 kg • Gross vehicle weight: 36,000 kg (39,000 kg technically possible!) - German trailers! - New MOT / SP! Subject to errors and prior sale!

Condition: excellent (used), 508 USED Fritsch Rollfix 50/650 Easy automatic flattener, dough roller. EXTERNAL DIMENSIONS (in cm): Isdpfx Aozugb Iog Aotn - W: 365 - L: 120 - H: 140 - Working width: 65 TECHNICAL DATA: - Power: 1.5 kW - Power supply: 400V 50Hz - Roller gap: approx. 0.5–42 mm - Belt speed: up to approx. 40 m/min The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: used, Year of construction: 2006, Ref:10882 . 2006 SCS ‘Easy Trim’ Front Cutting Device. For the front (foredge) cutting of perfect bound and thread sewn soft cover books (without flaps device). Can be integrated in or off-line, and used either before or after the three knife trimmer (4th cut) and when not in use the unit can be simply used as a conveyor. Very quick size change of approx. 3 mins through simple keying in of book parameters. Front trim using a steel knife against a plastic cutting stick. Motorised delivery table. Single button push transforms the unit into a regular conveyor belt so no divert or extra conveyor necessary. Specification: Book spine length, Max: 540 mm, Min: 120 mm Itedpfxevtcvis Ag Ajn Book width trimmed, Max: 350 mm, Min: 100 mm Book thickness, Max: 60 mm, Min: 5 mm Off-cut width, Max: 45 mm, Min: 5 mm Mechanical speed, Max: 4,000 cycles/hr. Compressed air required : 100 ltr/min.@ 6 bar

Condition: reconditioned (used), Year of construction: 2015, Boschert EASY SHARP tool grinding machine Itedeid I T Iepfx Ag Aon Equipped for Trumpf tool system (Amada system optional) Machine for maintaining stamping tools, with a cooling system and an extra-powerful motor, making it also suitable for use with diamond grinding wheels. Used machine, currently being refurbished Equipment for Trumpf tool system up to size III Accessories: Tool holder for flat punches and Whisper punches Die holders for sizes I, II, and III New corundum grinding wheel Truing diamond Cooling system overhauled and machine base frame Technical data: Grinding wheel diameter 175 mm Vertical adjustment 150 mm Working area 400 x 150 mm Motor power 2.2 kW Motor speed 2825 rpm Adapter for Amada system also available as an option Images are similar

Condition: new, Year of construction: 2025, functionality: fully functional, pressure: 6 bar, warranty duration: 60 months, inner dimension width: 5,000 mm, inner dimension length: 15,000 mm, inner dimension height: 5,000 mm, filter area: 352 m², volume flow: 22 m³/h, Equipment: documentation/manual, lighting, Blasting house *up to 5 years warranty* for all blasting media made of a steel construction/isopanels with filter system, air circulation system, blasting media preparation, pressure blasting pot 200l automatically refilling, blasting hose with dead man's control, breathing air system, LED lighting, wall cladding 70shore 4mm fabric rubber, sweep pit bucket elevator. Blast media recirculation via sweeping pit with bucket elevator can be upgraded to cross conveyor screw with dosing hood across the entire width as sweeping pit or complete flat conveyor floor. Workpiece transport can be retrofitted: blasting carriage with track bed, crane system, crane roof opening, etc. For glass bead blasting for stainless steel, can be upgraded with the correct magnetic drawer or electrically driven magnetic drum separator. Itedpfsu Hy Tpex Ag Aon When blasting with 2 different blasting media (ferritic and mineral), upgradeable with magnetic drum separator, final magnetization stage and second air separator for blasting media separation, cleaning. Safety equipment: Emergency lighting battery, emergency stop switch in the cabin and outside, viewing window to the blasting chamber, door/door limit switch, dead man's control, pressure vessel quick venting Warranty up to 5 years on various components. 50 years of experience and more than 3000 systems in blasting machine construction

Condition: excellent (used), power: 265 kW (360.30 HP), first registration: 02/2019, fuel type: diesel, axle configuration: 6x4, wheelbase: 5,250 mm, fuel: diesel, fuel tank capacity: 500 l, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 8,370 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2019, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, power assisted steering, power mirror, trailer coupling, - Brake booster - Differential lock - High beam headlights - Low noise - Speed limiter - Cab - Air suspension - Air-suspended seats - Air horn - Rotating beacon - Rear view camera - Sun visor - Power take-off (PTO) Technical information Number of cylinders: 6 Engine displacement: 10,518 cc Axle configuration Maximum front axle load: 9000 kg Rear axle 1: Max. axle load: 11,500 kg Rear axle 2: Lift axle; Max. axle load: 7,500 kg; Steerable Weights Unladen weight: 15,975 kg Payload: 12,025 kg GVW: 28,000 kg Functional Crane: PALFINGER-EPSILON Q 170 EASYFOLD, behind the cab Body manufacturer: KIPPER with flaps and rear doors Maintenance, history and condition APK (technical inspection): valid until 02/2027 Technical condition: very good Optical condition: very good Identification License plate: 25-BLZ-3 MAN TGS 26.360 6x4H-4 BL TIPPER + PALFINGER EPSILON Q170 EASYFOLD + BAKKER GRAB Very nice and fully equipped MAN TGS 26.360 6x4H-4 BL with tipper body and Palfinger Epsilon Q170 EasyFold loading crane mounted behind the cab, including Bakker grab. An extremely versatile and robust combination, ideally suited for earthmoving, road construction, recycling, gardening and landscaping, municipal work, as well as the transport and handling of various materials. The vehicle comes from a single owner, is in very good condition and has only 190,068 km on the odometer. VEHICLE DATA * Manufacturer: MAN * Type: TGS 26.360 6x4H-4 BL * Axle configuration: 6x4H-4 * License plate: 25-BLZ-3 * First registration: 20.02.2019 * Mileage: 190,068 km * Engine power: 265 kW / 361 hp * Displacement: 10,518 cm³ * Fuel: Diesel * Emission standard: Euro 6 * Weight variant: 28,000 kg * Automatic transmission * Day cab * Air conditioning * Multimedia/audio system * DIN mounting plate on the front of the vehicle * Rotating beacons on the cab * Stainless steel toolboxes * From a single owner * Dutch vehicle * Valid technical inspection / APK until 02/2027 TIPPER BODY The vehicle is equipped with a robust tipper body for professional and intensive use. Equipment includes: * Hydraulic tipping function * Aluminum cover flaps * Rear doors * Hydraulically operated side panel * Robust and professional construction * Ideal for bulk goods, sand, earth, gravel, construction debris, green waste and other materials The hydraulic side panel enables quick and efficient loading and unloading, making this combination particularly versatile. PALFINGER EPSILON LOADING CRANE Located directly behind the cab is a: PALFINGER EPSILON Q170 EASYFOLD Ijdpfx Aezzn Hfog Astn The Epsilon Q170 is a robust and powerful loading crane, designed for intensive professional loading and handling operations. The crane is equipped with: * Palfinger Epsilon Q170 * EasyFold system * Mounting directly behind the cab * Professional hydraulic system...

Condition: new, mileage: 500 km, power: 335 kW (455.47 HP), fuel type: diesel, overall weight: 35,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Mercedes-Benz Arocs 5 3546B 8x4 EURO6 GSR with Schwing concrete pump S 47 SX III 5-arm ???including Easy-Flex outrigger system??? First registration: unregistered Mileage: 500 km Color: Arctic White Technical Data * Power: 335 kW * Horsepower: 455 hp * Tires (front and rear): 315/80R22.5 * Gross Vehicle Weight: 35,000 kg * Emission Class: Euro 6e * Transmission: Automatic, Mercedes Powershift 3 * Condition: New vehicle Chassis Equipment * Twin-plate clutch * M cab Classic-Space, 2.30m, tunnel 320mm * Steering: Servotwin * Cab suspension: Comfort * Front axle: 7.5t, straight design * Rear axle, bevel gear: 233, planetary gear 13.4t * Transmission oil cooler * Fuel tank: 290L aluminum + 25L AdBlue * Disc brakes (front and rear) * Sun visor * Air conditioning * ABS + ASR * Driver comfort seat, velour leather * Fog lights, LED daytime running lights * Multimedia cockpit with navigation and Bluetooth * Air horns, cab roof * Pre-wiring and display for up to 4 cameras * Pre-wiring for CB radio * Auxiliary water heater, cab * Reverse warning system * Cruise control * GSR (General Safety Regulation) equipment as follows: * Lane Keeping Assist * Attention Assist * Traffic Sign Assist * Active Brake Assist 6 * Active Sideguard Assist 2 * Frontguard Assist * Pre-wiring for alcohol tester with immobilizer * Rear view camera Superstructure Equipment * Schwing S 47 SX III 5-arm concrete pump, 47m * Number of joints: 5 * Delivery line: Super 2000 DN 125 * Vertical reach: 46.10m * Horizontal reach from turntable: 40.96m * Placing boom: 47R * Pump type: P2525-120/85 * Theoretical concrete output: 162 m³/h * Vector control system * Slide system: B-Rock * Electric vibrator on hopper grid * Swivel range: 2x 365° * Outrigger system: Easy-Flex CE * Filling height: approx. 1350mm Itodpfxei Tkbhj Ag Aon * Hydraulic drive, max. flow: 636 l/min. * Delivery cylinder diameter: 250mm * Water tank: 610l, roller water pump * Remote control: Schwing Control 30 * Oil cooler * MPS control system

Condition: new, functionality: fully functional, COMPACT AND COMPLETE, in less than one square meter, "easy cart" offers everything you need to manage 3 different glue pots QUICK PROCESSING CHANGEOVER, in a few minutes it is possible to replace the glue pot with a different one already heated by "easy cart", improving the efficiency of the edgebander Iodpfequ N Efsx Ag Aetn STORAGE OF THE POLYURETHANE GLUE, at the end of the processing the glue pots are placed inside the container of the "easy cart". The innovative air drying system maintains 2 pots with polyurethane glue without problems for 72 hours at least