Used Kramer 5035 for sale (135)

Condition: used, Year of construction: 1984, Intake diameter: 160 mm Discharge diameter: 160 mm Flow rate: 2500 m³/h Motor power: 2.2 kW Kdjdpfx Aswm Nr Asg Asu Weight: 50 kg

Condition: excellent (used), Year of construction: 2000, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system, Cartridge dust extraction system Kdodpfx Ajw Nhbmog Asu -Filter system -Filter frame: 2135/2135/H2030 mm -Vibration motor: 0.55 kW -Funnel frame: 2100/2130/H2330 mm -Discharge gear motor: 2.2 kW 8.7 rpm -Opening: Ø 250 mm / 250 x 220 mm -Individual components: see photos, without extraction fan -Weight: 320 kg / 890 kg

Condition: used, Swivel bending machine KRAMER, type A-Maut. II 1000 Manufacturer’s serial number: 48 287, year of manufacture: 1990 Useful length: 1060 mm Maximum sheet thickness: 3.75 mm Stroke of the upper die: 180 mm Adjustability of the bending die: 60 mm Rear stop: 480 mm Drive power of the bending die drive: 4 kW Drive power of the upper die drive: 1.5 kW Mains connection: 400 volts, 50 Hz - Manual and semi-automatic control Kdsdpfx Agsfnabys Aju - Angle setting via angle pre-selection dial - One-piece pointed beam, 135° - Rear stop with hand crank adjustment and simple measuring scale - Continuous stop rail - Electric foot switch, 3-way Space requirement: L x W x H: 2200 x 1350 x 1500 mm Weight: approx. 2.3 tons Good condition

Condition: used, Grinder Manufacturer: Kramer Grebe Wetter Model: Grinder 160mm Integrated lift for ergonomic operation Made of stainless steel Lowest noise level Easy cleaning Rated power: 36 kW Control voltage: 24/230 V Kjdpfx Ajxmg R Teg Aedu Operating voltage: 400 V / 50 Hz Total nominal current: 63 A Fuse protection: 80 A

Condition: good (used), functionality: fully functional, Year of construction: 1975, Three-roll plate bending machine by Kramer, model RH III 80 x 1000. Working length: 1000 mm. Roll diameter: 80 mm. Kodpfx Asww I Tmeg Aodu

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: Lehmann electrol 5035, turning diameter over cross slide: 914 mm, turning diameter: 914 mm, center height: 647 mm, turning diameter over top slide: 914 mm, spindle bore: 409 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 10 rpm, turning diameter over bed slide: 1,295 mm, overall weight: 18,636 kg, swing diameter over cross slide: 914 mm, total height: 2,100 mm, total length: 5,500 mm, total width: 2,320 mm, air pressure: 7 bar, distance between centers: 2,844 mm, 16 1/8" Lehmann Hollow spindle Oil country Manual Lathe machine 5035 with attachments Semi-automatic threading system ,Taper Attachment,front & rear Chucks 36” 4-jaw, 16 ¼ hole Kdodpfx Aotp T Azjg Asu Swing Over Bed Ways 51” - Swing Over Cross Slide 36” - Distance Between Centers 112” - Motor 75 HP 500 RPM Model: Lehmann electrol 5035 Serial No: 501616-010 input voltage : 3 phase -380 - 460 V Manufacturer : Lehmann -USA Manufacturing date : 1982 Weight: 41,000 lbs.

Condition: used, Grinder with mixer Manufacturer: Kramer Grebe Wetter Kjdpfx Asw Idzgsg Asdu Model: Grinder 130mm Made of stainless steel Lowest noise level Easy cleaning Hopper volume: 245 liters Voltage: 400V 50Hz Weight: 850kg

Year of construction: 1985, condition: good (used), machine/vehicle number: xxxx, Technical specifications: - Bending and rolling processes performed manually, - Max. working width: 1020 mm - Max. material thickness (St 40): 1.25 mm - Bending angle adjustment via end stop: 10 - 180° - Max. stroke of the upper die: approx. 85 mm Kdsdpfx Agjf S Tg Ts Aeu - Max. adjustability of the bending die: 20 mm - Shaft diameter: 55 mm - Upper shaft can be pivoted outwards - Rear shaft can be adjusted parallel and at an angle - Space requirement: approx. W 1500 x H 1400 x D 750 mm - Weight: approx. 400 kg

Condition: used, Year of construction: 2020, operating hours: 5,035 h, Internal vehicle number: VTC30051 Available immediately at our yard in Kaufungen. More information: Luis Lucena Viktoria Sologubova CAT 330 crawler excavator with OilQuick – 30.8 tonnes – 5,035 operating hours German CAT 330 crawler excavator, manufactured in 2020, with 5,035 operating hours. The machine has an operating weight of 30,800 kg and is equipped with a CAT C7.1 ACERT engine and a hydraulic OilQuick quick-change system. Technical data: * Vehicle number: VTC30051 * Vehicle condition: Used machine * Category: Crawler excavator * Manufacturer: Caterpillar * Model: CAT 330 * Year of manufacture: 2020 * Operating hours: 5,035 hrs * Operating weight: 30,800 kg * German vehicle Ksdszwitxopfx Ag Aodu Engine and hydraulics: * CAT C7.1 ACERT diesel engine * Hydraulic drive * Hydraulic lines on the boom * Auxiliary hydraulics for attachments * Hydraulic OilQuick quick-change system Equipment: * OilQuick quick-change system * Crawler undercarriage * Enclosed operator’s cab * Cab protection grille * Work lights * Rearview mirrors * Generous access panels for maintenance Information about the OilQuick quick-change system according to the nameplate: * Manufacturer: OilQuick Deutschland GmbH * Hydraulic quick-change system * Year of manufacture: 2020 * Designed for carrier machines up to a maximum of 45 tonnes * CE marking available The hydraulic OilQuick quick-change system enables quick changes of suitable attachments directly from the operator's cab. Use is permitted only with matching OilQuick adapter plates of the same size and in accordance with the manufacturer's instructions. Inspection and functional testing are possible by prior appointment. Further information, photos and videos are available upon request. Errors, changes and prior sale reserved. Financing example: * Internal number:

Condition: used, Throughput depending on material type, speed, and cutting set Capacity: up to 4.000 kg/h Main motor power: 10KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Kedpou H Af Usfx Ag Aodu Lenght: 90 Height: 115

Condition: new, Year of construction: 2023, For inquiries regarding the attachment, please contact Mr. Herden (at the telephone number provided). Bema 20 BK Sweeper / by Kramer 5040 / Year of manufacture: 2023 / New / In stock & immediately available Price: €5,490.00 net / €6,533.10 gross - Working width 1250 mm - Weight 348 kg - Max. flow rate (l/min) 80 - Max. working pressure (bar) 180 - Minimum hydraulic output of the carrier vehicle 20 l/min - Volume / weight of the dirt collection container 135 l / 60 kg Equipment: - Water spray system (main sweeping roller, side sweeping brush) - Side sweeping brush - Hydraulic dirt collection container We have a very large selection of various attachments in our warehouse, which are immediately available! Mr. Herden (at the telephone number provided) will be happy to assist you. On request, we will also be happy to provide you with a financing offer. Kjdpoznrycofx Ag Ajdu We are an official DMS sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. We are an official Westtech sales and service partner. We are an official Weber MT sales and service partner. We are an official Magni telescopic loader sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. !!Errors and prior sale excepted!! Internal ID: 110181 = Further information = Intended use: Grounds maintenance Unladen weight: 348 kg Working width: 125 cm Please contact Marius Herden for further information.

Condition: good (used), We offer you steel tanks for storing almost all common liquid media. We have all available sizes, from 1,000 liters to 100,000 liters, constantly in stock. No matter how you want your tank to be equipped, we will implement your wishes and comply with official regulations at fair prices. Kdodegx E Uhepfx Ag Aeu Whether it's an inner lining, 2-component epoxy coating, exterior paint, installation or modification of fittings, DEKRA inspection, loading, and transport – we are the right partner for you.

Condition: used, Year of construction: 2019, operating hours: 685 h, Equipment: all wheel drive, * Tow hitch * Operator’s suspension seat Ksdpfxozztbhj Ag Aedu Design: ROPS operator’s cabin with heating, Yanmar 3-cylinder diesel engine, 24.1 kW, hydrostatic drive, all-wheel steering, hydraulic quick-change system. Accessories: 1 bucket (0.35 m³) with teeth, pallet fork / 1,000 kg Sale only to commercial businesses. IN THE EVENT OF EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE. INCLUDES EQUIPMENT + ACCESSORIES. Our general terms and conditions (see imprint) form the basis of all purchase agreements, invoices, proforma invoices, orders, and sales negotiations.

Condition: used, mileage: 19,000 km, power: 100 kW (135.96 HP), first registration: 05/2000, overall weight: 7,495 kg, fuel type: diesel, color: red, next inspection (TÜV): 09/2027, gearing type: mechanical, emission class: euro2, loading space width: 2,290 mm, loading space length: 2,870 mm, loading space height: 1,600 mm, Year of construction: 2000, total length: 6,430 mm, total width: 2,400 mm, total height: 2,960 mm, number of seats: 9, Equipment: ABS, parking heater, First owner. Small volunteer fire department; it will remain fully operational at the fire station until the new vehicle is delivered in the summer of 2026. Originally driven only just under 19,000 kilometers. The vehicle passed its technical inspection (TÜV) without any issues on September 1, 2026, and was immediately approved for continued use. Valid until 09/2027. Last service at 18,138 km, with "no defects found." Maintenance was always performed exclusively at the local Iveco/Fiat authorized workshop, and this was consistently done until recently. 9 seats. WEBASTO AirTop 32 S auxiliary heating system. Fire engine LF 8/6 with a MAGIRUS superstructure, manufactured in 2000. 600-liter water tank. Equipped with a tank heating system. Rear pump FP 8/8 with 118 operating hours. Lighting mast located between the superstructure and the cabin. 24-volt and compressed air connection on the driver's side step. Engine: Iveco 4-cylinder inline diesel engine with 3908 ccm, Euro 2 emission standard; it starts and runs perfectly. 6-speed manual transmission. Differential lock on the rear axle. Maximum speed of 86 km/h, according to the vehicle registration documents. Robust truck chassis with leaf spring suspension. Power steering. ABS and ASR (Anti-Slip Regulation). Radio. Electrically adjustable exterior mirrors. Unladen weight according to vehicle registration documents: 5035 kg. Permissible total weight: 7495 kg. Overall vehicle dimensions: Length: 6430 mm / Width 2400 mm / Height 2960 mm. The box body has a main compartment measuring approximately 2.87 m long / 2.29 m wide / 1.60 m high. The roof is walkable, with a large storage box on the left side; the box lid is easy to open and close thanks to gas-filled struts. Interchangeable tow hitch with a 2000 kg braked trailer load or 1500 kg unbraked trailer load (ball and pintle hitch). Tires: MICHELIN with snow flake symbol, DOT code 2020. Size: 205/75R17.5. Condition: 6 tires are almost new. Batteries: 2x NEW in 2025. Prepared for digital radio communication. The special warning lights with front flashers are functional. The Martin horn has been removed and is no longer available. The fire engine has minor signs of wear and is generally well-maintained. The vehicle was handed over to us in a ready-to-use condition after being taken out of service. The Iveco with MAGIRUS-Weisweil superstructure is immediately available here. The necessary manuals with wiring diagrams and some documents are included; the service booklet was only filled out at the beginning, but all essential original documents from Iveco are available. There are 2 original Iveco vehicle keys that operate smoothly and identically in all 4 doors and also in the ignition lock. The compartment door locks and flaps are all easy to open and close. The Iveco has recently received several new parts. According to the mayor, this vehicle has not been involved in any accidents. The vehicle is explicitly offered here as an "operational vehicle." If the vehicle is not put back into service as an operational vehicle in the future, the special warning lights must be completely removed, and all vehicle markings must be removed. This offer is only valid for commercial enterprises and freelancers of all kinds, as well as for authorities and emergency services (BOS) of all kinds. Sales to purely private end consumers are excluded. Subject to prior sale and erroneous information. The offer is subject to §25 Kodszpgphspfx Ag Ajdu

Condition: excellent (used), Side tipping bucket, wheel loader bucket, earth shovel -Manufacturer: Kramer, wheel loader shovel, wheel loader shovel, heavy duty, very stable -Bucket width: 1650 mm -Inner mounting width: 865 mm -Hole: bore Ø 40 / 50 mm, dimensions see photos -Holders: for ripper teeth -Dimensions: 760/1650/H770 mm Kjdpettc S Rofx Ag Aedu -Weight: 240kg -Own weight: 480 kg

Condition: good (used), 4/3 directional valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: Krämer Grebe Control block from Tiromat 3000/430 vacuum packaging system -Valves: PMV-D 40/40 BL / PMV-D 25/32-BL / BVB-S 25/40 -Individual components: see photos -Overall dimensions: 500/460/H190 mm Ksdpshvfzcefx Ag Asdu -Weight: 19 kg

Condition: used, 4/3-way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: Kramer Grebe control block from vacuum packaging system Tiromat 3000/430 -Valves: airtec MS 01 / airtec MO 04 310-HN -Valves: IWN PMV-D 40/40-BL / PMV-D 25/32-BL / BVB-S 25/40-1 Kodpfehuf Ihsx Ag Asdu -Individual components: see photos -Total dimensions: 500/420/H185 mm -Weight: 18,7 kg

Condition: used, Year of construction: 2025, VLS Compakt Kramer, suitable for Kramer 8085T / KL37.8T, 2 m working width, 6 cutting tines, wall removal. Kdodpfx Ajz Sb Htsg Aou

Condition: used, 4/3-way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve Kedpfx Aohuf Itog Asdu -Manufacturer: Kramer Grebe control block from vacuum packaging system Tiromat 3000/430 -Pressure switch: Herion 0 880 100 -Valves: IWN RMD-53/44 / BVB-F 25/40-1 / PMV-DR 20/40-P -Individual components: see photos -Total dimensions: 450/250/H330 mm -Weight: 13.5 kg

Condition: used, 4/3-way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: Kramer Grebe control block from vacuum packaging system Tiromat 3000/430 -Pressure switch: Herion 0 880 100 -Valves: PMV-D 25/32 BL / PMV-D 40/40 BL Kedpfx Agshvfzro Ajdu -Individual components: see photos -Total dimensions: 440/380/H230 mm -Weight: 11.3kg

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 150 350, total height: 4,600 mm, ram adjustment: 150 mm, installation height: 550 mm, table height: 1,000 mm, total width: 3,000 mm, total length: 4,200 mm, drop-through hole in table: 1,400 mm, table length: 3,000 mm, table width: 1,250 mm, pressing force: 250 t, control cabinet height: 2,000 mm, control cabinet length: 6,800 mm, control cabinet width: 600 mm, type of input current: three-phase, stroke length: 180 mm, stroke adjustment: 20 mm, input voltage: 400 V, distance between side stands: 810 mm, distance between stands: 2,020 mm, overall weight: 45,000 kg, control voltage: 24 V, year of last overhaul: 2026, input frequency: 50 Hz, ATTENTION: The machine will be completely cleaned before delivery. Fairings will be repaired if possible and deemed appropriate. Pressing force: 2500 kN Adjustable stroke: 40 - 180 mm Ram adjustment: 150 mm Stroke rate: 20 - 150/min Kjdpfszrwzaox Ag Aodu Installation height for tool: 550 mm Table dimensions: 2000 x 1250 mm Ram dimensions: 2000 x 1000 mm New control system: SIEMENS S7 300, 1st generation, control system designed according to VW specifications. Upon request, the machine can also be completely overhauled by ANDRITZ Kaiser, with a new S7 1500 control system.

Condition: good (used), Year of construction: 1957, We are offering this well-maintained Vollmer CNE sharpening machine, manufactured in 1957, for sale. The machine is suitable for sharpening circular saws and band saws. Kedjzzxzgspfx Ag Ajdu Several grinding wheels are included. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), Throughput depending on material type, speed, and cutting set Capacity: up to 4.000 kg/h Main motor power: 10KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Kedped S U E Rofx Ag Ajdu Width: 110 Lenght: 90 Height: 115 Delivery time: 10 working days after advanced payment

Condition: good (used), Year of construction: 2010, load capacity: 2,000 kg, fuel type: diesel, power: 30 kW (40.79 HP), gearing type: automatic, overall weight: 3,345 kg, We are offering this used Linde H20D-01 forklift, manufactured in 2010. Manufacturer: Linde Material Handling Model: H20D-01 Serial number: H2X392A01044 Year of manufacture: 2010 Rated load capacity: 2000 kg Unladen weight: 3345 kg Battery voltage: V Rated drive power: 30 kW Kedpfx Aozzx D Uog Aedu Mast with hydraulic forks Full cabin with heating Work lights at the front and rear SE tires If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: new, Year of construction: 2023, VK reduced from 3200 to 2900 Wilkens 08/03/2026 2.00m working width, Kramer quick-attach system, 9 tines, 1.1 cbm volume, new machine with paint damage. Kjdpfxoz Sa Sgj Ag Aedu