Used Leuze Lumiflex Uls-5 for sale (59,875)

Condition: used, Year of construction: 2020, operating hours: 4,800 h, functionality: fully functional, travel distance X-axis: 905 mm, travel distance Y-axis: 705 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 3,000 kg, total height: 3,400 mm, total width: 2,100 mm, total length: 3,425 mm, table width: 850 mm, quill stroke: 710 mm, type of input current: three-phase, distance table to quill: 250 mm, table length: 1,150 mm, warranty duration: 6 months, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 15 m/min, input voltage: 400 V, overall weight: 7,500 kg, year of last overhaul: 2026, table load: 3,000 kg, input frequency: 50 Hz, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 15 m/min, Equipment: documentation/manual, EDM314MF30 + AWEX50/5 MF30 control panel Year of manufacture: 2020 Operating hours: 4800 h Overhauled Travel ranges XxYxZ: 905/1020 x 705 x 455 mm Work table: 1150 x 850 mm (steel table with T-slots) Work tank: 1200 x 900 mm Filling level of work tank: 500 mm Electrode weight, max.: 50/500 kg Workpiece weight: 3000 kg Machine weight: 7500 kg Machine dimensions (W x D x H): 2100 x 3425 x 3450 mm Equipment: Color: Light/Teal gray Tool changer: 30-position, in-machine Automation: AWEX50/5 50 electrode positions 5 pallets UPC 320x320 Cartridge filter system Quick-change chuck EROWA/3R-Macro C-axis: 100 rpm, direct measurement 0.0001 degrees Holding brake in C-axis CO2 extinguishing system K&B Fire protection flap Smoke extraction with activated carbon filter Cooling unit integrated in the machine Manual control panel Automatic tank refill Erosion generator: 60 A Option with booster stage for 120 A erosion power Transportation On-site commissioning Training Lhsdpfx Aioyt Ewgeqol

Condition: refurbished (used), type of cooling: water, welding current (min.): 25 A, welding current (max.): 450 A, Second-hand Röwac PU450 Double Pulse MIG Refurbished, tested, serviced and ready for immediate use 3 Months Warranty Specifications: 25-450 AMP 400 Volt Pulse / Double Pulse Synergic Water-cooled 2/4 Step 4 Roller drive Gas pre flow / Gas post flow Start current / End current Fixed programs / Program memory Elektrode option Including: 4 Meter Welding torch, earth cable with clamp, and gas cable. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. Lsdpezv I Nvefx Aiqohl The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Heidenhain, controller model: iTNC640, table width: 800 mm, table length: 2,700 mm, rotary table diameter: 700 mm, spindle speed (max.): 15,000 rpm, coolant supply: 25 bar, spindle motor power: 46,000 W, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, DEMONSTRATION MACHINE This 5-axis machining center enables the complete machining of long components without the need for re-clamping. It is designed to ensure a high degree of dynamics and speed, despite its high stability and rigidity. The cross slide, traveling column, and bed are made of a steel/welded construction. The large tool magazine, connected to the column, ensures short tool change times. The machining center, "made in Italy," is equipped exclusively with European quality components. Special equipment for the demonstration machine: Lhodpfx Aioz D Erujqsl Kessler milling spindle SK40, 60-position tool magazine, air through the spindle, flushing gun for cleaning the work area (including its own pump), Heidenhain TS460 wireless measuring probe (workpiece measurement), BLUM laser tool measurement, Heidenhain automatic kinematic control, rotating control panel, 25 bar internal coolant system, interface for KNOLL filter system, oil mist extraction Available for immediate delivery. While supplies last.

Condition: good (used), Year of construction: 2001, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 132, spindle speed (min.): 2,700 rpm, table height: 1,800 mm, table diameter: 800 mm, table width: 800 mm, table length: 200 mm, Profile saw for extrusion. Ledpjzw U Tqofx Aiqohl Synchronized with profile speed and cuts… repeated cuts! Ejection… piece counter.

Condition: used, Applicable material: Concrete Cargo space capacity: 60.000 l Polygonmach PVB150 Mobile Cold Asphalt & Emulsion Mixing Plant Turkey’s First Fully Mobile Dual-Mode Plant! Polygonmach PVB150 is a cutting-edge mobile solution specially designed for cold asphalt production, emulsion-based mixes, and road maintenance materials. This powerful system supports Volumetric and Batch operation modes — all in one compact and mobile unit. Whether you’re building rural roads, patching highways, or producing environmentally friendly mixes, the PVB150 delivers performance, flexibility, and cost savings directly to your jobsite. ⸻ ✅ Specialized for Cold Mix & Emulsion Applications • Cold Asphalt Mixing Mode: Up to 200 m³/hour on-demand production, perfect for binderless and emulsion-stabilized mixes • Emulsion Mixing Mode: Precise control for polymer-modified bitumen and emulsified asphalt blends • Low-Temperature Operation: Energy-efficient and ideal for off-grid, rural, or urban environments • Recycling-Ready: Supports RAP (recycled asphalt pavement) and eco-friendly binder integration ⸻ ? Advanced Design – Built for Road Projects • 3x8 m³ aggregate hoppers, 5-ton cement/emulsion silo, and integrated water/additive tanks • High-precision weighing & dosing for binder, aggregate, and water • Fully automatic or manual operation via smart control panel • Mobile frame with self-lifting chassis – set up in 10 minutes • On-site production = zero material waste, no transportation delays ⸻ ?️ Multiple Functions – One Mobile Solution In addition to Cold Asphalt and Emulsion, PVB150 can also operate as: • Mechanical Stabilization Plant • Soil Compound Mixing Plant Lhsdpoykad Aefx Aiqol • Standard Concrete Plant (Volumetric + Batch Modes) ⸻ ? Mobile | Sustainable | High-Performance | Made in Turkey Say goodbye to fixed-site plants and expensive transport. With Polygonmach PVB150, your site becomes your plant. ⸻ ? Contact us today and take control of your road projects! ? ? ?

Condition: excellent (used), Year of construction: 2013, operating hours: 360 h, functionality: fully functional, machine/vehicle number: 377237, Size 74 x 106 cm, CX package for board up to 1.2 mm, Wallscreen, Divetronic, Ergotronic, Qualitronic color control, SIS infeed system, Optical sheet control, FAPC plate change, Varidamp dampening, Blanket wash, Roller wash, Impression cylinder wash, Technotrans High Tech combi Beta.C, Beta F filtering unit, Chamber coater Harris&Bruno for conventional coating, Vary IR/TL dryer in delivery, ALV 3 delivery, Grafix Megatronic powder spray, Logistic system, Machine is elevated by 675mm. Lsdozxf H Rspfx Aiqshl

Condition: good (used), Year of construction: 2014, functionality: fully functional, SYNCROMILL C21-63 OPERATING RANGES Table 1600 mm X 800 mm Travel (X/Y/Z): 700 / 1,000 / 800 mm FEED AXES Speed (X/Y/Z): 75 / 75 / 105 m/min Acceleration (X/Y/Z): 11 / 11 / 17 m/s² MACHINING SPINDLES Lhsdpfx Aisvxpuijqjl No. of spindles: 2 Spindle spacing: 700 mm Power S1/100%: 26 kW Torque S1/100%: 60 Nm Power S6/40%: 35 kW Torque S6/40%: 80 Nm Max. speed: 17,500 Rpm TOOL INTERFACE HSK 63 TOOL MAGAZINE Chip-to-chip time (VDI 2852): 2.9 s Tool positions: 56 Tools atc Tool length: 530 mm Weight: 9 kg Diameter with fully occupied magazine: 85 mm Diameter with empty positions: 175 mm CONTROLLER / INSTALLATION Siemens 840D SL A-axis: ±180° B-axis: 360° Cooling Blum Touch Probe Rotary table 350 MM Xtra Spindle for heavy works Input power: 95 kVA Installation dimensions (L/W/H): 4.6 / 3.4 / 3.2 m Weight: 25,000 kg Additional Equipment Included: 1 x Rotary Table for advanced multi-axis machining 1 x Touch Probe for precise measurement and quality control 1 x Extra Spindle (ready-to-install for maximum uptime) Ready For Delivery. Increased productivity with two spindles operating simultaneously High flexibility for complex parts and multi-side machining Equipped with additional accessories to maximize machine versatility and reduce downtime

Condition: used, machine/vehicle number: 006488, X axis working area: 2500 mm Y axis working area: 850 mm Main Electrospindle power: 5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 11 Ljdpfx Aiewuclxjqjhl

Condition: like new (used), Year of construction: 2019, operating hours: 66 h, functionality: fully functional, Size 60 x 75 cm, Presscenter XL 2, program-controlled wash-up device for inking rollers, blanket wash, and impression cylinder wash, Alcolor Vario dampening system, Combistar air-cooled cooling and recirculation unit, Autoplate, antistatic device in the feeder, double sheet detector, Weko AP 262 powder spray unit, AMS LED UV dryer, maximum paper thickness 0.8 mm, maximum speed 15,000 sheets/h, perfecting 2-3 or 5- Lhedpfeykr Rzsx Aiqol

Condition: used, Year of construction: 2002, functionality: fully functional, We are offering this operational Hundegger K2-5 62.5 mm cutting machine, manufactured in 2002, for sale. The machine was reassembled at the new location by Hundegger in 2021. The safety features have been updated to the latest standards (€17,000) and the machine has been serviced. From 2021 to early 2022, the machine was completely rebuilt by Hundegger and approved for operation. The company declared insolvency in 2025 and the property was sold. Consequently, the K2, including the HEA 200 support beam and chip extraction system (pusher system), was completely dismantled in operational condition and removed from the site by Hundegger. Invoices for the K2 (2002), safety features, saw blade, milling heads, support blocks (2025), etc., can be provided upon request. The K2 was fully functional, preserved, and dismantled at the Hundegger site and is now in storage. Transport requires 2 semi-trailer trucks, approximately 28.5 tons. Loading can be arranged for approximately €4,000. Manufacturer: Hundegger Model: K2-5 625 Year of Manufacture: 2002 Condition: Operational Category ID: 156 Type ID: 2209 Machine Type: Cutting Machine - Undercarriage pivoting miter saw - Universal milling unit, 5-axis (UF5) - Roller cutter - Finger cutter - Dovetail cutter - Combination support for vertically operating tools - 1x Vertical finger milling machine, 5.5 kW - 2x Drilling unit, 2.2 kW Lhsdpfx Aszrazcoiqol Drilling unit, swiveling 30° (3.0 kW) - drilling direction horizontal - Combination support for horizontally operating tools - 1x Drilling unit, 2.2 kW - drilling direction horizontal - 1x Drilling unit, swiveling 30° (3.0 kW) - 1x Grooving unit, 7.5 kW Space available for an additional main unit. Control system: KI 2 – KI 3 Additionally, a cabinet with consumables such as lubricants, grease, and rollers is included. A new roller cutter, dovetail cutter, grooving chain, and replacement cutting inserts for the tools are available, as documented by an invoice for €3,800. All necessary documentation from Hundegger for the installation and operation of the machine is available.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 50 h, functionality: fully functional, overall weight: 8 kg, load capacity: 1 kg, arm reach: 790 mm, controller manufacturer: igus, controller model: iRC, input voltage: 24 V, repeat accuracy: 1 mm, igus robolink® DP 5 DOF articulated arm robot (RL-DP-5) A functional video can be sent upon request. Manufacturer: igus Model: robolink® DP 5 DOF articulated arm (RL-DP-5) Category: Industrial robot / Articulated arm robot Condition: Used machine / Like new (exhibition piece / test operation) Year of manufacture: 2020 Operating hours: approx. 50 hours Location: 6133 Weerberg / Tyrol Availability: Immediate PRICING: ----- Price type: Negotiable Price (net): 3,450,- EUR (plus 20% VAT, if a B2B invoice is desired) Invoice details: VAT can be shown (B2B invoice possible) For sale is a like-new, immediately ready-for-use 5-axis industrial robot (articulated arm) from the renowned igus® brand, part of the proven robolink® DP series (item number: RL-DP-5). The system was used exclusively for a short laboratory or test project and has only approximately 50 operating hours. The robot is in flawless, absolutely like-new condition, both technically and visually. Thanks to the integrated absolute value encoders on the stepper motors, the arm does not lose its current position even after a power failure, emergency stop, or restart. Complex reference runs are therefore not necessary during ongoing operation. SCOPE OF DELIVERY & SYSTEM PACKAGE: • Articulated arm: igus robolink® DP 5 DOF with backlash-free drylin® gears, stepper motors, and encoders. • Control electronics: Modular DIN rail version (complete control computer for mounting in a control cabinet). • Software: Original royalty-free igus iRC (igus Robot Control) programming software (free download for intuitive, easy programming on a PC). • Free test accessories: A fully functional, self-built vacuum gripper is included in the package as a free addition for immediate testing and training. TECHNICAL PARAMETERS: • Degrees of freedom / axes: 5 DOF • Payload: 0.5 kg (nominal) to max. 1.0 kg (depending on the working area) Ljdpfxozl N Tus Aiqohl • Reach: approx. 790 mm • Swivel range (axis 1): 360° • Control: igus Robot Control (iRC) – DIN rail control computer • Voltage supply: 24 V DC (approx. 12 A) • Interfaces: 7 digital inputs and outputs (I/Os) for peripherals & gripper • Weight (articulated arm): extremely light 7.94 kg • Repeatability: +/- 1.0 mm CONDITION / INSPECTION: The device is currently ready for operation and can be demonstrated and tested on site if desired. HANDLING & SHIPPING: • Collection preferred (postal code: [Your postal code]) • Insured shipping via a freight forwarder or parcel service in a robust transport box is possible after consultation and upon assumption of costs. • A proper B2B invoice with VAT can be issued upon request. If you are interested or have questions about technical integration, please contact us directly via the message function. ----- Legal notes for used machines: The sale is preferably made to commercial enterprises (B2B) with the exclusion of any warranty, guarantee, and liability for defects. Subject to prior sale.

Condition: used, functionality: fully functional, Year of construction: 1991, operating hours: 4,950 h, power: 139.74 kW (189.99 HP), color: green, total height: 4,089 mm, total length: 9,728 mm, total width: 4,572 mm, 1991 | John Deere 9500 | Used Combine Harvester | 4,950 hours Location: Michigan, United States Shipping available to your destination. Shipping rates can be calculated instantly. About this machine: John Deere combine harvester with a 190 hp diesel engine, 7,164 L grain tank, 17 ft unloading auger, straw chopper, and chaff spreader. Equipped with PRWD, 30.5-32 and 18.4-26 tires, and factory grain bin extension. ✔ PRWD ✔ 30.5-32 tires ✔ 18.4-26 tires ✔ 17 ft unloading auger ✔ Factory grain bin extension ✔ Straw chopper ✔ Chaff spreader ✔ 2 WD live front axle ✔ Conventional walker configuration Lhedpfxsz Ebxyo Aiqel ✔ Rasp bar cylinder Key specs: Engine power: 190 hp Engine hours: 4,950 hr Operating weight: 9,190 kg (20,260.5 lb) Grain tank capacity: 7,164 L (203.3 bu) Unloading rate: 2.6 bu/sec (90.4 L/sec) Unloading auger length: 17 ft (5.2 m) Fuel tank: 530 L Engine displacement: 7.6 L Combine type: Corn/Bean, Walker (conventional) Dimensions (L × W × H): 9,728 × 4,572 × 4,089 mm What buyers get with us: ✔ No buyer fees ✔ Verified sellers ✔ Make offer ✔ Instant shipping rates without registration ✔ Pre-sale inspection ✔ Documentation support ✔ Secure transaction on every purchase

Year of construction: 2021, operating hours: 5,297 h, condition: used, functionality: fully functional, machine/vehicle number: 200/751/15-21/6HE-35-40P/450, Complete drying system, consisting of 1 Harter Airgenex 20,000 dehumidification module and 2 TS 1800-5 drying chambers, each with 5 pull-out drawers with vacuum extractors, insulated air ducts, and an additional circulating air fan. The system is designed for drying XPS panels coated with mortar and glass fiber mesh without warping. Year of manufacture: 2021. The drying chambers are very robustly manufactured by Sondermaschinenbau Bannik. The system is also sold as individual components; an inspection is possible. The refrigerant has been evacuated and is stored separately in a steel cylinder (20 kg). Price negotiable. Lhsdpozmw Hlsfx Aiqol

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, 1x Professional high-volume shredder from Ideal, model: 4606 CC, security level: P-5 - with oiler. Used only a few times! Lhedpfxjzz R E Do Aiqel In very good, fully functional condition, manufactured in 2024. Price quoted net, plus VAT. Shipping possible upon request, subject to an additional charge.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 1131578, SPECIFICATION Trunnion table size 630mm x 500mm X axis traverse 762mm Y axis traverse 508mm Z axis traverse 508mm B axis tilt +110 deg -35 deg C axis rotation 360 degree Spindle BT 40 Spindle speeds 0-15,000rpm Spindle motor 22.4kW Rapid feed rate X, Y, Z axis 30.5/min Rapid feed rate B, C axis 150 degrees a second Toolchanger capacity 40 + 1 Tools Approx. weight 8900kg   MACHINE EQUIPPED WITH: - Haas CNC Control System Through Spindle Coolant, with Auxiliary Filtration Swarf Conveyor Renishaw Wireless Intuitive Probing System Lsdpfx Aezr Nf Dsiqshl High Speed Machining Lighting Enclosed Guarding

Condition: good (used), input voltage: 380 V, type of input current: three-phase, pressing force: 50 t, stroke length: 100 mm, Used hydraulic press brake Brand: Ajial Colly Model: 502 H-5 Bending length: 2100mm Pressing force: 50 tons Stroke: 100mm Motor: 5.5Hp (Three-phase 380V) Up and down movement controlled by foot pedal. Includes: Lhjdpfx Aoz Duldoiqjl - Ajial 85º punch set, 2000mm - Multi-V die, 54x54mm, 2000mm + 1 additional section for testing, with some defective V-shapes (See die on the floor)

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 2,110 h, functionality: fully functional, machine/vehicle number: 7846, travel distance X-axis: 455 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 800 kg, total height: 2,600 mm, total width: 2,160 mm, total length: 2,600 mm, table width: 400 mm, type of input current: three-phase, distance table to quill: 450 mm, table length: 820 mm, warranty duration: 12 months, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 15 m/min, input voltage: 400 V, overall weight: 2,800 kg, table load: 800 kg, input frequency: 50 Hz, Equipment: documentation/manual, EDM312MF30 + AWEX100/5 100 electrode positions 5 pallet positions 320x320mm Operating hours: 2110 h Technical data: Ljdpfjxlchfex Aiqshl Travel paths: 455x300x300mm Workpiece clamping table: 820x400mm Tank dimensions: 900x520mm Filling height: 300mm Distance between table/electrode holder: 150/450mm Max. workpiece weight: 800 kg Maximum dielectric volume: 700 liters Dimensions (W x D x H): 2160x2000x2610mm Machine weight: 2500 kg Power connection: 3/N/PE 400/230V 50Hz Power consumption: 6.7 kVA Equipment: Color: light grey MF30 V3.2 operator interface Touch screen display Exogen generator 60A Direct measuring system on all axes Cartridge filter Integrated cooling unit CO₂ extinguishing system C-axis 100/min with holding brake Handheld control unit with enabling button Lowerable tank, automatic positioning Erowa chuck 12-month warranty Transport On-site commissioning Training

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Heidelberg CX 102 - 5 + LX - 2019 Year of Manufacture : 2019 Impression Count : ONLY 58 mio imp. ! 5 colors + coater offset press of size 72 x 102 cm MADE IN GERMANY equipped with: • Heidelberg AUTOPLATE PRO (Fully Automatic Plate Change) • INPRESS CONTROL 2 (Inline Color and Register Measurement System) • WALLSCREEN XL Ledpfx Aozcby Aeiqjhl • SPEED : 16.500 Sheets Per Hour • COATING UNIT with chambered doctor blade and Anilox Roller • Extended Delivery (X2) • Infra-Red DRYER DRYSTAR in Delivery • PRINECT PRESS CENTER XL 2 • PRESET PLUS Feeder • PRESET PLUS Delivery • ALCOLOR dampening with VARIO • Technotrans Central Refrigeration CombiStar with Alcosmart • Ink Temperature Control • ALL Automatic washers (blanket, rollers and impression cylinders) • Air Transfer System • Steel Plate in feeder and delivery • Chromed cylinders • PowderStar WEKO AP 500 (Powder Spray) • AirStar PRO (Air Supply Cabinet) • ScrollStar Pneumatic compressor with compressed air dryer • StaticStar Compact Antistatic device in feeder & delivery • FilterStar Compact • CleanStar Compact Machine in excellent condition, available immediately

Condition: like new (used), Supply voltage: 24 V DC Application: Detection technology Height: 155 mm Width: 140 mm Depth: 135 mm Lodozca Urepfx Aiqshl Weight: 2780 g Condition: Like new

Condition: used, Year of construction: 2003, operating hours: 67,400 h, functionality: fully functional, machine/vehicle number: 112258, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 410 mm, controller model: Brother CNC-A00, total length: 2,250 mm, overall weight: 2,250 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 26, BROTHER TC-22A – 5 AXIS - Manufacturer: Brother - Model: TC-22A - Serial Number: 112258 - Year: 2003 - Machine Type: CNC Vertical Machining / Tapping Center - CNC Control: Brother CNC-A00 - Number of Axes: 5 - X-Axis Travel: 500 mm - Y-Axis Travel: 400 mm Lhjdpjzvf Najfx Aiqjl - Z-Axis Travel: 410 mm - Table Size: 650 × 400 mm - Maximum Table Load: 200 kg - Distance Table to Spindle Nose: 200–610 mm - Spindle Taper: HSK-A40 - Spindle: 1 - Spindle Speed: up to 12,000 rpm standard - Tool Magazine: 26 tools - Maximum Tool Diameter: 55 mm - Maximum Tool Diameter with Adjacent Pockets Empty: 125 mm - Maximum Tool Length: 200 mm - Tool Change Time: approx. 0.7 sec - Rapid Traverse X/Y/Z: 56,000 mm/min - Spindle Motor: approx. 7.7 kW / 10 min rating - Power Supply: AC 200 V, 50/60 Hz - Maximum Power Requirement: 25 kVA - Rotary / Swivel Table: Installed - 5-Axis Configuration: 3 linear axes + 2 rotary/swivel axes - Chip Conveyor: Included - Coolant Treatment System: Included - Coolant / Lubricant Pump: Included - Machine Dimensions / Required Floor Space: approx. 1,671 × 2,846 mm - Machine Height: approx. 2,274 mm - Machine Weight: approx. 2,250 kg - Accessories: Storage rack and tiered cart

Condition: like new (used), Year of construction: 2025, operating hours: 2,025 h, functionality: fully functional, machine/vehicle number: 25-168-T-402; 25-068-F-100-P, overall weight: 200 kg, Equipment: documentation/manual, A Soco System packaging line is offered, consisting of an F-100-P bottom flap folding machine and a T-402-5-2-9 carton sealing machine. Minimum carton width: 320 mm, maximum carton width: 520 mm, maximum carton length: 900 mm, machine dimensions X/Y: approx. 750 mm/1150 mm. Soco T-402 5-8-7 carton sealing machine, carton length range: 200 mm-750 mm, carton width range: 120 mm-460 mm, carton height range: 95 mm-470 mm, sealing capacity: 18/min, maximum tape roll diameter: 385 mm, weight: approx. 200 kg. Includes safety guard and powered conveyor belt, 500 mm wide. The system is in new condition, was put into operation in January 2026, and has only operated for approximately 75 days in a single-shift operation. Documentation is available. An on-site inspection is possible. Lhodezvp Uyopfx Aiqol

Condition: good (used), Year of construction: 2018, operating hours: 11,000 h, functionality: fully functional, PELLE SUR CHENILLE HITACHI ZX 350 LC ANNEE 2018 Ledpfx Aiozxw H Ajqshl 11000 H LARGEUR 3 M20 GRAISSAGE LIGNE BRH ATTACHE RAPIDE HYDRAULIQUE

Condition: used, Year of construction: 2020, Due to the large number of unserious emails, not all emails will be answered. WhatsApp RX 70-35 Diesel Hybrid, year of manufacture 2020, ready to drive Lsdpfsz Edv Iex Aiqshl RX 70-35 Gas, year of manufacture 2020, ready to drive RX 70-35 Gas, year of manufacture 2020, for spare parts RX 70-45 Gas, year of manufacture 2020, for spare parts RX 70-70 Diesel-Hybrid, year of manufacture 2018, for spare parts "ERRORS, TYPOS, AND PRIOR SALE EXCLUDED"

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 4480, total length: 14,500 mm, total width: 7,800 mm, total height: 3,500 mm, overall weight: 20,000 kg, Reichenbacher Machining Center VISION III-TT-L – 5-Axis, 3-Axis, MBG8, 5x SNA Equipment: 5-Axis Unit with Cardanically Mounted Spindle: Max. speed: 24,000 rpm Nominal speed: 10,000 rpm Power in S1*: 15 kW Max. power in S6: 20 kW Torque in S1*: 14.5 Nm Torque in S6: 19 Nm Nominal voltage: 380 V Nominal current: 37 A Nominal frequency: 380 Hz Speed freely programmable from 0 – 24,000 rpm, in 1 rpm increments Clockwise/counterclockwise rotation selectable via program Driven by frequency inverter Maintenance-free Water-cooled Hybrid bearings Automatic spindle stop in case of emergency stop Orientated stop for thread cutting Tool holder: HSK-F63 hollow shaft taper according to DIN 69893-6 Max. tool length usable from spindle nose: 240 mm Max. tool weight: 6 kg 3-Axis Unit with Vertically Mounted Spindle: Max. speed: 24,000 rpm Nominal speed: 10,000 rpm Power in S1*: 15 kW Max. power in S6: 20 kW Torque in S1*: 14.5 Nm Torque in S6: 19 Nm Nominal voltage: 380 V Nominal current: 37 A Nominal frequency: 380 Hz Speed freely programmable from 0 – 24,000 rpm, in 1 rpm increments Clockwise/counterclockwise rotation selectable via program Driven by frequency inverter Lhodpfxoywzq Se Aiqjl Maintenance-free Water-cooled Hybrid bearings Automatic spindle stop in case of emergency stop Orientated stop for thread cutting Tool holder: HSK-F63 hollow shaft taper according to DIN 69893-6 Max. tool length usable from spindle nose: 240 mm Max. tool weight: 6 kg 8-Spindle Drilling Unit (1 unit): L-Shape, Grotefeld Drill spindles: individually selectable Rotation direction: clockwise/counterclockwise Pitch: 32 mm Power: 2.5 kW Speed: 5,000 rpm fixed Z-axis stroke: +75 mm Holder: D = 10 mm H7 Plunge stroke: 80 mm Grooving Unit (5 units): GROTEFELD Angle Saw Unit F100-S The working/milling stroke is pneumatic. Drive: three-phase motor with multi-ribbed belt LEFT version Drive rotation direction: clockwise/counterclockwise Speed reduction: 1:2.86 – belt drive Power: 2.20 kW – 220-240/380-415 V – 50 Hz Speed: n1 = 2,800 rpm, n2 = 8,011 rpm at 50 Hz Spindle power: 2.2 kW Feed: 150 mm Tool holder: Ø30 x 1.5 mm – 5.0 mm Tool holder rotation: opposite to drive rotation direction Feed force: 2565 N Underfloor Drilling Unit in Machine Bed (1 unit): GROTEFELD Angle Milling Head G06-1.1-P The working/drilling stroke is pneumatic. Drive motor: 1.1 kW 220-240/380-415 V 50-100 Hz Drive rotation direction: clockwise Speed reduction: 1:1.55 gear drive Drive speed: 2,800 – 5,600 rpm Tool spindle speed: 4,340 – 8,680 rpm Tool holder: 1x HI-Q/ERM25 DIN6499-C (8°) For ER25 collet DIN 6499-B Ø0.5–16 mm max. Tool holder rotation direction: clockwise Flange clamping piece: FK45 Feed slide: with pneumatic cylinder and double steel guideways Feed: 80 mm

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: DC55-031, feed length X-axis: 1,000 mm, feed length Y-axis: 800 mm, feed length Z-axis: 800 mm, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, mount diameter: 175 mm, position of the milling head: 150 Achse Y, type of input current: three-phase, rotational speed (max.): 6,000 rpm, overall weight: 15,000 kg, table load: 1,000 kg, input voltage: 400 V, space requirement width: 4,000 mm, space requirement length: 6,000 mm, space requirement height: 3,000 mm, year of last overhaul: 2025, workpiece weight (max.): 1,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, The machines are equipped with spindle speeds of 0-6000 rpm and SK 50 spindles. The first gear stage, 0-1000 rpm, can be switched to a lower gear ratio, providing very high drive power even in the low speed range, suitable for heavy machining. The pallet changer handles 2 pallets; a total of 8 pallets are available and compatible with both machines. The tool changer has 40 positions. Additional equipment: Internal cooling system Chip conveyor Paper band filter system Separate oil cooler Various tool holders 1x Double angle plate 800 x 800 mm, manufacturer Kelch 3x Double angle plate 800 x 600 mm, manufacturer Kelch 4x NC vise Almatic Type NC 200 with 2 base plates (can be assembled as a clamping tower) Ljdpfxez D Tp Uo Aiqjhl Optionally, a second machine of the same type is available. Disassembly of the machine is possible after costs have been covered, with self-disassembly preferred.