Used Jakob Müller Frick Ch Mvc 150 Label Loom for sale (23,972)

Condition: ready for operation (used), 1 x stitching unit 1550 2 x stitching heads HK75            ONLY 3,800 hours 1 x SEMKO side caliper with reject 6 x section feeders 1551 1 x cover folder feeder 1528 Dodpfx Ajv Ap Iwogmsck 1 x three knife trimmer 1565 1 x stream delivery 1564

Condition: new, power: 207 kW (281.44 HP), first registration: 02/2026, fuel type: diesel, tire size: 14.00R20, axle configuration: 4x4, wheelbase: 4,150 mm, fuel: diesel, fuel tank capacity: 180 l, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, total length: 7,500 mm, total width: 2,500 mm, total height: 3,200 mm, Year of construction: 2024, Equipment: AdBlue, air conditioning, Technical Information Number of cylinders: 6 Engine displacement: 6,728 cc Transmission Transmission: 6S1000TO, manual transmission Axle Configuration Tire size: 14.00R20 Brakes: Drum brakes Suspension: Leaf spring suspension Front axle: Steerable Weights Unladen weight: 5,590 kg Payload: 9,410 kg GVW: 15,000 kg Djdpozrmbcjfx Agmsck

Condition: ready for operation (used), 1 x Stitching unit 380 with Amrys 2 x Stitching headsd HK75 1 x Caliper control with reject 1 x Obluque sheet saddle monitor 1 x Remote control jogger inch 5 x Section feeders 370 with Amrys 1 x Cover folder feeder 554 with Amrys Dcjdsxya Eqepfx Agmjk 1 x Three knife trimmer 449 with Amrys 1 x Muller Martini Perfetto stacker delivery 450

Condition: ready for operation (used), 1 x stitching unit 380 with Amrys 2 x stitching heads HK75 6 x section feeders 370 with Amrys ASIR3 1 x cover folder feeder 1554 with Amrys 1 x three knife trimmer 449 with Amrys Dsdpovpaubjfx Agmjck 1 x OMG stacker delivery

Condition: new, power: 185 kW (251.53 HP), first registration: 05/2026, fuel type: diesel, tire size: 14.00R20, axle configuration: 4x4, wheelbase: 4,150 mm, fuel: diesel, fuel tank capacity: 120 l, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, total length: 7,480 mm, total width: 2,500 mm, total height: 3,070 mm, Year of construction: 2026, Equipment: air conditioning, = Additional Options and Accessories = - Leaf spring suspension - Windshield = Notes = Fuel tank: 120 liters Air conditioning Roof-mounted rotating beacon with LEDs Headlight protection Foldable rear bumper DAB radio = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 6,700 cc Transmission Transmission: 6-speed manual transmission Axle Configuration Tire size: 14.00R20 Brakes: Drum brakes Suspension: Leaf spring suspension Front axle: Steerable Djdpjzq D S Nefx Agmeck Weights Unladen weight: 5,900 kg Payload: 9,100 kg GVW: 15,000 kg

Condition: ready for operation (used), 1 x stitching unit - 380 2 x stitching heads HK75Q 1 x remote control jogger inch 1 x oblique sheet saddle monitor Dodpfxjxxnlpe Agmock 6 x section feeders 370 1 x cover folder feeder 1529 1 x three knife trimmer 449 1 x stacker delivery - Perfetto 450   Optional if needed; Centre cut for double production small size attachment for feeders additional stitching heads 

Condition: used, empty load weight: 8,680 kg, maximum load weight: 31,320 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 09/2018, suspension: other, tire size: 235/75R17,5, color: other, gearing type: other, front tire size: 235/75R17,5, rear tire size: 235/75R17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing eyes, ABS, widening with warning signs, vehicle is sold on behalf of., , --  Misprints, errors and changes reserved, sample images --, More data at: !, More Details: ! Dedjzrqidepfx Agmock

Condition: ready for operation (used), 1 x stitching unit 1550 2 x stitching heads HK75Q 4 x section feeders 1551 1 x cover folder feeder 1528 1 x three knife trimmer 1565 1 x stream delivery 1564 Dcjdszmzp Dspfx Agmsk

Condition: good (used), Year of construction: 2009, clamping force: 1,500 kN, Equipment: documentation/manual, ENGEL VC 1050/150Tech Screw: Ø 50 mm CLAMPING UNIT Clamping force: 1500 kN Opening stroke: 607 mm Djdpfxoy Rn E Aj Agmjck Ejector stroke: 150 mm Ejector force: 61 kN DRIVE Pump drive power: 30 kW INJECTION UNIT 1 Screw diameter: 50 mm Max swept volume: 422 cm³ Screw speed max: 250 r/min Screw speed current: 250 r/min Injection rate: 210 cm³/s Injection rate incr.: 165 cm³/s Spec. inj. pressure: 1955 bar Spec. inj. pressure+: 2332 bar Nozzle stroke: 350 mm Nozzle cont. pressure: 67.2 kN

Year of construction: 1999, condition: ready for operation (used), Hydraulic injection moulding machine manufactured in 1999. This DEMAG Ergotech 150-610 Viva features a screw diameter of 45 mm and a maximum daylight between platens of 850 mm. It has a shot weight of 260 g and a maximum mold installation height of 250 mm. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Ergotech 150-610 Viva machine we have for sale. Contact us for further details. Dodpjyxrt Tsfx Agmock

Condition: new, Year of construction: 2025, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. Dodpfx Aeg Dvdcegmock - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older bigger machine

Condition: used, Year of construction: 2018, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support Djdpfjx Ebzqex Agmock - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older bigger machine

Condition: ready for operation (used), 1 x stitching unit 380 2 x stitching heads HK75Q 1 x Touch screen Navigation control 1 x oblique sheet saddle monitor 1 x remote control inch 4 x section feeders 370 1 x cover folder feeder 1529 1 x three knife trimmer 449 Dcsdpjyuk S Ssfx Agmek 1 x stream delivery 1564 Optional; 2 x loop stitching heads 1 x Rima stacker

Condition: new, Year of construction: 2018, functionality: fully functional, working width: 1,000 mm, area performance: 3,600 m²/h, overall weight: 584 kg, tank capacity: 160 l, total height: 1,380 mm, total width: 1,100 mm, total length: 1,850 mm, water tank capacity: 150 l, operating speed: 6 mm/s, battery voltage: 36 V, gradeability: 16 %, noise level: 59 dB, empty load weight: 296 kg, TECHNICAL SPECIFICATIONS FEATURES Working width (cleaning) mm 1000 Working width (vacuuming) mm 1300 Area performance/hour (theoretical - practical) m²/h 6,000 - 3,600 Power supply Battery 36V Power consumption W 2650 Drive Front and rear wheel drive IP rating IPX3 BATTERIES Type Gel battery pack (6 units) 6 V 240 Ah () Battery life h - min 5 h Battery compartment dimensions x quantity mm x no. 540x295x380 x2 BRUSHES Diameter - Pad x quantity mm - inch x no. 508 - 20” x 2 Motor power x quantity W x no. 500 x 2 Motor speed rpm 170/140 Weight (head) - specific pressure Kg - g /cm² 65;79;101 / 24;29:37 Dcedpfx Aozpyi Ijgmok TRACTION DRIVE Motor power W 600 Maximum travel speed Km/h 6 Climbing ability at full load % 16 VACUUMING Motor power W 600 Vacuum (water column) mbar/mmH2O 165 / 1,700 Air flow rate l/s 32 Noise level dB(A) 67/59* TANK Type Double tank Capacity (cleaning solution) l 150 Capacity (dirty water tank) l 160 Weight (without/with batteries) Kg 296/584 Dimensions (L x W x H) mm 1850x1100x1380

Condition: ready for operation (used), 1 x stitching unit 1550 1 x Touch Screen Navigation control 1 x SEMKO side caliper  2 x stitching heads HK75Q Dcjdpfxozlu Sij Agmjk 6 x section feeder 1551   fitted with ASIR camera recognition              ONLY 2,600 hours from NEW 1 x cover folder feeder 1528 fitted with ASIR camera recognistion  1 x three knife trimmer 1565 1 x stream delivery 1564 Optional if needed; Waste extraction system Loop stitching heads Standards stitchinbg heads Slim line stitching heads

Year of construction: 2011, condition: excellent (used), functionality: fully functional, Rigid machine structure with large access doors. Integrated 600 dpi printer. Designer 2 user license. Slide-out mechanism (rear-side) for easy and fast label or ribbon replacement. Label rotation programmable in 1° increments. Vacuum sensing of the label from pick-up to placement. CCD camera to read the label before pick-up. Controlled by an industrial PC. Conveyor width adjustment using a hand crank. PCB side clamping. Active support base including 4 magnetic pins. Quick product change-over. Selectable by-pass operation. Uninterruptible power supply (UPS). SATO bar code printer EX2 Tower light display for machine status. CE certified. SPECIFICATIONS Printer type: SATO (600 dpi) Minimum label size: 6 x 6 mm Label creation software: ZebraDesigner 2 Cycle time: 2.5 sec. per label (6 x 6 mm) Labelling area: 460 x 460 mm Conveyor type: 3 mm ESD edge belt Conveyor speed: 24 m/min System software: Windows Network interface: Ethernet Monitor: 21” high-density flatscreen PCB transfer height: 950 mm ± 25 mm* Component clearance: Top 30 mm, bottom 30 mm* Machine interface: SMEMA* Colour: RAL9002* Power supply: 230 VAC/50 Hz/1 Ph Power consumption: 700 VA max. Air supply: 6 bar Air consumption: 70 ltr/min max. Noise level: Max. 65 dB * or specify MACHINE SIZES Machine L x W x H (mm): 850 x 1680 x 1440 Weight (Kg): 750 Applicable PCB Length (mm): 80 - 508 Applicable PCB Width (mm): 65 - 460 Dcsdpjzmxytsfx Agmjk PCB thickness (mm): 0.6 - 4 Fixed rail to front (A) (mm): 335

Condition: used, mileage: 20 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, wheelbase: 34,980 mm, first registration: 05/2024, emission class: euro6, color: white, number of seats: 6, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, cruise control, fog lights, immobilizer system, navigation system, parking sensors, power assisted steering, = Additional Options and Accessories = - Armrest - Passenger bench seat - Third brake light - Electrically adjustable exterior mirrors - Electrically adjustable driver's seat - Driver airbag - Remote central locking - Rear doors - Height-adjustable steering wheel - Fog lights - Rear parking sensors - Radio - Adjustable driver's seat - Partition without window = Notes = Dcodpfx Ageykzgfsmek Double cab 6 seats Double sliding door Cruise control Air conditioning Passenger seat bench Navigation system Parking sensors Front fog lights = Additional Information = General Information Number of doors: 5 Cab: double License plate: V-08-PDZ Technical Information Number of cylinders: 4 Engine displacement: 1,997 cc Transmission: 6 gears, manual transmission Dimensions and Weights Unladen weight: 2,131 kg GVW: 2,131 kg Length/Height: L2H1 Interior Interior: gray Product Safety Manufacturer: Nijwa Used Trucks Vormerij 12 7621HL BORNE, NL

Condition: good (used), Hand lever shears, lever shears, long-blade sheet metal and round steel shears, sheet metal shears, profile steel shears Dcjdeibriiopfx Agmsk -Manufacturer: Peddinghaus, lever shears, sheet metal and round steel shears -Steel sheet: up to 7 mm -Round steel: up to 20 mm -Rectangular profile: up to 18x18 mm -Lift-down device: -Overall dimensions: 480/210/H1360 mm -Transport dimensions: 1070/210/H470 mm -Weight: 41 kg

Condition: good (used), Hand lever shears, long-blade sheet metal and round steel shears, lever shears -Manufacturer: Mubea, sheet metal and round steel shears -Cutting insert length: 200 mm -Steel sheet: up to 7 mm -Flat/strip iron: up to 100x9 mm -Round steel: up to 20 mm Dedpfsif Azujx Agmsck -Rectangular profile: up to 18x18 mm -Lever arm: with rack and pinion transmission -Overall dimensions: 540/180/H1570 mm -Transport dimensions: 1250/180/H490 mm -Weight: 44 kg

Condition: good (used), Hand lever shears, long-blade sheet metal and round steel shears, lever shears -Manufacturer: Mubea, sheet metal and round steel shears -Cutting insert length: 200 mm -Round steel: up to approx. 20 mm -Rectangular profile: up to approx. 19x19 mm -Lever arm: with rack and pinion transmission -Overall dimensions: 455/170/H1540 mm -Transport dimensions: 1230/170/H440 mm Dcodpsibitmjfx Agmek -Weight: 49 kg

Condition: good (used), Moving bezel, tracking bezel, setting stick, lynette -Max. passage: Ø 150 mm -Edition: Gray cast iron -Hole spacing: 395 mm -Peak height: 240 mm -Drawings accompanying the photos Dcjdpfeb Eu Szjx Agmek -Dimensions: 480/455/H470 mm -Weight: 25 kg

Condition: good (used), Hand lever shears, long-blade sheet metal and round steel shears, lever shears -Hand lever shears: Sheet metal and round steel shears -Cutting insert length: 200 mm -Overall dimensions: 380/160/H1160 mm -Transport dimensions: 830/160/H500 mm Dcedpfxjiaqm As Agmjk -Weight: 25 kg

Condition: good (used), Hand lever shears, long-blade sheet metal and round steel shears, lever shears Dcsdpfxeia Rqfe Agmjk -Manufacturer: Mubea, sheet metal and round steel shears -Cutting insert length: 150 mm -Round steel: up to 12 mm -Lever arm: with safety spring -Lift-down device: -Overall dimensions: 320/120/H1260 mm -Transport dimensions: 990/120/H310 mm -Weight: 12 kg

Condition: used, Moving steady rest, moving steady rest, steady rest, lynette Dcodpfx Agob A Tdyjmek -Max. Passage: Ø 150 mm -Edition: gray cast iron -Hole spacing: 420 mm -Tip height: 210 mm -Drawing with the photos -Dimensions: 500/485/H80 mm -Weight: 18 kg

Condition: used, Fixators, leveling units, leveling elements, machine feet, machine feet, leveling shoes, machine foundations, leveling shoes, wedge shoes, machine supports, leveling feet, spring elements Dcjdpfxefzluzs Agmek -Leveling elements: 4 pieces, for machine tools and systems -Price: complete -Dimension: Ø 150 x 60 mm -Weight: 2,1 kg/piece