Used Mechanical Shear for sale (7,712)

Condition: used, Year of construction: 2013, control type: CNC control, controller manufacturer: ELGA, working width: 3,100 mm, sheet thickness (max.): 6 mm, power: 10 kW (13.60 HP), input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 210 bar, pressure (max.): 210 bar, overall weight: 6,000 kg, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, safety light barrier, We offer this used UZMA HSB 3006 guillotine shear, year of construction 2013. Type: HSB 3006 Todpfezt Hguex Anteb Year of Manufacture: 2013 Series Number: 1308144 Maximum Cutting Length: 3100 mm Maximum Cutting Thickness: 6 mm Maximum Hydraulic Pressure: 210 Bar Approximate Weight: 6000 kg Main Motor Power: 10 kW Voltage: 400 Volt Number of Phases: 3Ph + N + GND Frequency: 50 Hz Overall Full Load Current: 25 A Minimum Light Beam Distance from Blades: 1860 mm If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), functionality: fully functional, Guillotine Shear – Mechanical Model: HSM-F 15/3.0 Machine No.: 11644-0995 Year of manufacture: 1995 Condition: Good, operational condition TECHNICAL DATA Cutting capacity: 1,550 x 3.0 mm Cutting angle: 2° Number of cuts per minute: 35 Motor power: 3 kW with brake, 380 V/50 Hz Manual backgauge: 0-500 mm Weight: 1,255 kg EQUIPMENT/ACCESSORIES  Angle stop with ruler  Double-edged blades  Foot switch  Documentation Tsdpfeydk Acjx Antjb

Condition: like new (used), Year of construction: 2023, operating hours: 1 h, actuation type: manual, working width: 2,030 mm, back gauge: 750 mm, Equipment: documentation/manual, type plate available, Panel shear, like new, unused. The machine was delivered by Schröder in January 2023 and put into operation. Since it was unsuitable for the intended application (see photos), it was subsequently stored and is in absolutely new condition. The new price was €12,381 (excluding transport + assembly). Manufacturer: SCHRÖDER Tedpfx Aozl A Raentsb Type: HS 2000 x 1.25 Year of manufacture: 2023 Usable length: 2,030 mm Cutting capacity at 400 N/mm2: 1.25 mm Equipment: - Rear stop 750 mm, digital display, adjustable at the front - Hold-down device 750 mm - Stainless steel blade - Clamping beam with hard rubber strip - Front support table, extendable - Angle stop right + left - Sliding carriage

Condition: good (used), Year of construction: 1991, machine/vehicle number: 110 302, Offer 26213 Technical data: - max. working width 1030 mm - max. material thickness at 40 kg/mm² tensile strength 2 mm - adjustable back stop 10 - 500 mm - front angle stop - extendable front support approx. 400 mm - space requirement approx. W 1250 x H 1050 x D 750 mm - weight approx. 700 kg Tedpfezwm Rzjx Antsb

Condition: used, Year of construction: 2011, machine/vehicle number: 300195, Item No. 24215 Technical data: Tsdpfotpnldsx Anteb - max. working width 3040 mm - max. material thickness 4 mm - manual adjustment of cutting angle - stroke rate up to 34 1/min - rear stop with positioning control Pos100, 750 mm - front angle stop - 2 front support arms - rear guard with light barrier - electric foot switch - pneumatic connection 6 bar - power supply 400 V - space required without support arms approx. W 4000 x H 1400 x D 2100 mm - weight approx. 4700 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: 00521120, MACHINE SPECIFICATION Maximum cutting thickness 1.5mm Maximum Cutting length 1030mm Shear angle 3 degrees Working pressure 7 to 10 bar Todpfx Aozia Nzentsb Dimensions (L x W x H) 1380mm x 1210mm x 1300mm Approximate weight 195Kg MACHINE EQUIPPED WITH Squaring arm Rear guarding Trailing footswitch

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: 6.088.177.254, controller model: Durma DT-7, working width: 3,100 mm, sheet thickness (max.): 13 mm, overall weight: 11,800 kg, TECHNICAL DETAILS Max. sheet thickness: 13 mm Todpszuwvvefx Anteb Max. working width: 3,100 mm Overhang: 50 mm Design: Swing-beam Angle adjustment: Manual Shear gap adjustment: Motorized Back gauge type: Electric Back gauge depth: 1,000 mm MACHINE DETAILS GENERAL Control system: CNC Controller: Durma DT-7 Drive type: Hydraulic Power: 30 kW Dimensions & Weight Dimensions (L x W x H): 4,200 x 2,350 x 2,350 mm Weight: 11,800 kg Transport packages: 1 unit EQUIPMENT CE marking Finger guard: Fixed with fold-up guard Table type: Ball-bearing table

Condition: good (used), functionality: fully functional, We are offering our used sheet piling shear for sale. This machine was developed and built by us in the past for cutting sheet piles to size. The machine is in good working condition and is still in use. However, as we currently have very few projects that require this machine, we have decided to sell it. Optionally, the associated racking system for storing the sheet piles can also be included. The suction cup that is currently attached can also be included. However, the suction cup is not currently functioning properly; the problem is likely in the mechanism. Also, the remaining stock of sheet piles can be taken over upon consultation. If you have any questions or would like more information, please send us a message or call us. Todpfx Anszxc I Eetjb

Condition: excellent (used), Year of construction: 2016, Cidan CNC plate shear in top condition. I would be happy to send you a video! The shear is in very good technical and optical condition; all bearings are in perfect order. The machine comes from a small business and has been well-maintained and serviced accordingly. Ideal for sheet metal workers, roofers, carpenters, metalworkers, or workshops looking for a precise and reliable bending machine. Advantages of the machine: • Brand quality from Cidan • Very good condition • Precise operation • Ready for immediate use • Robust professional machine Sale: Tedpfx Anszunvtjtjb • Machine price, net • You will receive a proper invoice with VAT shown • Shipping or freight forwarding possible (upon request) • Inspection possible by appointment Please note: If you are interested, please contact us by phone. Phone: You can also find other sheet metal working machines and matching shears in my other listings. Quality you can rely on. Are you looking for an honest, stable in value, and technically sound machine?

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 29000 € 553.9 € 2050 mm 4 mm Tjdpfx Aewir Dtentjb 42 1/min 750 mm 7.5 kW 800 mm 450 mm 2700 mm 2300 mm 1350 mm 2800 kg motorizedback gauge atrecirculating ballscrew with Control DT5 hold down with rubber pads Side Lay with T-Slot 2 Sheet support arms ball in the table tape measure tilting stop light barriers on the back of the machine cutting line illumination user manual in GERMAN and ENGLISH

Condition: good (used), Year of construction: 2006, machine/vehicle number: 38461, Offer 26186 Technical data: - max. working width 1275 mm Todpfx Aoztvn Ujnteb - max. material thickness (at 40 kg tensile strength) 3 mm - front angle stop - front material supports approx. 300 mm - rear stop, manually adjustable 5 - 650 mm - stroke rate approx. 32 /min - cutting angle 1.9 ° - preselection for single stroke / continuous stroke - drive 400 V / 3.0 kW - E – foot switch - protective guard on the rear of the machine - space required, including rear stop, without front support arms - approx. W 1500 x H 1150 x D 1450 mm - weight approx. 1200 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, Capacity: 1040 x 3.5 mm - Light gauge sheet metal protection at the rear - Ortlinghaus brake and clutch combination Tjdpfozq Uvxsx Antsb - Tilting roller table or sheet metal lifting system with plastic rollers - Central lubrication system

Condition: used, Continuous cutting performance: 3.5 mm ST ----- 2 mm V2A --- Standard machine in good condition. Tjdpjzwkpzofx Anteb

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 40 h, Guillotine shear with a maximum of 40 operating hours, Cutting capacity: 3.5 mm sheet thickness, tensile strength 200 N, Cutting capacity: 2.5 mm sheet thickness, tensile strength 400 N, Cutting capacity: 1.65 mm sheet thickness, tensile strength 600 N (V2A), Used only for 1.5 mm coated sheets, Hold-down opening: 25 mm (can be reset to factory spec), Strokes per minute: 56, Todpfx Anoxal Uwstob Light barrier, Cutting angle: 2.4°, Upper blade has a 60° pointed grind for use with plastic-coated sheets. The upper blade is non-reversible. Rated power: 4.0 kVA Weight: 860 kg.

Condition: good (used), Year of construction: 2001, machine/vehicle number: 122019, Offer 25507 Technical data: - Max. working width: 2520 mm - Max. material thickness: 2.0 mm - Cutting angle: 2.2° - Stroke rate up to: 25 strokes/min - Backgauge with ELGO position control up to 750 mm Todpfxox S Ed Ej Antjb - Table height: 850 mm - Front angle gauge: 2000 mm - 2 front support arms: 1000 mm - Pneumatically assisted sheet support - Electric foot pedal - Single or repeat stroke selectable - Rear safety guard - Drive: 400 V / 3 kW - Space requirements: approx. W 3450 x H 1150 x D 2200 mm - Weight: approx. 1600 kg

Condition: used, Year of construction: 1974, total length: 1,700 mm, total width: 1,400 mm, total height: 1,200 mm, Colour: Grey Weight: 1.000 kg - Year: 1974 - Documentation available: No - CE certificate present: No - Serial number: 72 - Drive system: Conventional - Drive type: Mechanical - Max. sheet thickness [mm]: 3 - Max. working width [mm]: 1050 - Backgauge type: Manual - Backgauge depth [mm]: 500 - Table type: Standard table - Transport dimensions: 1700mm x 1400mm x 1200mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tedpozry Susfx Anteb Lukas van Rossum

Condition: good (used), Year of construction: 1974, Stock number: 2986 Make: Piesok Year of manufacture: 1974 Type: NTE 3150/6.3A Machine number: N65-101 Cutting length: 3,150 mm Cutting thickness: 6.3 mm Table: mm Backgauge: 600 mm Front supports: Condition: good Power: 11 kW Tsdpowlz Hijfx Anteb Weight: 8.5 t Dimensions: 4,000 x 1,700 x 1,800 mm

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, For sale is a complete, modern production line for manufacturing and processing electric motor stators, produced by the reputable NIDE Group (year of manufacture: January 2017). The machines are fully automated (CNC/PLC control) and formed a cohesive production flow within the facility. The equipment has CE certification. The complete line consists of 5 processing stations: Coil Winding Machine: Model RXL2-160. Winding Inserting Machine: Model QX1-150/160. Middle Forming Machine: Model Z2XJ1-160/190. Double Side Lacing Machine: Model BXIIL1-160/160 (with a rotary table integrated into the process). Final Forming Machine: Model Z3XJ1-200/210T (with its own hydraulic power unit). Tsdpfx Ajzuukqsnteb Along with a comprehensive set of tooling! We also sell the original toolboxes containing mandrels, forming heads, and dies, which enable quick changeovers for production (as seen in the photos). The line is ready for loading from the warehouse in Ostrzeszów. Please contact us.

Condition: good (used), Year of construction: 1977, machine/vehicle number: 1172, Offer 23443 Technical data: Tsdpfx Anerckh Sjtsb - max. working width 1250 mm - max. cutting capacity St 40 3 mm - Cutting angle 2.30 ° - Cutting gap adjustment by hand - Projection 200 mm - Manual backgauge 10 - 500 mm - Drive 400 V / 2.2 kW - Table height approx. 800 mm - Space requirement incl. backgauge - approx. W 1850 x H 1200 x D 1450 mm - Weight approx. 1700 kg

Condition: good (used), Year of construction: 1990, machine/vehicle number: 63/4, Offer 26093 Technical Data: Tedsyzpbmspfx Anteb - Max. cutting length: 3050 mm - Max. material thickness at 40 kg/mm² strength: 2.5 mm - Cutting gap adjustment - Cutting angle: 1°35′ - Strokes: 50 1/min - Frame throat: 100 mm - Table height: approx. 750 mm - Front angular stop: 850 mm - 2 support arms: 500 mm - Manually operated backgauge accessible from front: 5 – 750 mm - Pneumatic sheet support - Electric foot switch - Drive: 400 V / 5.5 kW - Required space: approx. W 3800 x H 1500 x D 1400 mm - Weight: approx. 2900 kg

Condition: good (used), Year of construction: 2016, machine/vehicle number: 12300379, Offer 26209 Technical data: - max. working width 1020 mm - max. material thickness 2.5 mm - cutting angle 2.4 ° - stroke rate up to 34 1/min - manual rear stop with digital position display 500 mm - table height 850 mm - front angle stop - front extendable material support - pneumatically assisted sheet metal lifting with sheet metal discharge to the front Tsdpfxozrk Ruj Anteb - electric foot pedal - tapping – single stroke can be preselected - rear safety guard - mounted on a steel plate - pneumatic connection 6 bar - drive 400 V / 3 kW - space requirement approx. W 2100 x H 1150 x D 2200 mm - weight approx. 1400 kg

Condition: good (used), Year of construction: 2006, machine/vehicle number: 313406334, Offer 24236 Technical specifications: Tedpfx Ajwd Nu Sentjb - Max. working width 2550 mm - Max. cutting capacity St 40 4.0 mm - Cutting angle 1.30° - Position-controlled backgauge 20 - 750 mm - Front angle stop + support arms - Electric foot switch - Stroke rate up to 34 per minute depending on cutting length - Drive 400 V / 3 kW - Table height approx. 850 mm - Space required including backgauge, without front support arms - Approx. W 3250 x H 1250 x D 2000 mm - Weight approx. 3500 kg

Condition: new, Year of construction: 2025, sheet thickness steel (max.): 2 mm, table height: 825 mm, back gauge travel distance R-axis: 630 mm, input voltage: 380 V, overall weight: 1,360 kg, total length: 2,700 mm, total width: 1,500 mm, total height: 1,200 mm, warranty duration: 12 months, cutting length (max.): 2,050 mm, working length: 2,050 mm, Equipment: documentation/manual, finger protection, Mechanical sheet metal guillotine METFORMER MCO-2x2000mm The guillotine is made entirely of steel, the structure is solid and heavy. Simple design with good looks. It is easy to use. This guillotine is widely used for cutting thin and medium steel sheets in light engineering, hardware manufacturing. The blade is made of a super strong steel alloy. Tedpfx Aovlxh Ejntjb Technical data: Model, MCO-2x2000, Engine power, kw, 3.0, Maximum sheet thickness (mm), mm, 2, Number of knife changes, pcs, 4, Length, mm, 2800, Width, mm, 1260, Height, mm, 1300, Weight, kg, 1350,

Condition: good (used), Year of construction: 1989, machine/vehicle number: N 74-1057, Offer 24454 Technical data: - max. cutting width 2520 mm - max. cutting capacity at 45 Kp/mm² 4 mm - Cutting angle 1°15 - throat depth 200 mm Todeuzvpcjpfx Antjb - Stroke rate up to 30 /min - front angle fence 1100 mm - front support arm 400 mm - mot. back gauge 5 - 600 mm - cutting line lighting - Sheet support - E - foot switch - Drive 400 V / 7.5 kW - Space requirement approx. W 3750 x H 1650 x D 2100 mm - Weight approx. 3.8 t

Condition: used, functionality: fully functional, Year of construction: 1984, Equipment: documentation/manual, type plate available, Crank-driven plate shear Manufacturer: Fasti, Type: 507 – 20 - 3 Year of manufacture: 1984 Technical data Manufacturer: FASTI Type: 507 – 20 - 3 Year of manufacture: 1984 Sheet metal width: 2040 mm Sheet metal thickness: 3.00 mm Tjdpfxszpxdqj Anteb Overhang on the stand: 100 mm Number of strokes: 65 Motor power: 7.5 kW Dimensions: L 2.65 x W 1.20 (plus 0.8 m support arms) x H 1.3 m Weight: 2.1 t Equipment - Rear stop, 500 mm, manually adjustable - Adjustable clamping pressure - Angle stop - Support arms - Manual adjustment of the cutting clearance!!! - 4 x spare blades (2 x top blades / 2 x bottom blades) - Documentation All information is subject to change without notice. A demonstration is possible at any time in our showroom.