Used Line Of Double Side Sizing/Edge Banding for sale (51,466)

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, workpiece height (max.): 90 mm, workpiece width (max.): 3,200 mm, workpiece length (max.): 3,200 mm, edge thickness (max.): 3 mm, The machine has the following configuration: Number of panel sizing/milling units on the left side: 5 Milling unit (AS10) Double finishing cutter, top and bottom 2 pre-milling units Milling unit Number of edge processing units: 10 End trimming Top and bottom trimming (rough) Fine trimming for chamfering and rounding Corner rounding (AR34, 4 motors) Edge milling (FB40, 1 motor) Edge scraping Belt sanding (1 motor) Glue scraping Polishing (2 motors) Spray device TECHNICAL DETAILS Minimum panel height: 10 mm Maximum panel height: 90 mm Maximum panel length: 3,200 mm Maximum panel width: 3,200 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm FEATURES Feed chain with carriers Pressure applied via rubber belt Panel guide rails with NC positioning Edge roll magazine with 6 positions Hot melt adhesive system for PUR adhesive NORDSON Roller set for edge pressing Iodpfx Asyq Avhsn Hsif 4 pressure rollers with NC positioning Spray device mounted on upper cabinets The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7685

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece height (max.): 60 mm, roll diameter: 830 mm, The dismantling is scheduled for calendar week 35. Until then, the buyer can inspect the system while it is in operation in Lithuania. Fully automatic edge banding line with the following machines: HOMAG PROFI KAL330/9/A3/WZ (year of manufacture 2013) HOMAG PROFI KAL370/8/A3/WZ (year of manufacture 2016) HOMAG PROFI TBL100/20/30/F infeed table (year of manufacture 2013) HOMAG POWER TWL410/25/LQ transfer system cross conveyor (year of manufacture 2016) TECHNICAL DETAILS Edge banding machines HOMAG PROFI KAL330/9/A3/WZ & PROFI KAL370/8/A3/WZ Workpiece width without edge, with workpiece thickness of 12–22 mm: min. 60 mm (depending on workpiece length) Workpiece width without edge, with workpiece thickness of 23–60 mm: min. 100 mm (depending on workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12–60 mm Edge height: max. workpiece thickness + 4 mm Edge material on roll: 0.3–3 mm Edge material height PVC: max. 135 mm Edge material height veneer: max. 100 mm Roll diameter: max. 830 mm HOMAG PROFI TBL100/20/30/F infeed table Roller diameter: 54 mm Roller spacing: approx. 60 mm Panel length: 240–2,500 mm Panel width: 120–3,000 mm HOMAG POWER TWL410/25/LQ transfer system cross conveyor Roller diameter: 64 mm Roller spacing: 110 mm Panel length: 240–2,500 mm Panel width: min. 240 mm Panel thickness: 8–60 mm Panel weight: max. 80 kg EQUIPMENT Isdsztazfspfx An Hsif Gap-free joining-cutting unit on both edge banding machines A3 basic gluing unit on both edge banding machines Gap-free processing units on both edge banding machines FA11 finishing unit on the HOMAG PROFI KAL330 FA21 finishing unit on the HOMAG PROFI KAL370 Fixed stop on the left side of the infeed table Transport rollers on the infeed table Lateral conveyor belt on the infeed table Electropneumatically controlled transverse safety device on the infeed table Manually adjustable infeed safety device Set for small parts Integrated air cushion table Fixed stop on the left side at the infeed and outfeed of the transfer system cross conveyor Infeed roller track with conveyor belt and cross conveying Controlled cross conveyor at the infeed Outfeed roller track Controlled cross conveyor at the outfeed Electropneumatically controlled stop protection device Lateral transport belt Manually adjustable panel overhang

Condition: used, Year of construction: 2010, - Application of release agent, top/bottom - Joint milling unit - Gluing unit - Trimming unit - Copy milling unit SKF-L - Profile trimming blade unit - Spray cleaning agent - Self-adjusting trimming blade unit - Buffing unit Single-sided edge banding machine Manufacturer: IMA Type: Advantage 310 Year of construction: 2010 Technical data Workpiece - Workpiece length: min. 150 mm - Workpiece width: min. 65* / 150 mm *at a max. workpiece thickness of 25 mm - Workpiece thickness: min. 8 mm, 12 mm with profile trimming blades max. 40 mm (with MFA 08.346), 60 mm (with SKF) - Smallest workpiece: 65 x 300 / 150 x 150 x 19 mm - Machining allowance per workpiece edge: 0 - 5 mm (observe max. chip cross-section) - Workpiece shape: right-angled - Material: chipboard, MDF - Surface material: direct coating (melamine resin paper), paper, film, veneer Edge material - Roll material without film: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm - max. edge cross-section: 150 - 180 mm² - Cut edge strips: Strips: 3.0 - 8.0 mm - max. strip cross-section: 520 mm² - Edge height: min. 12 mm, max. 65 mm - max. upper edge overhang: 2 mm Ijdozuyp Espfx An Hsif - Edge profiles Paper edge: approx. 0.4 mm, chamfer 15 Plastic edge up to 3.0 mm, radius depending on the tool Strip up to 8 mm flush milling (with interchangeable motor on MFA) Machine - Constant workpiece projection from the chain track: 35 mm + edge thickness - max. trimming cross-section 520 mm² - Throughput width: min. 65 mm (with projection of 35 mm) - min. workpiece length in feed direction: 150 mm - Overall height (top edge of chain track): 940 mm - Unit side: on the left in feed direction - Pneumatic connection: approx. 7 - 8 bar Application of release agent, top/bottom Joint milling unit 08.379 and blowing nozzle - with 2 motors, each 4 kW, 9000 RPM, 150 Hz Gluing unit 283.1513 with oil bath gearbox - Adhesive output 0.8 l, 60 mm high, with quick-lock system - can be used for hot melt adhesive or PU adhesive - with single roll / strip magazine, roll diameter 800 mm - with 3 main pressure rollers and 3 counter pressure rollers Trimming unit 08.415 - pneumatically swiveling to 0 or 8 degrees - with 2 motors 660 kW, 400 V, 200 Hz, 12000 RPM - 2 HM trimming saw blades 160 x 3.5 x 22, Z=36 Copy milling unit SKF-L - with 2 motors 180 W, 400 V, 200 Hz, 12000 RPM - and 2 motors 400 W, 400 V, 200 Hz, 12000 RPM - 1 set of DP profile milling cutter I 80x12xHSK25-R, Z = 4, with HSK25 shank - Profile length in the feed direction: max. approx. 50 mm - Workpiece thickness: max. 60 mm - Working speed: max. approx. 20 m/min - Distance between 2 workpieces: min. approx. 400 mm - min. workpiece projection = 35 mm + profile depth Profile trimming blade unit 08.519 - For finishing a top and bottom milled quarter-circle profile Spray cleaning agent Self-adjusting trimming blade unit 08.521 - for removing hot melt adhesive residue from the edge area of the top and bottom of the workpiece Buffing unit 08.617-2 - with an upper and lower motor: 180 W, 50 Hz, 1400 RPM - 2 polishing pads 50 x 160 x 19 mm

Condition: used, Year of construction: 2005, - Automatic infeed table - KFA unit - Return system Used single-sided edge banding machine Manufacturer: IMA Type: Combima Systems / I/R751220/R3 1 single-sided combination machine for trimming, edge gluing and edge finishing of panel-shaped workpieces made of wood and/or wood-based materials. - Automatic infeed table - KFA unit - Return system Technical data "Workpiece": Workpiece length - min.: 238 mm - max.: 2350 mm Workpiece width - min.: 142 mm - max.: 800 mm Workpiece thickness: - min.: 8 - 40 mm Technical data "Strip" (only for longitudinal processing): Roll material: - Paper edge bands & plastic edge bands: 0.3 - 3.0 mm - Veneer edge bands: 0.5 - 3.0 mm Edge height: - min.: 14 mm - max.: 45 mm Technical data "Machine": Variable workpiece overhang from the chain conveyor (including edge with edge thickness 0.3-3 mm): - min.: 40 mm - max.: 80 mm - PC control ICOS open - Feed speed v=5-25 m/min, frequency-controlled drive - Inclined roller table as infeed section NC infeed system for front and carcass parts - for length and width-independent automatic workpiece feed in single-sided edge processing machines. Only for the production of strip material in the 2nd pass - An additional stop rail, adjustable via NC axis. Double milling unit 08.376: - Controllable - Motor 1 operating in the same direction and motor 2 operating in the opposite direction - Reserve space on the unit carrier for a double trimming unit with electrical pre-installation for 2 x 6.6 kW. - Heater 300 lg, 2x1.5 kW, for preheating the workpiece edge. - Gluing unit 04.1570 system for straight edges and adhesive application to the workpiece. The edge thickness depends on the magazine used and is max. 3 mm. - Adhesive application for workpiece thickness max. 50 mm - 2 pre-melting tanks for PU adhesive Iijdpfxezuyplj An Hjf - 12-position edge magazine for roll material 0.3-3 mm thick. (8 slots up to 3 mm, 4 slots up to 1.3 mm) Vertical roll holder for 12 rolls: - max. roll diameter 850 mm - max. edge height 45 mm - Trimming unit 08.42, for 2 motors mounted on the upper pressure bar - Pre-milling and milling unit with height sensor - with 1 motor 1000 W - Multi-profile / chamfer unit, with 2 motors 1000 W - Contour milling unit KFA 30 - Multi-profile drawing blade unit - Flat drawing blade 08.517 - Copy edging unit 08.604 - Edging unit 08.617-2 - Double milling stand 75.184, 1050 mm high, both stand sides can be used - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 6000 rpm - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 600 rpm - Motor spindle for the use of the Hydro-Format tool system - Return system, manufacturer Meinert Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2003, Single-sided edge trimming and gluing machine Manufacturer: IMA Type: AVM/K/I/G80/822/S3R3L20 Year of manufacture: 2003 For milling, edge gluing, and finishing for a standard groove - only for pre-shaped/pre-grooved doors and square-edged doors Left-hand machine (fixed stop on the left). Complete processing in 3 passes 1st pass: Processing of the top surface of the door (transverse processing) 2nd pass: Door long edge 3rd pass: Door long edge During the 2nd and 3rd passes, the protruding transverse edge from the 1st pass is milled off by using a co-rotating/counter-rotating milling process. Double groove gluing is only possible through modifications to the machine and subsequent manual finishing of the edge. Max. door thickness: - Straight edge: approx. 70 mm - Groove gluing: approx. 60 mm Stable machine frame as a support for aggregates and housing for electrical installation. Drive for feed speeds of approx. 5-25 m/min., mechanically infinitely adjustable. (not to be confused with processing speed) Continuous, plastic-coated strip-type conveyor chain, approx. 80 mm wide, with automatic central lubrication. Manually height-adjustable top pressure with a V-belt 80 mm wide and spring-loaded, ball-bearing guide rollers. Machine length approx. 10,900 mm Infeed table at the machine inlet. 1 horizontal, manually adjustable, unheated stop bar 1 joiner milling unit controllable, not swiveling, without sensing with 2 motors, each 3 kW Gluing unit for optional operation of straight edge or softforming gluing, by changing the glue application. Edge material: - Strips: up to 1.3 mm - Roll material: 0.4-3 mm - Solid wood strips: 6 mm Strip length max.: 2550 mm Strip height: 14-80 mm (depending on glue application) with: - Side adjustment by hand for the pneumatically controlled glue application. - Height adjustment by hand -15mm downwards and up to +10mm upwards. 1 bell for the main pressure roller, manually adjustable 1 glue application 0.8L, max. edge height 70mm, straight edge with pneumatic quick-release, Chem-Coat coated, electronic temperature control 1 hot melt glue application 0.8L with quick-release, up to max. 80 mm high edge material, soft edge, Chem-Coat coated, with temperature control and control unit for the strip coating Isdpfx Aezuykven Hoif 1 automatic Quickmelt hot melt glue feeder with a heating power of 5.0 kW 1 2-fold magazine only for edge material up to 3.0 mm thick, can be manually attached to the single-roll magazine 1 groove forming pressing unit for pressing the edge material into the groove with: - an activation unit 15 kW for re-activating the edge material for groove forming - a pneumatically controlled forming shoe for the underlapping edge - a pneumatically controlled forming shoe for the entire groove - additional post-pressing rollers for the edge areas in the groove - an electro-pneumatic lateral retraction device for the entire pressing unit 1 horizontal adjustment with mechanical digital display 1 trimming unit for 2 motors mounted on the top pressure for trimming the front and rear edge/strip overhang, for trimming cuts flush or with a bevel. 1 milling unit for 2 motors with height sensing, side sensing, for pre-milling from below and above with 2 motors 1kW, 400V, 200Hz, 12,000 RPM, 30° swiveling 1 milling unit for 2 motors with height sensing, side sensing, for fine milling from below and above with 2 motors 660W, 400V, 200Hz, 12,000 RPM, 30° swiveling Note: The technical data and descriptions are copies of the original order

Condition: used, Year of construction: 2012, Softforming edge banding machine with panel cutting device Manufacturer: Elwood Year of manufacture: 2012 Technical data: - Adhesive application system with slotted nozzle - Compatible with EVA and PUR adhesives - Meler adhesive melting and application system - Electronically controlled adhesive temperature and melting time - Panel thickness: 10-60 mm - 2 profiling milling units - IR heating lamps for material preheating - Spray device for release agent - Pressing zone with heated tower pads (can be replaced with pressing rollers) - Edge band magazine - Front and rear trimming units - Top and bottom flush trimming units for longitudinal edge overhang (2 at the top + 2 at the bottom) - Top and bottom polishing units Iiedpfx Aszuyi Sen Hef - Computer control for quick, easy and precise adjustment of the machine's main functions and units Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2000, Edge banding machine, single-sided Manufacturer: OTT Type: Pacific V 6-F Year of manufacture: 2000 Technical data: Edge thickness: 0.2 - 6 mm Workpiece thickness: 8 - 42 mm Workpiece width: min. 70 mm Workpiece length: min. 0 mm Feed speed: 12 m/min Electrical connection: 3 x 400 V, 50 Hz Extraction: 2 x 120 mm at 20 m/s Extraction capacity: m³/h Equipment, processing units: Edge trimming 2 x 1.5 kW, 12,000 rpm, 200 Hz two tool-controlled spindles Gluing unit Rapid heating tank with Melt-matic automatic edge magazine with optical monitoring for strip edges in fixed lengths Release agent spraying device Cutting unit 2 x 0.2 kW, 12,000 rpm, 200 Hz automatic pivoting 0 / 3 Flush trimming unit x 0.43 kW, 12,000 rpm, 200 Hz Radius trimming unit R2 - R5 2 x 0.3 kW, 12,000 rpm, 200 Hz 2 quick-change stations for trimming units Corner rounding trimming unit 2 x 0.3 kW, 12,000 rpm, 200 Hz Scraper blade 2 x carbide scrapers Smoothing unit 2 x 0.2 kW, 2,800 rpm, 50 Hz Iisdpfozuyh Uex An Hjf Weight: 2,000 kg Note: The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2005, Single-sided edge banding machine Manufacturer: IMA Type: Novimat Systems/I/R75/1000 Year of manufacture: 2005 Technical data PC control - ICOS OPEN control system Feed rate 5-25 m/min, frequency-controlled Fence with electronic positioning control Adhesive application above and below Trimming unit with 2 motors, each 4.5 kW, 9,000 rpm, controllable. - Horizontally adjustable via axis Heating element approx. 300 mm long, 2x 1.5 kW Gluing unit - Adhesive application with pneumatic quick-lock system. - Automatic PU melting system Quickmelt for 2 kg cartridges - 32-position edge magazine (8 slots up to 3 mm / 24 slots up to 1.3 mm) Vertical roller holder for 32 rollers, max. diameter 850 mm Cutting unit on the upper pressure roller with 2 motors, each 200 W, 400 V, 12000 rpm. - Horizontal pneumatic swiveling 0-25 - With controllable side contact, for 3 edge thicknesses Trimming unit with 2 motors, each 1000 W, 400 V, 200 Hz, 12000 rpm. - Operating in counter-rotation. Iisdpfx Anszuyhnj Hjf Multi-processing unit 08.348 - For chamfering or radius trimming of the upper and lower longitudinal edges, as well as for copying the front and rear workpiece edges. - Program-controlled adjustment for up to 4 profiles - 2 motors, each 660 W, 400 V, 200 Hz, 12000 rpm. Spray nozzles above and below for applying cleaning agents Multi-profile scraper unit - With stepper motor axes for horizontal and vertical positioning. - For 4 profiles. Straight scraper unit - With electro-pneumatic retraction device Copying edge smoothing unit - With 4 smoothing motors, each 250 W - Smoothing unit with 2 lower and 2 upper motors, each 180 W, 50 Hz, 1400 rpm. Smoothing unit - For smoothing and eliminating the white haze on the trimmed PVC/ABS edges - With an upper and lower smoothing zone With workpiece return system LGIMATECH ZHR 05/L/145 - Air cushion table, inclined, 2 return belts with brushing devices from below. Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2010, - Equipped with ISAS 28-position edge magazine - PU gluing unit - With Boomerang return system Single-sided edge banding machine Manufacturer: Homag Type: KAL 310/7/A3 Year of manufacture: 2010 Technical data - Equipped with ISAS 28-position edge magazine - PU gluing unit - With Boomerang return system Edge trimming unit with 2 motors, each 3KW, 150 Hz, 9,000 RPM. Pneumatically controlled for pre-trimming PU gluing unit 34 with PU hot melt unit - capacity max. 6 kg/h Container size 2 kg. QA glue application unit Selectable edges from the ISAS 28-position edge magazine 4 pressure rollers Release agent spray unit, top and bottom Trimming unit WK 13, bevel / straight With 2 motors, each 0.4 KW, 200 Hz, 12,000 RPM. Electropneumatic adjustment of the trimming motors to 2 positions (flush trimming and with overhang) Pre-trimming unit with 2 motors, each 0.55 KW, 200 Hz, 12,000 RPM. With double-roller scanning. With electropneumatic adjustment Shaping trimming unit FK 11 - manual For processing the edge overhangs on the top and bottom edges of the workpiece, as well as for milling the front and rear edges With 2 motors, each 0.4 KW, 200 Hz, 12,000 RPM. Universal trimming unit UF 11 With motor 4 KW, 150 Hz, 9,000 RPM. Swiveling 90°, electropneumatically controlled With HSK 63 F collet for unlocking by push-button Profile scraping unit PN 10 Pneumatic adjustment for moving sideways out of the working area Finishing unit FA11 top/bottom Consisting of: Glue joint scraping blade Cleaning agent application Buffing unit with 2 motors, height adjustment with the upper pressure Machine control via 19-inch touchscreen Return system BOOMERANG ZHR05 With air cushion table, angled, length 2,000 mm, width 1,000 mm Conveyor belt width 1,100 mm Workpiece parameters: Length 300 - 2,500 mm / Width: 60 - 1,100 mm or Length 300 - 800 mm / Width: 1,100 - 2,000 mm Thickness 8 - 60 mm For 4-sided processing: Min. part size: 300 x 300 mm / max. part size 2,000 x 800 mm With roller strip for supporting wider parts. Iedpfezuyhhex An Heif

Year of construction: 2007, condition: ready for operation (used), This HOMAG WEEKE industrial production line was manufactured in 2007. It features a comprehensive setup for high-volume panel processing and edge-banding, including automatic loading systems, a central roller conveyor, multiple edge-banding modules, and a portal manipulator for stacking. Ideal for streamlined wood production, ensuring efficient handling and precision. Consider the opportunity to buy this HOMAG WEEKE industrial production line. Contact us for more information about this machine. • Core processing machines: • HOMAG Optimat KFL 525 • Units: pre-milling, gluing, trimming, radius units, scrapers, polishing • HOMAG control with touchscreen/keyboard • Sensors for board thickness and edge material detection • Large blue safety windows • HOMAG Optimat KFL 526 Isdpfx Aozuhbijn Heif • Continuing trimming and polishing stations • Manual service access with lift-up covers • Controls & electrics: • HOMAG electrical cabinet with main switch • PLC, fuses, control boards, voltage/current meters • Safety control panels (stop, reset, feed, emergency stop) • Condition: • Complete, physically connected line • Normal operational wear; no major damage visible • Full set of professional edge-banding aggregates installed Additional equipment • 2× Automatic loading systems: WEEKE OPTIMAT BST 500 D (2007) • Ser. no. 0–251–04–2756 (34 kW, 80 A) and 0–251–04–2755 (25 kW, 63 A) • Overhead gantry with vacuum lifting cups, automatic material alignment • Heavy-duty roller conveyor section • Transport/transfer system: HOMAG OPTIMAT TDL 310/25/12 (2007) • Ser. no. 0–205–10–1698 • Wide roller conveyor with safety guards • Cross-transfer and sorting sections • Integrated measuring and positioning units • Portal manipulator (stacker/unloader) • Overhead vacuum pick-and-place unit (orange) • Linear guiding with chain drive, dedicated motor drive • Automatic lifting and stacking of finished panels • Extraction/filtration • Strong industrial dust extraction along full line (yellow flexible hoses + metallic ducts) • Safety guarding • Complete set of safety guards across the line

Condition: excellent (used), Year of construction: 2011, For the complete technical description, please download the PDF document or request it directly. Used laser/PU edge banding machine for batch size 1 Manufacturer: Homag / Bargstedt Year of manufacture: 2011 Consisting of: Homag edge banding machine Power KFL610/21/PU/L/25/SI14 Isdpfx Ajzt N Egjn Heif - Infeed system SI14 - Outfeed conveyor TF 11 Bargstedt gantry system Profi TBP410/40/28/12/S Bargstedt belt conveyor TFB100/021/12 Bargstedt roller conveyor TFR560/S/_/28/31/12 Bargstedt timing belt conveyor TFZ531/40/25 Bargstedt belt conveyor TFB100/041/12 Bargstedt gantry system Profi TBP410/40/28/12/S Bargstedt timing belt conveyor TFZ531/40/25 Bargstedt belt conveyor TFB100/041/12 Bargstedt chain lift buffer TPK400/30/12 Bargstedt belt conveyor TFB100/041/12 Bargstedt belt conveyor TFB100/031/12

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, Equipment: documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) Iisdpfsztpw Njx An Hef - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging Iisdpfx Aoztl Scsn Hof - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 2700 Numerical Control PC Base Windows /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 (INVERTER C.N.) Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit AS 10 (Kw 5,8) pneumatic Iisdpfx Aju Rc Anjn Hsf N° 2 Hogging Units (1 Top + 1 Bottom) DT 10 (Kw 5,8 x 2) Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): 1° Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge Control EC 40) 2° Glueing Unit (Thermofusion with hot air) Air Force System Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-X (Kw 0,65 x 2) speed 28m/min. 0 - 25° Rough Trimming unit RS 10 (2 x Kw 2) Fine Trimming unit (Multi-profile, by N.C.) RF 40 (Kw 1 x 2) 0 - 25° Multi Function Unit (Profile contour Trimming unit) AR 80 (Kw 0, 65 x 2) max speed 25 m/min - ROTAX motors with automatic tool change (tools) Profile Scraping unit (Multi-profile, by N.C.) RB 40 (multiprofile) Glue scraping unit RC 20 + Spraying Unit (for polishing liquid) Buffing unit SZ 30 (Kw 0,37 x 2)

Condition: excellent (used), Double-side Sizing & Edge Banding - First Machine (1st in a line) Double side TWIN machine (1 Left Side single machine + 1 Right-side sigle machine) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 100 / 1200 Numerical Control PC base Windows /Software PC / SINTRA Adjustable feeding speed (m/min) 10 - 40 (INVERTER C.N.) SIZING PART (for each side): Spraying unit (Anti-sticking liquid) No. 2 Hogging Units (1 Top + 1 Bottom) DT 10 (Kw 5,8 x 2) Free space Iisdpou Rc Hyofx An Hef EDGE-BANDING PART (for each side): 1° Glueing Unit (Hot Melt Glue + Quick Melt system) SP 30 (High Melt + Edge Control EC 40) 2° Glueing Unit (Thermofusion with hot air) Air Force System Band Pressure zone (N.C. adjustment) Edge coils supporting unit (No. 6 reels) Rough Trimming unit RS 10 (2 x Kw 2) Fine Trimming unit (Multi-profile, by N.C.) RF 40 (2 x Kw 1) 0°-25° No. 1 Milling grooving unit EB 60 (1 x Kw 5) 0°-90°, ISO 30 motor Profile Scraping unit (Multi-profile, by N.C.) RB 40 Glue scraping unit RC 20 Spraying Unit (for polishing liquid) Buffing unit SZ 30 (2 x Kw 0,37)

Condition: excellent (used), LINE of Double-Side Sizing-Milling & Edge Banding (also "SOFTFORMING") with automatic handling. Max. panel thickness 100 mm. Composed by the following machines: W05025A) Automatic LOADER (portal / gantry) "MAHROS" Mod. Brush W05025B) Double-side Sizing and Edge Bander "HOMAG" Mod. KFL 620/23/QE/30 (softforming) SIZING PART (for each side): Pre-Milling unit (2 x Kw 6,6) Free place LEFT SIDE only: 2 x Milling grooving rotating unit (2 x KW 6,6) EDGE BANDING PART (for each side): Glueing Unit (EVA glue with pre-melter) Edge coils supporting unit (No. of reels) 1 pressure zone for both STRAIGHT and SOFTFORMING Snipping (end-cutting) Unit WK14 (2 x 0,8 KW) Fine Trimming Unit (2 x 0,55 KW) Corner-rounding unit FF12 (4 motors) WD70 Profile edge scraping unit PN20 Iijdpfx Anott Dqpo Hjf Finish processing unit (Glue scraper + Buffing unit) FA 11 W05025C) Automatic UNLOADER-STACKER (portal / gantry) "MAHROS" Mod. Brush

Year of construction: 2006, condition: used, edge thickness (max.): 12 mm, feed rate X-axis: 40 m/min, plate height: 60 mm, plate length: 2,400 mm, plate width: 1,000 mm, machine/vehicle number: 0-202-48-1184, No minimum price – guaranteed sale to the highest bidder! The machine must be collected between June 10, 2026, and June 30, 2026! The machine package consists of four machines, composed as follows: Pos. 1 - KUKA KR 180-2 PA Serial number: 940443 Function: Loading station Load capacity: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cups Pos. 2 - HOMAG KFL10/24/PU/30 Serial number: 0-202-48-1184 Machine type: Edge banding machine Adhesive system: PUR, laser Max. feed speed: 40 m/min Operating units: 12 Panel height min.: 8 mm Panel height max.: 60 mm Panel length max.: 2,400 mm Panel width min.: 85 mm Panel width max.: 1,000 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Number of panel formatting/milling units: 3 Iijdpfx Anjy Ur Hle Hof Pre-milling cutter Corner rounding unit Grooving unit Pressing system Panel support guides Positioning via NC Alignment system for panel infeed Panel formatting/milling units Unit 1: Pre-milling unit Automatically timed engagement Positioning via NC unit Unit 2: Double cutter, top and bottom Model: KD 10 Motor power: 6.6 kW Speed: 6,000 rpm Positioning via NC Unit 3: Pre-milling unit Motor power: 4 kW Speed: 8,640 rpm Automatically timed engagement Positioning via NC Gluing and edge system Number of positions in edge magazine: 24 Premelter model: ROBATECH PU-Premelter 18 Laser Lamps for preheating the panel side Edge processing units Number of edge processing units: 8 Edge processing unit 1: Trimming unit Number of motors: 2 Positioning via NC Edge processing unit 2: Rough milling, top and bottom Number of motors: 2 Edge processing unit 3: Fine milling for flush and radius milling Number of motors: 2 Positioning via NC Edge processing unit 4: Corner rounding Number of motors: 2 Automatic tool change Positioning via NC Edge processing unit 5: Milling/chipping unit Number of motors: 1 Motor power Unit 5: 12 kW Speed Unit 5: 10,000 rpm Automatic tool change Positioning via NC Edge processing unit 6: Edge smoothing blade Positioning via NC Edge processing unit 7: Glue application blade Edge processing unit 8: Buffing unit Number of motors: 2 Control and equipment Control system: POWER CONTROL PC 21 Barcode reader model: DATALOGIC Pos. 3 - KUKA KR 180-2 PA Serial number: 940444 Function: Unloading station Load capacity: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cup system Pos. 4 - LIGMATECH ZTR 100/30/26/S Serial number: 0-309-04-4129 Machine type: Panel return system for edge banding machine Panel width max.: 1,000 mm Panel length max.: 2,400 mm Control system: POWERCONTROL PC 52 Panel ejection Panel feed The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External reference: 8522

Condition: good (used), Brandt edgebander (Homag group) for roll and ABS edge banding. Complete with pre-milling units at entry and all profiling groups with corner rounding units. In perfect working condition. Iodpfey N Ukiox An Heif

Year of construction: 2007, condition: excellent (used), I sell the double end cutting and tenoning machine FRIULMAC IDRAMAT, Year 2007. Working width up to 2500mm Configuration left side / fix: 1 + 1 pcs. cutting saw aggregates / 3,0 + 3,0 KW 1 + 1 pcs. grooving saw aggregates front + back Iisdpfxsib A E Ao An Hjf Configuration right side / moving: 1 + 1 pcs. cutting saw aggregates / 3,0 + 3,0 KW 1 pc. special milling aggregate / 5,5 KW Material pressure feeding band from top Special construction, suitable also for sizing. Throughfeed machine. Siemens Simantic control panel. Very good condition. Available immediately.

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Iisdpfxefi Tkve An Hjf Edges thickness in strips/lippings max) mm 1,3 Panels thickness (min/max) mm 10 / 45 Working width (min/max) mm 244 / 2300 ca. Numerical Control /Software ICOS Open Adjustable feeding speed (m/min ) 8 - 40 Without Transmission bar (Master & Slave system) Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 270 SIZING PART (for each side): Pre-Milling unit 75.30 (Kw 6,6 x 2) EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt system) 04.1570 + 283.205 Edge coils supporting unit (reels N°) 6 Snipping (end-cutting) unit 08.42 (Kw 0,2 x 2) 40 m/min Fine Trimming unit 08.055 (Kw 0,66 x 2) 0°-30° Multi Function Unit (Profile contour Trimming unit) MFA 08.342 (Kw 0,66 x 2) max 25 m/min Corner Rounding unit (Contour Trimming) 08.465 (Kw 0,18 x 4) max 20 m/min Buffing unit 08.617-2 (Kw 0,18 x 2) Free space

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 3 Edges thickness in stips / lippings max mm 1,3 Panels thickness (min/max) mm 10 / 45 Ijdsfi Tkgepfx An Hoif Working width (min/max) mm 270 / mm 1300 Numerical Control /Software ICOS open Adjustable feeding speed (m/min ) 10 - 50 Without Transmission bar (Master & Slave system) Top pressure system with rubber belt SIZING PART (for each side): Pre-milling Unit (vertical joint trimmers) 75.30 (Kw 6,6 x 1) EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt system) 04.1569 + 283.205 Pressing roller (revolver) both for straight and shaped edges (softforming) mm 1.050 Edge coils supporting unit (reels N°) 6 Snipping (end-cutting) unit 08.42 (Kw 0,2 x 2) 40 m/min Rough Trimming unit 08.055 (Kw 0,66 x 2) 0°-30° Fine Trimming unit 08.0582 (Kw 0,66 x 2) 0°-30° Glue scraping unit 08.50 Buffing unit 08.617-2 (Kw 0,18 x 2)

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 2700 Numerical Control /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 (INVERTER C.N.) Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit AS 10 (Kw 5,8) N° 2 Hogging Units (1 Top + 1 Bottom) DT 10 (5,8 + 5,8) - Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge Guide Z-axe) Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-S (Kw 0,3 x 2) speed 28m/min. 0 - 25°. PNEU Fine Trimming unit (Multi-profile, by N.C.) RF 30 (Kw 0,65 x 2) 0 - 25° Multi Function Unit (Profile contour Trimming unit) AR 80 (Kw 0,3 x 2) max 25 m/min - ROTAX motors with automatic tool change (8+8 position store) Profile Scraping unit (Multi-profile, by N.C.) RB 30 Iiedpfx Aneu Tg Uqj Hef Glue scraping unit RC 20 + Spraying Unit (for polishing liquid) Buffing unit SZ 30 (Kw 0,37 x 2) With ‘hopper’ for panels (useful height mm 80), as a buffer, to speed up the work cycle

Condition: refurbished (used), SINGLE-SIDE SIZING & EDGE BANDING MACHINE (Left side machine) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 1 ALU Panels thickness (min/max) mm 6 - 55 Numerical Control /Software IMATRONIC 121 /01 Adjustable feeding speed (m/min ) 6 - 30 SIZING PART : Pre-milling Unit (vertical joint trimmers) adjustable by N.C. (2 x Kw 4,5) 08.376 Spraying unit (Anti-sticking liquid) EDGE-BANDING PART : Lamps to heat the workpieces side + Glueing Unit (P.U.R. Glue + Quick Melt unit) 04.1569 Band Pressure zone mm 1000 + Edge coils supporting unit (N. 6 reels) Iiodpjcr T N Djfx An Hef Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) working speed 25 m/min (swivelling 0-25°) Rough Trimming unit 08.0555 (2 x Kw 1) Fine Trimming unit 08.055 (2 x Kw 1) 30° + Spraying Unit (for sliding liquid) Multi-Profile Copying unit 08.348 (fine and contour trimming) adjustment by N.C (2 x Kw 0,66) Profile edge scraping unit (Multi-profile, adjustable by N.C.) 08.516 Glue scraping unit 08.517 (Pneumatic) Spraying Unit (for polishing liquid) Buffing unit 08.614 (2 x Kw 0,25) Milling grooving unit 08.183 (1 x Kw 3) Smoothing unit with spheres 08.53 Chamfer Sanding Unit for straight edges WI (4 x Kw 0,75)

Condition: excellent (used), 4-SIDED SIZING-SHAPING LINE (currently for Internal Doors). Composed by of the following machines: X10023A) Motorized infeed rollers table "CELASCHI"" Iodewzmbqopfx An Hoif X10023B) Double End Tenoner "CELASCHI" Mod. TSA 3 B 480 A Installed power KW 65 X10023C) 90° Motorized Transfer ("L-shape") conveyor "CELASCHI" Mod. X10023D) Double End Tenoner "CELASCHI"" Mod. TSA 2 B 360 Installed power KW 60

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Double-sided component painting line fully automatic Working width of the line 1300 mm The line consists of the following devices: - Vacuum feeder - automatic feeder before painting - GIARDINA Dualtech 416 automatic paint machine - 2 x 12m hot air drying tunnel - UV dryer - 3 lamps - material turntable Iodpfx Anetut Dxj Heif - automatic painting machine RICHFRUITS - 2 x 12m hot air drying tunnel - UV dryer - 3 lamps - Vacuum feeder Machine in working order, connected in very good condition.