Used Log Transporter for sale (19,751)

Condition: new, Description The VMR16-S-V Vogesenblitz log splitter offers an impressive splitting force of 16 tons and is equipped with a powerful 10 HP B&S Vanguard gasoline engine. It features a double pump, which enables efficient splitting performance. The log splitter is combined with a transport trailer that allows for speeds of up to 25 km/h and has a ball hitch. The detachable drawbar has a ground clearance of approximately 50 cm when in a horizontal position. For transport, the splitter can be quickly moved into a horizontal position, which simplifies handling. In addition, the log splitter offers a compact design with a retractable cylinder (quick release), which enables a transport height of only 1.90 m. The practical two-hand safety control provides increased safety during operation. Other features include two splitting speeds, a quick piston return, an ergonomically shaped splitting wedge, an interchangeable splitting blade, a brass guide, and a robust all-steel base plate. The splitter complies with the EN609-1 standard and is equipped with a mechanical log lift. Please note: A lighting system is not included but can be purchased as an accessory. TÜV approval is not possible. Equipment features: - 16 ton splitting force - With gasoline engine, B&S Vanguard 10 HP - With double pump - Combined with transport trailer for 25 km/h trailer use - Ball hitch - Detachable drawbar, hitch height approx. 50 cm above the ground in horizontal position - For transport, the splitter can be quickly moved into a horizontal position mechanically - Without lighting system (available as an accessory) - TÜV approval not possible! - Compact splitter with retractable cylinder (quick release) for transport height 1.90m - Practical 2-hand safety control Pedpfx Aie Adk Izs Tsrc - 2 splitting speeds - Quick piston return - Ergonomically shaped splitting wedge - Interchangeable splitting blade - Brass guide - All-steel base plate - Complies with EN609-1 incl. mechanical log lift

Condition: new, Description Podpfx Aj Adldkei Tjrc The VP12 Vogesenblitz log splitter offers a splitting force of 12 tons and is operated via a power take-off shaft with a 37-liter pump. It features a compact, lowerable cylinder for a transport height of 1.90 m and a three-point linkage of categories I and II. The easy-to-use two-hand safety switch, two splitting speeds, and the fast piston return increase ease of operation. The ergonomically shaped splitting wedge and the replaceable splitting knife with a length of 245 mm ensure flexible operation. Other features include construction compliant with EN 609-1, a mechanical log lifter, holders for an axe and hatchet, brass guides, and a robust all-steel base plate with a powder-coated surface. - 12 tons splitting force - Drive via power take-off shaft, 37-liter pump - Compact splitter with lowerable cylinder (quick release) for a transport height of 1.90 m - Three-point linkage Cat. I and II - Easy-to-use 2-hand safety switch - 2 splitting speeds - Fast piston return - Ergonomically shaped splitting wedge - Splitting knife length 245 mm - Replaceable splitting knife - Compliant with EN609-1, incl. mechanical log lifter - Holder for axe & hatchet - Brass guides - All-steel base plate - Powder-coated Hydraulic winch with remote control: - Pulling force approx. 600 kg - Cable speed up to 0.5 m/s - 20 m cable incl. cable hook with safety device - Cable Ø 6 mm - Weight 75 kg - Transmitter: with 3 AAA batteries; 1.5 Volt, 4 buttons (On / Off / In / Out), 64 different frequencies, weight 120 g - Receiver: 12 Volt DC from the tractor, incl. cable and 7-pin plug - In the event of a power failure, the valve can also be switched manually. (Overall height in transport position with winch ~213 cm) Speed 1 (cm/s): 11.4 Dimensions (H x L x W cm) (*Working position - Transport position): 250-190 x 120 x 110 Piston return (cm/s): 18.9 Pump: Single Pump capacity (L/min): 37 Opening width (cm): 108 Speed 2 (cm/s): 25.6 Drive: Power take-off drive Tank capacity (L): 28 Splitting force (tons): 12

Condition: new, Description The VMR17-S-V Vogesenblitz log splitter offers an impressive splitting force of 17 tons and is powered by a powerful 10 HP B&S Vanguard gasoline engine, which is equipped with a double pump. The log splitter is combined with a transport trolley that allows for speeds of up to 25 km/h and features a ball hitch as well as a detachable drawbar that is approximately 50 cm above the ground when the drawbar is horizontal. Other features include: - No lighting system (available as an accessory) - No TÜV inspection possible Prodo Adk Smjpfx Ai Tjc - Simple and easy-to-operate two-hand control - Two splitting speeds - Splitting length of 115 cm and cylinder stroke of 105 cm, can be lowered without tools - Mechanical log lifter with automatic locking (patent pending) - All-steel base plate with beveled edges - Piston quick return - Ergonomically shaped splitting wedge - 9-way adjustable log clamp with gas spring - Brass guide with lubrication - Holder for axe and hatchet This log splitter is therefore a robust and efficient solution for log splitting tasks. Container capacity (L): 28 Splitting speed, level 2 (cm/s): 20.7 Splitting pressure (tons): 17 Opening width (cm): 115 Tank capacity (L): 5.5 Splitting speed, level 1 (cm/s): 9.8 Pump capacity (L/min): 36.2 Pump: Double Piston return (cm/s): 14.1 Dimensions (H x L x W cm) (*Transport position - Working position): *190 x 120 x 214 / 250 x 120 x 218 Drive: Vanguard gasoline engine, 10 HP

Condition: new, Description The VP27 Vogesenblitz log splitter offers an impressive splitting force of 27 tons and is powered by the PTO shaft. With its robust cast iron pump, it operates particularly quietly. It complies with the safety standard EN 609-1 and is equipped with a simple two-hand control. The log splitter has two splitting speeds, a splitting length of 115 cm, and a tool-free adjustable cylinder stroke of 105 cm. The standard, patented mechanical log lifter with automatic locking provides additional safety. Other features include the all-steel base plate, the piston quick return, the ergonomically shaped splitting wedge, and the replaceable splitting blade with a length of 265 mm. The left control lever features a 9-position adjustable holding claw and a brass guide with grease nipples. The VP27 is designed for three-point hitches of categories I and II and has mounts for accessories such as an axe and a hatchet. The powder-coated surface ensures durability. - 27 tons splitting force - PTO shaft drive - Cast iron pump, robust and quiet - Complies with safety standard EN 609-1 - Simple and easy-to-use two-hand control - 2 splitting speeds - Splitting length 115 cm, cylinder stroke 105 cm, tool-free adjustable - Patented mechanical log lifter standard, with automatic locking - All-steel base plate with beveled edges - Piston quick return - Ergonomically shaped splitting wedge - Splitting blade length 265 mm - Replaceable splitting blade - Left control lever with 9-position adjustable holding claw and gas spring (for wood lengths from 77 cm and from Ø 8 cm) - Brass guide with grease nipples - Three-point hitch Cat. I and II - Mount for axe & hatchet - Powder coated Speed 1 (cm/s): 10.3 Drive: PTO shaft drive Pump: Single Piston return (cm/s): 15.3 Pjdpfe Adlitox Ai Tsrc Splitting force (tons): 27 Speed 2 (cm/s): 30.4 Pump capacity (L/min): 81 Tank capacity (L): 70 Opening width (cm): 115 Dimensions (H x L x W cm) (*Working position - Transport position): 264-202 x 155 x 150 cm

Condition: new, Description The VP13 Vogesenblitz wood splitter offers an impressive splitting force of 13 tons and is powered via the power take-off shaft. It meets the new safety standard EN 609-1 and features a simple two-hand control system as well as two splitting speeds. With a maximum splitting length of 115 cm and a cylinder stroke of 105 cm, which can be lowered without tools, it is particularly user-friendly. The standard, patented mechanical log lifter with automatic locking and the all-steel base plate with beveled edges ensure stability. Further advantages include the quick piston return, an ergonomically shaped splitting wedge and an interchangeable splitting blade length of 265 mm. The left-hand control lever offers a 9-position adjustable gripping claw, while the brass guide is equipped with grease nipples. With a three-point linkage of categories I and II, a wood holder with an adjustable claw, and a holder for an axe and hatchet, the VP13 Vogesenblitz is also powder-coated for additional protection and durability. - 13 tons splitting force - Power take-off drive - Complies with the new safety standard EN 609-1 - Simple and smooth two-hand control - 2 splitting speeds - Splitting length 115 cm, cylinder stroke 105 cm, can be lowered without tools - Patented mechanical log lifter standard, with automatic locking - All-steel base plate with beveled edges - Quick piston return - Ergonomically shaped splitting wedge - Splitting blade length 265 mm - Interchangeable splitting blade - Left-hand control lever with 9-position adjustable gripping claw and gas spring (wood length from 77 cm and diameter from 8 cm) - Brass guide with grease nipples - Three-point linkage Cat. I and II - Holder for axe & hatchet Predpfe Adlfbex Ai Tec - Powder-coated Hydraulic winch, mechanically controlled: - Pulling force 600 kg - Cable speed up to 0.5 m/s - 20 m cable with cable hook and safety device - Cable diameter 6 mm (Total height in transport position with winch ~213cm) Splitting force (tons): 13 Container capacity (L): 28 Opening width (cm): 115 Pump capacity (L/min): 45 Drive: Power take-off drive Dimensions (HxLxW cm) (*Working position - Transport position): 262-200* x135x120 Pump: Single Piston return (cm/s): 18 Speed 1 (cm/s): 10.6 Speed 2 (cm/s): 26

Condition: new, Description The VH16 Vogesenblitz log splitter offers a splitting force of 16 tons and is powered by tractor hydraulics. With a compact design and a lowerable cylinder, it achieves a transport height of only 1.90 m. It is suitable for three-point hitches of categories I and II and features an easy-to-use 2-hand safety switch, two splitting speeds, and a fast piston return. The ergonomically shaped splitting wedge, with a length of 245 mm, is replaceable, and the splitter complies with the EN609-1 safety standard. Additionally, it includes a holder for a hand axe and hatchet, brass guides, a full steel base plate, and a powder-coated surface. - 16 tons splitting force - Drive via tractor hydraulics - Compact splitter with lowerable cylinder (quick-release) for a transport height of 1.90 m - Three-point hitch cat. I and II - Easy-to-use 2-hand safety switch - 2 splitting speeds - Fast piston return - Ergonomically shaped splitting wedge - Splitting wedge length 245 mm - Replaceable splitting wedge - Complies with EN609-1 incl. mechanical log lifter - Holder for hand axe & hatchet - Brass guides - Full steel base plate - Powder-coated Hydraulic winch, mechanically controlled: - Pulling force up to approx. 600 kg - Rope speed up to 0.5 m/s - Limit switch at the rope inlet - 20 m rope with rope hook and safety - Rope Ø 6 mm Podpfxs Adkz Ij Ai Tjrc Splitting force (tons): 16 Piston return (cm/s): depends on the hydraulic output of the tractor Speed 2 (cm/s): depends on the hydraulic output of the tractor Dimensions (H x L x W cm) (*working position - transport position): 250-190 x 120 x 110 Container capacity (L): depends on the hydraulic output of the tractor Opening width (cm): 108 Pump output (L/min): depends on the hydraulic output of the tractor Drive: Tractor hydraulics Speed 1 (cm/s): depends on the hydraulic output of the tractor

Condition: new, Description The VP16 Vogesenblitz log splitter offers an impressive splitting force of 16 tons and is powered by a power take-off shaft (PTO). With its compact design and a lowerable cylinder, resulting in a transport height of only 1.90 m, it is extremely practical. It features a three-point linkage of categories I and II, as well as an easy-to-use 2-hand safety switch. Two splitting speeds and a fast piston return ensure efficient operation. The ergonomically designed splitting wedge with a splitting blade length of 245 mm is replaceable. The log splitter meets the EN609-1 standard and is equipped with a hydraulic log lifter. In addition, there are holders for a hatchet and axe, as well as brass guides and a robust, full steel base plate with a powder coating. - 16 tons splitting force - Drive via PTO - Compact splitter with lowerable cylinder (quick release) for a transport height of 1.90 m - Three-point linkage Cat. I and II - Easy-to-use 2-hand safety switch - 2 splitting speeds - Fast piston return - Ergonomically shaped splitting wedge - Splitting blade length 245 mm - Replaceable splitting blade - Complies with EN609-1, incl. hydraulic log lifter - Holder for hatchet & axe - Brass guides Predpfx Aio Adlfus Tsc - Full steel base plate - Powder coated Opening width (cm): 108 Splitting force (tons): 16 Container capacity (L): 28 Dimensions (H x L x W cm) (*working position - transport position): 250-190 x 120 x 110 Pump output (L/min): 54 Piston return speed (cm/s): 16 Pump: Single Speed 1 (cm/s): 10.6 Drive: PTO drive Speed 2 (cm/s): 27.8

Condition: new, Description The VPE22 Vogesenblitz log splitter offers a splitting force of 22 tons and combines a power take-off drive with a robust cast iron pump and an electric motor (400 V / 6.6 kW) with a double pump. It meets the safety standard EN 609-1 and features a simple two-hand operation and two splitting speeds. With a maximum splitting length of 115 cm and a cylinder stroke of 105 cm that can be lowered without tools, it offers flexible use. The patented mechanical log lifter with automatic locking and the ergonomic design of the splitting wedge increase user-friendliness. Other features include a quick piston return, an interchangeable splitting blade with a length of 265 mm, and left-hand operation with an adjustable clamping claw. The log splitter is suitable for three-point hitches of categories I and II and offers additional holders for an axe and a hatchet. The powder-coated surface ensures durability. - 22 tons splitting force - Combined drive via power take-off with cast iron pump and electric motor 400 V / 6.6 kW with double pump - Cast iron pump, robust and quiet - Complies with safety standard EN 609-1 - Simple and easy-to-use two-hand operation - 2 splitting speeds - Splitting length 115 cm, cylinder stroke 105 cm, can be lowered without tools - Patented mechanical log lifter as standard, with automatic locking - Full steel base plate with beveled edges - Quick piston return - Ergonomically shaped splitting wedge - Splitting blade length 265 mm - Interchangeable splitting blade - Left-hand operating lever with 9-way adjustable clamping claw and gas spring (for wood lengths from 77 cm and diameter from 8 cm) - Brass guide with grease nipples Prsdpe Adlbpsfx Ai Tec - Three-point hitch cat. I and II - Holder for axe & hatchet - Powder-coated Speed 1 (cm/s): 11.4 / 8.0 Dimensions (H x L x W cm) (*Working position - Transport position): 264-202* x 155 x 150 Pump: Single / Double Splitting force (tons): 22 Drive: Power take-off and electric motor 400 V Opening width (cm): 115 Speed 2 (cm/s): 23.3 / 24.8 Pump output (L/min): 69 / 58 Tank capacity (L): 62 Piston return (cm/s): 17.7 / 15.4

Condition: new, Description The VP22 Vogesenblitz log splitter offers a powerful splitting force of 22 tons and is driven by the PTO shaft. It features a robust, quiet cast iron pump and complies with the safety standard EN 609-1. The simple two-hand operation allows for user-friendly operation with two splitting speeds. With a splitting length of 115 cm and a tool-free adjustable cylinder stroke of 105 cm, it is very flexible. The standard, patented mechanical log lifter features an automatic locking mechanism. In addition, the log splitter offers a durable all-steel base plate, rapid piston retraction, and an ergonomically shaped splitting wedge. The left operating lever has a 9-position adjustable holding claw, and the brass guide is equipped with grease fittings. It is suitable for the three-point linkage of categories I and II and has holders for an axe and hatchet. The powder-coated surface provides additional protection and durability. - 22 tons splitting force - PTO shaft drive - Cast iron pump, robust and quiet - Complies with safety standard EN 609-1 - Simple and easy-to-use two-hand operation - 2 splitting speeds - Splitting length 115 cm, cylinder stroke 105 cm, tool-free adjustable - Patented mechanical log lifter standard, with automatic locking - All-steel base plate with beveled edges - Rapid piston retraction - Ergonomically shaped splitting wedge - Splitting wedge length 265 mm - Replaceable splitting wedge - Left operating lever with 9-position adjustable holding claw and gas spring (for logs from 77 cm in length and from Ø 8 cm) - Brass guide with grease fittings - Three-point linkage cat. I and II - Holder for axe & hatchet Prsdpo Adlh Aofx Ai Tec - Powder coated Hydraulic winch, mechanically controlled: - Pulling force up to approx. 600 kg - Cable speed up to 0.5 m/s - Limit switch at the cable inlet - 20 m cable with cable hook and safety - Cable Ø 6 mm (Overall height in transport position with winch ~213 cm) Ram retraction (cm/s): 17.1 Dimensions (H x L x W cm) (*Working position - Transport position): 264-202* x 155 x 150 Drive: PTO shaft drive Speed 1 (cm/s): 11.4 Opening width (cm): 115 Pump capacity (L/min): 69 Pump: Single Speed 2 (cm/s): 23.3 Tank capacity (L): 62 Splitting force (tons): 22

Condition: new, Description The VPE12 Vogesenblitz log splitter is a compact splitter with a splitting force of 12 tons, which can be operated either with an electric motor (400 V, 4.8 kW) or via a PTO drive. With a lowering cylinder design, it achieves a transport height of only 1.90 m and offers a three-point linkage of categories I and II. Safety features such as an easy-to-use two-hand safety switch and two splitting speeds ensure easy operation. The splitter features a quick piston return, an ergonomically shaped splitting wedge, and an interchangeable splitting knife length of 245 mm. Furthermore, it is designed according to EN609-1, includes a mechanical log lifter, and provides space for a handsaw and an axe. The robust design includes brass guides, a full steel base plate, and a powder-coated surface. - 12 tons splitting force - Combined drive via electric motor 400 V / 4.8 kW & PTO - Compact splitter with lowering cylinder (quick release) for a transport height of 1.90 m - Three-point linkage cat. I and II - Easy-to-use 2-hand safety switch - 2 splitting speeds - Quick piston return - Ergonomically shaped splitting wedge - Splitting knife length 245 mm - Interchangeable splitting knife - According to EN609-1 incl. mechanical log lifter - Holder for handsaw & axe - Brass guides - Full steel base plate - Powder coated Hydr. winch with remote control: - 20 m cable, Ø 6 mm with cable hook - Cable speed approx. 0 - 0.5 m/sec Pedpj Adk Ubofx Ai Tsrc - Pulling force up to approx. 600 kg - Transmitter: with 3 AAA batteries; 1.5 Volt, 4 buttons (On / Off / In / Out), 64 different frequencies, weight 120 g - Receiver: 12 Volt DC from the tractor; Incl. cable and plug - In case of a power failure, the valve can also be switched manually. (Overall height in transport position with winch ~213cm) Drive: PTO drive & electric motor 400 V Piston return (cm/s): 18.9 / 12.5 Speed 1 (cm/s): 11.4 / 7.7 Opening width (cm): 108 Dimensions (H x L x W cm) (*Working position - Transport position): 250-190* x 120 x 110 Pump: Single Speed 2 (cm/s): 25.6 / 16.7 Pump output (L/min): 37 / 21 Tank capacity (L): 28 Splitting force (tons): 12

Condition: new, Description The VP27 Vogesenblitz log splitter features an impressive splitting force of 27 tons and is powered by the power take-off shaft. It offers a robust and quiet cast iron pump as well as a simple two-hand control system in accordance with safety standard EN 609-1. With two splitting speeds, a maximum splitting length of 115 cm, and a tool-free adjustable cylinder stroke of 105 cm, it is particularly flexible. The log splitter includes a hydraulic log lifter, a full steel base plate with beveled edges, a piston quick return, and an ergonomically shaped and replaceable splitting wedge with a length of 265 mm. In addition, it is equipped with a 9-position adjustable retaining claw, brass guides with grease fittings, a three-point linkage of categories I and II, and holders for a froe and axe. The powder-coated surface ensures durability. - 27 tons of splitting force - Power take-off shaft drive - Cast iron pump, robust and quiet - Complies with safety standard EN 609-1 - Simple and easy-to-use two-hand control - 2 splitting speeds - Splitting length 115 cm, cylinder stroke 105 cm, tool-free adjustment - Incl. hydraulic log lifter - Full steel base plate with beveled edges - Piston quick return - Ergonomically shaped splitting wedge - Splitting wedge length 265 mm - Replaceable splitting wedge Pods Adli Tjpfx Ai Tjrc - Left-hand control lever with 9-position adjustable retaining claw and gas spring (for wood lengths from 77 cm and diameters from 8 cm) - Brass guide with grease fittings - Three-point linkage Cat. I and II - Holder for froe & axe - Powder-coated Speed 1 (cm/s): 10.3 Pump capacity (L/min): 81 Drive: Power take-off shaft drive Dimensions (H x L x W cm) (*working position - transport position): 264-202* x 155 x 150 cm Opening width (cm): 115 Piston return (cm/s): 15.3 Container capacity (L): 70 Speed 2 (cm/s): 30.4 Pump: Single Splitting force (tons): 27

Condition: new, Description The VHE17 Vogesenblitz log splitter achieves an impressive splitting force of 17 tons and features a combined drive system using tractor hydraulics as well as an electric motor with 400 V/4.8 kW and a double pump. It complies with the safety standard EN 609-1 and is equipped with a simple two-hand control. With two splitting speeds, a maximum splitting length of 115 cm, and a tool-free adjustable cylinder stroke of 105 cm, it is particularly user-friendly. It comes standard with a patented mechanical log lifter with automatic locking and offers a robust, all-steel base plate and a rapid piston retraction. It also features an ergonomically shaped splitting wedge, a replaceable splitting blade, and a 9-position adjustable log clamp. The log splitter has a three-point linkage of categories I and II, as well as holders for an axe and hatchet, and is powder-coated for high durability. - 17 tons splitting force - Combined drive via tractor hydraulics and electric motor 400 V / 4.8 kW and double pump - Complies with safety standard EN 609-1 - Simple and easy-to-use two-hand control - 2 splitting speeds - Splitting length 115 cm, cylinder stroke 105 cm, tool-free adjustable - Patented mechanical log lifter standard, with automatic locking - All-steel base plate with beveled edges - Rapid piston retraction - Ergonomically shaped splitting wedge - Splitting blade length 265 mm - Replaceable splitting blade - Left-hand control lever with 9-position adjustable log clamp and gas spring (for wood length from 77 cm and diameter from 8 cm) - Brass guide with grease nipples - Three-point linkage cat. I and II - Holder for axe and hatchet - Powder-coated Hydraulic winch, mechanically controlled: - Pulling force 600 kg - Cable speed up to 0.5 m/s - 20 m cable with cable hook and safety - Cable diameter 6 mm (Overall height in transport position with winch ~213 cm) Pump output (L/min): depending on the hydraulic performance of the tractor / 43 Speed 1 (cm/s): depending on the hydraulic performance of the tractor / 9.5 Opening width (cm): 115 Piston retraction (cm/s): depending on the hydraulic performance of the tractor / 14.2 Dimensions (H x L x W cm) (*Working position - Transport position): 262-200 x 135 x 120 Container capacity (L): 28 Speed 2 (cm/s): depending on the hydraulic performance of the tractor / 20.9 Drive: Tractor hydraulics and electric motor 400 V Splitting force (tons): 17 Pump: Double Psdpj Adkykefx Ai Torc

Condition: new, Description The VP16 Vogesenblitz is a powerful wood splitter with a splitting force of 16 tons, driven by a power take-off and a 45-liter pump. This compact splitter features a lowerable cylinder with a quick-release mechanism for a transport height of 1.90 m and is equipped with a three-point linkage of categories I and II. Safety is ensured by an easy-to-use 2-hand safety circuit. With two splitting speeds and a quick piston return, it offers efficient operation. The ergonomically designed splitting wedge with a splitting blade length of 245 mm is replaceable and provides additional safety according to EN609-1 thanks to the mechanical log lifter. Other features include a holder for an axe and hatchet, brass guides, a robust full-steel base plate, and a powder-coated surface. - 16 tons splitting force - Drive via power take-off, 45-liter pump - Compact splitter with lowerable cylinder (quick release) for a transport height of 1.90 m Prodpfo Adlgrjx Ai Tec - Three-point linkage cat. I and II - Easy-to-use 2-hand safety circuit - 2 splitting speeds - Quick piston return - Ergonomically shaped splitting wedge - Splitting blade length 245 mm - Replaceable splitting blade - According to EN609-1, including a mechanical log lifter - Holder for axe and hatchet - Brass guides - Full-steel base plate - Powder-coated Winch with remote control: - 20 m cable, Ø 6 mm - Cable speed approx. 0 - 0.5 m/sec - Pulling force up to approx. 600 kg - Transmitter: with 3 AAA batteries; 1.5 Volt, 4 buttons (On / Off / In / Out), 64 different frequencies, weight 120 g - Receiver: 12 Volt DC from the tractor; including cable and plug - In case of a power failure, the valve can also be switched manually. (Overall height in transport position with winch ~213cm) Speed 1 (cm/s): 10.6 Opening width (cm): 108 Speed 2 (cm/s): 27.8 Dimensions (H x L x W cm) (*Working position - Transport position): 250-190* x 120 x 110 Container capacity (L): 28 Pump capacity (L/min): 54 Pump: Single Piston return (cm/s): 16 Splitting force (tons): 16 Drive: Power take-off drive

Condition: new, Description The VMR16-S-H Vogesenblitz log splitter is a powerful and compact log splitter with the following features: - Engine: Equipped with a 9 HP Honda gasoline engine. - Hydraulics: Features a double pump for efficient operation. - Transport: Combined with a transport trolley suitable for speeds of up to 25 km/h on car trailers. - Coupling: Equipped with a ball-head coupling for easy trailer connection. - Positioning: The splitter can be quickly mechanically positioned horizontally to facilitate transport. - Lighting: No lighting system; however, it can be purchased as an accessory. - TÜV: No TÜV inspection possible. Additional features: - Compact splitter: With a retractable cylinder (quick-release) for a transport height of only 1.90 m. - Safety: Practical 2-hand safety switch for maximum safety during operation. - Splitting speeds: Available with 2 different splitting speeds. - Piston quick return: Enables rapid retraction of the piston. - Splitting wedge: Ergonomically shaped splitting wedge for efficient splitting. - Splitting blade: Replaceable splitting blade for easy maintenance. - Guide and construction: Brass guide and solid steel base plate for durability and stability. - Accessories: Includes a hydraulic log lifter for comfortable handling. Prodpe Adk I Iefx Ai Toc

Condition: new, Description The VPE17 Vogesenblitz log splitter combines an impressive splitting force of 17 tons with an innovative drive system via PTO with cast iron pump and electric motor (400 V/4.8 kW) with a dual pump. It meets the safety standard EN 609-1 and offers simple two-hand operation as well as two splitting speeds. The maximum splitting length is 115 cm, and the cylinder stroke of 105 cm can be lowered without tools. The log splitter is equipped with a hydraulic log lifter, a robust all-steel base plate, and an ergonomic splitting wedge. In addition, it has an interchangeable splitting blade with a length of 265 mm and a 9-position adjustable log clamp. The powder coating ensures durability, while the brass guide with grease nipples facilitates maintenance. It is compatible with three-point hitches of categories I and II and includes holders for an axe and a hatchet. - 17 tons splitting force - Combined drive via PTO with cast iron pump and electric motor 400 V / 4.8 kW with dual pump - Cast iron pump, robust and quiet - Complies with safety standard EN 609-1 - Simple and smooth two-hand operation - 2 splitting speeds - Splitting length 115 cm, cylinder stroke 105 cm, can be lowered without tools - Incl. hydraulic log lifter - All-steel base plate with beveled edges - Piston quick return - Ergonomically shaped splitting wedge - Splitting blade length 265 mm - Interchangeable splitting blade - Left-hand control lever with 9-position adjustable log clamp and gas spring (for wood lengths from 77 cm and diameter from 8 cm) - Brass guide with grease nipples - Three-point hitch cat. I and II - Holder for axe & hatchet - Powder coated Drive: PTO drive and electric motor 400 V Piston return (cm/s): 17.6 / 14.2 Speed 1 (cm/s): 11.8 / 9.5 Splitting force (tons): 17 Pump: Cast iron / Dual Opening width (cm): 115 Speed 2 (cm/s): 27.9 / 21.0 Dimensions (H x L x W cm) (*Working position - Transport position): 262-200 x 135 x 120 Prodpo Adlbiofx Ai Tsc Pump output (L/min): 57 / 43 Tank capacity (L): 28

Condition: new, Description The VHE16 Vogesenblitz wood splitter impresses with a splitting force of 16 tons and offers a combined drive via tractor hydraulics as well as an electric motor with 400 V/4.8 kW. The compact splitter with a quickly lowerable cylinder achieves a transport height of only 1.90 m and features a three-point linkage for Cat. I and II. Safety features such as an easy-to-use 2-hand safety circuit and two splitting speeds ensure user-friendly operation. In addition, the splitter offers a quick piston return, an ergonomically shaped splitting wedge, a splitting knife length of 245 mm with an interchangeable knife, and complies with the safety standards according to EN609-1. A holder for an axe and hatchet, brass guides, and a powder-coated full steel base plate complete the equipment. - 16 tons splitting force - Combined drive via tractor hydraulics and electric motor 400 V / 4.8 kW - Compact splitter with lowerable cylinder (quick release) for transport height 1.90 m - Three-point linkage Cat. I and II - Easy-to-use 2-hand safety circuit - 2 splitting speeds - Quick piston return - Ergonomically shaped splitting wedge - Splitting knife length 245 mm - Interchangeable splitting knife - According to EN609-1 incl. mechanical log lifter Prjdo Adkx Topfx Ai Tsc - Holder for axe & hatchet - Brass guides - Full steel base plate - Powder-coated Hydraulic winch, mechanically controlled: - Pulling force up to approx. 600 kg - Cable speed up to 0.5 m/s - Limit switch at the cable inlet - 20 m cable with cable hook and safety - Cable Ø 6 mm (Total height in transport position with winch ~213 cm) Container capacity (L): 28 Dimensions (H x L x W cm) (*Working position - Transport position): 250-190* x 120 x 110 Piston return (cm/s): depending on the hydraulic performance of the tractor / 14.2 Opening width (cm): 108 Speed 2 (cm/s): depending on the hydraulic performance of the tractor / 20.9 Speed 1 (cm/s): depending on the hydraulic performance of the tractor / 9.5 Pump capacity (L/min): depending on the hydraulic performance of the tractor / 42 Drive: Tractor hydraulics and electric motor 400 V Pump: Double Splitting force (tons): 16

Condition: new, Description The VHE22 Vogesenblitz log splitter offers a splitting force of 22 tons and combines drive systems via tractor hydraulics as well as an electric motor with 400 V/6.6 kW and a double pump. It complies with the safety standard EN 609-1 and features a simple two-hand control and two splitting speeds. With a maximum splitting length of 115 cm and a tool-free adjustable cylinder stroke of 105 cm, it can be used flexibly. The standard mechanical log lifter with automatic locking, the robust all-steel base plate, and the rapid piston return increase efficiency. Furthermore, it offers an ergonomically shaped splitting wedge, an interchangeable splitting blade with a length of 265 mm, a 9-position adjustable retaining claw, brass guides with grease nipples, and a three-point linkage for categories I and II. The log splitter is powder-coated and has holders for an axe and a hatchet. - 22 tons splitting force - Combined drive via tractor hydraulics and electric motor 400 V / 6.6 kW with double pump - Complies with safety standard EN 609-1 - Simple and easy-to-use two-hand control - 2 splitting speeds - Splitting length 115 cm, cylinder stroke 105 cm, adjustable without tools - Patented mechanical log lifter standard, with automatic locking - All-steel base plate with beveled edges - Rapid piston return - Ergonomically shaped splitting wedge - Splitting blade length 265 mm - Interchangeable splitting blade - Left-hand control lever with 9-position adjustable retaining claw and gas spring (for wood length from 77 cm and diameter from 8 cm) - Brass guide with grease nipples - Three-point linkage Cat. I and II - Holder for axe & hatchet - Powder-coated Splitting force (tons): 22 Drive: Tractor hydraulics and electric motor 400 V Container capacity (L): 62 Piston return (cm/s): depending on the hydraulic output of the tractor / 15.4 Pump: Double Predpj Adkywofx Ai Tjc Dimensions (H x L x W cm) (*working position - transport position): 264-202* x 155 x 150 Speed 2 (cm/s): depending on the hydraulic output of the tractor / 24.8 Pump output (L/min): depending on the hydraulic output of the tractor / 58 Speed 1 (cm/s): depending on the hydraulic output of the tractor / 8.0 Opening width (cm): 115

Condition: new, Description The VH22 Vogesenblitz log splitter offers a powerful splitting force of 22 tons and is operated via tractor hydraulics. It complies with the EN 609-1 safety standard and features a simple two-hand operation as well as two splitting speeds. With a splitting length of 115 cm and a cylinder stroke of 105 cm, it can be lowered without tools. It is equipped as standard with a patented mechanical log lifter and also features a full steel base plate, quick piston return, and an ergonomically shaped splitting wedge. The replaceable splitting blade has a length of 265 mm. Other features include a 9-position adjustable holding claw, a brass guide with grease nipples, three-point linkage of categories I and II, and holders for an ax and a hatchet. The powder-coated surface ensures durability. - 22 tons splitting force - Driven by tractor hydraulics - Complies with safety standard EN 609-1 - Simple and smooth two-hand operation - 2 splitting speeds - Splitting length 115 cm, cylinder stroke 105 cm, can be lowered without tools - Patented mechanical log lifter standard, with automatic locking - Full steel base plate with beveled edges - Quick piston return - Ergonomically shaped splitting wedge - Splitting blade length 265 mm - Replaceable splitting blade - Left-hand control lever with 9-position adjustable holding claw and gas spring (for wood lengths from 77 cm and diameter from 8 cm) - Brass guide with grease nipples - Three-point linkage cat. I and II - Holder for ax & hatchet - Powder coated Hydraulic winch, mechanically controlled: - Mechanical control via hand lever Prjdpfx Ae Adk Axji Toc - Driven by hydraulic motor - Pulling force approx. 600 kg - Cable speed up to 0.5 m/s - 20 m cable incl. cable hook with safety lock - Cable Ø 6 mm (Overall height in transport position with winch ~213 cm) Drive: Tractor hydraulics Container capacity (L): dependent on the tractor's hydraulic performance Pump output (L/min): dependent on the tractor's hydraulic performance Speed 1 (cm/s): dependent on the tractor's hydraulic performance Dimensions (H x L x W cm) (*Working position - Transport position): 264-202 x 155 x 150 Speed 2 (cm/s): dependent on the tractor's hydraulic performance Splitting force (tons): 22 Piston return (cm/s): dependent on the tractor's hydraulic performance Opening width (cm): 115

Condition: new, Description The VPE12 Vogesenblitz log splitter offers an impressive splitting force of 12 tons and is powered by a combined drive system via a power take-off shaft and a powerful electric motor (400 V / 4.8 kW). With its compact design and a lowering cylinder, it achieves a transport height of only 1.90 m. It features a three-point linkage of categories I and II, as well as an easy-to-use two-hand safety control. Two splitting speeds and a rapid piston return ensure efficient operation. The ergonomically designed splitting wedge with a splitting blade length of 245 mm is replaceable. The log splitter complies with the EN609-1 standard and is equipped with a mechanical log lifter. In addition, it offers a holder for axes and hatchets, brass guides, and a robust all-steel base plate, which is powder-coated. - 12 tons splitting force - Combined drive via power take-off shaft and electric motor 400 V / 4.8 kW - Compact splitter with a lowering cylinder (quick-release mechanism) for a transport height of 1.90 m - Three-point linkage Cat. I and II - Easy-to-use two-hand safety control Podj Adk T Rspfx Ai Torc - 2 splitting speeds - Rapid piston return - Ergonomically designed splitting wedge - Splitting blade length 245 mm - Replaceable splitting blade - Complies with EN609-1, including a mechanical log lifter - Holder for axes and hatchets - Brass guides - All-steel base plate - Powder-coated Hydraulic winch, mechanically controlled: - Pulling force 600 kg - Rope speed up to 0.5 m/s - 20 m rope with rope hook and safety device - Rope diameter 6 mm (Overall height in transport position with winch ~213 cm) Drive: Power take-off shaft and electric motor 400 V Speed 2 (cm/s): 25.6 / 16.7 Pump capacity (L/min): 37 / 21 Speed 1 (cm/s): 11.4 / 7.7 Piston return speed (cm/s): 18.9 / 12.5 Pump: Single Dimensions (H x L x W cm) (*Working position - Transport position): 250-190* x 120 x 110 Opening width (cm): 108 Container capacity (L): 28

Condition: new, Description The VPE13 Vogesenblitz log splitter offers an impressive splitting force of 13 tons and combines a PTO drive with a powerful electric motor (400 V / 6.6 kW). It meets the new safety standard EN 609-1 and is equipped with a user-friendly two-hand control and two splitting speeds. With a maximum splitting length of 115 cm and a cylinder stroke of 105 cm, it can be lowered without tools and features a patented mechanical log lifter with automatic locking. Furthermore, the log splitter includes a robust, all-steel base plate, a piston quick return, and an ergonomically shaped splitting wedge. The replaceable splitting knives have a length of 265 mm, and the left operating lever offers a 9-position adjustable clamping claw. In addition, a brass guide with grease nipples, a three-point linkage (Cat. I and II), and holders for an ax and hatchet are included. The entire splitter is powder-coated, which gives it additional durability. - 13 tons splitting force - Combined drive via PTO and electric motor 400 V / 6.6 kW - Complies with the new safety standard EN 609-1 - Simple and easy-to-use two-hand control - 2 splitting speeds - Splitting length 115 cm, cylinder stroke 105 cm, can be lowered without tools - Patented mechanical log lifter standard, with automatic locking Pjdpfx As Adk Uusi Tsrc - All-steel base plate with beveled edges - Piston quick return - Ergonomically shaped splitting wedge - Splitting knife length 265 mm - Replaceable splitting knife - Left operating lever with 9-position adjustable clamping claw and gas spring (for wood length from 77 cm and diameter from 8 cm) - Brass guide with grease nipples - Three-point linkage Cat. I and II - Holder for ax & hatchet - Powder-coated Hydraulic winch, mechanically controlled: - Pulling force 600 kg - Cable speed up to 0.5 m/s - 20 m cable with cable hook and safety - Cable diameter 6 mm (Overall height in transport position with winch ~213 cm) Pump performance (L/min): 45 / 28 Pump: Single Piston return (cm/s): 18 / 11.5 Tank capacity (L): 28 Splitting force (tons): 13 Speed 2 (cm/s): 26 / 20 Drive: PTO drive and electric motor 400 V Opening width (cm): 115 Speed 1 (cm/s): 10.6 / 7.4 Dimensions (H x L x W cm) (*Working position - Transport position): 262-200 x 135 x 120

Condition: new, Description The VMR17-S-H Vogesenblitz log splitter with a mechanical log lifter, conforming to EN 609-1, is a powerful machine powered by a 9 HP Honda gasoline engine. With an impressive splitting force of 17 tons, it is suitable for demanding log splitting tasks. The key features include: - Double pump for efficient splitting - Combined with a transport trailer for a maximum speed of 25 km/h as a car trailer - Ball head coupling and detachable drawbar for flexible handling - Two-hand operation, which is simple and easy to use - Two splitting speeds for different applications Psdpfx Aij Adk Ste Terc - Splitting length of 115 cm and cylinder stroke of 105 cm, lowerable without tools - Mechanical log lifter with automatic locking (patent pending) - Robust, all-steel base plate with beveled edges for stability - Piston quick return for fast work cycles - Ergonomically shaped splitting wedge - 9-way adjustable clamping claw with gas spring for secure log holding - Brass guide with lubrication for long-term use - Holder for axe and hatchet for added convenience Please note that the lighting system is not included in the scope of delivery but is available as an accessory. Furthermore, TÜV approval is not possible! Stamp return (cm/s): 14.1 Pump: Double Tank capacity (L): 28 Speed 1 (cm/s): 9.8 Splitting force (tons): 17 Drive: Honda gasoline engine 9 HP Pump capacity (L/min): 36.2 Dimensions (H x L x W cm) (*Transport position - Working position): *190 x 120 x 214 / 250 x 120 x 218 Opening width (cm): 115 Tank capacity (L): 5.5 Speed 2 (cm/s): 20.7

Condition: new, Description The VP22 Vogesenblitz log splitter offers an impressive splitting force of 22 tons and is powered by a PTO shaft. Equipped with a robust, quiet cast iron pump and designed according to the safety standard EN 609-1, it enables easy two-hand operation. With two splitting speeds and a maximum splitting length of 115 cm, as well as a tool-free adjustable cylinder stroke of 105 cm, it is extremely versatile. The log splitter includes a hydraulic log lifter and a stable, all-steel base plate. Other features include a quick piston return, an ergonomically shaped splitting wedge, and a replaceable splitting knife with a length of 265 mm. The left control lever features a 9-position adjustable retaining claw, while the three-point linkage of categories I and II ensures easy handling. A holder for an axe and hatchet, as well as the powder-coated surface, complete the high-quality equipment. - 22 tons splitting force - PTO shaft drive - Cast iron pump, robust and quiet - Complies with safety standard EN 609-1 - Easy and smooth two-hand operation - 2 splitting speeds - Splitting length 115 cm, cylinder stroke 105 cm, tool-free adjustable - Incl. hydraulic log lifter - All-steel base plate with beveled edges - Quick piston return - Ergonomically shaped splitting wedge - Splitting knife length 265 mm - Replaceable splitting knife - Left control lever with 9-position adjustable retaining claw and gas spring (for wood length from 77 cm and diameter from 8 cm) - Brass guide with grease nipples - Three-point linkage Cat. I and II - Holder for axe & hatchet - Powder-coated Container capacity (L): 62 Dimensions (HxLxW cm) (*working position - transport position): 264-202* x155 x150 Speed 1 (cm/s): 11.4 Drive: PTO shaft drive Pjdpfx Ae Adligji Torc Speed 2 (cm/s): 23.3 Piston return (cm/s): 17.1 Splitting force (tons): 22 Opening width (cm): 115 Pump: Single Pump capacity (L/min): 69

Condition: new, Description The VP13 Vogesenblitz log splitter offers an impressive splitting force of 13 tons and is powered by a PTO shaft. It complies with the safety standard EN 609-1 and features a simple two-hand operation as well as two splitting speeds. The maximum splitting length is 115 cm, while the cylinder stroke can be lowered without tools with a length of 105 cm. In addition, a patented mechanical log lifter with automatic locking is included as standard. The all-steel base plate ensures stability, and the ergonomically shaped splitting wedge and the replaceable splitting blade facilitate handling. Other features include a 9-position adjustable log clamp, a brass guide with grease nipples, and a three-point linkage of categories I and II. The log splitter is powder-coated and also includes holders for an axe and hatchet. - 13 tons splitting force - PTO shaft drive - Complies with the latest safety standard EN 609-1 - Simple and easy-to-use two-hand operation - 2 splitting speeds - Splitting length 115 cm, cylinder stroke 105 cm, can be lowered without tools - Patented mechanical log lifter included as standard, with automatic locking - All-steel base plate with beveled edges - Piston quick return - Ergonomically shaped splitting wedge - Splitting blade length 265 mm - Replaceable splitting blade - Left-hand control lever with 9-position adjustable log clamp and gas spring (for wood lengths from 77 cm and diameter from 8 cm) - Brass guide with grease nipples - Three-point linkage cat. I and II - Holder for axe & hatchet - Powder-coated Hydraulic winch with remote control: - Pulling force approx. 600 kg - Cable speed up to 0.5 m/s - 20 m cable incl. cable hook with safety - Cable diameter 6 mm - Weight 75 kg - Transmitter: with 3 AAA batteries; 1.5 Volt, 4 buttons (On / Off / Reel in / Reel out), 64 different frequencies, weight 120 g - Receiver: 12 Volt DC from the tractor, incl. cable and 7-pin plug Prodpfs Adlfhex Ai Tjc - In case of a power failure, the valve can also be switched manually. (Overall height in transport position with winch ~213 cm) Speed 1 (cm/s): 10.6 Dimensions (H x L x W cm) (*Working position - Transport position): 262-200* x 135 x 120 Pump: Single Splitting force (tons): 13 Tank capacity (L): 28 Piston return (cm/s): 18 Drive: PTO drive Speed 2 (cm/s): 26 Opening width (cm): 115 Pump capacity (L/min): 45

Condition: new, Description The VPE16 Vogesenblitz log splitter offers a splitting force of 16 tons and is powered by both a PTO shaft and a 400 V/4.8 kW electric motor with a double pump. With its compact design and lowerable cylinder, it achieves a transport height of only 1.90 m and is suitable for the three-point linkage of categories I and II. The easy-to-use 2-hand safety control and two splitting speeds ensure user-friendliness, while the piston quick return and the ergonomically shaped splitting wedge increase efficiency. The replaceable splitting blade (245 mm) and the robust construction elements such as the all-steel base plate and brass guides complete the overall package. The log splitter complies with the safety standards according to EN609-1 and features a holder for a splitting maul and axe. - 16 tons splitting force - Combined drive via PTO shaft and electric motor 400 V / 4.8 kW with double pump - Compact splitter with lowerable cylinder (quick release) for transport height of 1.90 m Prode Adlaxspfx Ai Tec - Three-point linkage cat. I and II - Easy-to-use 2-hand safety control - 2 splitting speeds - Piston quick return - Ergonomically shaped splitting wedge - Splitting blade length 245 mm - Replaceable splitting blade - Complies with EN609-1, incl. mechanical log lifter - Holder for splitting maul & axe - Brass guides - All-steel base plate - Powder-coated Hydraulic winch, mechanically controlled: - Pulling force up to approx. 600 kg - Cable speed up to 0.5 m/s - Limit switch at the cable inlet - 20 m cable with cable hook and safety - Cable diameter 6 mm (Overall height in transport position with winch ~213 cm) Container capacity (L): 28 Drive: PTO drive and electric motor 400 V Piston return (cm/s): 16 / 14.2 Speed 2 (cm/s): 27.8 / 20.9 Opening width (cm): 108 Splitting force (tons): 16 Pump capacity (L/min): 54 / 42 Pump: Single / Double Speed 1 (cm/s): 10.6 / 9.5 Dimensions (H x L x W cm) (*Working position - Transport position): 250-190 x 120 x 110

Condition: new, Description The VMR17-S Vogesenblitz log splitter is a powerful device with a splitting force of 17 tons, powered by a 10 HP Vanguard gasoline engine. Outstanding features include: - Drive via the gasoline engine with a double pump - Can be combined with a transport trailer, enabling a maximum speed of 25 km/h - Equipped with a ball hitch for easy transport - Quick mechanical adjustment to a horizontal position for transport - Detachable drawbar - Optional lighting system available (not integrated) - TÜV inspection not possible In addition, the log splitter offers: - A simple and easy-to-use two-hand control - Two splitting speeds - Splitting lengths of up to 115 cm with a cylinder stroke of 105 cm, which can be lowered without tools - A standard mechanical log lifter with automatic locking (patent pending) Prsdpfx As Adk Tdoi Tsc - A full steel base plate with beveled edges for additional stability - Piston quick return for increased efficiency - Ergonomically shaped splitting wedge - A 9-way adjustable holding claw with gas spring - Brass guide with lubrication - Holders for an axe and hand saw This log splitter combines functionality and ease of use and is ideal for various log splitting tasks. Pump: Double Piston return (cm/s): 14.1 Splitting pressure (tons): 17 Splitting speed, level 2 (cm/s): 20.7 Opening width (cm): 115 Drive: Vanguard gasoline engine, 10 HP Tank capacity (L): 28 l Dimensions (H x L x W cm) (*Transport position - Working position): *190 x 120 x 214 / 250 x 120 x 218 Pump output (l/min): 36.2 Splitting speed, level 1 (cm/s): 9.8 Oil tank capacity (L): 5.5