Used Mbo T500/4-4-Se500 for sale (58,289)

Condition: used, maximum load weight: 44,980 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, first registration: 09/2024, next inspection (TÜV): 09/2025, total width: 2,550 mm, Equipment: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment list. Full equipment details available on request. Chassis, cranked * Special steel frame made of high-strength fine-grained steels, electric welded at connection points, well-dimensioned outer frame * 4-axle configuration. Wheel covers above the axles with spray suppression * All steel parts sandblasted * Side underrun protection mounted, made of anodized aluminum * Increased point load capacity approx. 30,000 kg over approx. 4,000 mm * Special construction in the cranked area for the largest possible low-bed length in combination with AluLeg drop supports instead of telescopic spindle landing gears, max. rear swing radius of the tractor unit approx. 2,100 mm Special body with rear stanchion extension * Self-supporting aluminum roof girder/profile approx. 120 x 100 mm, sliding roof with plastic flaps * Rear stanchions expandable to approx. 4,200 mm * Three sliding stanchions per side with rubber tension relief * Additional central stanchion latches in the roof girder and parking position, operable by pull cable and spring latch * Mechanical lifting roof with height adjustment, lifting roof height approx. 400 mm, operable from both sides or one side only, without opening the opposite side and doors * Additionally, height adjustment of approx. 480 mm in approx. 40 mm increments via height-adjustable stanchions * Front cover on the bulkhead for driving under tarp up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on each side, 450 mm pockets at bottom, four rows of single pockets above * In the high-bed only 3 rows of insertable slats. Intermediate distances evenly distributed Floor * Approx. 27 mm special water-resistant bonded beech multiplex boards, rough surface * Steel plate in the wheel arch area * Forklift suitable according to DIN ? standard * Flush outer frame surface Brakes * WABCO air brake system with EBS according to EC standard 71/320 EEC incl. PREV (Park Release Safety Valve) * Spring brake cylinders as parking brake * Wabco Smart Board with odometer and axle load indicator Axles * 4 x 10,000 kg SAF/Sauer with drum brakes in low loader design * Air suspension with lift and lowering function, total stroke approx. 230 mm * Third and fourth axle as friction-steered trailing axles with electric and mechanical lock Twin tyres * 235/75 R 17.5, -16 ply, incl. spare wheel holder, without spare wheel Paintwork * Chassis in RAL 3002 red, single colour * Central stanchions, axles KTL-coated black * Corner stanchions hot-dip galvanized * Plastic parts black * Hot-dip galvanized parts unpainted * Rims in factory silver * Body single-colour in RAL shade Special equipment included * Air suspension in ECAS version, operation on the semi-trailer * Oversize signage front and rear, galvanized, stepless telescopic, with attached marker lights incl. sockets for revolving beacons (small plates) * Additional sliding roof frame release from outside * 4 stanchion adapters for special outer frame profile, for arbitrary locking of central stanchions * PVC sliding tarpaulins, color similar to RAL 9006 silver * Translucent roof tarpaulin, oversize and overheight specification, flat hooks, tarpaulin folds, closures with locking pawl/OCS Iasdpfx Aelthgusb Njt * Rear left telescopic socket for warning beacon incl. light * Outer frame for machine transport with approx. 64 lashing poin

Condition: new, maximum load weight: 45,250 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete inventory of vehicles available for immediate and short-term delivery on our website. Excerpt from the equipment list. Full specifications available upon request. Chassis, stepped: * Special steel frame made from high-strength fine-grained steels, electrically welded at connection points * Generously dimensioned outer frame. 4-axle configuration * Wheel covers over the axles with spray suppression * All steel parts sandblasted * Side underrun protection made of anodized aluminum mounted * Increased point load approx. 30,000 kg over approx. 4,000 mm * Special construction in the stepped area for the longest possible low-bed length in combination with AluLeg drop supports instead of telescopic support legs, maximum rear swing clearance of the tractor unit approx. 2,100 mm Special body with rear stake extension: * DINKEL – special body * Self-supporting aluminum roof beam / profile approx. 120 x 100 mm, sliding roof with plastic flaps * Rear stakes extendable for loading/unloading up to approx. 4,200 mm * Three sliding stakes per side with elastic relief * Additional intermediate stake lockings in roof beam and parked position, via pull cable and spring bolt * DINKEL – mechanical lift roof, height-adjustable * Lift roof height approx. 400 mm, operable from both sides or one side without opening the opposite side * Additional height adjustment of approx. 480 mm in approx. 40 mm increments by adjusting the stakes Iodjwx Dbiopfx Ab Noat * Front cover at bulkhead for driving operation under the tarpaulin up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on the side, 450 pockets below, four rows of single pockets above. Only three rows of slats in the raised platform, spacings evenly distributed Floor: * Approx. 27 mm special waterproof bonded beech phenolic plywood, rough surface * Steel sheet in the wheel well area. Suitable for forklift traffic as per DIN standard * Outer frame flush with deck surface Brakes: * WABCO air brake system with EBS according to EC Directive 71/320, including PREV (Parking-Release Safety Valve) * Spring-loaded brake cylinders as parking brake * WABCO Smart Board with mileage counter and axle load display * Including WABCO tire pressure monitoring system Axles: * 4 x 10,000 kg SAF with drum brakes in low-loader design * Air suspension with lift and lower device, total lift approx. 230 mm * Third and fourth axles as friction-steered trailing axles with electric and mechanical lock Twin tires: * 235/75 R 17.5, 16-ply. Make of our choice, including spare wheel holder * Without spare wheel Lighting: * According to EU regulations, including LED side marker lights * Position lamps in LED design * 2 additional reversing lights * 2 work lights on the inside front wall, upper section Paintwork: * Chassis and body in one color, RAL 3002 carmine red * Intermediate stakes, axles KTL-coated black * Corner stakes hot-dip galvanized * Plastic parts black * Galvanized parts unpainted * Rims in factory silver Special equipment included: * 15-pin electrical supply cable * Air suspension in ECAS design, operated on the trailer * Oversize signage front and rear in galvanized, infinitely telescopic design with installed marker lights, including sockets for rotating beacons (small signs) * Additional external release for sliding roof frame lock * 4 stake adapters for special outer frame profile, to lock intermediate stakes as needed * PVC sliding tarpaulin, color similar to RAL 9

Condition: good (used), The Pieralisi Decanter is a high capacity horizontal centrifuge designed for industrial applications requiring efficient solid-liquid separation. The decanter is used for the separation of two or more specific phases of different densities, especially for the clarification of liquids in which suspended solids are present. The separation of solids and liquids takes place inside a cylindrical-conical rotating drum, where the heavier solid phase is collected on the periphery and continuously removed by an internal conveyor. Its key technical specifications are detailed below: Technical specifications: - Drum diameter: 470 mm - Maximum drum speed: 3,350 rpm - Drum ratio: 5.28 l/d - Typical applications: wastewater treatment, sludge separation, processes in the food and chemical industry. Iedpfxjwxwz Ao Ab Neat

Year of construction: 2002, condition: ready for operation (used), functionality: fully functional, infeed width: 720 mm, Placing a bid obligates the buyer to collect the equipment on time, no later than 31/12/2025! The offer includes: - MBO R 700 Feeder (Serial no.: 0722420, Year: 2002) - H+H M7.35 Folding Unit (Serial no.: 1543, Year: 2002) - H+H M7.35 Folding Unit (Serial no.: 1544, Year: 2002) - H+H M7.35 Folding Unit (Serial no.: 1545, Year: 2002) - MBO SBAP-46-ME Vertical Delivery (Serial no.: 90020602, Year: 2002) - H+H 148/2 Transfer Unit (Serial no.: 820-411, Year: 2002) - Bickel SGU Die Cutter (Serial no.: 033, Year: 1997) Ijdpfjxyhnyjx Ab Neat - MBO 3-Up Delivery for SAP 66-ME (Serial no.: 910913362) - Polar L-1000-W-3 Pallet Lift Table (Serial no.: 6072421) TECHNICAL DETAILS Fold Plates Fold plates 1st folding unit: 6 (individually driven, removable sheet transfer) Fold plates 2nd folding unit: 6 Fold plates 3rd folding unit: 2 Infeed Width Infeed width 1st folding unit: 720 mm Infeed width 2nd folding unit: 720 mm Infeed width 3rd folding unit: 520 mm This machine comes with a gate fold plate (usable in units 1 and 2), as well as 2 separate sheet diverters and 1 auxiliary frame for setup. Units 2 and 3 are electrically height adjustable! Note: The MBO delivery unit is defective.

Condition: good (used), Year of construction: 1980, 4-jaw chuck Length: 1500 mm Width: 500 mm Height: 1500 mm Iasdpfx Aowry Ixsb Nst Weight: 900 kg

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 11,360 h, load capacity: 6,000 kg, lifting height: 4,000 mm, load center: 700 mm, fuel type: diesel, mast type: duplex, construction height: 2,910 mm, power: 62.5 kW (84.98 HP), motor manufacturer: Perkins 1104D-44T/62,5 KW, gearing type: hydrostat, fork length: 1,400 mm, front tire type: pneumatic tires (air-filled), front tire size: 315/70 R15, rear tire type: pneumatic tires (air-filled), rear tire size: 315/70 R15, total width: 2,200 mm, Equipment: lighting, Heating, soot filter, fully enclosed cab, joystick, windscreen wiper, fully enclosed cab with roller-bearing door, tinted windows, complete lighting system, two front headlights with protective glass, additional mast-mounted work lights as well as roof and rear lighting. Platform width: 1,400 mm, platform height: 1,030 mm, frame cut-out: 1,500 mm. The machine is ready to drive and operational. Iedpsy Nl U Eofx Ab Nsat

Condition: used, functionality: fully functional, Year of construction: 2008, load capacity: 5,000 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: simplex, construction height: 3,100 mm, drive type: Diesel, Side loader Mast type: Standard Condition: Ready for operation and fully functional Iaodpfx Aoy Nufgob Nst Technical condition: normal

Year of construction: 2023, condition: used, functionality: fully functional, Schwamborn Floor Stripper FBS 40 FBS 40 — Year of manufacture 2023 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product photos to follow — please contact us for current images Iedpfx Aoy A Havsb Nsat - On-site inspection in 37574 Einbeck available by appointment Price EUR 1,490 plus VAT | EXW Einbeck | Delivery upon request

Year of construction: 2023, condition: used, functionality: fully functional, Schwamborn Concrete Processing Machine DSM 450 2,2 kW 400 V/50 Hz DSM 450 2,2 kW — Year of manufacture 2023 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product photos to follow — please contact us for current images Iedoy A E S Rjpfx Ab Njat - On-site inspection in 37574 Einbeck available by appointment Price EUR 2,300 plus VAT | EXW Einbeck | Delivery upon request

Condition: new, For sale: High-quality steel compensating hose (Ringwellschlauch) made of stainless steel, designed for industrial applications. This component is used to compensate for vibrations, thermal expansions, and stresses in piping systems. Ideal for installations: - industrial - heating - gas - water - process/technological ⚙️ Technical data Type: SP20 Nominal diameter: DN100 Length: 1000 mm Pressure: PN10 Material: stainless steel 1.4404 (INOX) Standard: ISO 10380 / DIN 3384 Designation: BOA-MS (10/2022) Connections: pipe ends for welding Braid: reinforced stainless steel braid ✅ Advantages ✔ corrosion resistance ✔ high durability and flexibility ✔ vibration and noise damping ✔ compensation of thermal expansion ✔ industrial-grade product – robust construction Iaodpfxoyzimvs Ab Not

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 14,178 h, load capacity: 5,000 kg, lifting height: 4,260 mm, free lift: 2,000 mm, fuel type: diesel, mast type: duplex, construction height: 2,880 mm, fork carriage width: 1,260 mm, fork length: 1,350 mm, empty load weight: 7,390 kg, total length: 4,200 mm, drive type: Diesel, construction width: 2,150 mm, Sideload forklift Load center: 650 Fork width: 180 mm Fork thickness: 50 mm Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: normal Front tire type: Superelastic Iasdjyp Nykspfx Ab Not Front tire size: 27x10-12 Rear tire type: Superelastic Rear tire size: 27x10-12 Description: In addition to this Jumbo model, we have around 200 heavy-duty forklifts, compact forklifts, lift trucks, and sideloaders available in our Hamburg and Gdansk warehouses. Visit our homepage – sago-online. Leasing and financing on favorable terms are always available. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide you with detailed advice on this J/SNHP 50/13/42V. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom construction of forklifts from 8 tonnes and up. We can also display your vehicle for consignment sale at our facility. Fork positioner, Fork positioner opening range: 380 / 1245 mm Heater, full cab, full free lift, Platform height: 880 mm

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 11,645 h, load capacity: 5,000 kg, lifting height: 4,480 mm, free lift: 2,100 mm, fuel type: diesel, mast type: duplex, construction height: 3,030 mm, fork carriage width: 1,270 mm, fork length: 1,200 mm, empty load weight: 7,820 kg, total length: 4,340 mm, drive type: Diesel, construction width: 2,050 mm, Side loader Load center: 600 mm Fork width: 180 mm Fork thickness: 50 mm Mast type: Duplex Condition: Ready for use and fully functional Technical condition: very good Front tires type: Superelastic Front tires size: 27x10-12 Rear tires type: Superelastic Rear tires size: 27x10-12 Description: In addition to this Jumbo model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and side loaders in stock at our Hamburg and Gdansk warehouses. Visit our website – sago-online. Hire purchase and financing at attractive terms are always available. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this JDQN50/12/45V. P.S.: Our master workshop specializes in repairs, maintenance, overhauls, and custom modifications for forklifts from 8 tons and up. We are also pleased to offer your vehicle for commission sale in our facility. Fork positioner, Heater, fully enclosed cabin, full free lift, Platform height: 860 mm Iaedoxirqdjpfx Ab Not

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 9,220 h, load capacity: 4,000 kg, lifting height: 4,020 mm, fuel type: diesel, mast type: simplex, construction height: 2,700 mm, fork carriage width: 1,430 mm, fork length: 1,380 mm, empty load weight: 7,380 kg, total length: 4,540 mm, drive type: Diesel, construction width: 2,170 mm, Sideloader Load center of gravity: 700 Iodsvlp Dqopfx Ab Noat Fork width: 200 mm Fork thickness: 45 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Pneumatic Front tires size: 250/75-12 Rear tires type: Pneumatic Rear tires size: 250/75-12 Description: In addition to this Jumbo model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouse in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an over-the-counter basis, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this JDQN 40/14/40. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and over. We would be happy to display your vehicle for consignment sale. Heating, full cab, Platform height: 870 mm

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 11,010 h, load capacity: 6,000 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: simplex, construction height: 3,050 mm, fork carriage width: 1,460 mm, fork length: 1,400 mm, empty load weight: 9,690 kg, total length: 4,950 mm, drive type: Diesel, construction width: 2,230 mm, Sideloader Load center of gravity: 700 Fork width: 180 mm Fork thickness: 60 mm Iasdpfev U Ey Hjx Ab Nst Mast type: Standard Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 3.00-15 Rear tires type: Superelastic Rear tires size: 3.00-15 Description: In addition to this Jumbo model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an over-the-counter basis, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this JDQ 60/14/45. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and above. We would be happy to display your vehicle for consignment sale. Heating, full cab, Platform height: 1050 mm

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 10,444 h, load capacity: 7,000 kg, lifting height: 5,040 mm, free lift: 1,440 mm, fuel type: diesel, mast type: duplex, construction height: 3,370 mm, fork carriage width: 1,360 mm, fork length: 1,400 mm, empty load weight: 10,850 kg, total length: 5,100 mm, drive type: Diesel, construction width: 2,250 mm, Sideloader Load center of gravity: 700 Fork width: 200 mm Fork thickness: 70 mm Iodov U Er Nspfx Ab Noat Mast type: Duplex Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Pneumatic Front tires size: 355/65-15 Rear tires type: Pneumatic Rear tires size: 355/65-15 Description: In addition to this Jumbo model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouse in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this JDQ70/14/50V. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and above. We would be happy to display your vehicle for consignment sale. Heating, full cab, full free lift, Platform height: 1140 mm

Condition: used, functionality: fully functional, Year of construction: 2000, operating hours: 10,194 h, load capacity: 7,000 kg, lifting height: 4,000 mm, free lift: 325 mm, fuel type: diesel, mast type: simplex, construction height: 2,900 mm, fork carriage width: 1,450 mm, empty load weight: 9,840 kg, total length: 4,800 mm, drive type: Diesel, construction width: 2,200 mm, Sideloader Load center of gravity: 700 Mast type: Standard Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 3.00-15 Rear tires type: Superelastic Rear tires size: 3.00-15 Description: In addition to this Jumbo model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouse in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle, even without purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this J/SH70/14/40. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and above. We'd be happy to display your vehicle for consignment sale. Heating, full cab, Platform height: 1030 mm Iodpfx Abjwacbdj Neat

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 15,779 h, load capacity: 7,000 kg, lifting height: 5,040 mm, free lift: 1,440 mm, fuel type: diesel, mast type: duplex, construction height: 3,370 mm, fork carriage width: 1,360 mm, fork length: 1,400 mm, empty load weight: 10,850 kg, total length: 5,100 mm, drive type: Diesel, construction width: 2,250 mm, Sideloader Load center of gravity: 700 Fork width: 200 mm Fork thickness: 70 mm Mast type: Duplex Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 355/65-15 Rear tires type: Superelastic Rear tires size: 355/65-15 Description: In addition to this Jumbo model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouse in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an over-the-counter basis, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this JDQ70/14/50V. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and above. We would be happy to display your vehicle for consignment sale. Isdjv U Eyyjpfx Ab Njat Heating, full cab, full free lift, Platform height: 1,140 mm

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 9,183 h, load capacity: 6,000 kg, lifting height: 7,000 mm, free lift: 2,320 mm, fuel type: diesel, mast type: triplex, construction height: 3,320 mm, fork carriage width: 1,460 mm, fork length: 1,400 mm, empty load weight: 9,690 kg, total length: 5,100 mm, drive type: Diesel, construction width: 2,230 mm, opening width: 2,147,483,647 mm, Side loader Load centre of gravity: 700 Fork width: 180 mm Fork thickness: 60 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Front tires type: Superelastic Front tires size: 3.00-15 Rear tires type: Superelastic Iedpfx Abeu Dy Ris Noat Rear tires size: 3.00-15 Description: In addition to this Bulmor model, we have around 200 heavy-duty forklifts, compact forklifts, forklifts & side loaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always possible for us. We are also happy to buy your used vehicle freely, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this JDQ60/14/70T P.S.: Our forklift master workshop specializes in repairs, maintenance, overhauls and special construction for forklifts from 8 tons. We would also be happy to exhibit your vehicle for commission sale. Heating, full cabin, full free lift, Platform height: 960 mm

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 5,915 h, load capacity: 6,000 kg, lifting height: 4,020 mm, fuel type: diesel, mast type: simplex, construction height: 2,880 mm, fork carriage width: 1,460 mm, fork length: 1,400 mm, empty load weight: 9,690 kg, total length: 4,950 mm, drive type: Diesel, construction width: 2,230 mm, Side loader Load centre of gravity: 700 Fork width: 180 mm Fork thickness: 60 mm Isdpfx Aju Rgqisb Nsat Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tires type: pneumatic Front tires size: 3.00-15 Rear tires type: pneumatic Rear tires size: 3.00-15 Description: In addition to this Jumbo model, we have around 200 heavy-duty forklifts, compact forklifts, forklifts & side loaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always possible for us. We are also happy to buy your used vehicle freely, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this JDQ60/14/40 P.S.: Our forklift master workshop specializes in repairs, maintenance, overhauls and special construction for forklifts from 8 tons. We would also be happy to exhibit your vehicle for commission sale. Fork positioner, Heating, full cabin, Platform height: 1050 mm

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 13,329 h, load capacity: 6,000 kg, lifting height: 4,000 mm, free lift: 1,500 mm, fuel type: gas, mast type: duplex, construction height: 2,900 mm, fork carriage width: 1,460 mm, fork length: 1,200 mm, empty load weight: 9,490 kg, total length: 5,120 mm, drive type: Treibgas, construction width: 2,000 mm, Sideloader Load center of gravity: 600 Fork width: 180 mm Fork thickness: 60 mm Mast type: Duplex Condition: Ready for use and fully functional Technical condition: Very good Iodpfx Aewaca Hsb Noat Front tires type: Superelastic Front tires size: 3.00-15 Rear tires type: Superelastic Rear tires size: 3.00-15 Description: In addition to this Jumbo model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an over-the-counter basis, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this JGQ 60/12/40V. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and above. We would also be happy to display your vehicle for consignment sale. NIVO forks Heating, full cab, full free lift, Platform height: 1050 mm

Year of construction: 2000, condition: used, machine/vehicle number: SIxx, Demag chain hoist crane hoist 5000 kg DKUN 20-2500 K V1 F4 Iajdpfxjrft Nzs Ab Nst Payload 5000KG / 5t payload / lifting load - 2-strand with 2 lifting speeds, lifting height approx. 6m without control bottle, complete with lifting eye and chain storage Complete weight approx. 120 kg, connection to 400V 50Hz Used Condition Item location is 75053 Gondelsheim See pictures

Condition: used, functionality: fully functional, Year of construction: 2006, operating hours: 3,650 h, load capacity: 5,000 kg, lifting height: 4,500 mm, fuel type: gas, mast type: duplex, construction height: 3,150 mm, fork length: 1,200 mm, drive type: Treibgas, Side loader Iasdpfxeycm Dts Ab Not Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: good

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 6,951 h, load capacity: 5,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, construction height: 2,800 mm, fork length: 1,400 mm, drive type: Diesel, Sideloader Iasdju Ac Injpfx Ab Net Mast type: Standard Technical condition: good

Year of construction: 1997, condition: ready for operation (used), Various devices and machines are available. 1) Small vibrating mill William Boulton. 2) Compressor motor KDT 2.80, power: 2.3kW, quantity: 3. 3) Roof ventilator, quantity: 2. 4) Oven. 5) Pump (DIA) SZ80-1KR 225. 6) Robot Fanuc M-410i, year of manufacture: 1997. On-site inspection is possible. Iajdown H Uwopfx Ab Not

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2004, operating hours: 9,495 h, load capacity: 6,000 kg, lifting height: 4,000 mm, free lift: 325 mm, fuel type: diesel, construction height: 2,900 mm, motor manufacturer: Perkins, Equipment: cabin, lighting, Diesel Sideloader JUMBO J/SHP60/15/40 Iajdpfxoyk Tc Sj Ab Net Year of manufacture: 2004 According to hour meter: 9,495 hours Perkins engine 6 ton lifting capacity 4 metre lift height 2.90 metre overall height 1.50 metre fork length - Full cab with heating and radio - Lighting system - Immediately operational! - MADE IN AUSTRIA! Sale price: €13,500 net Low-cost delivery available!