Used Mikron Hpm 1350 for sale (1,052)

Condition: ready for operation (used), Year of construction: 2001, operating hours: 6,707 h, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 653 mm, controller manufacturer: SIEMENS, spindle speed (max.): 8,000 rpm, number of axes: 3, This 3-axis MIKRON VCE 750 was manufactured in 2001. It features a table size of 914 × 356 mm, with X-axis travel of 762 mm, Y-axis travel of 406 mm, and Z-axis travel of 653 mm. If you are looking to get high-quality milling capabilities, consider the MIKRON VCE 750 machine we have for sale. Contact us for further details regarding this machine. Rcedpfxeych Rne Amgsb • Table size: 914 × 356 mm

Condition: ready for operation (used), Year of construction: 1998, operating hours: 11,320 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle motor power: 15,000 W, tool weight: 13,000 g, number of axes: 3, This 3-axis MIKRON UM600 TNC 410/426 was manufactured in 1998. It features a maximum longitudinal movement of 600 mm, transverse movement of 500 mm, and vertical movement of 450 mm. The machine is equipped with a robust table size of 520 x 900 mm and a maximum table load capacity of 400 kg. If you are looking to get high-quality machining capabilities, consider the MIKRON UM600 TNC 410/426 vertical machining centre we have for sale. Contact us for further details. • Machining spindles (vertical and horizontal) • Drive power (44% duty cycle): 15 kW • Drive power (100% duty cycle): 6 kW • Motor torque: 50 Nm • Max. torque at spindle (44% duty cycle): 800 Nm • Number of gear stages: 4 • Max. tool diameter: 130 mm • Included options: in-machine measurement and fast spindle • Feed drives (AC) • Programmable feed rate X/Y: 0 – 15,000 mm/min • Programmable feed rate Z: 0 – 12,000 mm/min • Rapid traverse X/Y: 15,000 mm/min • Rapid traverse Z: 12,000 mm/min • Coolant system • Reservoir capacity: 150 l • Flow rate: approx. 20 l/min • Clamping table • Table size: 520 × 900 mm • Number of T-slots: 4 Rsdpfsy D Thvox Amgecb • T-slot width: 14 H7 • Tool changer TCD 44 • Tool positions: 22 • Tool diameter: 80 / 130 mm • Max. tool length: 350 mm • Max. tool weight of Tool changer TCD 44: 6 kg • Max. workpiece weight in drum magazine: 200 kg • Chip-to-chip time: 20–25 s • Tool change time: 12–16 s • Electrical connection • Total installed rated power: 15.8 kW • Useful/connected power: 12.3 kW • Operating voltage/frequency: 3 × 400 V / 50 Hz Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 1995, Heidenhain TNC 407 SK 40 Luft Wasser Kühlung Werkzeugwechsler 22 Plätze Verfahrwege 600x500x450 mm Spindeldrehzahlen 5-5000 U/min Rcjdpfx Ajgydn Ismgjb Vorschubgeschwindigkeit 0-10000 mm/min Antriebsleistung Hauptspindel 6 kW

Condition: used, Year of construction: 1996, Technical details: x-travel: 600 mm y-travel: 500 mm z-travel: 450 mm turning speeds: 5 - 5000 U/min quill stroke: 90 mm total power requirement: 9 kW feed range: 0-10.000 mm/min weight of the machine ca.: 3260 kg dimensions of the machine ca.: 2200x2800x2000 mm spindle: 6 kW Accerories vertical milling head SK 40 CNC universal milling machine (without toolchanger), Equipped with CNC-Heidenhain TNC 407 dwheel coolant device * Rcodpfx Aey A Rmgsmgob

Condition: used, condition Defekt/Ersatzteilträger manufacture Mikron type HSM 400 U The machine is defective and is being sold for spare parts. Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Rjdeyzt A Uspfx Amgocb Prior sale is reserved.

Year of construction: 1990, condition: excellent (used), Mikron WF2S tool milling machine with 3-axis Elesta-Visulesta digital display. Rigid angle table , SK 40 spindle mount. Very good working condition , from institute. Machine ready for demonstration under power by arrangement. Rcedpfjg Nw Rzsx Amgjb

Year of construction: 1987, condition: good (used), Mikron WF2SA tool milling machine with 3-axis Heidenhain active digital readout. Fixed angle table, SK 40 spindle holder. Ready for operation . Machine ready for demonstration under power by arrangement. Rodpfxjqttt To Amgecb

Condition: used, Year of construction: 1991, x-travel 500 mm Rsdpfx Ajyxr Hmomgscb y-travel 500 mm z-travel 400 mm table-size 900 x 530 mm control Heidenhain TNC 355 tool adaptor ISO 40 | | turning speed range 40- 4000 U/min rapid speed 5 / 6 m/min feed speeds 2 - 3000 | mm/min | power requirement 6 kW table load 350 kg dimensions 2,6 x 1,8 x 2,2 m weight 2,6 t Univers. milling machine 3 axis - external electric handweel - housing - universal head

Condition: good (used), Year of construction: 1992, Mikron WF 3 DPM Tool Milling Machine Mikron WF 3 DPM with Heidenhain TNC 135 Control, Year 1988, Overhauled in 2014, Excellent CONDITION Technical Data: - Year of manufacture: 1988 / 2014 - Fixed angle table - Spindle speed: 31.5 to 3150 rpm - Stepless feed in 3 axes: 0 to 2000 mm/min Rsdpfxjyxc Uno Amgocb - Travel paths X/Y/Z: 500/500/400 mm - Rapid traverse x/y/z: 3 m/min - Table size: 800 x 450 mm - Table load capacity: 250 kg - Vertical quill stroke: 90 mm - Vertical and horizontal quill – SK40 - Hydraulic clamping system - Weight approx. 1950 kg - Space requirement approx.: 2.3 x 2 x 2 m - Drive power: 12 KVA Accessories and Equipment: - Heidenhain TNC 135 control - Hydraulic clamping vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts lists, control system manual, and programming examples - Handwheels - Coolant system About the machine: A Mikron WF 3 DPM tool milling machine with Heidenhain TNC 135 control is being offered. This universal milling machine is in excellent original condition. It comes from a workshop where it was used only occasionally for prototyping. The control system is very user-friendly. In addition, the machine features hydraulic clamping both vertically and horizontally. Converting from vertical to horizontal operation is very easy thanks to the swing-away vertical head. The guides are lubricated regularly via central lubrication. The Mikron has been mechanically and electrically tested by us. Take the opportunity to inspect and test the Mikron under power at our facility. You can find more milling machines from well-known manufacturers on our website.

Condition: good (used), MIKRON UCP 600 VARIO is a 5‑axis machining center engineered for high precision, accuracy and reliability in complex machining. Table 320×320 mm; travels X600 Y450 Z450; indexing C n x360°; head B -115/+30°. 30‑station tool magazine; tool Ø max 80 mm, length 200 mm, weight 8 kg; spindle nose HSK‑A63. Spindle stepless 0–20,000 rpm, 30 kW, 91 Nm torque. Feed 15,000 mm/min, rapid 22 m/min; power 3x400 V 50 Hz. Machine weight ~7,700 kg; dims L6820×W4800×H2540(2810) mm. Options: paper filtration, water cooler, chip conveyor, EROWA UPC table, electronic handwheel, lamp, status light. 4+5 axis revised 2023. Achieves tight tolerances; suited to automotive, aerospace, medical, watchmaking and machine‑tool sectors. Rcjdpfoyxn Nkox Amgsb

Condition: good (used), Year of construction: 1972, max. wheel diameter 80 mm gear width 60 mm max. module 3 min. module 0,1 total power requirement 0,4 kW weight of the machine ca. 120 kg dimensions of the machine ca. 0,6x0,6x0,75 m Rsdpfx Amjw N S D Sogscb

Condition: used, max. wheel diameter 40 mm gear width 45 mm max. module 1 clamping length max. 75 mm number of teeth 5 - 399 hob turning speeds 320 - 3200 U/min Rjdpfx Asyh Rmgomgscb weight of the machine ca. 0,6 t Fully Automatic Gear Hobber with Loader for small gears

Condition: good (used), Year of construction: 2001, Parts shown by hand not come. Rodpfxjuxrv Hj Amgjcb Technical data shown on pictures.

Condition: good (used), MAchine come with toolholders. Rcodpfx Aevk Ng Aemgjb

Condition: good (used), Year of construction: 2007, Machine is in good condition, Parts shown by hand not come. SK 40, 24 tool places in tool changer. Rjdpswk Nm Iefx Amgecb 10.000 rpm

Condition: good (used), Parts on table not come. Marked with red. Rcsdpfxewxdyxe Amgeb

Condition: repair required (used), Year of construction: 2003, Parts shown by hand not come. Rcedpsm Dtnrsfx Amgob Pallete changer EROWA not come.

Condition: good (used), Year of construction: 1999, Machine is in good condition. X 750 mm Y 400 mm Rodpfx Amswx Rafogecb Z 500 mm 10.000 rpm

Condition: good (used), Year of construction: 2000, 20000 rpm, tool measurement on table will come, Rcodpfx Ajr Urm Somgsb Parts shown by hand not come.

Condition: good (used), Year of construction: 1991, weight of the machine ca. ca. 6 t The design of the basic machine is characterised by the following features: - horizontal position of the workpiece spindle; vertical position of the milling spindle or milling head of the milling head - The workpiece is held between the workpiece headstock (left) and the tailstock (right). Redpfx Aeub Amfomgjcb - the radial slide is mounted on the base (X-axis) - the axial slide moves on the radial slide (Z-axis) - the shift milling head is equipped with an automatic angle adjustment (A-axis); the shift slide (Y-axis) moves diagonally to the workpiece diameter - CNC controlled - IBH control - loading device - Many accessories Technical data: - largest milling module with hobs according to DIN 8002: 4.5 mm - largest milling module for high-performance milling: 3.0 mm - Number of teeth: 2 - 999 - max. workpiece diameter for manual loading: 200 mm - max. workpiece diameter for automatic loading: 150 mm - maximum workpiece length: 400 mm - largest / smallest milling cutter diameter: 102/40 mm - maximum cutter length: 230 mm - largest / smallest milling arbor diameter (standard): 32/16 mm - Axial slide path = largest milling length Z-axis: 300 mm - Radial slide path X-axis: 140 mm - Milling cutter shift path Y-axis: 100 mm - Milling stock path W-axis: 420 mm - Swivelling angle of shift milling head (left/right) A-axis: 50°/60° Milling coordinates: - Z-axis: 100 - 400 mm - X-axis: 1ß0 - 150 mm - Y-axis (end face of milling spindle): 50 - 230 mm - W-axis (face of tailstock spindle): 165 - 585 mm - Milling cutter speed range standard B-axis: 0 - 1500 rpm - Workpiece speed C-axis: 0 - 350 rpm Feed speeds: - X-axis: 3500 mm/min - Z-axis: 3500 mm/min - Y-axis: 4000 mm/min - W-axis: 5500 mm/min - V-axis (gantry loader): 80000 mm/min

Year of construction: 1987, condition: used, machine/vehicle number: 152.41.74.002, table mounting size: 500 x 1000 mm movement x: 630 mm movement y: 500 mm movement z: 460 mm tailstock stroke: von Hand 45 mm spindle taper: ISA 40 spindle turning speed range: 31,5 - 3150 rpm carriages continuously adjustable: 1 - 3000 mm/min rapid move: x/y 6 / z 4 m/min electrical connection: 380 V, 6/8 kW space needed: 1800 x 2120/2600 x 2020 mm Rcsdpe H I Hdefx Amgob weight: 3100 kg control: HEIDENHAIN, TNC 155

Condition: good (used), Year of construction: 2012, Traverse X Y Z; 1020 x 560 x 600mm, table size 1000 x 560mm, table load 1350kgs, spindle speed 16000 rpm, spindle motor 12Kw, rapid federate 40m/min, 24 station ATC, spindle taper BT40, Heidenhain TNC 530I, Rcsdpfxoypb Dze Amgjb swarf conveyor.

Condition: excellent (used), Year of construction: 1987, Travel X/Y/Z 600/600/460 mm, 21 speeds 31,5 - 3150 rpm, motor 4,0 KW, spindle ISO 40, control Heidenhain TNC 150, table size 900x550 mm, hydraulic tool clamping, coolant device, spash guard, rapid feed, horizontal milling device, tilting turning table, clamping set, machine feet, manual, TOP condition Rcsdopcf D Iepfx Amgjb

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, 1 x used milling machine Mikron UME 600 Year of manufacture: 1995 Control: TNC 407 X travel: 600 mm Y travel: 500 mm Z travel: 450 mm Speeds: 5 - 5000 rpm Rsdpfxeyvh U Uj Amgecb Quill stroke: 90 mm Total power requirement: 9 kW Feed range: 0-10,000 mm/min Machine weight approx.: 3260 kg Machine dimensions approx.: 2200x2800x2000 mm Spindle: 6 kW Vertical milling head: SK 40 No internal coolant (WW)

Condition: used, x-travel 400 mm y-travel 400 mm z-travel 400 mm Control Heidenhain turning speeds 3150 U/min table surface area 700x350 mm Table load 400 kg Rodpfx Ajyutv Hemgocb spindle taper ISO 40 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team