Used Mrp Ub4 for sale (64)

Condition: good (used), Switches, pushbuttons Iedsb A Igaopfx Anwjic -Type: 800MR PA16 -Max.: 300 VAC Price: per piece -Number: 23x Available -Weight: 0.15 kg

Condition: good (used), geared motor, electric motor -Engine comes from a Gansow scrubber-dryer -Connection: 24 volts -Speed: 180 rpm -Power: 0.25 kW -Protection class: IP 20 -Quantity: 5 available -Price: per piece Iiedpfxjdwdrko Anwec -Dimensions: 270/130/H190 mm -Weight: 7.1 kg

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), Hydraulic cylinder: 480 mm -Type: E030ZM50479 S 49 -Piston rod: Ø 30 mm -Hole. Ø 20 mm -Number: 3x cylinders available -Price: per piece -Dimensions: 605/100/H80 mm -Weight: 6.8 kg/piece Iedpfx Anjvt Silowoic

Condition: new, plate thickness 1,2 mm roll diameter 62 mm throat 100 mm total power requirement 0,75 kW weight of the machine ca. 130 kg dimensions of the machine ca. 1,1 x 0,5 x 1,3 m Iisdpfxofv H Eds Anwoc Flanging machine is equipped with: - Emergency switch - Footswitch - 7 pcs. Roll sets

Condition: good (used), input voltage: 400 V, type of input current: three-phase, MRPX418, reinforced bottom slide. Complete with motor, tools for bowl, cyclone, foundation plate and vibration damping feet Iedpfxoucq N Dj Anwsic

Condition: reconditioned (used), input voltage: 400 V, type of input current: three-phase, Alfa laval HMRPX614 separator reconditioned complete with engine Cyclone Foundation plate Isdpoucq Rzsfx Anweic Vibration damping feet Tools for bowl Compression tool for bowl

Condition: used, Year of construction: 2023, Equipment: compressed air brake, 2 dosing rollers 4 scraper floor chains Pick-up feeler roller Carriage center Loadsensing / control line BG2 Loadsensing BG4 2-stage scraper floor motor Working lights / 3 x LED Side swing-out blade frame Access door to the loading area ISO / BUS operation Isdpjtlq E Sjfx Anwsic

Condition: used, Year of construction: 2023, 3 dosing rollers Scraper floor gearbox protection 4 scraper floor chains Pick-up feeler roller / in the middle of the wagon Loadsensing control cable BG2 Loadsensing BG4 Working lights / 3 x LED Swing-out blade frame on the side Access door to the loading area ISO BUS / operating system Iedpfx Anjt Dxm Uswoic

Condition: new, plate thickness 2,5 mm roll diameter 98 mm throat 160 mm total power requirement 1,5 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 550x1400x1500 m Delivered with: • hydraulic version • 4 set of wheels Iiodpsd Iimzofx Anwec • Foot control • Brake motor • Emergency stop

Condition: new, plate thickness 2,5 mm roll diameter 98 mm throat 160 mm total power requirement 1,5 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 550x1400x1500 m Iisdpfefv H Ehsx Anwec Delivered with: • manual version • 4 set of wheels • Foot control • Brake motor • Emergency stop

Condition: like new (used), Year of construction: 2024, functionality: fully functional, grinding length: 1,650 mm, grinding diameter: 400 mm, We offer a new BUB40 x 1500 NC machine equipped with a MITSHUBISHI NC controller. The machine is still under lease with ING Lease. It has been thoroughly refurbished based on the TOS HOSTIVAR BUB 40 model by FAS GŁOWNO. Technical data: Iisdpewzkywsfx Anwec • Maximum workpiece diameter: 400mm • Maximum workpiece length: 1500mm • Centre height: 200mm • Distance between centres: 1500mm • Minimum grindable workpiece diameter with a 380 mm grinding wheel: 20mm • Tailstock quill stroke: 40mm • Maximum tailstock clamping force: 4000N • Spindle headstock centre taper: ISO 296-1991/Morse 5 • Tailstock centre taper: ISO 296-1991/Morse 5 • Maximum workpiece weight between centres: 500kg • Maximum workpiece weight in chuck (including chuck): 100kg • Machine width (with enclosure): 6650mm • Machine depth (with enclosure, without control panel): 2400mm • Machine height (with enclosure): 1850mm • Machine weight: 7000kg • Total power requirement: 38kVA Grinding spindle: • Standard grinding wheel dimensions: 500 x 80 x 203.2mm • Grinding spindle drive motor power: 11kW • Grinding spindle rated speeds (for 430 mm / for >430 mm and 500 mm wheels): 2000 / 1744 rpm • Grinding headstock traverse servo motor power: 2kW • Grinding headstock traverse servo motor torque: 9.5Nm • Maximum continuous X-axis traverse speed: 2m/min • Minimum X-axis grinding wheel increment: 0.001mm • Maximum continuous X-axis traverse speed: 6m/min • Minimum X-axis grinding wheel increment: 0.001mm • Maximum grinding wheel increment in INC mode: 0.1 mm • Table traverse servo motor power: 3.5 kW • Table traverse servo motor torque: 16.7 Nm Workpiece spindle: • Workpiece spindle speed range: 1 – 150 rpm • Workpiece spindle servo motor power: 3.5kW • Workpiece spindle servo motor torque: 16.7Nm More information available upon request via email or phone.

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, controller manufacturer: MicroStep, controller model: iMSNC, number of axes: 3, This 3-axis MicroStep AquaCut-W 4001.20 was manufactured in 2018. It features a working range of 4,000 x 2,000 mm and is equipped with a high-pressure pump system capable of 400 MPa. The machine includes automatic height control for the cutting head and a waterjet cutting table with grid support. If you are looking to get high-quality waterjet cutting capabilities, consider the MicroStep AquaCut-W 4001.20 machine we have for sale. Contact us for further details. Iiedpfxjy Ui Hpj Anwsc - CNC Control Unit: MicroStep iMSNC with MMI console, 24" touchscreen, and two LCD operator units on the gantry- Working Range / Processing Area: 4,000 x 2,000 mm- Laser Pointer: Laserpointer with automatic offset transmission- Control Modules: Expert system, Service & Maintenance wizard, CNC program loading wizard, Automatic mechanical scanning calibration, Cutting program management (MRP), EcoInfo, MachineInfo, User-Management- CAM Software: AsperWin Basic, AsperWin Select macro library, AsperWin NC-Sim simulator- Connectivity: USB 3.0 port, MicroStep Remote Diagnostics, TeamViewer access, GSM Modem for SMS error notifications- Cutting Table: Waterjet cutting table with grid support- Height Control: Automatic height control for the waterjet cutting head- High-Pressure Pump System: BFT ECOTRON 40.37- Pump Permissible Working Pressure: 400 MPa (4,000 bar)- Pump Max Flow Rate: 3.8 l/min- Pump Tank Capacity: 140 liters- Pump Power Consumption: 39 kW (at 3*400 V, 50 Hz) / 46 kW (at 3*480 V, 60 Hz)- Pump Gross Weight: 1,110 kg- Pump Serial Number: 16414- Pump Drawing Number: 120343- Cutting Head: Allfi Cutting Head Type IV (1 unit)- Abrasive Head: Allfi Abrasive Head CENTERLINE Typ II "Long Life" (1 unit)- Abrasive Systems: Allfi Abrasive Dosing system, Allfi Abrasive Conveying System Type II, Automatic abrasive dosing via CNC- Sludge Removal: Desludging system (scraper conveyor) for 4,000 mm length, including sedimentation tank- Water Conditioning: Water stabilization dosing unit using WIN2054Si water chemistry- Safety Equipment: Double-sided cable pull safety mechanism (collision protection) via Emergency Stop- Total System Layout Footprint Dimensions: Approx. 7,122 mm (Length) x 4,200 mm (Width) (Main machine footprint alone is 7,122 mm x 3,476 mm)- Required Flooring Base: Concrete min. B20, thickness min. 200 mm, surface evenness ±5 mm

Year of construction: 2018, condition: used, x-travel 4000 mm y-travel 2000 mm z-travel mm 4000 bar total power requirement 35 kW weight of the machine ca. t dimensions of the machine ca. m MicroStep CNC water jet cutting system AquaCut-W 4001.20 with the following features: • BFT high pressure pump ECOTRON ® 40.37 • Desludging system (scraper conveyor) for a length of 4,000 mm • Water softening using water chemistry 1. MicroStep CNC guide machine AquaCut-W 4001.20 (4,000 x 2,000 mm} MicroStep® machine control with MML console and 24 "touchscreen Two LCD operating units on the portal Laser pointer with automatic offset transmission iMSNC® module / expert system iMSNC® module / assistant for service and maintenance work iMSNC® module / assistant for loading CNC programs iMSNC ® module / automatic calibration of mechanical scanning iMSNC® module / management of cutting programs (MRP} iMSNC® module / Ecolnfo iMSNC® module / machine info iMSNC® module / user management "AsperWin Basic" programming system for programming directly on the Machine control Iedpfsg N Nlvsx Anwoic "AsperWin Select" macro library module Mod ul NC simulator "AsperWin NC-Sim" 2. USB 3.0 connection option for storage medium 3. Remote maintenance module MicroStep RemoteDiagnostics® Remote maintenance access through TeamViewer 4. Water jet cutting table with grate support / 4,000 x 2,000 mm Working area 5. Automatic height control for the water jet cutting head 6. BFT high pressure pump ECOTRON ® 40.37 7. Automatic pump control 8. Allfi® cutting head type IV (1 piece) 9. Allfi® abrasive head CENTERLINE type II "Long Life" (1 piece) 10. Allfi® abrasive dosing system 11. Allfi® abrasive conveyor system type II 12. Automatic abrasive dosing via the CNC control 13. High pressure installation material for connecting the high pressure pump to the existing water network 14. Error messages via SMS via the iMSNC control 15. GSM modem for the iMSNC control 16. Double-sided rope protection (collision protection) over the portal bridge Emergency stop switch 17. Desludging plant (scraper conveyor) for a length of 4,000 mm 18. Water stabilization by means of a metering device and addition of Water chemistry 19. Water chemistry WI N2054Si 20. CAM software "AsperWin Basic" for programming

Condition: new, Year of construction: 2023, Technical Data INPUT Sensor supply US 24 V DC (EN 61131-2), max. 200 mA (M12 female), short-circuit and overload protected Type for 3-wire sensors or mechanical switches, PNP Iodpfx Anslu E Hmswsic GENERAL DATA Mounting method 2-hole screw mounting Temperature range 0...+55 °C (storage temperature -20...+70 °C) Protection IP67 Dimensions H×W×D 56.2×63×225 mm DIAGNOSTIC Communication status via LED Diagnostic via BUS per module and channel Diagnostic via LED per module and channel Actuator warning per channel via LED and BUS Monitoring - under voltage yes Monitoring - no voltage yes Short-circuit and overload yes Cable break per port PROFINET Specification V2.2, Conformance Class C (IRT) Addressing DCP FSU (Fast-Start-Up) max. 500 ms PROFINET Netload Class III MRP yes Shared Device yes, for 2 controls CONNECTIONS Fieldbus Ethernet 10/100 Mbit/s; 2× SCRJ45 POF Push Pull Sensor-system/actuator supply Push Pull Power connector, max. 12 A I/O ports M12, 5-pole, A-coded PARAMETERIZATION PIN 4 Input PIN 2 Input 3 pcs available 450€ / pc