Used Mannesmann Demag Compressor for sale (3,898)

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 7814-0045, total length: 4,000 mm, total width: 1,500 mm, total height: 2,000 mm, Weight approximately 3000 kg For sale is a used machine from a site closure. Sale is made excluding any warranty for defects. Dwsdszqam Aepfx Akhsa The machine has not been inspected but was operational until the very end.

Year of construction: 1999, condition: ready for operation (used), Hydraulic injection moulding machine manufactured in 1999. This DEMAG Ergotech 150-610 Viva features a screw diameter of 45 mm and a maximum daylight between platens of 850 mm. It has a shot weight of 260 g and a maximum mold installation height of 250 mm. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Ergotech 150-610 Viva machine we have for sale. Contact us for further details. Dwodjyxrt Tepfx Akhea

Condition: excellent (used), Year of construction: 2003, Demag Ergotic system Dwjdpjr Avfnefx Akhsa Closing 35 tons Year of manufacture 2003

Condition: ready for operation (used), Year of construction: 2021, operating hours: 9,500 h, clamping force: 1,000 kN, overall weight: 5,290 kg, This 5-axis SUMITOMO SHI DEMAG IntElect2 100/470-250 was manufactured in 2021. It features a clamping force of 1000 kN and a tie bar distance of 470 mm. The machine includes an injection unit size of 250 and a screw diameter of 30 mm. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG IntElect2 100/470-250 electrical injection moulding machine we have for sale. Contact us for further details. Dodpszp Ew Dofx Akhswa - Tie Bar Distance: 470 mm- Mould Height Min.: 180 mm- Mould Height Max.: 550 mm- Centering Diameter (Fixed Platen): 125 mm- Centering Diameter (Moving Platen): 125 mm- Ejector Stroke: 150 mm- Ejector Force: 32 kN- Ejector Speed: 333 mm/s- Injection Unit Size: 250- Screw Diameter: 30 mm- L/D Ratio: 20- Injection Speed: 350 mm/s- Control Unit: SDIAS- Mains Connection / Voltage: 400 V / 50 Hz- Current / Amperage: 70 A- Short Circuit Capacity (Icw): 2.0 kA- Max. Hydraulic Pressure (Pmax): 210 bar- Total Weight: 5290 kg- Robot System Model: SDR 5S H&P- Robot Load Capacity: 3 kg- Robot X-Stroke (Transverse Stroke): 1000 mm (Non-operator side)- Robot Y-Stroke (Demoulding Stroke): 400 mm- Robot Z-Stroke (Vertical Stroke): 1000 mm- Additional / Peripheral Equipment:- Material Hopper Loader / Conveyor: KOCH TECHNIK- Temperature Control Unit: HB-THERM Thermo-5

Condition: used, total height: 1,200 mm, total length: 16,640 mm, total width: 3,510 mm, Colour: Yellow Empty weight: 3.000 kg Price: On request - Documentation available: No - CE certificate present: No - Serial number: 13/6 KF2 - Lifting capacity [kg]: 3000 - Span [mm]: 16600 - Girder: Single Djdpfx Akozn H N Sjhowa - Crane control: Fixed cable - Dismantled: Yes - Transport dimensions: 16640mm x 3515mm x 1200mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2010, Column jib crane, overhead crane, workstation crane -Manufacturer: Demag, Column jib crane type D-MS360, lifting capacity 3200 kg -Base plate: Ø 810 mm -Load capacity: 3200 kg -Chain hoist: Demag type 2M EKDR 3, year of manufacture 2010 -2x lifting speed: 6.0/1.0 m/min -Drive system: yes -Swivel drive: yes -Projection: 4480 mm -Total height: 5060 mm Dodpszpaq Eefx Akhewa -Hook height: 5040 mm -Swivel range: 360° -Transport dimensions: 1200/5500/H2260 mm -Empty weight: 1850 kg

Condition: used, Year of construction: 2019, Injection molding machine, Demag El Exis 1000/1195-6300, manufactured in 2019. Dwedpfxjzp D Sts Akhja

Condition: good (used), functionality: fully functional, Year of construction: 1990, PARIS area, August 2026 1 ADC 5T hoist, ADC, height 4360mm, span 15700mm, 5000kg 2 Europont 1T hoist, Verlinde, wired control, Verlinde, height 4360mm, span 15700mm, 1000kg 3 Europont 1T hoist, Verlinde VL10, Verlinde, height 4360mm, span 15700mm, 1000kg 4 DEMAG 1T, beam 10,800 mm, tracks 30m, Verlinde VX10 1008 B2 2022, span 10800mm, 1000kg 5 DEMAG 1T, beam 10,800 mm, tracks 30m, Verline VL10 1004 b2 2006, span 10800mm, 1000kg 6 DEMAG 1T, beam 10,800 mm, tracks 30m, Verlinde, height 3000mm, span 10800mm, 1000kg 7 DEMAG 1T, beam 10,800 mm, tracks 30m, Verlinde, height 3000mm, span 10800mm, 1000kg 8 Europont 1T hoist, Verlinde, wired control, Verlinde, height 3000mm, span 7800mm, 1000kg To be dismantled and removed in August, Paris. Price negotiable for the entire lot. Dwedpfx Akozndcpjhja Test video available for each bridge/crane. PRICE: 1000 EUR for one 1-ton bridge/crane.

Condition: excellent (used), Crane control, controller, safety control, safety switch, safety sensor, safety relay, control unit, overload trip power sensor, auxiliary switch block, auxiliary switch, contactor, solid-state contactor, contactor, power contactor, capacitor contactor, contactor, contactor, circuit breaker, motor contactor -Manufacturer: DEMAG, Schütz reversing Schütz, unused, original packaging -Type: DSW 3TF 8133 -Item No.: 87535044 Dedozmupwopfx Akhowa -Cardboard dimensions: 165/105/H75 mm -Weight: 0.5 kg

Condition: used, Single-girder bridge crane with hoist, DEMAG - KONECRANES, type CTX40410050P35FBL05 Crane bridge, manufacturer's number 281322/5, year of manufacture 2004 Load capacity: 5 tons Span, track gauge (center of wheel to center of wheel): 4650 mm Wheel diameter: approx. 140 mm Wheel flange width: 60 mm for track width 50 mm T-beam profile: height 320 x width 300 mm End beam length: 2425 mm (+ buffer pads, 60 mm each) Hoist, DEMAG - KONECRANES, type ZXT40410050P35FBL0F Hoist, manufacturer's number H0427815, year of manufacture 2004 Load capacity: 5 tons Rope arrangement: 4/1 Rope diameter: 8 mm Hook travel: 6 meters Dedpozd Urtjfx Akhjwa Main hoisting speed: 5.0 m/min Fine hoisting speed: 0.83 m/min Classification group: M5 Overall height from top of T-beam to bottom of crane hook: approx. 1100 mm Trolley travel speed: 0 to 20 m/min Crane travel speed: 0 to 30 m/min Power supply: 400 volts, 50 Hz - Control box suspended on cable, freely movable - Control cabinet on the crane bridge - Trolley travel with electric limit switches - Crane travel with electric limit switches Space required for transport (crane bridge only): L x W x H: 4830 x 2540 x 1200 mm Weight of crane bridge: approx. 1.6 tons The crane bridge is in very good condition, like new.

Condition: excellent (used), Crane control unit, controller, safety control unit, safety switch, safety sensor, control unit, overload release power sensor, gear limit switch, contact evaluator, frequency evaluator -Manufacturer: DEMAG, crane control contact evaluator, original packaging Dwedpfx Aszmrinekhoa -Type: Dematik MKA-2 -Item No.: 46953144 -Cardboard dimensions: 175/115/H60 mm -Weight: 0.4 kg

Condition: excellent (used), Crane control system, controller, safety control system, safety switch, safety sensor, safety relay, control unit, overload trip power sensor, gear limit switch, contact evaluator, frequency evaluator Dwsdpfx Akjzmribehsa -Manufacturer: DEMAG, crane control contact evaluator, original packaging -Type: Dematik MKA-2 -Item No.: 46967044 -Cardboard dimensions: 175/115/H60 mm -Weight: 0.3 kg

Condition: used, Column-slewing crane DEMAG, type KBK 1 Identification No. Boom: 98005044 Identification No. Crane column: 85102644 Year of manufacture: 2007 Load capacity: 80 kg Slewing range: 270° Dwodpfoznn H Sjx Akhsa Outreach: 5000 mm Overall height: 4030 mm Height to the underside of the boom: 3500 mm - Boom profile: DEMAG C-profile rail KBK 1 - Boom with adjustable slewing limit - Trolley for DEMAG C-profile rail KBK 1 - Base plate of crane column: L x W x H = 450 x 450 x 25 mm (4 holes, Ø approx. 27 mm) Self-weight: 300 kg Very good condition

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, load capacity: 1,000 kg, lifting height: 5,000 mm, Electric chain hoist Dsdev Uvn Iopfx Akhswa DEMAG DKUN10-1000 K V1 Load capacity 1000 kg, 2/1 Hook travel 5 m Year of manufacture 2006 Without control unit, otherwise complete Very good condition Various electric chain hoists in stock Good condition Info: 20,000 DEMAG spare parts and components in stock! Demag parts warehouse

Condition: excellent (used), Year of construction: 2008, Injection Moulding Machine DEMAG System 800/1120-9500 Basic Information Manufacturer: DEMAG Model: System 800/1120-9500 Year of manufacture: 2008 Clamping Unit Clamping force: 8,000 kN Platen dimensions (horizontal × vertical): 1620 × 1500 mm Tie bar spacing (horizontal × vertical): 1120 × 1000 mm Minimum mould height: 500 mm Maximum mould height: 1050 mm Maximum distance between platens: 2080 mm Opening stroke: 1030 mm Ejector stroke: 350 mm Ejector force: 139 kN Maximum mould weight: 7,200 kg Injection Unit Screw diameter: 130 mm Injection volume: 7,300 cm³ Shot weight (PS): 6,640 g Maximum injection pressure: 1,300 bar Screw length: 20 L/D Electrical & Hydraulic Equipment Rated pump motor power: 110 kW Heater power: 79 kW Hydraulic oil tank capacity: 1,300 l Machine Dimensions and Weight Machine dimensions (L × W × H): 12.3 × 2.7 × 2.7 m Machine weight: 33,500 kg Control cabinet weight: 9,700 kg Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with the modern ESS servo drive system, which increases the energy efficiency of hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor via a frequency inverter, adjusting the motor’s rotational speed to the current demand during the production cycle. As a result, electrical energy is consumed only during the actual machine demand. Key Advantages Dwedpfx Akjyugctehoa - Up to 30% reduction in electricity consumption - Servo drive technology for the hydraulic pump - World-class and proven technology used in the plastics processing industry - Reduction of energy losses during idle operation - Lower heating of the hydraulic system - Longer service life of hydraulic components - Possibility of installation on existing hydraulic injection moulding machines The ESS system enables a significant reduction in machine operating costs while maintaining full production parameters.

Condition: excellent (used), Year of construction: 2008, DEMAG Injection Moulding Machine System 1500/1500-16000 Basic Data Manufacturer: DEMAG Model: System 1500/1500-16000 Year of manufacture: 2008 Clamping Unit Clamping force: 15,000 kN Dimensions of mounting plates (H × V): 2150 × 1880 mm Clearance between tie bars (H × V): 1500 × 1250 mm Dwedpfx Ajyugalokhoa Minimum mould height: 700 mm Maximum mould height: 1400 mm Maximum opening stroke: 2900 mm Injection Unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Injection weight (PS): 9,880 g Maximum injection pressure: 1454 bar Electrical and Hydraulic Equipment Rated pump motor power: 165 kW Heater power: 97 kW Machine Dimensions and Weight Net machine weight: 74 t Control cabinet weight: 21 t Total weight: approx. 95 t Dimensions (L × W × H): 14.4 × 3.4 × 2.9 m Service History / Repairs 2010 – new screw with RSP and barrel 2015 – new IBED 2015 – new wiring board 2017 – new motor and pump no. 2 2017 – new injection cylinder rod BS with seals 2017 – replacement of oil cooler circulation pump 2017 – replacement of TeachBox (robot) 2018 – replacement of pumps P1 + P3 (at 65,800 h) 2018 – hydraulic oil change Optional ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which significantly improves energy efficiency in hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor through a frequency inverter, which adjusts the motor speed to the machine’s actual demand during the production cycle. As a result, electricity is consumed only when it is truly needed. Main Benefits - Up to 30% reduction in energy consumption - Servo drive technology for hydraulic pumps - Global quality and proven technology used in the plastics processing industry - Reduced energy loss during machine idle time - Lower heating of the hydraulic system - Extended service life for the motor and hydraulic components - Option for installation in existing hydraulic injection moulding machines The ESS system allows significant reduction of machine operating costs while maintaining full production performance parameters.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, DEMAG System 1500/1500-16000 Injection Moulding Machine Year of manufacture: 2008 We offer for sale a high-quality injection moulding machine from the German brand Demag, model System 1500/1500-16000, equipped with a robot and additional equipment. The machine is in very good technical condition, regularly serviced, complete, and ready for operation. TECHNICAL DATA Clamping unit: Clamping force: 15,000 kN Mounting platen dimensions (W x H): 2,150 x 1,880 mm Clearance between tie-bars (W x H): 1,500 x 1,250 mm Minimum / maximum mould height: 700 – 1,400 mm Maximum opening stroke: 2,900 mm Injection unit: Screw diameter: 145 mm Injection volume: 10,981 cm³ Shot weight (for PS): 9,880 g Injection pressure: 1,454 bar Electrical-hydraulic system: Hydraulic motor power: 165 kW Heater power: 97 kW Dwsdpfx Akeww Idljhja Dimensions and weight: Machine weight with control cabinet: 74,000 kg / 21,000 kg Overall dimensions (L x W x H): 14.4 m x 3.4 m x 2.9 m Additional equipment: Wittmann W 753 robot – year of manufacture: 2008 Safety enclosure Conveyor belt (product conveying) The machine is ideal for processing large technical mouldings. Perfect for serial production, with the possibility of full automation thanks to the installed robot and part removal system.

Condition: used, Column-slewing crane DEMAG Type KBK 1 Year of manufacture: approx. 1980 Load capacity: 250 kg Slewing range: 270° Outreach: 2000 mm Overall height: 2300 mm Height to the underside of the boom: 1800 mm Dwjdpfxevp Ryhe Akhoa - Boom profile: DEMAG C-profile rail KBK 1 - Trolley for DEMAG C-profile rail KBK 1 - Base plate for crane column: L x W x H = 370 x 370 x 20 mm (4 holes, approx. Ø 27 mm) Weight: 145 kg

Condition: used, Year of construction: 2009, Due to a relocation of our production facilities abroad, we now have two injection molding machines of the EL Exis / Sumitomo Demag brand available. These are the EL Exis S 200 - 840 and 300 - 1450 models, manufactured in 2009, which we would like to offer you on a non-binding basis. Dedsznwahopfx Akhjwa The machines have been operated in our facility on a two-shift system. Only clear, glass-like PP random copolymer was processed. In addition to the injection molding machines, the side-entry robots from Wittmann are also included in the scope of supply.

Condition: used, total height: 1,000 mm, total length: 11,500 mm, total width: 2,450 mm, - Documentation available: No - CE certificate present: No - Lifting capacity [kg]: 5000 - Lifting height [mm]: 5500 - Span [mm]: 11300 Dedpfx Akozmd T Ejhjwa - Girder: Single - Crane control: Fixed cable - Dismantled: Yes - Transport dimensions: 11500mm x 2450mm x 1000mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Control switch with crane hook, crane remote control, control head, crane control, crane control, pendant control, control switch, control cylinder, command switch for manipulator, lifting aid, lifting device, workstation crane, overhead jib crane, overhead crane, workstation crane, material grab, column jib crane Dsdpfx Akjzmf Abjhswa -Manufacturer: Demag, Demag Manulift control switch with crane hook -Control switch: Type DSM4 -Crane hook: Load capacity 250 kg -Transport dimensions: 360/170/H200 mm -Weight: 3.3 kg

Condition: good (used), Electric motor, three-phase motor for geared motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer: Demag, crane motor brake motor type KBV 71 A 2 -Power: 0.2 kW -Speed: 2550 rpm -Shaft: Ø 14 x 25 mm -Design: B14 -Dimensions: 275/138/H210 mm Dwedpszmfm Tofx Akhea -Weight 10.2 kg

Condition: good (used), Geared motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer: DEMAG, geared motor type 13/6 PKF 12/4 -Power: 0.05/0.17 kW Dedpfezmfc Ijx Akhswa -Speed: 450/1440 rpm -Shaft: Ø 14 mm -Protection rating: IP54 -Number: 2 geared motors available -Price: per piece -Dimensions: 270/210/H220 mm -Weight: 12.8 kg

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 1,180 mm, total length: 1,950 mm, total width: 600 mm, It can be sold with an invoice, but I am VAT-exempt, so it doesn't really make sense. Especially for such a bargain, less than 3000 euros for a device that cost almost 9000 euros new. Never used, so it's brand new. Dsdpfxezlvaho Akhjwa All the information about the device can be found in the photos.

Condition: excellent (used), Load measuring device, overload protection -Manufacturer: Demag, Load measuring device, overload protection, original packaging -Type: MGS 0.63/2.20 -Item No.: 49169244 -Individual components: see photos -Cardboard dimensions: 285/220/60 mm Dwjdpezlxb Ijfx Akhea -Weight: 1.1 kg