Used Mert Makina M1400 for sale (362)

Condition: new, functionality: fully functional, Memmert VO500 & PMP500 Vacuum Oven Both devices are brand new & unused. Purchased for a project in a pharma plant in Cork, IE, but the project was cancelled before completion Nedpfoym Arusx Akuswg

Condition: ready for operation (used), Memmert SFE 600 heating furnace Nwedpfoip Um Aex Akujg max. 70°C For further technical data see pictures. You are welcome to come by for an inspection. You will receive a proper invoice. For foreign customers can also be a net invoice. Prerequisite is a valid Ust.Indent.Nr. Subject to prior sale. Visit our store and see our other offers. Indicated company names and trademarks are the property of their owners and serve only for identification and description of the products. Deviations from technical data and errors in the description of the article can happen and remain reserved.

Condition: good (used), Year of construction: 1993, operating hours: 3,800 h, functionality: fully functional, overall weight: 10,500 kg, fuel type: diesel, power: 1,299 kW (1,766.15 HP), motor manufacturer: Deutz, A used emergency generator is offered with the following data. Technical data: Engine: Deutz TBD 620 V12 Generator: Piller Power: 1400 KVA Frequency: 50 Hz Nwodpfevmzwxox Akuog Voltage: 230/400 V Year of manufacture: 1993 Operating hours: 3800 Incl. control cabinet Incl. silencer

Condition: used, pressure 160 t passage width / mm stroke / mm Working height 800 mm total power requirement 15 kW weight of the machine ca. 11,8 t - Table size: 1000x1000mm Nedjiulkqepfx Akuewg - Distance table/ram, large stroke above, gain. above: 800mm extra information Removable table

Condition: used, Manufacturer : Memmert Model: B 30 Type : universal oven / incubator   Maximum temperature : 70°C Nwodpfx Akex R Aulsuog Power : 800 W Total volume : 48 L Inside dimensions : 380 x 300 x 380 mm

Condition: ready for operation (used), Year of construction: 2017, operating hours: 2 h, functionality: fully functional, machine/vehicle number: LM 500 W6-P, Due to lack of use, a Plasmek Plastic Makinalari LM500 W6-P laminating machine is for sale. The machine has virtually 0 operating hours and has not been used. All parts and accessories are included. Special offer: now only €39,500. Nodpjw H Rpvsfx Akuowg

Condition: good (used), Memmert B60 Incubator Nwjdjxlq Nkjpfx Akueg For sale is a used B60 incubator from Memmert. Technical details: Manufacturer: Memmert Model: B60 Design: Incubator / Heating Cabinet Temperature range: approx. +10 °C above room temperature up to 70 °C Power: approx. 2000 W (220 V / 50-60 Hz) Areas of application: Laboratory, research, industry, medicine Condition: Used, functional Buy Memmert B60 incubators and other items at affordable prices – Here you can buy products from professionals for professionals – You'll find other attractive offers in our SHOP.

Condition: good (used), Memmert precision incubator, 256 liters Manufacturer: Memmert Model: ICP 600 Temperature: 0°C to 60°C Volume: 256 liters Power: 700 W Interior width: 800 mm Interior height: 640 mm Interior depth: 500 mm Device width: 958 mm Device height: 1335 mm Device depth: 656 mm Max. number of shelves: 7 Max. load per shelf: 30 kg Nwodpfx Akjxal Ukoueg Max. load per device: 80 kg Weight: 144 kg You can find more items—new and used—in our shop! International shipping costs on request!

Year of construction: 2002, condition: excellent (used), Parts in contact with the product are made of stainless steel 1.4571, the rest of the dryer is made of 1.4301. Machine Name: Continuous Horizontal Vacuum Paddler Dryer used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Construction year: 2002 Speed: 107 rpm Material: 1.4301 Driving force: 5,5 kW Nwodpoitcu Esfx Akujg Model: EExdellCT4 Total content: 235 Liter Parts in contact with product: 1.4571 Equipment: Double jacket, mechanical seal Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Technical documentation: Yes Message: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame Condition: Used

Year of construction: 2002, condition: excellent (used), machine/vehicle number: Reg Nr. 976, Machine Name: Paddle dryer Used Manufacturer: AVA / Holland Merten GmbH Nwedpfx Akeitcvujuog Type: HTK 200 Construction year: 2002 Speed: 107 U/min Material: Stainless steel Driving force: 5,5 KW Model: EExdellCT4 Total content: 235 Liter Parts in contact with product: Stainless steel 1.4571 Gear box: Stirnradgetriebemotor Equipment: Double jacket, mechanical seal, shaft heater Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Message: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame, Maier head HWR 225 Condition: Used very good Price: on request

Condition: ready for operation (used), Memmert ULP 600 Universal Oven Nsdpfx Asxxlawjkuowg Nominal temperature: 220 °C Internal dimensions: 800 x 500mm x 640mm (W x D x H) External dimensions: 1200mm x 750mm x 1600mm (W x D x H) Without trolley: 950mm x 650mm x 920mm (L x W x H) With trolley: 1000mm x 660mm x 1750mm (L x W x H) Weight: approx. 175 kg You are welcome to visit for an inspection. We can also arrange a cost-effective shipping service for you! You will receive a proper invoice. For international customers, a net invoice can be issued provided you have a valid VAT ID number. Sale subject to prior sale. Visit our shop and take a look at our other offers as well. All specified company names and trademarks are property of their respective owners and are used for identification and description purposes only. Deviations from technical data and errors in the description may occur and are subject to change.

Year of construction: 2015, condition: used, functionality: fully functional, machine/vehicle number: B115.0548, Technical characteristics: Core Specifications - Temperature range: +20 °C to +300 °C - Temperature control: PID microprocessor with single display (TFT color screen) - Sensor: 1 × Pt100 DIN Class A, 4-wire circuit - Setting accuracy: • Up to 99.9 °C: 0.1 °C • From 100 °C: 0.5 °C - Volume: 32 litres - Internal dimensions (W × H × D): 400 × 320 × 250 mm - External dimensions (W × H × D): 585 × 704 × 434 mm - Max. load capacity: 60 kg (20 kg per shelf) Nwjdsyana Dspfx Akueg - Number of shelves: 1 stainless steel grid (max. 3 possible) Ventilation & Heating - Circulation type: Natural convection - Heating system: Four-sided large-area heating - Fresh air control: Electronically adjustable air flap - Vent connection: With restrictor flap Electrical & Environmental - Power supply: • 230 V, 50/60 Hz, approx. 1600 W • 115 V version also available - Ambient temperature range: +5 °C to +40 °C - Humidity tolerance: Max. 80% RH, non-condensing - Altitude limit: Up to 2,000 m above sea level Control & Safety - Timer: 1 minute to 99 days - Set point WAIT function: Timer starts only after set temperature is reached - Overtemperature protection: • Electronic monitor • Mechanical safety limiter (TB), DIN 12880 Class 1 - Calibration: 3 user-selectable temperature values - Documentation: Atmo CONTROL software via USB or Ethernet - Interface languages: English, German, Spanish, French Construction & Materials - Interior: Stainless steel, electropolished - Exterior: Textured stainless steel (rear panel: zinc-plated steel) - Door: Fully insulated with 2-point compression lock - Net weight: ~45 kg This oven is ideal for drying, heating, ageing, and hardening processes in research, quality control, and industrial laboratories. Machine status: WORKING

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 4000 S Full Otomatik Alüminyum Pvc Çift Kafa Kesim Makinası, functionality: fully functional, - It is a fully automatic controlled cutting machine designed to cut PVC and Aluminum profiles straight or angled with a double head Ø550 mm saw. - Complies with CE standards. - Hydro - pneumatic hydro-check controlled saw movement - Cutting accuracy +/- 0.1 mm - Automatically adjusts to two inward angles of 90 and 45 degrees - Automatic slicing at 90 degree angle - 10" touch color panel display - Remote connectivity and technical support - 2 Ø550 mm saws - Servo motor motion system - 180 mm saw exit distance and cut 80 mm x 2 profiles - Hydro-check saw speed adjustment - 8 meter cutting feature - Multi-language support - Unlimited size capacity - Spray saw cooling system - 2 vertical clamps - 4 horizontal clamps OPTION Nwsdpfxoramypj Akueg - Barcode printer - Data transfer via USB memory

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 551 S ALUMİNYUM FREZE MAKİNESİ, • Used for machining lock handle positions, hinge and espagnolettes slots, and custom-sized channels on aluminium and plastic profiles • Copying fixture suitable for the required operation • Independent channel milling feature via guide stop, in addition to copying fixture Nodjydu Hrspfx Akujwg • Powerful 1.1 kWh / 1.5 HP motor • 13,500 rpm milling motor speed • 220 / 230 VOLT, 50/60 HERTZ • 5 mm milling cutter supplied as standard OPTIONS • Base cabinet system • Pneumatic system

Condition: new, Year of construction: 2026, VFK MANUAL POWDER COATING BOOTH WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists of pulse valves and a compressed air tank, controlled automatically or operated using manual buttons on the control panel. POWDER RECYCLING As a result of the filter cleaning system, powder coating particles fall down and are manually collected in a bucket at the bottom of the filter unit. This bucket can optionally be a simple drawer or can be with a sieve having a vibration motor with a powder pump to sift the powder coatings collected on it and transfer the sifted powders for reuse and send it to the powder recovery system for reuse. The powder coating booth is designed as single-sided open type for manual powder coating. There is an electrical panel on the system and the electrical wiring up to the motors has been done. Made in Türkiye CE Mark We offer the best technical solutions and competitive prices Njdpfx Asvv Rfkjkuowg Contact us for more information and quotations

Condition: new, Year of construction: 2025, DESIGN VFDK powder booths are designed as an open wall cartridge filtered for manual powder coating use from one side. Powder booths are manufactured of externally powder coated sheet metal structure with castor wheels at the ground. The system consists of filtration system with automatic cleaning, ventilation and electrical control panel. Long lasting 100% polyester cartridge filters are used for high efficiency. WORKING PRINCIPLE Air flow generated by the extraction fan carries overspray powder coating particles to the filter unit and collects them at the outer surface of the filters. Filters are cleaned by pulse valve operated pull-reverse system during the operation. Powder coatings accumulated by this way at the ground of powder booth are collected manually in the drawer and can be reused after sieving. Nodpfx Ajvv H Hdjkuswg A hopper with vibrated sieve can be added optionally for powder recycling. ADVANTAGES Saves space in the workshop Easy and fast cleaning Made in Türkiye CE Mark We offer the best technical solutions and competitive prices Contact us for more information and quotations

Condition: new, Year of construction: 2025, POWDER COATING SYSTEM FOR CAR WHEELS AND RIMS Oven contains 4 pieces of 22’ wheel rims in 1 batch COMPONENTS OF THE PLANT: * 1.5x1x1.3m POLYMERIZATION OVEN, 18KW ELECTRICAL * VFK-2 ONE-SIDED POWDER COATING CABINET Nwedpfjvv Rfdjx Akueg * OVERHEAD CONVEYOR AND LOAD TROLLEYS Delivery: 6-8 weeks EXW Istanbul factory Assembly and training included We offer the best technical solutions and competitive prices Contact us for more information and quotations

Condition: new, Year of construction: 2025, VG1E-VN MANUAL FAST COLOR CHANGE TYPE POWDER COATING SYSTEM The powder coating system is designed for powder coating applications with frequent color changes during the day. The equipment is on a wheeled stand for ease of operation. Powder coating is sucked directly from the powder box, which allows rapid color changes. The powder box is placed on the vibrating table, suction pipe fluidizes the powder coating in the box, ensuring effective mixing, and the powder coating is homogeneously sent to the gun through an injector placed on the suction pipe. TECHNICAL SPECIFICATIONS Input voltage : 220V 50Hz Air need : 350 lt/min Input pressure : 6 bar Vibration motor : 220V 25W Gross weight : 55 Kg VG4 CONTROLLER AND MANUAL POWDER COATING GUN The VM manual powder coating gun is completely dismountable. The ergonomic gun handle design ensures ergonomic handling and does not tire the operator during coating application. The high voltage cascade has a long service life, its tightness prevents contact with dust and minimizes the risks in this area. The well-designed head assembly and nozzle ensure excellent polarization and homogeneous coating on surfaces during application. The electronic touch panel on the back of the gun provides ease of use during operation. The control unit is digital and allows precise adjustment of settings via the touch panel. TECHNICAL SPECIFICATIONS Gun Type : Corona System Polarization : Negative Cascade input voltage: 0-10,5V DC Output voltage : 100 kV Output current : 0 -150 μA Powder output (3,5 bar) 500 g/min Protection class : IP 54 Voltage cable length : 5 m Powder hose length : 5 m Gun weight (gross) : 450 g Operating temperature :-20-50 ° C Nozzle :Flat jet or Ø16-20-24mm deflectör Nwedpjvv N Tyjfx Akusg

Condition: used, For sale are the Multivac forming and closing tools shown in the pictures. There are 2 sets. Each for a foil width of 420mm. Multivac 19.200.1240.95 6x11cmx18cm tray size. Price: 2000 eur the other is 9x11.5cmx11cm item number 105793236, price 2000 eur. Nedpswth Uiofx Akuowg

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 451 PORTATİF KESİM MAKİNASI Ø400 mm, • Used for cutting aluminum and PVC profiles • Diamond-tipped saw blade • Double spring system and saw blade guard for safe cutting • Capability to cut at any desired angle between -45 and +45 degrees on the top table • Angle locking to the right and left at 0, 15, 22.5, 30, and 45 degrees OPTIONS • Lower cabinet body system Nsdporcm Absfx Akuswg • Right-left measuring system • Pneumatic press and cooling system

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 441 Portatif Kesim Makinası Ø300 mm, - Used for cutting aluminum & PVC profiles - Double spring system and saw guard safety cut - Cutting on the top table Ability to cut at all desired angles between -45 and +45 degrees - Right and left angle stabilization at 0, 15, 22.5, 30, 45 degrees OPTIONS - Lower cabinet body system Nwedpfx Aorcmzdjkuog - Right-left meter system - Pneumatic press and cooling system - Diamond tipped saw

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PVC Çift Kafalı Üretim Makine Set, • Enables the production of 80 - 120 windows in an 8-hour working environment. Nwjdpfxorfyzfo Akuog • Our set offers fast production capability to customers with different machine options. • Available in 380 Volt or 220 Volt versions. • Compliant with CE (European) standards. • Door-to-door delivery prices to any destination worldwide. • References available from our previous customers in your country. MACHINE CONTENT • SC 400 Aluminum & PVC Double Head Cutting Machine (Ø500 mm saw option) • SC 100 PVC Double Corner Welding Machine (0.2 mm welding capability) • SC 501 Aluminum & PVC Handle Slot Drilling, Channel Milling, and Water Drainage Machine • SC 301 Aluminum & PVC Bead Cutting Machine • SC 211 Aluminum & PVC Mullion Preparation Machine (2 blades) • SC 601 Automatic Corner Cleaning Machine You can increase your production capacity with different machine options. Please contact us for the catalogue.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 902 S Hidrolik Alüminyum Köşe Presi Makinesi, • Complies with CE standards • Corner press machine designed for joining aluminium profiles at 90 degrees • 2 upper presses and blade movement are hydraulic • Equipped with a mm scale system for adjusting blade height and feed • Centering square stop is hydraulic • Drain button for fine adjustment is available Nedpfsrbk Tfjx Akuewg • Machine comes with 2 pieces of 4 mm blades • 2 pedals are used for hydraulic pressing and profile clamping • Polyamide plate is provided to prevent damage to profile surfaces • Left and right profile support arms are available

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 901 S Pnömatik Alüminyum Köşe Presi Makinası, - Conforms to CE standards - Corner press machine designed for 90 degree joining of aluminum profiles - 2 top presses and blade movement is pneumatic - There is a mm ruler system for the height and advancement of the blades. - Centering miter wedge is automatic - Drain button available for fine adjustment - Pneumatic presses use 2 pedals to squeeze the profile - Profile surfaces are polyamide sheet to prevent damage - Side support arms available Nsdpfx Akerbiv Aeujwg

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 431 Alüminyum Pvc Manuel Üstten Kesim Makinesi, • Complies with CE standards. • The machine can cut at +45, -45, and intermediate angles. • Quick setting stops for 90, 75, 60, and 45 degrees. • Table locking lever for intermediate angles. • Profile clamping is pneumatic for practical use. • Diamond saw blade diameter is Ø400 mm. Njdjramzuspfx Akujwg • Standard with measuring and material handling conveyors (2.5 meters on both left and right sides). • Cooling unit for cutting aluminum profiles. • Capability to work with a digital meter. OPTIONAL: • Roller conveyor system (3 meters on both left and right sides).