Used Kramer Grebe Meat Mincer for sale (1,838)

Condition: ready for operation (used), max. working width: 2040 mm for metal sheets up to: 2 mm opening width top clamping bar: 90 mm Bsdsd Rbz Topfx Af Hown adjustment bending cheek: 90 mm clamping bar drive: 1,5 kW below cheek drive: 4 kW electrical connection: 380 V kW weight: 2600 kg space needed: 3050 x 800 x 1350 mm

Year of construction: 1972, condition: used, machine/vehicle number: 32 416, max. working width: 1530 mm for metal sheets up to: 2,5 mm opening width top clamping bar: 290 mm adjustment bending cheek: 90 mm clamping bar drive: 1,1 kW below cheek drive: 3 kW rear stop: ja mm weight: 2200 kg Bwsdpjy Np Aefx Af Hen space needed: 800x3000x1380 mm

Condition: used, Inlet diameter: 250 mm Outlet diameter: 250 mm Volume flow: 5,000 m³/h Motor power: 5.5 kW Weight: 100 kg Bwsdpfx Aoyvz Rvof Hon

Year of construction: 1987, condition: ready for operation (used), A three-roll plate bending machine Kramer is available. Working width: 2000mm, max. plate thickness: 3mm, power: 3kW. An on-site inspection is possible. Bwedpfx Afjyttv Ro Hen

Condition: used, Year of construction: 1984, Intake diameter: 160 mm Discharge diameter: 160 mm Flow rate: 2500 m³/h Bedpfxewm Nr Ao Af Hjwn Motor power: 2.2 kW Weight: 50 kg

Condition: used, Year of construction: 1979, Intake diameter: 300 mm Bwedowm Nrvepfx Af Hjn Discharge diameter: 300 mm Flow rate: 5400 m³/h Motor power: 2.5 kW Weight: 100 kg

Condition: used, Hand - swing bending machine KRAMER type AMS 650 x 1,5 Hand swivel bending machine, press brake year of construction approx. 1985 working length 650 mm Bjdpfx Afodzqaao Hswn sheet thickness at 40 kg/mm2 1,5 mm upper beam opening approx. 60 mm bending beam adjustment ca- 0-25 mm bending angle 0-180 - Upper beam adjustment via hand crank - pre-screw rail for the bending beam - one-piece sharpening rail 135° space requirement L x W x H 1200 x 600 x 1100 mm weight 160 kg good condition

Condition: ready for operation (used), Year of construction: 2009, A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible. Bsdpfxsxl Elgs Af Hswn

Condition: good (used), functionality: fully functional, power: 24 kW (32.63 HP), fuel type: diesel, empty load weight: 2,300 kg, Year of construction: 2006, operating hours: 2,702 h, Equipment: all wheel drive, cabin, pallet forks, Yard loader / wheel loader KRAMER 180 (340) Year of manufacture: 2006 According to the hour meter: 2,702 operating hours 23.5 kW only 2,300 kg - incl. bucket - incl. forks - hydraulic quick coupler - auxiliary hydraulic circuit up to fork carrier - cab with heating - lighting system - joystick controls - 4-wheel steering - immediately ready for operation! Bedpfxoylubxs Af Hjwn - incl. Luxembourg documents! Sale price: €17,900 net Affordable delivery possible!

Condition: used, operating hours: 8,550 h, Equipment: all wheel drive, * Deutz Engine: TD 2011 L04 W * Telescopic * Work lights front and rear * Differential lock Bsdpfjwuzaujx Af Hswn * 2 hydraulic connections at the front * 1 hydraulic connection at the rear * Rabbit & turtle gear ranges * JVC radio * Rear power socket * Vibration damper * All-wheel steering ----* Tire size: 600/50 R 22.5 * Operating hours: 8,550 h ----Internal vehicle number: 7175-----We are happy to assist you with all formalities related to vehicle purchase, providing support and advice. Just let us know your wishes and requirements and we will take care of the rest. Additionally, we can offer you the following services for an extra charge: * Trade-in of your old vehicle * TÜV/commercial vehicle inspection * Complete export processing * Financing mediation * Application for export license plates * Vehicle transport * Vehicle registration YOUR VTS TEAM WhatsApp support available! If you have any questions about the vehicle or would like further information, please feel free to contact us easily via WhatsApp. WhatsApp WhatsApp

Condition: good (used), Year of construction: 1988, Radial fan, radial blower, radial fan, chip extraction blower, fan, extraction, chip blower, high-performance fan -Manufacturer: Krämer, Radial fan, chip extraction blower, fan type VFM-K -Volume flow rate: 4500 m³/h -Motor: AEG 4 kW 2870 rpm -Inlet connection: Ø 250 mm -Output connection: 235 x 210 mm -Fan wheel: Ø 400 x 160 mm -Overall dimensions: 705/610/H785 mm Bwsdswrb Srepfx Af Hsn -Weight: 95 kg

Condition: excellent (used), Side tipping bucket, wheel loader bucket, earth shovel -Manufacturer: Kramer, wheel loader shovel, wheel loader shovel, heavy duty, very stable -Bucket width: 1650 mm -Inner mounting width: 865 mm -Hole: bore Ø 40 / 50 mm, dimensions see photos -Holders: for ripper teeth Bjdpfx Afsttc S Rj Hjwn -Dimensions: 760/1650/H770 mm -Weight: 240kg -Own weight: 480 kg

Condition: excellent (used), Kramer SBMM 70 Kramer SBMM 70 beading machine edging machine, slitting machine, roller Manufacturer: Kramer type: SBMM 70 max. plate thickness: 1.75 Cylinder center distance: 70 mm Maximum working depth: 280 mm Drive power: 1.1 kW Operating speed: 4.5/9 meters/minute constant. Operating speed with stepless drive: 2.5-21 mm shaft diameter Weight: 190 kg Bwedpfx Ajra Nw Iof Hjn ​

Condition: used, Swivel bending machine KRAMER type A-Maut. II 1000 No. 48 287 Year of construction 1990 effective length 1060 mm max. sheet thickness 3.75 mm Stroke of upper beam 180 mm Adjustability of the folding beam 60 mm Backgauge 480 mm Drive power of folding beam drive 4 kW Drive power upper beam drive 1.5 kW Mains connection 400 Volt, 50 Hz - Manual and semi-automatic control - Angle adjustment via angle preselection disk - one-piece pointing rail 135° - backgauge with hand crank adjustment and simple measuring scale - Continuous fence rail - Electric foot switch, 3-position Space requirement L x W x H 2200 x 1350 x 1500 mm Bodpfjfnabysx Af Hswn Weight approx. 2.3 tons good condition

Condition: good (used), We offer steel tanks for the storage of almost all common liquid media. We have all available sizes from 1000 liters - 100,000 liters permanently in stock. No matter how your tank is to be equipped, we will implement your wishes and the official regulations at fair prices. Whether you need an inner shell, 2K epoxy coating, exterior paint, fitting extensions or conversions, DEKRA approval, loading and transportation - we are the right partner for you. Bwodpjgx E Uhofx Af Hjn

Condition: used, Year of construction: 1981, sheet width 1020 mm plate thickness 1,5 mm daylight opening max. 85 mm weight of the machine ca. 240 kg Bwodoxbtrtepfx Af Hon Smallest bending width factor 10 x sheet thickness s Smallest inner radius factor 1.5-2 x sheet thickness s Lowering capability of the lower and bending beams 20 mm On this swing-beam bending machine, the beams and side stands are reinforced with particularly strong ribbing. The cross-sections are designed to be strong enough to bend even narrow offsets. On the AML 1000 model, the bending beam is balanced by a gas pressure spring. The opening width of the upper beam and the lowerability of the lower and bending beams are generously dimensioned. The machine is being sold as defective because the connection between the lower frame and the right side stand is broken (see photo taken from behind)!

Condition: used, power: 110 kW (149.56 HP), Year of construction: 2018, operating hours: 4,800 h,

Condition: used, empty load weight: 4,940 kg, maximum load weight: 13,060 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/1994, loading space volume: 10 m³, suspension: steel, tire size: 385/65R22.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, SAF axles, turntable, leaf suspension, ABS (anti-lock braking system), U-protection, side aluminum driving protection, rotating beacon, rear outlet Superstructure: Müller tank superstructure type WM A 100 with 10,000 l tank capacity for transporting faeces 2x 9 t SAF axles, drum brakes! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Bwsdpevhihbofx Af Hsn

Condition: used, mileage: 1,001 km, power: 15 kW (20.39 HP), gearing type: other, fuel type: diesel, color: grey, empty load weight: 1,600 kg, number of seats: 2, first registration: 07/1938, Year of construction: 1938, driver cabin: other, Equipment: trailer coupling, Vehicle location: Bovenden, Manufacturer/Brand: Kramer Model series: K-series Model: K 18 (K 18 M) Construction: Carrying frame Production period: 1936?1950 Number of units: 6768 Dimensions Dead weight: 1650 kg Length: 2820 mm Width: 1450 mm Height: 1440 mm Wheelbase: 1800 mm Ground clearance: 250 mm Track width: 1250 mm front: 1250 mm Rear: 1250 mm Turning radius without steering brake: 2500 mm Standard tires: front: 5.50 x 16 rear: 8.00 x 20 Engine Rated power: 11.7-14.6 kW, 16?20 hp Rated speed: 1500 rpm Bwsdpsvhlklofx Af Hsn Number of cylinders: 1 Displacement: 1639 cm³ Fuel: Diesel Cooling system: Evaporative cooling Drive system Drive type: Rear-wheel drive Gearbox: 4/1 gearbox Maximum speed: 15 km/h ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Year of construction: 1985, condition: good (used), machine/vehicle number: xxxx, Technical data: - Bending operation and rolling operation by hand, - max. working width 1020 mm - max. material thickness St 40 1,25 mm - bending angle adjustment via end stop 10 - 180 ° - max. stroke upper beam approx. 85 mm - max. adjustability bending beam 20 mm Bwodpfxof S Tg To Af Hen - shaft diameter 55 mm - upper shaft swivels out - rear shaft parallel + inclined adjustable - space requirement approx. W 1500 x H 1400 x D 750 mm - weight approx. 400 kg

Condition: excellent (used), Height 360 cm Length 240 cm Width 220 cm 2.5 kW motor Bwodort Tt Dopfx Af Hsn 4,800 m³h

Condition: used, Year of construction: 1988, machine/vehicle number: 46922, sheet width:2.050 mm plate thickness:1,5 mm distance between columns:2100 mm column arm:100 mm table width:300 mm number of strokes - loaded:50 total power requirement:4,0 KW weight of the machine ca.:1,85 t Bwodpfx Aocxxrasf Hjn

Condition: used, Year of construction: 1985, sheet thickness: 2,25total power requirements: 1,1sheet length: 2025 Bjdpfjvaatfex Af Hewn Working length: 2025 mm Kl. Tail width: 5 x s Kl. Inner radius: 1.5 - 2 x s Adjustability of the lower and bending beams: 90 mm for round bends: 90 mm Highest working position of the upper beam: 190 mm large opening width of the upper beam: 290 mm Duration of a workflow: 7.0 sec. External dimensions approx.: 3000 x 1000 x 1650 mm with: - Control panel on the right side of the machine - Simple bending angle adjustment on the control panel - Choice of switching to automatic, semi-automatic or typing mode - Potentiometer for degree adjustment -Foot switch used, in good condition

Condition: used, sheet length: 1050width: 800heigth: 1400sheet thickness: 3 Bsdpfxsvaar Is Af Hewn Bending Machine - Dimensions (L x W x H): approx. 210 cm x 80 cm x 140 cm - Working width: approx. 105 cm

Condition: excellent (used), Meat grinder Omega 32. Wihout stand 1900 € Bedpjx Ndqrofx Af Hown With stand 2100 €