Used Kantelstuk Cw 05 for sale (4,851)

Condition: refurbished (used), Year of construction: 2015, machine/vehicle number: R-00689, load capacity: 205 kg, arm reach: 2,800 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Never-used ABB IRB 6700-205/2.8 manufactured in 2015.08. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: IRB 6700-205/2.8 Iijdpfx Aez U Tzasphjh Model Number: IRB Year of Manufacture Robot: 2015.08 Warranty term (months): 12   Payload (kg): 205 Reach (mm): 2800 Repeatability (mm): ±0.05 Controlled Axes: 6-axis Installation Type: Floor of Invented Weight (kg): 1270   Controller: IRC5 Year of Manufacture Cabinet: 2015.07 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, warranty duration: 3 months, year of last overhaul: 2026, type of input current: three-phase, overall weight: 195 kg, Fat recovery unit Jufeba WW-GW 05 2 rotating baskets for a maximum of 36 pieces each Temperature controller with safety thermostat Steam cover, drip tray with fermentation cart and aluminum tilting trough DGUV V3 electrical safety inspection available only from us Connection 400V, 16A-CEE plug Used unit with warranty Visit our large showroom! Iedjzpg I Djpfx Apheih

Condition: good (used), Year of construction: 2007, functionality: fully functional, turning diameter over cross slide: 800 mm, spindle bore: 105 mm, turning diameter over bed slide: 1,100 mm, center width: 1,500 mm, turning length: 1,500 mm, overall weight: 5,500 kg, Distance between centres: 1.500 mm Swing: ø 800 mm over cross slide Ijdpfez Tdgqsx Aphjih ø 1.100 mm over bed ø 1.380 mm in gap Spindle bore: ø105 mm Speed: 4,8 - 640 rpm Featured with: - 3-jaw chuck ø 380 mm - 4-jaw chuck ø 500 mm - Clamping plate ø 1100 mm - Moving steady ø 200 mm - Machine user manuals

Condition: used, machine/vehicle number: 008245, Max. panel width: 1000 mm Ijdpfsywad Rjx Apheih Max. panel length: 2500 mm Length of conveyor: 11500 mm Introduction system: with pushers

Condition: good (used), functionality: fully functional, Year of construction: 2010, We offer a variety of excavator buckets and trenching buckets with the VERACHTERT CW30 CW40 quick-change system (56cm between the "hooks"). Suitable for excavators from 20 tons upwards. All buckets are in good condition. 1x Mass excavation bucket with teeth, 145cm cutting width, 6 teeth CAT system, approx. 1.5 cbm 1x Foundation bucket, 100cm cutting width, 150cm digging depth, smooth cutting edge, approx. 1 cbm 1x Trenching bucket, humus bucket with hydraulic swivel motor! 210cm cutting width, top-quality product from "Rädlinger". (The rock bucket with the 3 teeth shown in the picture has already been sold). Isdpfx Apjzuybbohsih Total price for all 3 buckets together, net: €12,500. Collection in 96231 Bad Staffelstein / Upper Franconia / Northern Bavaria. Delivery can be arranged, subject to reimbursement of costs. If you have any questions or require further information, please send us a message or call us. We also have a Verachtert sorting grapple and a power tilt with a HYDRAULIC Verachtert quick coupler for sale; take a look at our other offers!

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 05/2012, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 9,010 mm, color: white, Equipment: tail-lift, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: SAF Brakes: disc brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 25%; Tyre profile right: 5% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 25%; Tyre profile right: 5% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 25%; Tyre profile right: 25% Weights Empty weight: 7.810 kg Carrying capacity: 35.190 kg GVW: 43.000 kg Functional Tail lift: Dhollandia DHSMR.20, slider lift, 2000 kg Maintenance APK (MOT): tested until 05/2027 Iodpfjz Rz S Sox Aphoih History Number of owners: 2 Condition General condition: average Technical condition: average Visual appearance: average Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: used, functionality: fully functional, power: 43.4 kW (59.01 HP), fuel type: diesel, overall weight: 5,929 kg, empty load weight: 5,632 kg, Year of construction: 2015, operating hours: 654 h, machine/vehicle number: WNCE0505CPAL01053, This excavator comes from our rental fleet and has always been well and regularly maintained. The excavator has only 654 operating hours and is ready for immediate use. Sold together with 2 digging buckets. Iiedsx Tpi Uepfx Aphjh Engine: Yanmar 4TNV98 Weight: 5,821 kg Digging reach: 6,380 mm Digging depth: 4,140 mm

Condition: used, Year of construction: 2016, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Rädlinger swing rotator for CAT M318 / CW 40 mount / Year of manufacture: 2016 Price: €12,890.00 net / €15,339.10 gross - Equipment class: 23 t - Weight: 840 kg Iisdpsymi I Aofx Aphsh Matching rigid ditch cleaning bucket available for €1,490.00 net. Price only applicable when purchased together with the swing rotator. We have many more attachments in stock, available immediately! Financing offers available on request. We are an official sales and service partner for Westtech, Gierking GMT, OilQuick, Weber MT, Holp, DMS, Seppi M., Magni telescopic handlers, JCB construction equipment, Mercedes-Benz, and Iveco. Additionally, with 800 used commercial vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! Internal No: 562046 = More information = Intended use: Construction Please contact Marius Herden for further information.

Condition: new, empty load weight: 1,175 kg, Year of construction: 2026, operating hours: 1 h, Bobcat E10Z mini excavator, NEW Year of construction: 2026, NEW Operating weight: 1,175 kg 3-cylinder Kubota diesel engine, STAGE V, FULL COOLER Adjustable undercarriage: 71cm to 110 cm (very stable) Isdpfx Aez N T D Dephsih Width-adjustable joystick control Two travel speeds Extra hydraulic function Work light CW05 mechanical quick coupler with lifting hook + 3 buckets Trade-in and delivery possible Special price: €19,950.00 (excluding VAT) Also available with a new machine transporter: LEASING is possible, please email/message us with your company name and registration number (for Belgium, your VAT number) for a non-binding quote/request! LEASE 60 months: €395 LEASE 72 months: €340 LEASE 84 months: €305 LEASE per week, starting from €77.

Condition: used, Year of construction: 2003, functionality: fully functional, input voltage: 400 V, cutting height (max.): 105 mm, cutting width (max.): 3,200 mm, total length: 4,500 mm, total width: 1,600 mm, total height: 1,800 mm, overall weight: 5,200 kg, Equipment: CE marking, saw blade guard, scorer, SCM Sigma Impact 105 C Beam Saw – 3200 × 3200 mm – 2003 Price: €19,500 + VAT – Ex Works, Ireland SCM Sigma Impact 105 C industrial beam saw / panel sizing saw. Year: 2003 Cutting capacity: 3200 × 3200 mm Blade projection: 105 mm Manufacturer: SCM Model: Sigma Impact 105 C Location: Ireland Condition: Used Availability: Immediately available The machine has been dismantled and is ready for loading and shipping. The SCM Sigma Impact 105 C is a heavy-duty industrial panel sizing saw designed for accurate, high-volume processing of sheet materials including MDF, MFC, chipboard and similar wood-based panels. Machine Specification 3200 mm cutting length 3200 mm rear loading/pusher capacity 105 mm blade projection Automatic programmable pusher Pneumatic workpiece grippers Main saw and scoring saw Pressure beam clamping Automatic cutting cycle Industrial SCM construction Condition & Sale The machine is used and is offered as seen, ex works Ireland. The machine is currently dismantled and prepared for transport. Inspection of the machine and components can be arranged by appointment. The buyer is responsible for collection, transport, installation and commissioning unless otherwise agreed prior to purchase. Assistance with loading and international transport can be arranged at additional cost. Ijdsz Iykmjpfx Apheih Payment in full prior to collection. Export The machine is immediately available for collection from Ireland. We can assist international buyers with: Loading arrangements European and UK transport quotations Installation and commissioning quotations if required Price: €19,500 + VAT, Ex Works Ireland Contact for further information, photographs, videos or transport enquiries. Search Keywords SCM Sigma 105, SCM Sigma Impact 105 C, SCM beam saw, used beam saw, used beamsaw, panel sizing saw, automatic panel saw, CNC panel saw, SCM panel saw, 3200 beam saw, 3200 x 3200 panel saw, Holzma alternative, Selco alternative, Gabbiani alternative, used woodworking machinery.

Condition: used, gearing type: other, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden. Ijdpfxoi Rnx Ue Aphoih Superstructure: Compressor with oil cooling. The compressor is operated via tipping hydraulics! Oil motor Sunfab type M-034, No. 278048, silo compressor GHH type CG80 H with diesel bell, machine No. 383266 WO2225NJ630F4DG, silo oil 405 spec. compressor oil K-10 ltr., pressure silencer W1-12 s2.0 inch Storz C2.0 inch internal thread, intake air filter W12/13 M lid R F-Part. AL17 safety valve R 1 1/2 inch 2.6 bar, measured compressor speed on Szm motor 1050 rpm, split drive large = compressor 3450 rpm. Dismantling of a Feldbinder silo. The compressor was overhauled in 2006 for approximately €9,000; invoice is available. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: good (used), Year of construction: 2005, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, 2005 CIMC tank container 20FT ISO tank container, 25,010 L / 1 compartment. T11, UN PORTABLE Steam heating Bottom discharge Design temperature: -40/+130 °C 5Y+CSC test valid until 05/2027 = Additional Information = General information Year of manufacture: Aug. 2005 Model year: 2005 Weights Empty weight: 3,800 kg Payload: 32,200 kg Gross weight: 36,000 kg Isdpfx Apozb Ei Eehjih Functional Cargo volume: 25,000 l Body brand: CIMC ONE WAY 20FT, 25,000L tank container, L4BN, UN Portable, T11 Number of compartments: 1 Condition Technical condition: very good Visual condition: good Further information Contact Arne Honingh for more information.

Condition: used, Year of construction: 1986, grinding length 5000 mm grinding width 2500 mm workpiece height 1600 mm column daylight 2680 mm Passage height 1720 mm table surface area 5500x2240 mm T-slot - distance 250 mm T-slot - width 36H12 mm T-slots 9 workpiece weight 50.000 kg table speed -stepless- 1-40 m/min grinding motor 22 kW turning speeds 960 U/min total power requirement 146 kW weight of the machine ca. 140 t dimensions of the machine ca. 17,5x10,5x6,6 m Peripheral grinding support: 960 rpm, 22 kW Universal grinding support: 7 kW, 500-2900 rpm Crooked grinding device The tech. Data are manufacturer or operator information and therefore non- Iisdpsyqu A Hefx Apheh binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: refurbished (used), Year of construction: 2011, machine/vehicle number: R-00706, load capacity: 45 kg, arm reach: 2,050 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Refurbished ABB 4600-45/2.05 manufactured in 2011.05. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: 4600-45/2.05 Model Number: IRB Year of Manufacture Robot: 2011.05 Warranty term (months): 12   Payload (kg): 45 Reach (mm): 2050 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor, Upside-down Mount Weight (kg): 425   Controller: IRC5 Year of Manufacture Cabinet: 2011.05 RCC Length (m): 14   Iiodez U Hcqopfx Apheh Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: excellent (used), Year of construction: 2022, operating hours: 50 h, ABB Multimove 2*IRB1200-5/0.9 + IRC5 Multimove controller + TPU, as new DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, providing comprehensive service for robot maintenance and repair. Over the years, we have developed into a holistic partner for all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc. Iiodpfez Tadlox Aphsh

Condition: used, Riddle bucket CW 30 • Working width 1000 mm • Suitable for excavators between 14 and 18 tons • Well-maintained riddle bucket Iiodpez S E Rhsfx Aphsh Condition: Used

Condition: used, total length: 2,770 mm, lifting height: 1,800 mm, Warehouse technology Still Kanvan 05 Iisdpfozlk Rnsx Apheh Drive Electric Lifting height (mm) 1,800

Condition: used, machine/vehicle number: 16359, Year of construction: 2020, operating hours: 5,803 h, load capacity: 500 kg, lifting height: 1,260 mm, free lift: 1,260 mm, load center: 600 mm, construction height: 2,200 mm, fork length: 850 mm, overall weight: 1,664 kg, enginetype: Electric, manufacturer: Still Iisdpew R A Uwjfx Aphjh

Condition: used, Year of construction: 2016, operating hours: 2,482 h, load capacity: 800 kg, lifting height: 1,580 mm, fuel type: electric, construction height: 1,900 mm, gearing type: other, overall weight: 730 kg, empty load weight: 515 kg, total length: 1,800 mm, color: red, mileage: 2,482 km, first registration: 09/2016, suspension: other, driver cabin: other, emission class: none, fuel: electricity, For sale is a reliable and robust BT SWE 080L, first registered in 09/2016, with a striking red exterior. Isdpfx Apsz E S Raehoih With a lifting height of 1,580 mm and a load capacity of 800 kg, this device is the ideal solution for warehouses, production facilities, shipping departments, or daily handling of goods. Thanks to its compact design, the BT SWE 080L is perfect for narrow aisles and precise work in small spaces. The electric high-lift pallet truck impresses with its easy operation, high maneuverability, and the renowned BT/Toyota quality. This model offers an economical and durable solution, especially for companies that value efficient and safe pallet handling. For sale only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.

Condition: refurbished (used), Year of construction: 2011, machine/vehicle number: R-00695, load capacity: 45 kg, arm reach: 2,050 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Refurbished ABB 4600-45/2.05 manufactured in 2011.03. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Isdpfoz U Rq Sox Aphjih Brand: ABB Model: 4600-45/2.05 Model Number: IRB Year of Manufacture Robot: 2011.03 Warranty term (months): 12   Payload (kg): 45 Reach (mm): 2050 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor, Upside-down Mount Weight (kg): 425   Controller: IRC5 Year of Manufacture Cabinet: {year_of_manufacture_cabinet} RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: excellent (used), functionality: fully functional, type of input current: AC, input voltage: 230 V, electrical fuse: 16 A, input frequency: 50 Hz, total length: 400 mm, total width: 400 mm, Bartscher FW-05 warming cabinet Temperature adjustable up to 85°C Stainless steel design Dimensions: 400 x 400 x 550 mm (W x D x H) Connection: 220V, 750 watts Used equipment, cleaned Come and visit us! Isdpfx Aezfxzuophoih

Condition: used, Year of construction: 2008, weight max. in kg / kg dimensions / mm weight / kg Technical data Manufacturer BÜTER Hebetechnik Type: HA 05-50 Isdpfx Ajtmyq Hophjih Year of construction: 2008 Load capacity 500 kg Own weight 3700 kg Lifting height 4842 mm Overall height 1222 mm Platform size 3000 mm x 700 mm Lifting time approx. 30 sec Lowering time approx. 30 sec Perm. ambient temperature -10°C - +40 ºC Motor supply: 400 V, 50 Hz Rated current: IN = 10 A + 4.5A Connected load 4.0 + 1.5 kW Control voltage 24 V IP protection class IP54 Operating pressure Lifting platform 182 bar Dbv setting 218 bar Pump capacity 12 l/min Operating pressure lifting/lowering chassis 36 bar Dbv setting 50 bar Pump capacity 3.1 l/min Oil type HLP 32 User manual available! TÜV until 07/2024

Year of construction: 2018, condition: like new (used), Dumeta hydraulic welding positioner, height-adjustable 500 kg load capacity, height-adjustable welding positioner with through-hole, 100–200 mm Table diameter 700 mm Horizontal height min. 0.6 m, max. 1.2 m Tilted height min. 0.40 m, max. 1.0 m Speed 0.11–1.25 RPM Weight 750 kg Tilt up to 135° Isdpfx Apehua Dqshjih Hand and foot remote control with speed display Very robust

Condition: used, Beco quick coupler CW 40 • Hydraulic wedge • Lifting hook Condition: Used Iisdez S E Dzspfx Aphjh

Condition: used, machine/vehicle number: 008106, Max. panel width: 900 mm Iisdpfx Aey Dq Hcsphsh Max. panel length: 2500 mm Introduction system: with pushers