Used Monforts Knc 5 1000 for sale (63,732)

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 538/04, turning diameter over cross slide: 300 mm, turning length: 600 mm, spindle bore: 52 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 50 rpm, quill stroke: 90 mm, torque: 240 Nm, overall weight: 7,000 kg, swing diameter over bed slide: 440 mm, Equipment: documentation/manual, Well-maintained Monforts RNC 500, can be inspected under power. Fanuc 18 i TB control 12 driven tool stations with VDI 40 mount Counter-spindle collet 173 E Main spindle Kitagawa 3-jaw chuck BB 208 Dsdpfx Adoyrbmhs Nskl Hydrostatic circular guideway FAPT programming system Main and counter spindle Chip conveyor Coolant system with flat bed filter Parts catcher with transfer device Ejector in counter spindle Short bar loader Samsys Multi 3000 Reduction tubes Rinse gun C-axis Y-axis Further machine equipment – see photos

Condition: ready for operation (used), Year of construction: 2013, Nominal width: 3000mm, Working width range: 600mm-2800mm, Layers: 1, Number of chambers: 6, Heating system: Gas, Air supply: top/bottom, Max. working speed: 100m/min, Chain arrangement: horizontal, Cooling cylinders: 2, Padder: twin cylinder Matex 6000, Exhaust fan: 1, Documentation available, On site inspection is possible. Djdpfx Adoyhqb Te Nekl

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Monforts RNC 500 MultiTurn, year of manufacture 2007 The machine was last serviced by Monforts Werkzeugmaschinen GmbH in July 2025 and is in excellent condition. Dodpfx Adsxcwdvo Njkl All tools and accessories are included. Inspection possible by appointment.

Year of construction: 2014, condition: new, Approx. 30 meters of tire rack in stock 2m, 3,35m, 4 m high in stock. Completely new racking system from a large German manufacturer. Load plates documents etc. are self-evident. Frame blue RAL 5010, infill and base plates galvanized. Frame available pre-assembled from 2 m to 7 m height Supports orange, RAL 2004 beam length: 3,6 m, 1.000 kg shelf load 3 levels per bay . Negotiable price: € 2.070,00 net ex stock Offer consists of: 9 pcs. frame pre-assembled, depth 50 cm, height 3,36 m 48 pcs. support, length 3,6 m, 1000 kg load / compartment 96 pcs. safety catches 18 pcs. concrete anchor Goods are in stock. Transport and assembly possible on request. Other compositions on request. Beam lengths of 1.80, 2.70 and 3.60 m available. Constantly over 3000 running meters of pallet racks from numerous manufacturers in stock Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our AGB, all prices excl. VAT ex stock Purchase / Sale We look for, and/or offer constantly numerous articles from most diverse ranges broom-clean business evacuations Dksdpfx Adsb H Scyj Njl company dissolutions Fast- flexible - ready to hit the ground! We also clear for liquidators. Write us with some keywords, we will contact you immediately.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, clamping force: 9,806 kN, screw diameter: 105 mm, displacement volume: 4,160 cm³, opening stroke: 1,100 mm, No reserve price – guaranteed sale to the highest bidder! Engel injection moulding machine with Engel ERC 83/2 - CL robot! TECHNICAL DETAILS Clamping force: 1,000 tons Screw diameter: 105 mm Injection volume: 4,160 cm³ Locking force: 1,100 tons Opening stroke: 1,100 mm Tie bar spacing: 1,400 x 1,150 mm MACHINE DETAILS Dkedpsy Ew Aaefx Ad Njl Number of heating zones: 7 Pump drive power: 130 kW Machine weight: 64 t + 18 t EQUIPMENT Engel ERC 83/2 - CL robot Separate control cabinet Note: For the purchase of multiple items from the same location (see offers below), you will benefit from reduced costs for dismantling and loading.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, clamping force: 1,000 kN, injection weight: 15 g, ejector force: 66,000 N, ejector stroke: 225 mm, plate length: 795 mm, No reserve price – guaranteed sale to the highest bidder! Auction of a 3-color injection molding machine! TECHNICAL DETAILS Clamping force: 1,000 kN Tie bar spacing: 420 x 420 mm Mounting platens: 795 x 795 mm Mold height: 300 mm Maximum platen distance: 950 mm Ejector stroke: 225 mm Ejector force: 66 kN Dkedjy Hki Ajpfx Ad Nel Injection Unit 1 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 2 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 3 (60 series) Screw diameter: 15 mm (high abrasion resistant) Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,080 bar MACHINE DETAILS Control system: Selogica Clamping unit: hydraulic Operating hours: 21,200 h FEATURES 1 vertical injection unit, mounted on supports for the 2nd injection unit instead of on the clamping unit tie bars, manually operated, working position adjustable between 70 and 250 mm 2 x core pull Open nozzle 15 mm wear-resistant, without heating band (1st injection unit 150) Technology level 2 – servo-regulated hydraulic system with two variable displacement pumps Technology level 3 hydraulic system with three variable displacement pumps for simultaneous movements Heating band for open nozzle Injection unit 150 for vertical injection into the mold parting line for 2-component processing Position-regulated screw with control valve on the injection unit, including regulated back pressure Position-regulated screw with control valve for multi-component machines – for injection unit 2 Injection unit 60 for horizontal injection into the mold parting line as the 3rd injection unit For VE 906/00, injection unit 60 in L-position: unit lowered by 70 mm Plasticizing cylinder assembly 15 mm (without nozzle), with advanced feed and pressure reducing valve Open nozzle 15 mm wear-resistant, without heating band (L-position) Nozzle tip with radius 15 (L-position) Heating band for open nozzle (L-position) Position-regulated screw for the third injection unit Documentation/manual

Condition: used, Year of construction: 2001, 2001 Kellenberger CNC Grinder KEL-VARIA RS175/1000 Dkedpfxjywftds Ad Nsl

Condition: ready for operation (used), Year of construction: 1989, Immediately available from training center: Universal Milling Machine Horizontal - Vertical WMW Auerbach Dksdpfx Adsy N Aa Ee Njl Type FW 250 x 1000 / 2 Year of manufacture: 1989 Table: 1250 x 250 mm Table load capacity: 1250 kg Travel X/Y/Z: 700 / 400 / 500 mm Heidenhain 3-axis digital readout SK 40 Spindle speeds: 55 – 2800 rpm Feeds: 10 – 630 mm/min, stepless Vertical head Horizontal milling device Drive power: 6.3 kW Weight: 2.5 t Offered at EUR 2,000 – plus VAT, ex location

Condition: ready for operation (used), Heidenhain / Indramat ROD 1424.039B/1000 rotary encoder. 297 252-02, serial number 14433376B, used, in good condition, 100% functional, delivery as per photos. Dkjdpfx Adjy Nqbwe Nsl

Condition: new, Storage platform on request! Load capacity 250 - 1000 kg/sqm Why storage platforms from BLT Lagertechnik? - We are a family business: Long-term partnership is our goal. - We are the specialist: We realize all spans, loads and degrees of complexity. - We care: Our cold-formed system is the most sustainable solution there is. Dkedpfx Ajy Izhred Nsl Included in the scope of delivery : - Supports - main beams - secondary beams - floor covering - Assembly material and assembly/installation instructions Optional on request : - collision protection - railing - Transfer station - Stairs - ground anchor - Steel construction can be coated in any RAL color. (standard RAL7016) Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 260 mm, travel distance Z-axis: 1,020 mm, controller manufacturer: OKUMA, number of axes: 4, This 4-axis Okuma LU15 M-2SC 1000 was manufactured in 1998. It features two tool turrets, live tooling with C-axis capabilities, and synchronous tapping for enhanced productivity. The machine includes an integrated tool setter for precise measurements and a programmable tailstock for versatility. If you are looking to get high-quality turning capabilities, consider the Okuma LU15 M-2SC 1000 horizontal turning machine we have for sale. Contact us for further details. • Longitudinal Travel (X): 1020 / 995 mm • Cross Travel (Z): 260 / 140 mm • Turning Range: 340 mm • Swing Diameter over Bed Cover: 530 mm • Swing Diameter over Cross Slide: 380 mm • Spindle Nose: ASA-A2 / DIN 55026 Gr. 6 • Spindle Bore: 62 mm • Spindle Diameter in Front Bearing: 100 mm • Chuck Diameter: 200 mm • Main Drive: Motor spindle (hollow shaft motor) frequency-regulated 60% ED Dkodpfxsy Nmi Dj Ad Nol • Power (Main Drive): 22 kW • Max Torque: 412 Nm • Speed Range: 45 - 4,500 rpm • Speed Levels (Electrical): 2 • Feed Drive: AC servo motors, digitally regulated • Feed Range X/Z: 0 - 1,000 mm/U • Rapid Traverse X/Z: 15 / 20 m/min • Power X, Z: 2.4/1.5 kW and 4/4 kW • Feed Force X, Z: 11/3.7 kN and 7/6.7 kN • Turrets: 2 tool turrets • Live tooling: Yes (C-axis and driven units) • Tapping: Synchronous tapping • Spindle interpolation: Automatic main spindle interpolation • Tool monitoring: Wear and breakage monitoring • Tool measurement: Integrated tool setter / measuring device • Tailstock: Programmable, towable with bed slide, automatic clamping • Tailstock quill: Controllable via M-command • Draw tube bore: 55 mm (partial hollow clamping cylinder) • Interface: DNC Interface RS-232C • Cooling system: Reinforced pump (8 bar at 30 l/min) • Programming: ONE TOUCH Dialog-NC (automatic work plan generation) Additional equipment • Chip conveyor (1,200 mm discharge height) Technical Specification Counter Spindle No Driven Tools Yes

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 310 mm, spindle bore: 80 mm, turning diameter over bed slide: 500 mm, center height: 250 mm, center width: 1,000 mm, quill diameter: 75 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 9 rpm, quill mount: MK 5, Equipment: rotational speed infinitely variable, incl. RÖHM lathe chuck incl. 3-axis position display incl. quick-change tool holder 'Set', Multifix system for further information, see data sheet Dkedpey Izausfx Ad Nel ELMAG warranty: 3 years (with online registration after purchase) NOT THE RIGHT MACHINE? We are official ELMAG partners and can offer you the entire range of ELMAG products! Request a quote!

Year of construction: 2008, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 346100, Machine SAR-1000-B-015 including accessories: ULT ASD 300 Ex extraction unit. The operating manual can be provided as a PDF. The machine is currently in the condition shown in the pictures. It can be placed on pallets for collection if required. The machine has been inspected by Schunk, who determined that the following spare parts are needed: - Z-axis - Bearings for Y1 and Y2 axes - Replacement of power cable, Hall sensor cable, and pneumatic hoses - X-axis brake Dedpfx Ajxwvrued Njkl - Extraction nozzle and extraction hose - Shuttle sensor (B4.3/E) - Tool holders (5 pieces) - Replacement of UPS - Hold-down brush - Bulb for signal lamp - Hold-down sealing ring, pneumatic cylinder, guide shaft and plain bearing bush, spindle retaining plate - External exhaust hose ULT - Table lift cylinder (?) According to Schunk, material requirements are approx. €16,000. As we are selling the machine as defective/in need of repair and have listed all known deficiencies, the item is sold under exclusion of any warranty or liability for material defects.

Condition: good (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 31.211.014, center height: 225 mm, grinding length: 1,000 mm, grinding wheel diameter: 400 mm, grinding diameter: 500 mm, workpiece diameter between centers: 500 mm, Kellenberger UR 175x1000 CNC Kelco 70, fully functional Upgrade from 175 to 225 Machine no. 31.211.014 Year of manufacture: 1987 Prepared for internal grinding device Ball screw X-axis replaced in 2017 Axis card Z-axis replaced in 2021 Tailstock bearing renewed in 2017 Monitor renewed in 2023 Accessories: 1x grinding wheel flange left 1x grinding wheel flange right 1x centre support 1x workpiece magnet 1x paper band filter Djdeyyur Iepfx Ad Nekl Further accessories on request No warranty, guarantee or return Available immediately, ex location Transport can be organised if required

Condition: excellent (used), Year of construction: 2012, operating hours: 15,700 h, functionality: fully functional, punching force: 16 t, total height: 2,155 mm, total width: 4,130 mm, total length: 5,840 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, working range: 1,250 mm, type of input current: three-phase, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,250 mm, workpiece weight (max.): 150 kg, overall weight: 8,000 kg, space requirement width: 4,130 mm, space requirement length: 5,840 mm, feed length X-axis: 1,250 mm, feed length Y-axis: 1,250 mm, Equipment: safety light barrier, For sale: 1x TruPunch 1000 Compact Edition (1250 mm x 1250 mm) - Only 15,700 operating hours! - Brush table - Year of manufacture: 2012 - 10 tool stations, 2 clamps - Control system based on Bosch CML45 with 15" TFT color display - Dual-beam light barriers The machine was purchased directly from Trumpf in 2015. It was originally a 2012 demonstration machine, previously used in Trumpf’s training workshop (very low hours there). Subsequently, it was operated in our facility in single-shift production for manufacturing welding equipment enclosures, which accounts for the low total of only 15,700 operating hours. It has been used exclusively for light sheet metal, primarily mild steel sheets of 1.25 mm and 2.0 mm thickness, and occasionally 3 mm. No heavier materials processed. No known defects; the machine is still in use and will be available from May 2026. Reason for sale: discontinuation of production. The “Compact Edition” of the TP1000 is optimized for part sizes up to 1250x1250 mm. Larger formats are possible using the “repositioning” function, which requires additional tables. The standout advantage of the “Compact” design is its minimal footprint of just 4.13 x 5.84 m. The machine is equipped with almost every available option: - MultiShear function - Thread forming function - Marking/Fast Beading function - Deburring and rolling technology - Part chute sensor Asking price for the machine: €42,000 plus VAT. Excludes accessories, price ex-works, loading and transport at buyer’s cost. Machine available from May 2026. Optional programming and accessories: - Fully configured workstation (PC) with installed software. Only needs to be connected to the network and is immediately ready for use (saves significant time & money). “TruTops Punch” accessible via network - 10 RTC cassettes - 2 MultiTools with 5 tools each (ideal for this machine!) - Various tools (including 2 x louver tools, round, rectangular, and slitting tools) - Tool adjustment aid Dkodpfx Adsy Iv I To Nol Asking price for accessories: €3,000 plus VAT.

Condition: used, Year of construction: 2001, Manufacturer: SCHULER SMG, Model: HZPU-T 1000-2500/2100, Year: 2001, Serial No.: 7.5592, Press force: 1,000 t, Die change table 2,500 x 2,100 mm, Ram surface 2,500 x 2,100 mm, Max. ram stroke: 1,300 mm, Table draw cushion force: 30–200 t, Draw cushion stroke: 300 mm, Press control with Siemens Simatic OP 37 HMI, Control and switch cabinets. Dodpfx Adjx Ry Nts Njkl +++ Attention: Machine is part of an online auction! +++

Condition: excellent (used), RS-Simulatoren Temperature Shock Chamber ST2K 1000 / 55 The system was regularly serviced and maintained by the manufacturer until it was decommissioned. Equipment Data Manufacturer: RS-Simulatoren Model: ST2K 1000 / 55 Design: Temperature shock chamber Cooling: Water-cooled Description Used temperature shock chamber for standard-compliant thermal shock testing. Suitable for material, component, and reliability testing. Used in industry, automotive, research, and quality assurance. System Description • 2 separate temperature chambers (hot/cold) • Automatic horizontal transfer of test basket • Rapid switch operation for temperature shock testing Temperature Ranges Hot chamber: +40 °C to +180 °C Cold chamber: -70 °C to +100 °C Time deviation: ±0.8 K Test Chamber Volume: approx. 580 liters Internal dimensions (W x H x D): approx. 1070 x 680 x 800 mm Max. load: approx. 150 kg Power Supply 400 V / 3~ / N / PE / 50 Hz Power: max. 33 kVA Current draw: max. 65 A Media Connections Cooling water: G 1", approx. 3 bar (max. 10 bar) Cooling water consumption: max. 3.2 m³/h Cooling water return: zero pressure Compressed air: NW 7.2, 4–10.5 bar Dimensions External (W x H x D): approx. 2800 x 2400 x 2200 mm Weight approx. 2800 kg Equipment Features • Horizontal basket movement • C-rails in test chamber • Large test basket (>1000 mm) • Observation window • Interior lighting • SE-604 controller • Program operation and data logging • RS232 interface Refrigeration System Refrigerants: R449A / R23 R449A: approx. 8.0 kg R23: approx. 2.5 kg Operating Data Operating hours: approx. 4,500 hrs Sound level: approx. 67 dB(A) Ambient Conditions Temperature: +12 °C to +30 °C Humidity: 25 % to 75 % rH Scope of Delivery RS-Simulatoren Temperature Shock Chamber ST2K 1000 / 55 Scope of delivery as shown Optional service before delivery: • Function test • Refrigerant service Dedpfjy H Igfsx Ad Nekl • Leak test • Trial run with protocol Condition Used. Condition as shown in the pictures. Note Used equipment, sold without warranty. Inspection possible by appointment. Loading and transport can be organized upon request. Subject to change and prior sale. If you have any questions, please feel free to contact us.

Condition: like new (used), Year of construction: 2018, operating hours: 11,010 h, functionality: fully functional, machine/vehicle number: 0696, travel distance X-axis: 900 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller model: Heidenhain, table load: 400 kg, rotary table diameter: 520 mm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 11,010 h, spindle motor power: 35 W, input voltage: 230 V, KOVOSVIT MAS MCV 1000 5AX (S) CNC Machining Centre We are selling the machine as we need to free up space in the factory. Vertical 5-axis simultaneous machining centre. Dkedpfx Adjyt Nw Rs Njl High precision for complex parts and 3D machining. Tilting/rotary table enables complete machining in a single setup. High-speed spindle for efficient production. Heidenhain CNC control, ideal for precision work.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 40 h, Guillotine shear with a maximum of 40 operating hours, Cutting capacity: 3.5 mm sheet thickness, tensile strength 200 N, Cutting capacity: 2.5 mm sheet thickness, tensile strength 400 N, Cutting capacity: 1.65 mm sheet thickness, tensile strength 600 N (V2A), Used only for 1.5 mm coated sheets, Hold-down opening: 25 mm (can be reset to factory spec), Strokes per minute: 56, Light barrier, Cutting angle: 2.4°, Upper blade has a 60° pointed grind for use with plastic-coated sheets. The upper blade is non-reversible. Rated power: 4.0 kVA Weight: 860 kg. Dedoxal Uwjpfx Ad Njkl

Condition: used, Multiple knife mill / granulator with rotor with 16 knives 6 stator knives Dsdpfxjy Icdzj Ad Nokl Drive 90 kW With equipment

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Equipment: documentation/manual, Straight driven tools – 2 pcs Angle, 90°, driven tools – 3 pcs + all tool holders visible in the photo. Djdpfey I I Ncox Ad Njkl

Condition: ready for operation (used), Year of construction: 2007, operating hours: 17,000 h, spindle speed (max.): 4,000 rpm, total height: 4,215 mm, overall weight: 32,000 kg, table width: 1,050 mm, table length: 4,500 mm, travel distance X-axis: 4,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 2,000 mm, controller manufacturer: HEIDENHAIN, controller model: 530, product length (max.): 12,635 mm, table load: 13,000 kg, number of axes: 3, This 3-axis KIHEUNG KNC-U1000 was manufactured in 2007. It features a spindle speed of 4000 rpm and an ISO50 taper. The machine is equipped with a 40-tool automatic tool changer and coolant through the spindle for enhanced efficiency. If you are looking to get high-quality machining capabilities, consider the KIHEUNG KNC-U1000 ed type milling machine we have for sale. Contact us for further details. • 2.5° head • Coolant through spindle • 40 tools in ATC Dodpsymmxfsfx Ad Nokl Technical Specification Taper Size ISO 50

Condition: refurbished (used), Year of construction: 2021, operating hours: 850 h, functionality: fully functional, In addition to the machines mentioned and shown, we have many other machines and accessories (blasting systems, conveyors, and small machines) available from stock. The machines can be purchased or rented. Contact us for (free) advice on vibratory finishing, drum & blasting technology. Dsdpswfdbcsfx Ad Nokl

Condition: used, functionality: fully functional, Year of construction: 2019, overall weight: 115 kg, total length: 2,350 mm, load capacity: 1,750 kg, fork length: 1,350 mm, fork width: 70 mm, empty load weight: 115 kg, working range: 2,350 mm, Telescopic fork tines Load center: 600 mm Dodpfxjy E Uxfs Ad Nekl ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Description: Good operating condition, as returned from the previous owner Load capacity: 1,750 kg / 600 mm, 600 kg / 1,750 mm Fork length: 1,350 mm - 2,350 mm Mounting surface: 1,200 mm

Condition: reconditioned (used), Year of construction: 2002, Multicomponent Arburg IMM (Horizontal & Vertical) Clamping force 100 tons. Year 2002. Machine will be delivered RE-Conditioned (full checked tested and operate) Ask us for our service of Start Up with Warranty of working condition. Dkedpfsp Audqex Ad Nel Technical details CLAMPING FORCE 1000 kN SCREW DIAMETER Horizontal bimetalic 25mm SCREW DIAMETER Vertical 18mm INJECTION PRESSURE 2500 BAR INJECTION VOLUMEN horizontal 54gr INJECTION VOLUMEN Vertical 20gr DISTANCE BETWEEN TIE BARS (h x v) 420x420mm MIN. MOULD HIGHT 250mm DAYLIGHT MAX 750mm WORKING HOURS 79.115 YEAR OF BUILDING 2002