Used Mfc Sensortechnik Gmbh T500 (5Kn) for sale (69,446)

Condition: new, Year of construction: 2024, functionality: fully functional, total height: 1,950 mm, construction height: 300 mm, lifting height: 1,650 mm, load capacity: 1,500 kg, overall weight: 450 kg, total length: 2,500 mm, total width: 800 mm, table width: 800 mm, table height: 1,950 mm, table length: 2,500 mm, transport length: 2,500 mm, transport width: 1,200 mm, platform width: 1,200 mm, platform length: 2,500 mm, space requirement length: 2,500 mm, space requirement height: 1,950 mm, space requirement width: 1,200 mm, power: 1.1 kW (1.50 HP), Equipment: documentation/manual, Technical description with the following main data: Load capacity 1500 kg static line load effective stroke 1650 mm Overall height 300 mm Total height 1950 mm Platform length 2500 mm Platform width 1200 mm Material smooth sheet metal Lifting time approx. 35 sec. for the full effective stroke Lowering time load-dependent Laodpfxjuhphvj Am Nea Electrical connection 3 x 400 V/ 50 Hz + protective earthing, with 16 A CEE plug and 3 meter cable Motor 1.1 kW, 1,400 rpm. Valve voltage 24 V DC Sealing degree IP 54 general, solenoid valve and switch IP 65 Paintwork dust gray RAL 7037 Power unit position integrated in the lift table Control box dead man's control incl. 2 m cable Total weight approx. 450 kg

Condition: new, Year of construction: 2025, - Mobile scissor lift table with sturdy platform upper frame and a bolted-on workbench top - Lifting up/down is operated via a hydraulic foot pump - Load capacity: 350 kg - Base height: 540 mm - Usable lift: 610 mm - Maximum height: 1150 mm - Stable platform upper frame, 970 x 590 mm, located beneath the workbench top - Robust lifting scissor construction with finger guards - Total weight: approx. 160 kg - Steering castors: 2 with brake, 2 without brake - Wheel diameter: 125 mm - Each narrow side features 2 integrated support feet with rotating footplate and rubberized foot surface, allowing the lift table to be used as either a stationary or mobile work station - Powder-coated finish: base frame and platform frame in light grey RAL 7035, scissor elements in violet blue RAL 5000 * Includes widened foot lever for easy operation with the workbench top installed even when the lift table is fully lowered Ledpfx Asrr Twmom Neaa Product data — Workbench: Workbench made of solid beech (50 mm thick), load capacity 200 kg on the workbench Front vice approx. 520 x 70 mm Front and rear vices equipped with spindles ensuring highly precise and stable clamping jaw guidance Rear vice and workbench top equipped with holes for bench dogs Front edge of the workbench top is 130 mm high Workbench drawer runs along the entire rear length for tool storage, includes 4 matching round bench dogs Usable top length: 1,490 mm Usable top width: 620 mm Overall length: 1,700 mm Overall width: 790 mm Workbench top thickness: 50 mm Front edge of bench top: 130 mm high Weight of workbench top: approx. 90 kg

Condition: good (used), functionality: fully functional, For sale the surface grinding, polishing machine Fickert & Winterling GmbH ( Germany ) with NEW grinding head ! Very good working condition max working dimensions: 1,6 x 4,8 m external dimensions : 3 x 3,5 x 6 m ( W x H x L ) Laodpfjy Aznuox Am Nea

Condition: used, Year of construction: 1992, functionality: limited functionality, Paint booth as shown in the pictures for sale, including crane runway as visible in the images. If dismantled by the buyer, price is negotiable. Lodpoy Aldaefx Am Njaa

Condition: new, functionality: fully functional, power: 11.8 kW (16.04 HP), gearing type: automatic, fuel type: diesel, operation weight: 2,000 kg, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.025 m³, Year of construction: 2025, operating hours: 5 h, Equipment: adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, 💥 ONLY UNTIL END OF THE MONTH: 10% DISCOUNT ON THE COMPLETE SET! 💥 HT20 PRO PROMOTIONAL PACKAGE – ACT NOW & SAVE! Instead of €13,500 net, now only €12,150 net Are you looking for a compact, powerful, and ready-to-use mini excavator at an especially attractive price? Then the HT20 PRO is exactly the right choice. Take advantage of our limited end-of-month promotion and secure a fully equipped set with a 10% price advantage. Ledpfx Aox Hvvhjm Nsaa ⭐ YOUR BENEFITS AT A GLANCE ✔ Genuine Kubota D902 engine – reliable, efficient, and durable ✔ Precise load-sensing hydraulics for clean and efficient operation ✔ Comfortable cabin with air conditioning and heating ✔ Adjustable undercarriage – ideal for confined sites ✔ Robust and stable steel construction for professional daily use 🔥 PROMOTIONAL OFFER UNTIL THE END OF THE MONTH The package includes: ✅ HT20 PRO mini excavator ✅ Hydraulic quick coupler ✅ 3 buckets included This gives you a ready-to-use complete solution with attractive features and maximum flexibility for your construction site. ⚙️ TECHNICAL DATA Kubota D902 Diesel 3 cylinders Power: 11.8 kW Operating weight: 2,000 kg Transport length: 2,850 mm Width: 1,220 mm Height: 2,350 mm Max. digging depth: 2,060 mm Max. reach: 3,130 mm Max. dumping height: 2,875 mm 🚀 AVAILABLE IMMEDIATELY ✔ Machine in stock ✔ Ready for operation upon delivery ✔ Delivery possible throughout Europe ✔ Spare parts and service available locally ✔ 12-month warranty 🎥 ADDITIONAL ADVANTAGES FOR INTERESTED BUYERS ✔ Upon request, we will gladly send you a video of the machine ✔ On-site personal inspection possible ✔ Test operation available by arrangement See for yourself the condition, features, and performance before you buy. ✅ WHY THIS PROMOTION? ➡️ 10% discount on the complete set ➡️ High-quality professional features included ➡️ Immediately available and ready for work ➡️ Transparent advice and individual support ➡️ Only for a limited time until the end of the month 📍 LOCATION Rheda-Wiedenbrück ⏳ INQUIRE NOW AND SECURE THE PROMOTIONAL PRICE 👉 Contact us now and secure your promotional package with 10% discount – only until the end of the month! 👉 Video available on request – inspection and test run always possible by appointment.

Condition: new, Year of construction: 2024, functionality: fully functional, total width: 512 mm, total height: 1,952 mm, total length: 772 mm, Directly from the manufacturer, the original from Apfel GmbH. Fully assembled including 2 KRB 4700 shelves 1 storage box KEN 6422 (No. 62) 2 storage boxes KEN 4322 (No. 42) 1 waste garbage can made of sheet zinc 2 brooms 1 hand brush 1 dustpan 1 set of shadowboards 1 compartment for cleaning products 4 swivel castors with parking brake Ljdpjuvigpjfx Am Njaa Load capacity: 400 kg Dimensions: 512 w x 1,952 h x 772 t Structure powder-coated in black gray RAL 7021 (body) Various designs and special solutions possible, we as the manufacturer will support you with your wishes! (See pictures 3+4)

Year of construction: 2016, condition: like new (used), functionality: fully functional, For sale the vertical laser engraving machine CERION LASER GmbH ( GERMANY ) for glass , mirror and acrylic Type: C-vertica Year: 2016 excellent working condition, as NEW ! 3D engraving systems, and image editing software ! The c-vertica enables the processing of glass surfaces with unique structures and motifs, and the laser engraving of two-and three-dimensional designs inside and onto glass with just one machine. Lsdpfx Ajyzc Rbsm Noaa

Condition: like new (used), Year of construction: 2022, functionality: fully functional, The machine can be inspected on site – please arrange an appointment in advance. Lodoy Atqnspfx Am Noaa

Condition: new, functionality: fully functional, Our state-of-the-art automatic tube filling machine is a versatile all-rounder, specifically designed to optimally support companies with the highest quality requirements. Thanks to its superior build quality and wide application range, it offers intuitive operation to efficiently and reliably optimise your tube filling processes. Powerful drives and a user-friendly colour touchscreen control system enable maximum flexibility for format and product changes, greatly simplifying your tube filling operations. The machine features memory slots for rapid and reproducible setting of all relevant machine parameters. If you are looking to optimise your tube filling processes with strong production performance while maintaining high quality, Impuls Packaging is your ideal partner. System Overview Parameters: Power supply: AC 220V / 50Hz or 110V / 60Hz Power: 4 kW Filling range ● 2–5 ml ● 5–30 ml Laodpfjyq Hgkex Am Nja ● 10–140 ml ● 30–300 ml (customisable) Tube diameter: 10–50 mm (customisable) Tube length: 30–250 mm (customisable) Hopper volume: 50 L Filling accuracy: ±1 % Capacity: 40–60 tubes/minute Machine dimensions: 2050 × 900 × 1900 mm Net weight: 850 kg

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 16501575, volume flow: 4,800 m³/h, input voltage: 380 V, power: 2.5 kW (3.40 HP), Equipment: type plate available, The resulting dirt particles, emulsion and oil mist, as well as smoke, are captured directly at the source and passed through the individual filtration stages. The separated liquid collects at the bottom of the unit and can be returned to the machining center via the siphon. In the first filtration stage, larger particles are retained by an aluminum pre-filter to protect the downstream high-performance fleece filters. The second filtration stage removes the majority of fine emulsion and oil mist. This stage consists of an aluminum frame equipped with a G4 filter mat and an F5 filter mat according to DIN 24185 / EN 779. The filter mats must be replaced depending on the degree of contamination. The third filtration stage consists of a large-area HEPA filter of class H13. A consistently high filtration efficiency of 99.95% at a particle size from 0.3μ DOP is ensured here. Type testing in accordance with DIN EN 1822-1 H13 allows the filtered air to be returned to the workspace. Lsdpsyz Sn Nsfx Am Nsaa

Condition: new, Year of construction: 2012, nominal power: 90 kW (122.37 HP), overall weight: 4,500 kg, torque: 26,196 Nm, For sale is an excellently maintained stock of 24 unused industrial gear motors from the German premium manufacturer NORD Drivesystems. These units originate from a project cancellation (Schenck Process) and have been professionally stored, dry and in their original packaging, since initial delivery in 2012. As new orders in this power class currently often face excessive lead times, this inventory presents a rare opportunity for immediate commissioning or strategic spare parts coverage. Your advantages: Condition: Factory-new / unused (New Old Stock). Preservation: All gear units are filled with VCI synthetic oil (special long-term corrosion protection for internal components). Configuration: High-quality MAXXDRIVE block housings, some including independent cooling fans (W FAN), backstops, and auxiliary drives (MST). Immediate logistics: All units are securely fastened and cranable on original shipping frames/pallets. Laedpfx Amjy A Evce Nja Key technical data of the stock: We offer various models for the most demanding applications (bucket elevators, chain conveyors, shredders): Power classes: 37 kW, 45 kW, 55 kW, 75 kW, and 90 kW Gear types: SK 9092.1, SK 9096.1, SK 11407, and SK 12507 (ASHR / AZSHR) Torque: Up to 26,196 Nm (e.g., model SK 9096) Weight: Between approx. 2,400 kg and 4,500 kg per unit (A detailed stock list with all reference numbers and specifications is available as a PDF upon request.) Additional Information: Location: DABROWA GORNICZA, POLAND Inspection: Possible at any time by prior arrangement. Loading: Professional on-site loading by crane or forklift is ensured. Sale: Preferably as a complete package (special terms), individual purchase also possible. Price: Negotiable – please send us your offer or request our price list.

Year of construction: 2016, condition: used, functionality: fully functional, frame height: 4,000 mm, frame width: 6,000 mm, Overview: The eTuft (also marketed as Robotuft®) is an advanced robotic tufting machine designed for the production of fashion carpets, rugs, and custom artificial grass. It is suitable for single orders, series production, and sample creation. Manufactured by EFAB GmbH. Origin & Quality: All components are sourced, manufactured, and assembled in Germany. EFAB's production facility and development department are located near Düsseldorf. Manufactured by EFAB. Tufting Head Options: The machine features an innovative, interchangeable tufting gun mechanism: Pneumatic head – supports a significantly wider pile height range (cut pile up to 60 mm, J-tuft up to 100 mm), variable pile height for 3D effects, and various needle sizes (Ø 4.8 mm to Ø 11 mm). Switching between the two systems requires only loosening 6 screws—no electrical installation required. Main Features: - Laser pointer synchronized with the control system for precise head positioning - Camera on the tufting head for easy on-machine repairs - Wireless remote control allowing operation from various locations - Touchscreen monitor with Windows 10 and eHMI software (available in multiple languages) - Compatible with a wide range of yarns: wool, viscose, nylon, cotton, polyester, polypropylene, and blended fabrics Ledpfoyzbc Nox Am Noaa - Production capacity of 1–6 m²/hour depending on design complexity, with a maximum tufting speed of 2,000 stitches/minute (pneumatic)

Condition: like new (used), Year of construction: 2017, S&F Oscillating Screen | Screening Machine Type ASM-200 used (inspected) with inspected bearings (flange bearings) and inspected universal joints Manufacturer: S&F GmbH Type: ASM-200 Year of manufacture: 2017 Screening capacity: approx. 20 t/h (for wood pellets, depending on material) Fractions: 2 Screening area: 2.0 m² per screen mesh size Screening decks: 1 piece Mesh size of the screen: - 1. screening deck: punched perforated plate screen, D = 5 mm Drive power: 2.2 kW, 3 x 400 V, 50 Hz L x W x H: 3,200 x 1,800 x 1,450 mm Model: ECO Line Machine weight: approx. 1,300 kg Machine colour: RAL 3000 Flame Red incl. 1 piece Modular silo type M-300 / 45°, used L x W = 3,000 x 3,000 mm Total height: approx. 4,400 mm Outlet height: approx. 1,750 mm Volume: approx. 4.06 or 9.35 m³ Max. bulk density: approx. 900 kg/m³ Item no.: 406.4345 Incl. extension feet L = 1,100 mm Incl. hopper attachment and slide gate Ledpoy Aa Ugofx Am Nsaa Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Screening machine for wood chips

Condition: excellent (used), Year of construction: 2001, overall weight: 16,000 kg, - Building year 2001 - Infeed height 350 / 400mm - Infeed width 1.600mm Lasdpfsyzn S Dex Am Nsa - Rotor Ø 1.200 mm - motor 180 KW - Weight 16 to Possible drive power 160 - 400 KW Possible throughput up to 60 to/ h, with the right material and motor. Many parts are new as rotor bearings, infeed roller bearings, screen, hammer, anvil, etc. Optional: drive motor, electrical control, infeed shaker.

Year of construction: 2001, condition: excellent (used), - Building year 2001 - Infeed height 350 / 400mm - Infeed width 1.600mm - Rotor Ø 1.200 mm Laedeyzn H Ispfx Am Nsa - Weight 16 to Possible drive power 160 - 400 KW Possible throughput up to 60 to/ h, with the right material and motor. Many parts are new as rotor bearings, infeed roller bearings, screen, hammer, anvil, etc. Optional: drive motor, electrical control, infeed shaker.

Condition: new, Year of construction: 2025, overall weight: 9,700 kg, gear ratio: 42.642, Main gearbox FLENDER, H3SH size 19 i = 42.642 Output shaft diameter: 290 mm Drive shaft diameter: 110 mm Cooling by: CLP mineral oil VG 460 P2 = 420 kW n1 = 1,231 rpm n2 = 28.9 rpm T2 = 138,942 Nm Lsdpfxoyuddns Am Njaa Including: - Oil supply system OWGD - Piping - Main drive clutch RUPEX RWN 360 - Output clutch RUPEX RWN 1250 - Auxiliary gearbox B3 SH 04 - Auxiliary engine INNOMOTICS 1CV3182B 180 - Brake TE 200/220/50 - Drive coupling FLUDEX FADB 297x200 - Output clutch N-EUPEX A315 - Base frame for auxiliary drive

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, type of cooling: air, laser wavelength: 1,064 nm, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Laedpfx Amowlc Ste Nsa Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 Watt, 20 Watt or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus - EZCAD marking software in German / English (other software available on request) - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Year of construction: 2026, condition: new, functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, laser power: 20 W, laser wavelength: 1,064 nm, scan area length: 110 mm, scan area width: 110 mm, type of input current: AC, laser type: fiber laser, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge Laodjw Et Ilepfx Am Nsa - Fiber laser 20 Watt (Optional: 30 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with anti-trap protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Year of construction: 2026, condition: new, functionality: fully functional, The universal LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be created with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers once they have been set. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer it to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. The LAS 28 XLe laser model can optionally be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Other options, such as lateral cantilevers for marking long parts, movable Z-axis, drawer systems, etc., can also be implemented. Programmable, software-controlled axes (X-, Y-, Z-axis) and database connection are also possible. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm Ledpfx Aewkpvvsm Njaa - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: autofocus system - system for automatically determining the focus distance - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 120 Kg

Year of construction: 2026, condition: new, functionality: fully functional, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, can be realized. Made in Germany - Fiber laser 20W (Optional: 30W, 50W) - Wavelength 1064nm - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: Autofocus system - signal light for indication of operating status - marking software EZCAD (optional additional laser software) - Pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. part height approx. 270mm - electrically adjustable Z-axis (adjustment of working plane) - frame made of aluminum profile - connection 230V - air cooled - Laptop with Windows operating system - dimensions: 800x 600 x 1660mm (LxWxH) - weight: approx. 80 Kg Laedpfxsv Sybye Am Noa

Year of construction: 2026, operating hours: 1 h, condition: new, functionality: fully functional, overall weight: 560 kg, total length: 1,870 mm, total width: 1,040 mm, total height: 1,550 mm, compressed air connection: 6 bar, positioning accuracy: 0.01 mm, repeat accuracy: 0.01 mm, rotational speed (max.): 60,000 rpm, type of input current: three-phase, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality standards and guarantee the depaneling machine a long service life and high reliability. Made in Germany Semiautomatic depaneling - solutions on demand The LOW 4322 depanelling system enables fast product changeover while maintaining short depanelling and handling times. The insertion of the blank PCB is done with a parallel shuttle, pick-up and fixation with pin clamping technology and if necessary in combination with vacuum suction cups. This machine is equipped with: • a shank and disc tool separating module on Z-axis (automatically rotatable 0-90) • X-Y cross stitch module in linear motor technology with high resolution measuring system • 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors • Alu profil frame with two maintenance doors - left and right. Lodpfjxt Dmxjx Am Neaa • Standard vision system base module for teach-in programming (camera area 400 x 330 mm) • Working area is 420 x 330 mm • Automatic cutter length processing (only in combination with shank separation module) • Remote maintenance/support via remote connection (TeamViewer) or provided by the customer • Touch IPC with Windows operating system • Laser axis measurement incl. protocol • air ionization • Cutter breakage control for end mills only • Preparation for vacuum clamping technology • ESD window and sliding doors Optionally a vacuum cleaner unit can be offered later.

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, The subject of this offer is a compact Mini Rex Futura roll dividing and rounding machine, known for its high efficiency and wide weight range while maintaining excellent dough processing quality. MACHINE DESCRIPTION Mini Rex Futura roll divider-rounder, year 2011. Manual dough loading into the hopper 2-row operation Manual removal of products from the discharge belt Performance: 33 cycles/min; 3960 pcs/h Weight range: L: 25g – 75g; H: 70g – 140g Control panel Dough types: wheat, graham, yeast dough, donuts Single-operator control Machine dimensions (H x L x W): 1800 x 1770 x 650 mm Availability: Expected refurbishment completion: end of May this year. Sample photo of a similar machine after complete overhaul at Cream Serwis. Lodpfx Ajy Angqem Njaa Contact us for a price quotation and more details.

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, The subject of this offer is a used G2000 bun production line with a Mini Rex Futura divider-rounder from 2009. Designed for producing the following types of rolls: • Round stamped rolls • Elongated unstamped rolls • Sliced rolls • Twisted rolls Laodpfey And Njx Am Nea • Kaiser rolls • Hot dog rolls • Poznań rolls Product description: • Fully automatic and compact bun production line • Based on a rotary Mini Rex Futura divider-rounder from 2009 • 2-row operation • Manual removal of products from the discharge conveyor • Stamping station with easily interchangeable tools; includes Kaiser and Corinthian stamping heads • Integrated elongation and flattening unit • Weight range: - For stamped rolls: dough piece weight from 25g to 75g – output: 1,800 pcs/h to 2,640 pcs/h - For unstamped rolls: dough piece weight from 80g to 125g – output: 1,800 pcs/h to 3,960 pcs/h • Proofing time: approx. 6 minutes at an output of 2,000 pcs/h • Dough types: wheat, graham, yeast, doughnuts • Single-person operation The machine is currently undergoing a general overhaul, which is expected to be completed by mid-June 2026. The photos show a similar bun line after a complete overhaul at Cream Serwis. If you are interested in pricing or would like to receive more photos, please contact us.

Condition: new, Year of construction: 2025, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max Laodpfxsgu Nmhe Am Noa - maximum pipe weight 100KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older machine

Condition: new, Year of construction: 2025, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load Lodeg Dvdcspfx Am Noaa - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older bigger machine